How are people with older systems supposed to enjoy ITunes?

I have Windows ME, yes I need a new PC but can't now. Is there an ITunes that works for ME, or will there be one????

No. Not the answer you wanted hear, but that's it.

Similar Messages

How are people connecting Mainstage to their PA systems?

How are people connecting Mainstage to their PA systems? I'm running my electric guitar into my MBP with a 1/4 jack and an adapter and am coming out of the headphone jack into a DI box and then into the sound system. On some patches I'm getting a lot of noise/unintended distortion and our sound guy is unsure of what to do, ( tried adjusting gain to no effect). is their a better way to route things?

Great Grains,
<< But what is the real advantage over the 1/4 adapter? >>
I don't know the presonus specifically - I have an RME and a Duet - but with an interface the advantages are; better converters = better sound, less latency (not 'no latency' but definitely a lot less),
better impedance (better plugs basically) for PAs, flexible outputs (stereo, multi channel, etc).
Realistically the little 1/8" ins and outs out on a computer are not very good, esp for real instruments, and there is tons of latency.
As to your question about Stereo mono and what to send the PA:
There's no real reason you can't send stereo (L+R, 1+2, whatever) to the house PA if you want. Depending on what level sound people you're dealing with some of them may not be open to running you stereo, esp if you play guitar and they are... let's say, set in their ways. They also may have limited a number of inputs. At higher level venues the PA rigs and sound people will do anything you want, do it really well and have a good time doing it.
To run mono;
1. In mainstage, put a gain plugin on the output channel and select 'mono' within the plugin.
2. Send one output (typically left for mono, but either is fine) of your presonus to the PA.
You can change from mono to stereo instantly with this setup (by selecting or unselecting mono within the gain plugin) to adjust for different situations.
-R

How are people searching for music now that the power search link is gone?

How are people searching for music now that the power search link is gone?

That info in my above post doesn't bring back Power Search
I think this Discussion holds the answer https://discussions.apple.com/message/20451945#20451945
Found it under iTunes U! Don't know why the moved it from the main page but you will find it here.

There are people sending e-mail messages asking for itunes account actualization.

There are people sending e-mail messages asking for itunes account actualization.
they send an email asking for account actuaization in this address x-apple-msg-load://DF2DB820-144D-4311-8E1A-098D8ADC9780/www.timingcivilworks.com /appel.php then you are redirectec to this addres http://www.jeanmarcfessard.com/Itunes/Confirm-Your-Account/Login-Apple.Service/Y our-Identity/sa/index.php where they ask for your complete information. be carefull

Forward the email to [email protected] and Apple will take care of it.

How to integrate with RMS system

Hi experts,
I want to integrate RMS(Retail Management System) with SAP PI system.
Is it possible to integrate?
If possible, Can you give me Idea How to integrate with this?
Thanks & Regards,
Poonam.

> Want your more help. If I want to use SOAP adapter to integrate with RMS system.
> So, what are the prerequisites are required in RMS system to be integrate with SAP PI through SOAP adapter?
>
Fist you have to make sure that RMS system showuld accept SOAP messages, that means u will send payload to RMS in the form of SOAP meesage using SOAP receriver Adapter.
RMS system people have to provide URL , u will send data to address specified in URL.
using Adapter is compmetely depend on Source or Taget system, betetr to talk with RMS system people like how they will take data from other systems,besed on that you can decided.
Regards,
Raj

I play a game called airwings, which is a multiplayer game. Especially since ios8. Many of the players are experiencing lagging, skipping issues which make playing difficult if not impossible. These are people with excellent internet connections.

Someone at Apple please explain to us or even explain to the game developer, Brian Greenstone, why especially since ios8 there is terrible lag and skipping in this game making it unplayable for many players. These are often people with lightening fast internet speeds. We have all tried deleting and reinstalling the game, rebooting routers, resetting network settings, etc. The developer says he doesn't know why this is happening and he said Apple has no interest in fixing the problem. He doesn't get "apple love". .??

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

How are people performing virus scans on uploads?

I am going to be starting an application shortly that will accept uploaded files from 3rd parties. Luckily they will not be annonymous but you never know if a friendly source may have become infected without thier knowledge.
So my question is how are other APEX developers ensuring that the files they receive are clean? Does running a real-time AV on the webserver scan temporary files hitting somewhere under /www or does APEX load each bit directly into the BLOB, effectively bypassing scanning? I've searched a bit but was unable to find anything concrete here on the forums.
I'm debating dropping the file to the file system for scanning before it is accessible by our internal users but if that is unnecessary I don't have to worry about it.
Thank you,
Kelley

Kelley,
Another option (in addition to those suggested) is to integrate with a content scanning service that supports the ICAP protocol, such as Symantec:
http://www.symantec.com/business/products/overview.jsp?pcid=2242&pvid=836_1
Essentially you let the user upload the file, then stream it across using UTL_TCP etc to your scanning service and check the result that is passed back (depending on your server setup you can choose to scan for viruses and/or check for content type to detect certain 'categories' that you might want to block).
It requires a bit of leg-work on you part to code the streaming, but it's not too bad once you understand how the ICAP protocol works (it's just a protocol that you need to learn to send the correct information to the server and know how to receive the content).
Hope this helps,
John.
http://jes.blogs.shellprompt.net
http://apex-evangelists.com

How are people on ebay and the web factory unlocking iPhones?

Hi,
Can someone please shed some light on how people are offering factory unlock services for any iphone on eBay and on the internet? It seems to cost roughly the same through most of them (£40-50 for Orange UK).
The reason for this question is that my brother does mobile phone repairs and unlocks, he has a device that will unlock Blackberry's and other phones, although he has never been able to find out how it works with the iphone. From my understanding the iphones IMEI has to be submitted to the Apple whitelist. If this is correct, how are these 3rd party companies doing this? Do they pay for access to the list or do they know somebody on the inside? I was of the opinion that only the official carrier could perform a factory unlock, obviously im wrong!

That was my thoughts exactly, but how would you explain this site then? www.megara1n.com It is not installing any software on the phone and upon reading the reviews for it, it is not a scam and seems to be using the Whitelist as it does not lose the unlock when updating. This is just one example, there is a guy using the same method on ebay with over 500 sales and 100% feedback. There must be another way they are doing it. There are scammers on ebay asking for people to send their phones in to them which im sure will either be jailbroken or never returned!
I am aware of the un-authorised methods of which you speak, jailbreak, gevey sim etc and I know that these methods used above are none of these.
<Link Edited By Host>

How are peoples replacement iPhone 4's?

Im thinking of replacing mine because of a yellow spot and a wiggly home button but 9/10 displays were wiggly too so my question is how are all of your replacements compared to the one you had before?

Wankirby wrote:
iPhoneMac5 you're full of it. you expect us to believe that you just walked in a store and they just happened to have a phone waiting for you to exchange eh? yeah when 1,000s of people who pre-ordered(me) and people who are on apple's in-store "priority" waiting list are still waiting for their phones?!? C'MON SON!!!
the kicker is where u ask,
iPhoneMac5 wrote:
hace you gotten a replacement? cant i just test out the replacement with mine to compare?
why are you asking this if you've already been to the store and exchanged phones already?
you're a liar, and a bad one at that
Why don't you think or do some research before ripping someone or calling someone a liar? Yes, Apple Stores do carry a stock of iP4's dedicated solely for replacing problemattic or non-functional phones that people have already purchased and paid for. Don't believe me? Call your local Apple Store and ask them!
You see, I know this for a fact. How, you say??? Because I went through this very process myself. I was lucky enough to get in on the first wave of iP4's and received mine on the 24th. Unfortunately, it had a screen issue and suffered from the 'No SIM' issue. I called our local Apple Store on the 28th to ask if I could get it replaced fully expecting them to say I had wait since ATT and Apple shutdown pre-orders due to the high demand. I went in the next day, calling numerous times and speaking to numerous people just to make sure they did in fact have stock and I wouldn't be turned away when I got there, and what do you know, they got me in and out of there in 10 minutes with a brand new replacement unit.
I had a buddy of mine on the order waiting list so I asked the Genius if they had any units available for purchase. He said no they sold out of the "for purchase" units the day before and only had a stock for replacing malfunctioning phones. So yes, son, they do carry a stock of replacement-only units. Shocking, isn't it!?!?!!
What, do you really think Apple is going to tell people who ALREADY own the phone that they can't get a replacement if it's bad? The manufacturer has to honor the warranty buyers have already paid for. Sure, people who don't already own the phone are upset that the stock is low and demand is high and they have to wait. But what do you think would happen if people who have already purchased the phone and find they have a bad unit and Apple can't live up to the warranty that they contractually agreed to at time of purchase? Can you say lawsuit? I'm not a lawyer, but I don't think Apple can get sued by someone on the waiting list over the limited stock issue. However, they can certainly get sued over not honoring a full-service new item warranty contract.

Realisticly:how much OC with my system?MSI GNB MAX

Ok, How much OC I can get, with my system, if I change the 1.5ghz 266DDR Value RAM to something better. Any suggestions.
I plan to ditch the ram for something better, but my mobo, and CPU aren't that fast compared to the C, and E, and the 64 stuff.
I am using the 2.8B, E7205/i7205 mobo.
Only fan cooling. Using the pipe101, will place the tornado on it. Does the vantec fan card improves my GF performance.
I am just able to OC my card from 350 to 388mhz, 1.09ghz, others got a 420mhz on a supperior system. All using the inno3d 6800gt.. Or I'm looking at an "old" system already.
The OC FSB is just up to 153. I read somewhere that it is useless/not worth to OC this system.
So what do you think?
my system is in the signature

I would not push further than 160 FSB, you can corrupt your disks since PCI /AGP are not locked. Usually PCI frequency above 38 MHZ is not considered safe and 150 FSB corresponds to 37.5 MHZ PCI frequency. I corrupted my 30 GB WD at 160 FSB.
I have GNB Max, P4 3.06HT, 2x 512MB KVR DDR333 (CAS2.5 rated). I oveclocked the system to 150 FSB, P4 is running as 3.45GHz@600FSB (HT is on), with dual channel DDR300 memory (2-3-3-6 timings). System is 100% stable after testing with Linux kernel compile, Prime 95, 3DMark benchmarks. The performance gain in CPU intensive benchmarks is almost the same as increase in FSB frequency, which is 12.5%, since RAM overclocks in sync with CPU.
If you settle at 150 FSB, your DDR266 will be running as DDR300. You can test it with its given SPD values and if not stable you can reduce CAS setting one step, i.e. from CAS2.5 to CAS3. If none of these are possible, you can upgrade with DDR400.
I use Vantec Fan card with my GF4, but it did not help me increase my overclock. However, I removed the fan on my GF4 (heat sink is not removed just the fan) after trying to increase the overclock. Vantec Fan card is much more silent compared to the Thermaltake fan and copper heat sink combo. I still can overclock as before but do not need to put up with the noise of Thermaltake fan.
Hope this helps
My Config:
MSI GNB Max FISR
P4 3.06 HT (SL6PG) (oc 3.45@600)
2X KVR DDR333 CAS2.5 (running as DDR300 2-3-3-6 timings)
Compro Personal Cinema GF4-Ti4200 64MB (oc 285/570)
SB Live!
DLink 802.11b wireless PCI
Seagate 80GB EIDE (Windows XP SP2)
WD 30GB EIDE (Slackware Linux current)
NEC 4X DVDR/RW
Sony 16X DVDROM
etc

How to work with file system in linux within a JSF app?

I use this line in my backing bean to log some events:
FileHandler fhxml = new FileHandler("../webapps/MyWebApp/Log/MyWebAppLog.xml", append);
fhxml.setFormatter(new XMLFormatter());That works fine in windows but when I deploy it in my Tomcat 6 in linux It doesn't work. How can I work with file system in linux?

You should never use relative paths to access the filesystem. The path would be relative to the current working directory which is not per se the same in all environments. To convert a relative web path to an absolute file system path, you need ServletContext#getRealPath(). Use this absolute file system path in the java.io stuff. In a JSF application on top of Servlet API you can get the underlying ServletContext by ExternalContext#getContext().
Alternatively, if the file is located in one of the default paths of the classpath or if its path is added to the classpath, you can also just use ExternalContext#getResource() or even #getResourceAsStream() using just the file name.

How are people finding me and sending requests,is ...

again how are strangers finding me and sending friend requests. is there somewhere they go like a master contact list of all skype customers

kol wrote:
again how are strangers finding me and sending friend requests. is there somewhere they go like a master contact list of all skype customers
no such thing. unfortunately, scammers and spammers are extremely resourceful people.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

How are people monitoring this forum?

I've stopped regularly checking everything out here. I used to get a digest a few times a day and quickly scan everything. Now there doesn't seem to be anyway to get a digest and I don't seem to have the motivation to check the board very often. Just wondering how other people are handling it.

MICHAEL! Hey...it has been a while.
Yeah, I miss the digests too, but now I just visit the site and...well...read everything. How I find the time, I have no clue.
And the automated e-mail notifications no longer include the responses in the forum...then tell you to go and read it yourself.
sigh.
And reputations are still gone.
double sigh.
Shane

How are people using ZFS?

I made the switch from an mdadm controlled RAID5 to ZFS. I am curious how others are using ZFS. I watch Ben Rockwell's talk on ZFS[1,2] and am finding that I am not using most of the advanced features it offers. It got me wondering how others are using it.
My setup: 3 HDDs in a RAIDZ1 in a dedicated box. I am not using snapshots, or other advanced features. I literally have all 3 drives mounted to /mnt/zpool and that's it.
How I use it: I boot up the NAS once or twice a week and run shell script that uses rsync to move over pics, videos, files, etc.
I guess I could create a vdev under my zpool specifically for documents, and enable snapshots for just that part of the zpool. The majority of my content is user generated images which will not change.
1. http://www.youtube.com/watch?v=3-KesLwobps
2. http://www.youtube.com/watch?v=jDLJJ2-ZTq8
Last edited by graysky (2013-10-18 15:34:55)

I use ZFS on a FreeBSD file server using 3 mirror pairs. I decided to use mirroring instead of raidz because drives are cheap, you get better read performance, and the zpool grows easily over time when failed devices are replaced with larger ones or extending with more pairs. I also use snapshots and ZFS send/receive for incremental backups over the network.

2 people with different taste of music, using ITunes on one computer.

How do two people with two different I-pod devices use ITunes on the same computer without seeing the other persons song library?
Story: Our house has one computer. Mom has a Nano and likes older people music; kid has I-pod Touch and likes young kids music. When I import my music CD's, the songs get mixed in with my kids music and auto sync puts all our music on both devices. ( I would like to Auto sync my device because I am not real good with computers and auto sync'ing would be easier; I think ). If I created 2 different Library files, how would I get the auto sync for my Nano to sync with my library?

Hi nanonewbee,
Better to create separate playlists and then (bite the bullet - this is a lot easier than trying to create a second library)....plug in one of the devices. Click on the device and when the "device Profile" screen appears:
- Click on the Music tab
- Check the "Sync Music" option
- Check the "Selected playlists, albums, artists, and genres button
A list of your Playlists will appear in the box below. Check only the playlist you want for that device.
Smart Playlists are easier because you can set them up to automatically put new music into the correct playlist. But they are a bit more involved than regular playlists.
For regular Playlists, just drag and drop the music you want in it from the library to the playlist on the sidebar.
Cheers,
GB

How are people with older systems supposed to enjoy ITunes?

Similar Messages

Maybe you are looking for