How are some guys running an Athlon 3800+ X2 chip on the K8N Neo4 Platinum SLI?

I see many people running an AMD Athlon 64 3800+ X2 Dual Core proccessor on a K8N Neo4 Platinum SLI board, but mine dosen't work. I don't get any signal to my monitor (don't know if this is the cause). MSI says the 3800+X2 dosen't support the SLI board, but many people got it to work. Any one know how?

Mine working fine, but on cold boot, sometime it hang on me. I have changed 3 PSU to get it stable, from Coolermaster 450W, Be Quiet 520W to Silverstone 650W, ambient 25C, CPU 30C, Proc 37C.
Bios 3.7 the one they are still testing.
Have you check you PSU rails volt., disable CnQ,....
So far stable, multiple programs at once with no significant drop in responseness & speed, Half Life 2, P2P downloading x2, IE x 3, encode DVD at the same time.

Similar Messages

X2 3800+ (E6) support for the K8N Neo4 Platinum/SLI

Hi everyone:
I have decided to purchase the K8N Neo4 Platinum/SLI (MS-7100-020) and I ready placed the order. However, I wonder if it supports the AMD X2 3800+ (E6 Version) CPU? The reason I asked the question because I found the following table from the Taiwan MSI web site which shows that X2 3800+ E6 is undertesting.
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=641&kind=1
Thank you for any replies.

Mine worked, ran for 2 weeks already at stock, tried & ran to 2.2GHz on stock HSF with no problem.
Using X2 3800+ E6, MSI K8N PLI Platinum mobo, 3.7 bios & Inno3D 7800GTX single latest nvidia 78 drivers, 2x512MB DDR400 CL2.5 Kingston Ram, Hitachi T7K250 Sata 250GB HDD, NEC ND-3530A Benq 1640, , Silverstone Zeus 650W PSU
At first I have this concern too, but tried it anyway.
See my screenshots for your info.

Anyone get 2gb Memory to run at 1T in K8N Neo4 Platinum SLI MB?

I recently upgraded to 2 GB Geil memory in my new K8N Neo4 Platinum SLI system (not the system listed in my signature). I cannot get it to boot if I set Ram to 1T.
Has anyone been able to run 2GB at 1T in this MB?
Thanks.
fafner

Thanks all for your comments.
I have the Geil Value 2x1gb dual channel kit. It is rated at 3, 4, 4, 8. I can get it to run fine at 3,3,3,8 at 2T. I cannot get it to boot at 1T with either the rated settings or the faster settings. It will boot at at 2.5, 3,3,8, but is not stable.
I can exchange this kit for a higher quality kit, but I don't want to do that unless someone else has had success with runing 2x1gb in this Neo 4 Platinum SLI board.
The memory I have runs at 1t in my K8Neo2 system as my does my Kingston Value RAM (2x512). It so happens that I have 2 Kingston value kits (total of 4x512), which I could try but everything I have read says it will run at 333mhz with four stix.
My experience has been that the K8N Neo2 Platinum is more accepting of value memory in general than the K8N Neo4 Plat/SLI. I have also read that getting any 2x1gb kit to run at 1T in the Neo4 Platium/Sli board is impossible or at least nearly so. That is why I am looking for soneone who has success (or no success) with 2x1gb sticks at 1T in the same mb as mine.
Net I want to get the best 2gb configuration possible but onle one that someone already has experience with (since I can only exhange the Geil kit once).

Will the X-Fi Fatal1ty run on the MSI K8N Neo4 platinum SLI Bo

Hi there i was just wondering becasue i have heard some things that it wont run together very well and some people say that it works sometimes and then kicks out. Feedback would be greatly appreciated. Thanks Aaron

Hi Aaron,
The problem described in the "X-Fi Problem (rebooting)" thread does not affect the cards that have X-RAM.
I have a slightly different version of that board at home (MSI K8N SLI Platinum, not Neo4 model) and I'm running an X-Fi Fatalty FPS card on it, with no problems whatsoever.
Cat

K8N Neo4 Platinum SLI + athlon 64 3400+ ????

I want to know if someone has try to put a A64 3400+ on this board, does this CPU works on this board please ?

The Athlon 64 3400+ 939-pin processors are available in OEM versions only. So warranty coverage for the Athlon 64 3400+ 939-pin processors must be directed to the vendor and not to AMD... in addition the HyperTransport Link speed for the 3400+ is limited to 800MHz as opposed to the 3500+ speed of 1GHz.
The Athlon 64 3400+ 939-pin processor has technical specifications very similar to that of the Athlon 64 3500+ ... for this reason this processor on socket 939 its really hard to find...
better go for the athlon 3500!

Firewire/1394 devices are not auto-detected with k8n neo4 platinum

I am unable to detect firewire/1394 devices to my PC through my K8N Neo4 Platinum. That is, I plug in the device through the firewire port and windows doesn't detect that a device has been plugged in.
I have tried:
-2 firewire devices, both are Canon digital camcorders (ZR10 and ZR25MC)
-2 different firewire cables
-reinstalling windows, got all windows updates except
(Microsoft Base Smart Card Cryptographic Service Provider Package: x86 (KB909520))
-patch from microsoft, discussed here
(https://forum-en.msi.com/index.php?topic=81749.0)
-both firewire devices using both cables connect just fine to a test computer
-both my computer and the test computer have Windows XP Pro SP2
Windows doesn't make the noise "bah-dum" that it has detected a device, nor does it display the dialog that gives me options of what programs to use. Once in a while, if I leave it connected for a while and come back, windows will eventually find it...or windows might bog down and get really slow. It speeds up again instantly once I unplug the firewire device. Strange, I know. Also there are NO conflicts in device manager.
Could it be?:
-bios misconfiguration
-need to use an older chipset driver (i am using most recent from nvidia.com)
-onboard audio or front audio needs to be disabled
-the k8n neo4 platinum simply has connection problems with some firewire devices
(i hope not)
Bob

Built2Last: (good questions!)
I tried your suggestion by removing PCI cards and made FURTHER progress. I found out that my firewire card, the Syba NEC1394-P3, has some compatibility issues with my other PCI cards. I found this out because:
1. it worked fine after I placed it in a non-comm (orange) slot and removed my soundcard (X-Fi) and Belkin wireless modem, and
2. a tech support representative from Syba told me that that particular firewire card has compatibility issues
Quote
Also, SD-NEC-4F is our older model firewire card.
Our new firewire card (SD-PCI-4F) is using VIA VT6306 chipset and no customer complain about any installation issue so far.
If the SD-NEC-4F still giving you trouble, I'll suggest you to return it and exchange for the SD-PCI-4F firewire card.
At least he is honest and wants to help, so I remain impartial towards Syba.
So I figured out the firewire card, but not the onboard firewire. Ok, but check this out! When the Syba card was working, I could plug in BOTH the external hard drive AND either of the Canon camcorders to the Syba firewire card. Windows all three devices just fine. Again, the onboard firewire would ONLY detect JUST the external hard drive, but would not detect either of the Canon camcorders. It seems as though the ball again is knocked back into MSI's court on this issue. Any ideas?
syar2003:
As for drivers, I checked for drivers for: onboard firewire, add-in firewire card, and Canon camcorders.
-I cannot find where there is an MSI firewire driver for my onboard firewire port. I originally guess that it was part of my chipset driver installer, but the README doesn't say anything about it. It is also not an additional download on MSI's website. But since it detects an external hard drive I figure I must already have it.
-The add-in firewire card does not have drivers. I repeat, they do not exist. The manual and Syba's website both state that drivers for the card are included all versions of Windows back to Windows 98.
-Canon's website has a driver/software download page but it also appears that drivers do not exist for the Canon camcorders.
Yes the camcorder is set to VCR mode.
Yes the IEEE1394 is correctly installed, since external hard drive connects okay.
I tried two DV cables and both are connected fine.
The camcorders do not support USB as far as I can see, and if they do, I'm not using it.

Hey how are you guys listen i have an iphone 4s the one i use with the H20 CARRIEr and i trying to enable the option call forwarding and when i type tho number i go back and i notice to the call forwarding it turning off as soon i back to the main menu ?

hey how are you guys listen i have an iphone 4s the one i use with the H20 CARRIEr and i trying to enable the option call forwarding and when i type tho number i go back and i notice to the call forwarding it turning off as soon i back to the main menu ?

There are a lot of posts in the forums today with people having problems with iMessage. There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
I would just wait it out - I'm sure it will be sorted out soon.

Hi there how are you guys out there of this forum? I got a question for y'a

Hi there how are you guys out there of this forum? I got a question for y’all
I wanted to know how I could record different folders using iTunes
Cause when recorded 2000 thongs on the DVD
There were 2000 songs to go through
So I really wanted to have had folders and then the music recorded inside them
So I could get right to where I wanted real quickly
Could anyone please teach me how to do that real quickly?
Can we do it with iTunes?
I know we can do it with Nero.

1) Go to file, select new playlist. Creat the playlaist.
2) Download your music into iTunes.
NOTE: CHECK 'Recently Added' before you download your music.
If the select boxes has a check in them, turn it off by
holding down the 'ctrl' key and selecting one of the
checked boxes. This shold turn off all the checks.
It would be better to clear 'Resently Add' of all
previous downloads, but I don't know how to do that
yet.
3) under 'PLAYLIST' on the right, select 'Recently Add'.
all of your song should show there with a check in the selection
box.
4)Hold the shift key and select the frist (selete records name),
then the last recorded tune. All of the recordings shouls light
up blue.
5) While holding the 'shift' key, drag one of the records to your new
playlist. All of the blue highlighted song will transfer to the new
playlist.

How are you guys powering your laptops in your cars ???

Hi guys,
Although I have been using computers since the first pc appeared, I only recently decided to get a laptop. I got a Lenovo B560 and have been absolutely delighted with it.
However, I am perplexed at the fact that there does not seem to be any easy options for using the laptop in the car on long trips etc ? I do not see any type of 12 volt adapter listed in the accessories ?? A google search shows a few "generic" brand power converters but I have always been leary of using anything but oem type equipment.
Anyway, how are you guys powering your machines while mobile ??
Thanks,
Bill

http://support.lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=MIGR-72900
Your tip size is 2.5mm x 5.5mm, 19volts, and your current adapter is 90watts, right?
Your tip size is the same as what is in the y450, y460, y550p, y550, y560, and the y730.
The y730 is listed under the adapter listed above as taking the 4R 4319 tip, which is the same size as yours.
The tip, Pt. # 46 4319 is listed as an optional tip for the ultraslim adapter, Pt. #4IN8460, that tip has to be ordered separately from the adapter, it doesn't come with it.
Scroll to the bottom of the link for the adapter and you'll see the listing for the 19 volt tip, pt. #4R 4319.
All this is assuming that you have integrated graphics.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How put some PDFs in Acrobat Reader on iPad ? On the Adobe Cloud ?

How put some PDFs in Acrobat Reader on iPad ? On the Adobe Cloud ?
Thanks !!

pierreswaggy,
If you have a PDF document opened in some other app on your iPad/iPhone, you can use the "Open In" feature to open it in Adobe Reader for iOS.
For iPad, see How to open PDF documents in Adobe Reader for iOS (iPad on iOS 7 or 8 version)
For iPhone, see How to open PDF documents in Adobe Reader for iOS (iPhone on iOS 7 or 8 version)
If you have PDF documents on your Mac or Windows desktop/notebook computer, you can use Acrobat.com (cloud storage) to share them with your computer(s) and mobile device(s).
On your Mac/Windows computer
Open a web browser.
Go to Acrobat.com (https://cloud.acrobat.com).
Sign in with your Adobe ID.
Upload your files to Acrobat.com.
You can also use the desktop version of Acrobat or Adobe Reader to open a PDF document from Acrobat.com or save to Acrobat.com. Please check the File menu or the toolbar for the options.
On your iPad/iPhone
Launch Adobe Reader for iOS.
Go to the Reader home screen.
Tap My Account (in the lower left corner).
Sign in with your Adobe ID.
Tap Acrobat.com in the left pane to see the files on Acrobat.com in Reader.
If you have a lot of large PDF documents on your computer, it would be easier and faster to transfer them to your iPad/iPhone at once (instead of one document at a time) using iTunes.
See How to transfer PDF documents from your computer to your iPad/iPhone.
The documents transferred to your iPad/iPhone using iTunes will appear in the Documents section. Because they are stored locally on your iPad/iPhone. Please note that any locally stored documents will be erased by iOS, if you uninstall (instead of update) the Reader app.
Please let us know if you have additional questions or any problems.

Hi, how are you? I have a question. I bought the ringtone "Dancing Queen" once but it charged me 7 times. How can I remove the 6 other purchases?

Hi, how are you? I have a question. I bought the ringtone "Dancing Queen" once but it charged me 7 times. How can I remove the 6 other purchases?

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

K8N Neo4 Platinum (PCB 1.0) and AMD 64 3800+ X2

Help!
I have a K8N Neo4 Platinum (PCB 1.0) and it had an AMD 64 3200+ single core CPU.
Now I've upgraded to an AMD 64 3800+ X2 dual core but the BIOS and MS Vista are seeing only the one core.
The BIOS is at the latest version - 1.D.
Whats' going on?
Hitch.

Quote from: hitchhiker on 20-April-07, 08:44:57
This motherboard does support the X2 CPU right?
It's listed as supported on the MSI website but has nayone else got both cores running on it?
Hitch.
Yes it does support X2
Did you clear cmos with power cable disconnected from psu?
Look at my signature for link to proper method.

K8N Neo4 Platinum, how to move MBR to sata (make it drive #1)?

I am not sure I am phrasing the question correctly, so bear with me. I have a K8N Neo4 platinum with the SiI3114 controller and sata ports 4-8 (I believe its what they are calling PCB 1.x) with bios v1.D. I moved the board to another box and installed winXP on it. I was running it with IDE hard drives. Everything was working great but the OS was running really slow so I bought a SATA 300 mb/s drive and pluged it into SATA1 (I read about using ports 3 and 4 for raid but I do not want to use the NVraid at all, it is disabled). Then I proceeded to reinstall win XP. In the setup, I deleted the original C partiton and created one on the sata drive and rebooted so that there would be no "C" drive confusion by the winxp setup (have had that problem before and this keeps it from happening). Went through the setup and the sata was correctly reported as "C". Told windows to install itself there but it told me that it needed to write to MBR on the old c drive but that, since I had deleted the partiton, it couldn't and had to format it. So I knew that something was wrong.
So I rebooted and disabled the ide bus that contained the old IDE drive and just left the CD ide bus enabled. WinXP installed fine with no complaints. Then it rebooted and I re-enabled the ide bus in the bios. It wouldn't boot into the partiton I just installed winxp on! To get it to boot, I had to use F11 (the bios boot menu) and select the sata drive. Went through the whole setup winXP thing and rebooted. Same problem, it wouldn't boot the sata drive. :(
As long as that ide bus with the old ide drive is enabled, it won't boot the sata drive! I have rearranged the boot order on the bios every way possible. I opened up the box and moved that ide chain with the old ide drive to the ide2 port and put the dvd drive on ide1. I made the old drive slave and the prior slave master. That didn't fix it either. How do I tell this motherboard that the 1st drive is the sata drive? How do I tell it the MBR should be there not on the old ide drive? How do I fix this? Thanks!

Thank you for your replies! Hans, thank you I will give it a go again doing full formats all the way. I usually use the full format when installing winXP but I did things in a different order than you instructed so I will definately try it.
Aicjofs, thank you, There are 3 hard drives in this system currently. There is the ide hard drive that used to be the "c" drive (a western digital 160gb ata133 7200rpm 8mb cache) and a second ide hard drive that is an extended partition with 1 logical drive with data on it (western digital 300gb ata133 7200rpm 8mb cache). Then there is a sata hard drive in sata1 port with 2 partitions one primary and one extended. The extended partion does have data on it as I moved stuff there after I got winXP up the 2nd time (western digital 250gb sata II 7200rpm 16mg cache). Right now, I have the ide drive with data on it as ide2 master and the old "c" drive as ide2 slave and it is unformatted and contains no partion information (I deleted the partition after I installed the SATA drive and installed winXP). XP won't boot. What happens is that, if I take the winxp cd out, it gives me a "no system" error. If I leave the WinXP cd in it boots that disk. However, if I use "f11" and choose to boot the sata drive, winxp comes up just fine. If I disable the ide bus with the two ide hard drives, it boots winxp just fine.
Edit: bios is v1.D. It feels like this mobo is telling windows setup that the master ide drive is the first disk and to ignore everything else. It feels like if I can just tell the mobo that the sata drive is the first disk then everything will work . It is late night where I am now, and I've been fighting with this since the afternoon so I might have to goto sleep but I will be back at it tomorrow and will go though what Hans instructed. If anyone has any otehr ideas, I'd really appreciate that as well.

K8N Neo4 Platinum with Athlon 3200+ wrong multiplier?

I've got a K8N Neo4 Platinum with an Athlon 3200+ processor that's supposed to run at 2.2GHz
With the memory running at 200MHz the maximum multiplier I can select is x10 which only gives me a CPU speed of 2GHz
Shouldn't there be a x11 multiplier available for this CPU or have I missed something obvious?
BIOS is 7125v12

Hi there. A 3200+ S939 is supposed to run at 2000MHz. The S745 runs on 2,2GHz, due to single channel memory.
Cheers!!
3000+ = 1,8 GHz
3200+ = 2,0 GHz
3500+ = 2,2 Ghz

Why are some of my photos showing white when select from the photo roll

Why are some of my photos white when I zoom in on the I tire roll

Why are some of my photos white when I zoom in on the I tire roll

How are some guys running an Athlon 3800+ X2 chip on the K8N Neo4 Platinum SLI?

Similar Messages

Maybe you are looking for