How are valid-from and valid-to dates set in TRPROD table in APO during CIF
First question:
How are the valid-from and valid-to dates set in the APO TRPROD table?
For example, if I activate a transportaion lane model on March 1, 2008, will the valid-from and valid-to in TRPROD be 20080301 and 99991231?
Or are these dates defined in the model itself? Or in APO config somewhere?
Next question:
Suppose I rerun the model on May 1 2008 to add some records that didn't get added in the March 1 run. But suppose I want to back-date the valid-from of these records to March 1, rather than use May 1 as the valid-from.
Can this be done?
Or is the valid-from always the date of the CIF that creates the TRPROD records?
Please advise.
Thanks
Hi Srinivas -
Thanks very much for replying so quickly, but your response didn't answer the questions.
Let me try again.
1)
If I run a CIF on March 1 2008 based on a model that will generate APO TLane data, will the TRPROD valid-from and valid-to get automatically set to 20080301 and 99991231?
2)
If the answer to this question is yes, then is it also true that if I run a new set of records in on May 1, 2008 (no duplications with the original set), then the valid-from and valid-to dates will be 20080501 and 99991231.
3)
But if (1) and (2) are both true (if you answer them both "yes", then suppose I want the May 1 record set to have valid-from dates of March 1 (for example, if the May 1 record set includes records that didn't get included in the March 1 set due to an error in selection criteria). How do I get the valid-from to be March 1 when I run the CIF on May 1?
On the other hand, if (1) and (2) are NOT true, then how DO the two dates get set during a CIF ????
Thanks
djh
Similar Messages
-
How to pass Valid from and Valid to Dates in CS_BOM_EXPLOSION
Hii Experts,
My requirement is to explode BOM using CMC LDB and generating files for all the remaining months by varying Valid from and Valid to dates. For this I am using CS_BOM_EXPLOSION but it has provision for a single date field.
Can you please guide me how to pass both Valid from and Valid to dates in CS_BOM_EXPLOSION ? And if you can suggest any other alternative, its most welcome...
Regards,
VikasHi Vikas,
There is a tables parameter STBP which is of type CSXGEN.
This structure CSXGEN contains two fields valid from date(DATUV) and valid to date(DATUB).
Is this what something you are looking for?
Regards,
Swarna Munukoti -
Hi All,
I have one question w.r.t. risk analysis of user while raising a request in ARQ.
I have noticed that, when a user is assigned 2 conflicting roles in a request (with "Valid From" and "Valid To" fields being the same), ARQ shows risk violations properly.
This is quite logical, because user is assigned conflicting roles within the same dates.
In another scenario, if a user is assigned 2 conflicting roles in a request (with "Valid From" and "Valid To" fields being different)
Example:
Time Administration : Valid From=15.06.2014 and Valid To= 31.12.2014
Payroll Administrator: Valid From=20.06.2014 and Valid To= 31.12.2014
ARA still shows as violations (in ARQ)! Though the "Valid From" dates are different.
Logically, user is not assigned these roles at the same time to cause a risk violations. However, system is showing violations.
May I know if validity dates are considered while performing risk analysis in ARQ? If no, then what could be the justification?
Please advise.
Regards,
FaisalRafal,
Thanks for your reply.
Does it mean that all future dates will be considered while analysis?
OR
Does ARA consider these dates?
Regards,
Faisal -
Valid from and Valid to are not getting copied to follow up document.
Hi Experts,
I am creating job quote as a follow up document from master quote.All are getting copied from the master quote to job quote,but valid from and valid to dates are not getting copied from master quote,instead it is calculating the date from date profile rules.
But I need to transport the dates from Master Quote to Job Quote.
Please advice.
Thanks,
Adi.Hi,
You need to implement CRM_COPY_BADY for that. Please refer to:
Re: create a new follow up complaint to the earlier completed complaint
Regards,
Nicolas. -
Date entered between valid from and valid to it should throw error
HI i have a doubt in the dates see
i have a column for the valid from and valid to date
EXAMPLE
customer cform NO SUBMITTED VALID FROM VALID TO uSER
17 OUIIUYUIY 02.04.2008 03.04.2008 03.12.2008 SAB_BEGUM
WHEN I GIVE the dates in between the period it has to give throw the error
example if i give like as shown below it should pass the error
17 FHGFF2 02.04.2008 03.04.2008 03.06.2008 SAB_BEGUM
now how can i pass and check the the dates, it has to accept ones the date is after 04.12.2008 , in between the period it should throw the error. please help me outhave a look at this:
http://help.sap.com/saphelp_nw70/helpdata/EN/a7/5139ef407a11d1893b0000e8323c4f/frameset.htm
and search for the pre defined events in table maintenance dialog.
generate table maintenance->create a maintenance dialog->Maintaining and changing an existing maintenance dialog ->Extended Table Maintenance Events. -
Table containing 'Valid From' and 'Valid To' dates -- tcode SU01
Hi All,
I want to know the Table containing 'Valid From' and 'Valid To' dates -- In tcode SU01 ---Tab Logon Data there are 'Valid From' and 'Valid To' dates. I want to know the table(s) where this info is stored.
thanks
NavedLooks like you have two userids. Login to SDN using your userid that created the post and assign the points. If you don't see the radio button then change your original post to a question.
Message was edited by: Prakash Singh -
How to change dateformat of VALID FROM and VALID TO properties in xml forms
Hi all,
I have created a news using xml form bulider and i have given lifetime for that news ,also displaying the VALID FROM and VALID TO in news.By default it is in mm.dd.yyyy format but i need to display the dateformat as dd.mm.yyyy in show form.Is there any possiblity to change the format in XSLT or any other solutions.
Regards
BalaHi Bala
Check this XML FORMS - Date Format.
Its a quite easy way.
Regards
BP -
Valid from and valid to properties under history preservation transform
I have created_dt and last_updated both date columns in source table and also in target table.
Now under history preservation transform for Date columns:
For "Valid from" and "valid to" properties: which column should i pick?
how can i use created_dt and last_updated columns under history preservation?
What is current flag property, should i leave this blank if i don't have any flag "bit type" column like indicator in source or target table.
My Dataflow has:
Source_table -> Qry_Transform -> Table_comparison > history_preservation - > Key_gen - > Target_table.Valid from and Valid to in History Preservation transform deals with SCD (slowly changing dimensions).
In most of the scenarios, Valid From comes from the source (as Effective From date) for which the dimension has a particular value.
Eg:
SALES REP, Region, Effective From
A, California, 01.01.2011
Valid To column in History Preservation is the default value that you provide inside. In case of preserving history of an update, Valid To column of the old record can have the Valid From value of the new record, or one day before that. You have option to set the same in History Preservation. -
Name of the table where can get the two fields Valid-From and Valid-to for
Hi gurus
I want name of the table where I can get the two fields Valid-From and Valid-To and their relation ship with the header table in BOM
Regards
KaisarYou can only get the Valid from date from the table STKO.
To get the valid to date, you have to take one day less than the valid-from date of the next record for the same BOM.
Alternatively use the Function module:
CSAP_MAT_BOM_READ
It will give both valid from and valid to dates in the tables parameter: T_STKO
Regards,
Ravi
Edited by: Ravi Kanth Talagana on Jul 2, 2008 4:37 PM -
How to create the verify.der file in portal ? valid to and valid from
hi Experts,
am facing the problem in SAP logon method without user mapping but it's having a problem, The problem is create the Transaction iview it's not there . Back end server is not response how to create the Valid TO and Valid From in portal.
Thanks & Regards
ChanduChandu,
1. Start the SAP J2EE Engine Visual Administrator: C:\usr\sap\<SID>\JC00\j2ee\admin\go.bat.
2. Navigate in the left tree panel to Cluster -Server -Services -Key Storage - Runtime TicketKeystore - SAPLogonTicketKeypair u2013cert.
Here you can go ahead and create a new ticket.
Hope that helps.
Cheers,
Sandeep Tudumu -
How PO validity start and validity end works
In the PO Header (tab Additional data), there are fields: validity start and validity end. The help text states the following:
Start of validity period
Date as of which services can be performed or materials delivered.
In the case of purchase orders:
Start of the period in which the service is to be performed or thematerial delivered.
End of validity period
Date up to which services can be performed or materials delivered.
In the case of POs:
End of the period in which the service is to be performed or thematerial delivered.
I maintained a validity date range 01/01/2007 to 01/10/2007. When i tried to receive the item with posting date 01/15/2007, the system saved the GR without even a warning message that the GR was outside the PO validity date.
How does this field work? Is this standard configuration or does this only work with a user-exit?
I would appreciate any input.
Regards,
Dominiquehi ,
use transaction OMCQ,
set the status of message for M7 163 to error. if this message is not present in the list , then go to new entries and select this message and enter it into the list
after this set the status to "E".
let me know if this works
Regards
Mangesh. -
Validity start and Validity End date in PO
HI gurus
can you plz tell me how to activate validity start and Validity End date in PO
NehaHi,
It is applicable for PO done for Frame work oder with Doc type - FO(Frame work order)as its an agreement of supply of stock only between specified period.For this kind of Doc type system makes it mandatory to enter the valisity start and end date.
Thanks -
I just upgraded to mountain lion osx and now my applications are crossed out and out of date. they will not run. how do i fix this?
Here is a recent post I assembled for a similar question:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
3. Upgrade your software to Intel compatible versions if they are available, or find alternative software that will open, modify and save your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on images to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization. -
Add Validity Start and Validity End On PO Header
Dear SAP,
need your help, I am trying to add Validity Start and Validity End Field on Additional Tab in Purchase Order header.
How do i add this field ?
i already check on MM define screen layout a document level, but there is not setting for this two field.Hi Nizam,
The validity start date & end date are used only for service orders. In configuration goto IMG>MM>Purchasing>PO>Define screen layout at document level and check into Administrative data, header of ME21N , the field selection key attached to your document type (Say NBF) and for field selection key AKTH.
The fields Start of validity period & Validity period end of field selection key ME21N, NBF & AKTH should be set as optional then only required fields will be visible on screen. -
How are labels applied and referenced (they are mentioned in Preferences)
How are labels applied and referenced (they are mentioned in Preferences)?
I searched Help for "labels" and found only one reference - to Preferences, seemingly the only place the plural is used. I needed to search for "label" instead.
I agree the documentation is good, but IMHO, it is not a User Manual; it is a product Reference Guide. The software (A3 especially) is very flexible and comprehensive, so it is very difficult to use it in a workflow, as it will support many different approaches both to organizing pictures and editing them. I can understand why Apple does not document this for photograpers. IMHO they carry this to a bit of an extreme - even their Adjustments are not listed in a logical (to me) sequence. I hope I can adjust this. The Library needs careful planning, and there are no guidelines on how to organize it, just lots of description of its myriad features.
I too use labels to document my progress through my workflow. FYI, here is my old list. I used a different editor for my RAW pictures, and used Aperture to organize finished JPG's only. I'm changing that now, trying to make life simpler. so the process will change. My import software defaulted all pictures to 'maybe' (orange), and my first step was to cull them to bad (red) or selected (yellow) for further editing. However, the label data is stored in different fields by the two manufacturers, so another reason to change.
Thanks for your help
Bad
Maybe
Selected
Developed
Adjusted (to a finished quality)
More (special) editing in progress
Good, can create a JPG for Aperture
Good and in Aperture
Hold for whatever reason
Cheers Bill
Maybe you are looking for
-
hi all, its my first post. i (proudly) own a 3GS and it was syncing and backing up to a computer which is now dead. I wanted to back up my 3gs to a different computer (the new one i had to buy). My main issue is with all my music library (about 1 GB
-
TS1702 iPad won't power off - dialogue box won't disappear
Hi, there is a dialogue box saying 'Your rental movie has expired' and it's asking me to press ok. I press ok but nothing happens. Nothing else works because the dialogue box just stays there. Troubleshooting recommends to power of the iPad, but i
-
Using the remote with PowerPoint
I can get the remote to work with Keynote just fine but it does not seem t work with PowerPoint. Is their a process to get the remote to work with both programs? Thanks
-
I trying to make kde-3.1-rc3 but I'm stuck in the same place as i got stuck while trying to make 3.1-rc1 and rc2. In kdelibs, while making docbooks the compiler returns with an erro in libbz2 (can't find a method __ctype_b). so I searched the net (we
-
Another bug? Failure to lock audio to video
I don't know if others are experiencing this, or if it is just my install... I put a few pictures into the video, dropped a "camera click" into the audio line and locked it to the video. But after further edits of other sections earlier in the movie,