How Are You Holding Up California?

I saw on the news this morning that there are at least 18 major fires all up and down the state.  The graphic looked like the entire state was going down in flames.
Here in the Rogue Valley, it's smokey - extremely smokey from both CA and OR fires.  It's pretty crazy with this heavy smokey haze for days.  I was in Home Depot this weekend and it looked like they had their own weather system in the store. 
Our Fire dept. has been taxed from businesses' false fire alarms going off because it's so thick.  And we've had to put up canopys over the air conditioning units (temps have been up to 109 for a few days).  Aside from that, it's business as usual.
Are you CA folks holding up OK?
This topic first appeared in the Spiceworks Community

psychtaygar wrote:
Have you ever Restored with Winclone? Does it make an image of the ENTIRE partition (if my bootcamp partition is 100 GB, my image is 100 GB), or just the parts that are used?
WinClone always leaves out the pagefile.sys since it is not needed for restore and built up again by Windows on the next restart.
Whether it imgaes the complete partition or only the parts of it that are used by files depends on the settings you make in WinClone.
Regards
Stefan

Similar Messages

  • Hi there how are you guys out there of this forum? I got a question for y'a

    Hi there how are you guys out there of this forum? I got a question for y’all
    I wanted to know how I could record different folders using iTunes
    Cause when recorded 2000 thongs on the DVD
    There were 2000 songs to go through
    So I really wanted to have had folders and then the music recorded inside them
    So I could get right to where I wanted real quickly
    Could anyone please teach me how to do that real quickly?
    Can we do it with iTunes?
    I know we can do it with Nero.

    1) Go to file, select new playlist. Creat the playlaist.
    2) Download your music into iTunes.
    NOTE: CHECK 'Recently Added' before you download your music.
    If the select boxes has a check in them, turn it off by
    holding down the 'ctrl' key and selecting one of the
    checked boxes. This shold turn off all the checks.
    It would be better to clear 'Resently Add' of all
    previous downloads, but I don't know how to do that
    yet.
    3) under 'PLAYLIST' on the right, select 'Recently Add'.
    all of your song should show there with a check in the selection
    box.
    4)Hold the shift key and select the frist (selete records name),
    then the last recorded tune. All of the recordings shouls light
    up blue.
    5) While holding the 'shift' key, drag one of the records to your new
    playlist. All of the blue highlighted song will transfer to the new
    playlist.

  • HT1933 How are you supposed to do this when it DOESN'T EVEN WORK!!!! you press report problem and it comes up saying " too many http redirects". Total useless !

    How are you supposed to REPORT THE PROBLEM when it DOESN'T EVEN WORK!!
    I clicked it as I got a receipt for something that HAS NOT EVEN BEEN BOUGHT ! (It's funny how apple try to charge me twice for something when I work nightshift and my phones switched off!)
    and all that happened was it came up saying "too many HTTP redirects" .
    And it won't let me report it ! X

    Go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report your issue to the iTunes Store.
    Regards.

  • Hey how are you guys listen i have an iphone 4s the one i use with the H20 CARRIEr and i trying to enable the option call forwarding and when i type tho number i go back and i notice to the call forwarding it turning off as soon i back to the main menu ?

    hey how are you guys listen i have an iphone 4s the one i use with the H20 CARRIEr and i trying to enable the option call forwarding and when i type tho number i go back and i notice to the call forwarding it turning off as soon i back to the main menu ?

    There are a lot of posts in the forums today with people having problems with iMessage.   There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
    I would just wait it out - I'm sure it will be sorted out soon.

  • TS3704 How are you supposed to fix "The feature you are trying to use is on a network resource that is unavailable" alert appears when you remove Apple software in Windows if it doesn't work on Windows 8 or 8.1???

    How are you supposed to fix "The feature you are trying to use is on a network resource that is unavailable" alert appears when you remove Apple software in Windows if it doesn't work on Windows 8 or 8.1???

    See Troubleshooting issues with iTunes for Windows updates. You may have to uninstall what you can, reboot and delete the named folders, then reinstall.
    tt2

  • If you've upgraded to the Rev. 1 router how are you liking it?

    If you've upgraded to the Rev. 1 router how are you liking it over the old one that you had? Wired speeds aside are you getting more or less wireless speeds or not much difference? This of course applies if your wireless cards can handle the higher speeds.
    Range any better?
    Looking for feedback as I'm still deciding if I want to upgrade my Westell 7100 to the Rev. 1 because I'd have to upgrade my pc's network card as well.

    TNS_2 wrote:
    I assume you mean REV I (letter i) .  Speed is better range is about the same.
    I that case then cheaper and more likely better to just purchase your own router/wap and and it to the internal network.
    I you don't have tv as part of your package then could request to change to ethernet connection from ont and just replace the westell with your own router.

  • How are you checking quality in the upgrade process?

    When upgrading your EBS, how are you managing quality?
    Are you using solutions such as Quality Center and Quick Test Pro (from Mercury)? Are you using other tools?
    Which test sets are you using to ensure that the upgrade had completed successfully?

    Hi,
    I am not very good at testing and nor I have used any testing tools.
    But I think there are various post upgrade task which measures the quality of upgrade.
    In my view upgrade quality can be decided on two factors
    1.) Performance of new instance
    2.) Is there any issue with Data ( Check for all tests and reports)
    Pravin

  • How do you hold the Magic Mouse?

    I've had my Magic Mouse for about a month now and the one thing that's really got me on the verge of swapping it out is how I inadvertently move the canvas when I'm working with Photoshop, Illustrator, etc.  With standard mice you don't really have to care about the state of your index finger  after you click or how it may slightly touch the surface as you move the mouse around, but with the MM it's something to be conscious of.  When I stop to inspect the mechanics of how I use a mouse, it's amazing how often my index finger inadvertently bounces back and forth from the surface.  When I'm lifting up, setting back down, considering a click, scrolling, etc.  I'm gonna try to consciously keep my index finger down when I'm moving the mouse around in hopes that it'll stop this unwanted result.
    So how do you hold the Magic Mouse?  Is your index finger always down when you move it around?

    Good question. Seems i use the middle finger for everything except for when I need to swap desktops or do other stuff with mission control.

  • When apple no longer includes an optical drive how are you going to burn an itunes playlist

    when apple no longer includes an optical drive how are you going to burn an itunes playlist

    Well, I don't want to buy an optical drive if I buy a new Mac without one. However, iTunes will not allow "burning" a playlist to anything except a real optical drive.
    Now, I am not running Mountain Lion so I don't know if iTunes for Mountain Lion allows it or not - could someone please let me know if it is possible.
    For me, on Snow Leopard, I cannot find a way to burn, create, duplicate - whatever you want to call it - a playlist to a virtual drive, a USB drive - nothing but a physical drive.
    It just makes me wonder if iTunes provides (will provide) an alternative when there is no physical drive included.

  • Hi how are you i want to replace my iphone 4 with a new one. But i am in Darwin,there is no any apple stores. So where can i send my phone for replacement and how much for that?

    Hi how are you i want to replace my iphone 4 with a new one. But i am in Darwin,there is no any apple stores. So where can i send my phone for replacement and how much for that?

    Warranty and Support are only valid in the country of origin.  You will need to take the device to whatever country it originally came from.
    Apple will not accept shipments from outside the country nor will they return it to an address outside the country.

  • How are you handling keyword sets?

    After spending a little time keywording tonight, I like both Stamping and the "Assign this keyword to selected photo" options. Both are faster and easier than I anticipated. :-)
    The one speed bump has been keyword set creation. It appears to limit each set to nine keywords. Is that right? If so, I guess you could divide long sets into several nine-word subsets. But if you want them in alphabetical order, what happens when you add a new keyword to the set? Wouldn't you need to shuffle everything that follows?
    My temporary solution has been to create sets in the left Keyword Tags panel using "child of" nesting. This keeps that panel -- which otherwise sorts alphabetically without regard to category -- better organized and shorter. So far, I am keywording entirely from that side.
    Does this make sense? If you need long sets or deep nesting in your sets, how are you approaching keywording? BTW, the more I use it, the better I like LR.

    Alexander, what I'm asking about is how people handle long sets. If a keyword does not fall into the natural short-list category described by Mike, that doesn't mean you only use it "occasionally."
    Suppose you regularly photograph species -- flowers, birds, animals -- or football teams with 85 players on a side. You don't want to type every name or drag and drop, do you? As Steve Jobs said of using a stylus: Yuck. Or Ick. Or Blech. Or whatever he said. :-)
    The best solution I've found is to nest the lists in the left panel to shorten the panel, and then select images, twirl down the nested list to the desired keyword, and cmd-click to "Assign this keyword to selected photos." But that adds a step to the (IMHO) faster, easier system in Bridge.
    Just asking if others have found a quicker way.

  • How are you supposed to play a photo cd on a macbook pro?

    how are you supposed to play a photo cd on a macbook pro? when i put it in my drive, it says something like disk type not supported when i open up the dvd player. please tell me if theres some kind of software i have to download..please and thank you

    when you insert the disk it should be in the side bar of finder. double clickt he disk and you should have some sort of file in it. I'm not sure what softwware was used to create the slideshow but if it's a movie you'll have to figure out what type of media it is. I think VLC media player will be your best bet to play this CD/dvd though.

  • How are you guys powering your laptops in your cars ???

    Hi guys,
      Although I have been using computers since the first pc appeared, I only recently decided to get a laptop.  I got a Lenovo B560 and have been absolutely delighted with it. 
     However, I am perplexed at the fact that there does not seem to be any easy options for using the laptop in the car on long trips etc ?  I do not see any type of 12 volt adapter listed in the accessories ??  A google search shows a few "generic" brand power converters but I have always been leary of using anything but oem type equipment.
     Anyway, how are you guys powering your machines while mobile ??
    Thanks,
    Bill

    http://support.lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=MIGR-72900
    Your tip size is 2.5mm x 5.5mm,  19volts, and your current adapter is 90watts, right?
    Your tip size is the same as what is in the y450, y460, y550p, y550, y560, and the y730.
    The y730 is listed under the adapter listed above as taking the 4R 4319 tip, which is the same size as yours.
    The tip, Pt. # 46 4319 is listed as an optional tip for the ultraslim adapter, Pt. #4IN8460, that tip has to be ordered separately from the adapter, it doesn't come with it.
    Scroll to the bottom of the link for the adapter and you'll see the listing for the 19 volt tip, pt. #4R 4319. 
    All this is assuming that you have integrated graphics. 
    Dave
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Hello gentlemen how are you. All your base are belong to us ????

    My X server just shut down leaving me with a black screen full of messages, mostly relating to vlc.
    In the middle of all this was the above message.
    Do we have a developer with a sense of humour or is this something I should be worried about?
    I never run the system as root although I usually leave a root terminal open.
    Bizarre.

    This is ringing many, many bells with openbox.
    *scratches head*
    *greps openbox source*
    -> grep -r "your base are" *
    Binary file openbox/.libs/openbox matches
    openbox/mainloop.c: fprintf(stderr, "How are you gentlemen? All your base are"
    Binary file openbox/openbox_openbox-mainloop.o matches
    ->
    Hm, maybe someone decided to get all funny with their error messages like the OB devs did... or maybe it was the other way around.
    The most likely cause is that this message is a SIGSEGV (segmentation fault) trap - a message that is printed to std{out|err} when the app crashes, since OB prints the AYB when it's crashed too.
    You can actually segfault apps manually with `kill -SIGSEGV <PID>' or killall -SIGSEGV <processname>'
    -dav7
    Last edited by dav7 (2008-05-13 02:08:17)

  • How are you supposed to put on and take off music on the new version of iTunes?

    How are you supposed to put on and take off music on the new version of iTunes?

    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar and Control+B to show the Menu bar
    To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing and follow the instructions.

Maybe you are looking for

  • How to change icloud email? It wasn't me who made it. So every time I used my Apple ID is linked to that email?

    How to change icloud email? It wasn't me who made it. So every time I used my Apple ID is linked to that email?

  • Thunderbird: clickable links & file associations?

    Hi, I have Arch installed with the XFCE desktop environment, plus a handful of apps. I'm using Thunderbird for email and Firefox for web browsing. (OK, not very original, I admit ) 1) Firefox and Thunderbird are set as default apps for browsing and m

  • Tomcat 4.0 setup with Apache 1.3

    I'm trying to set up Tomcat 4.0 and Apache 1.3 to work together. I want Apache to serve html content and forward all requests for jsp pages and servlets to Tomcat. I was wondering once it's set up correctly, do all of the jsp files have to be hosted

  • Sorting multiple discs

    I just shot a wedding with over 3000 photos. Is there some way to load all the discs into photoshop by time stamp. There were 3 photographers, so to make it easier it would be nice if I could put them all in and have them organized by the time they w

  • MSI P43-C51 hours of anguish, distress and burnt money

    Hi there, I got a P43-C51 motherboard, and I wanted to make those 16GB of DDR3 working... but.. I have an Intel E5200 Wolfdale cpu, and wanted to have 16GB of memory in order to make smoother my programming stuff and other actions... So, I've receive