How Are Your Controllers Setup for BYOD/Guest and OEA

I am in the process of building a new wireless network. The network will include BYOD/Guest and OEA for teleworkers using ICE and MobileIron for MDM. In the past I have setup an anchor controller for guest, but for this design I have a cost constraint that prevents me from adding the anchor controller. I know the Cisco SE’s push to include an anchor controller in the DMZ for this design, but I wanted an unbiased opinion from folks who may have a similar design and how your controllers are setup. For this design can I deploy a BYOD/Guest and OEA network without a DMZ controller?
Thanks in advance.
Bret

Hi Bret,
You can use WLC with Cisco ISE.
Here is the full deployment guide:
http://www.cisco.com/image/gif/paws/113476/wireless-byod-ise-00.pdf
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bba10d.shtml
http://www.cisco.com/en/US/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/BYOD_ISE.html
Hope it helps.
Regards
Dont forget to rate helpful posts

Similar Messages

Which are your favorite plugins for lightroom?

hi
just for curiosity
which are your favorite plugins for lightroom?
thanks

That's a very broad net you're casting.
I mean Flickr is flickr users favorite plugin, and those with Nik Collection may be fond of their Nik plugins...
Which plugin(s) you like / use really depends on the person and workflow.
I mean, I'm particularly fond of the plugins I've written, but that's because I understand how they work, they do what I want, and if ever I encounter a bug I fix it. But some people are not so fond of my plugins...
I have written over a 100 plugins, and use about 10% of them regularly, and about half of them not at all (the other 40% on an occasional basis).
In other words, plugins are a means to an end. If you have no desire for that end, you'll have no desire for the plugin that accomplishes it.
For example, TreeSyncPublisher is indispensible if you want to maintain an export tree external to Lightroom, but otherwise it may be useless. YMMV...
Perhaps a better question is:
"What are some good sources for plugins so I could peruse and find those that may help me get my job(s) done?"
Partial Answer:
* Rob Cole
* John Ellis
* Jeffrey Friedl
* John Beardsworth
(and be sure to visit the plugin exchange)
There are a lot of other great sources not mentioned here, and my apology in advance if I neglected you - nuthin' personal I assure you...
Sorry - I realize this wasn't exactly the answer you were looking for. I could give you a list of plugins I use most, but I fear it would not be of much value to you, since you probably would use a totally different cross section. Feel free to contact me outside the forum with questions about specific plugins.
Rob

What are the versions required for JBOSS,JDK and ORACLE to setup the ATG 10.2.

Hi Folks,
Could you please share, What are the versions required for JBOSS, JDK and ORACLE to setup the ATG 10.2.
Thank you.

In case you don't have access to MOS :
JBOSS : 5.1.2 EAP
JDK : 1.6.0_38
ORACLE :
Oracle Exadata5
Oracle 10gR2 (10.2.0.3)
Oracle 10gR2 RAC (10.2.0.3)
Oracle 11gR2 (11.2.0.2.0)
Oracle 11gR2 RAC (11.2.0.2.0)

Driver Setup for PXI 2569 and PXI 2529 in Switch executive

Hi,
What sould be tha "Driver Setup" for PXI 2569 and PXI 2529 in Switch executive under 'Driver Session"
Regards!!!
Vineet Shukla

Hi Vineet,
You do not need to insert anything under Driver Setup. Anytime you are using NI switches, you can simply click Configure NI Switches when creating a NI Switch Executive Virtual Device to configure the topology settings of those switches.
Just so you know, you can insert information under Driver Setup, and then you wouldn't have to use the Configure NI Switches wizard. More detail on what to insert under Driver Setup can be found in the following KnowledgeBase:
How Do I Create a Virtual Switch and Use it in my Application?
http://digital.ni.com/public.nsf/websearch/A1F0D6A3357E14B386256E4B0071FDA2?OpenDocument
In short, you would type "Topology:" followed by the topology name such as "2569/100-SPST" or "2529/2-Wire 4x32 Matrix".
Let me know if you have further questions or if this does not resolve your issue!
Chad Erickson
Switch Product Support Engineer
NI - USA

Hello! My name is Vadim. I'm from Russia. I'd like to buy two iPhones 5, 64 GB: for my wife and myself. But I have a question to you. Will it work in Russia? How much will it cost for me? And how much will delivery cost to Russia? Thank you very much.

Dear Sir or Madame,
My name is Vadim. I'm from Russia. I'd like to buy two iPhones 5, 64 GB online, from your official website Apple: for my wife and myself. But I've a question to you. Will it (iPhone 5, 64 GB) work in Russia? How much will they cost for me? And how much will the delivery from America to Russia cost?
Yours sincerely,
Vadim Fedotov.

iPhone 5 is not available unlocked in US and
Apple Store online does not ship outside the Country it operates
You are best served waiting for the iPhone 5 to be announced in Russia
through your Apple Approved carriers

Document Types Setup for Expense Approval and Payable Invoice

Hi,
Can anyone please suggest Document Types Setup for 'Expense Approval' and 'Invoice Approval' and its tables related to the same. Table storing its document_type_code and wf_approval_itemtype as we have for PO_DOCUMENT_TYPES_ALL table for Purchase Order.
Thank You.
Regards,
Meghana

Hi
It could be because of main memory problem... so Restrict your selections and do the statistical setup
by the way how many comp codes you have? restrict with comp codes or doc ranges
Thanks,

How do I disable transparency for the menubar and addressbar in firefox?

How do I disable transparency for the menubar and addressbar in firefox? (This does not mean disable windows aero or transparency in windows 7. A workaround has been posted. Stop spamming threads with disable transparency and aero everytime someone asks about this.)
It is difficult to read.
Edit:
Is there a setting to tone down the Aero usage of the in Firefox 5 so it looks more like Firefox 3.6. Is there a way to do this in the preferences or inside about:config?
I know what Aero is and how to turn it off.
The 2nd reply has images attached show why it is difficult to read. An light spot on a desktop background or an icon can make it very difficult to read. This is the #1 reason why I keep going back to 3.6.

If you are up to tweaking some CSS code in a style see
"Color Toolbar(s) to identify profile (DM*)" -- in http://userstyles.org/styles/9514, and you must read all of the description material understand what has to be done.
It is a style, and playing with the code is what styles are about. You will have to copy the section of code in the description to the bottom of the style for it to be complete to remove additional Aero effects, and choose two or three colors for the toolbars.

HOW TO CREATE SEVERAL folder for the generation and READING FILE

HOW TO CREATE SEVERAL folder for the generation and READING FILE WITH THE COMMAND utl_File.
please give an example to create 3 folders or directories ...
I appreciate your attention ...
Reynel Martinez Salazar

I hope this link help you.
[http://www.adp-gmbh.ch/ora/sql/create_directory.html]
create or replace directory exp_dir as '/tmp';
grant read, write on directory exp_dir to eygle;
SQL> create or replace directory UTL_FILE_DIR as '/opt/oracle/utl_file';
Directory created.
SQL> declare
2    fhandle utl_file.file_type;
3 begin
4    fhandle := utl_file.fopen('UTL_FILE_DIR', 'example.txt', 'w');
5    utl_file.put_line(fhandle , 'eygle test write one');
6    utl_file.put_line(fhandle , 'eygle test write two');
7    utl_file.fclose(fhandle);
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> !
[oracle@jumper 9.2.0]$ more /opt/oracle/utl_file/example.txt
eygle test write one
eygle test write two
[oracle@jumper 9.2.0]$
SQL> declare
2    fhandle   utl_file.file_type;
3    fp_buffer varchar2(4000);
4 begin
5    fhandle := utl_file.fopen ('UTL_FILE_DIR','example.txt', 'R');
6
7    utl_file.get_line (fhandle , fp_buffer );
8    dbms_output.put_line(fp_buffer );
9    utl_file.get_line (fhandle , fp_buffer );
10    dbms_output.put_line(fp_buffer );
11    utl_file.fclose(fhandle);
12 end;
13 /
eygle test write one
eygle test write two
PL/SQL procedure successfully completed.
SQL> select * from dba_directories;
OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdump
SYS                            EXP_DIR                        /opt/oracle/utl_file
SQL> drop directory exp_dir;
Directory dropped
SQL> select * from dba_directories;
OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdumpRegards salim.
Edited by: Salim Chelabi on Apr 4, 2009 4:33 PM

How dome change my password for my computer and my username apparently it changed because i was moving things from my old mac

How dome change my password for my computer and my username apparently it changed because i was moving things from my old mac

If your forgot the administrative PW for the computer reset the PW
OS X: Changing or resetting an account password
OS X Lion>: How to Easily Reset the Administrator Password

What are shortest file names for outlook express and PSE11 to import photos pls

what are shortest file names for outlook express and PSE11 to import photos pls

Hi, Troubled. The size of the file name is pretty much irrelevant here to PSE, but to answer your question directly, you will be able to import a file that has only a single character as its file name (plus the file name needs to have the required extension, such as .jpg)

HT1727 How do you grant permission for home sharing and authorizing? My mac did home share, but now says, "The required directory was not found or has a permissions error", when I try to authorize.

How do you grant permission for home sharing and authorizing? My mac did home share, but now says, "The required directory was not found or has a permissions error", when I try to authorize.

OK, I just got off of the phone with Apple and still no joy. They had me try a few things that did not work, then told me to Archive and Install, which did not either. Anyway, thanks for the additional help very note worthy, but still no joy. Also an email to iTunes Support took me here
http://docs.info.apple.com/article.html?artnum=93061
I have a Users/Shared folder but since the files we are talking about are invisible, I can see how it is structured.
And by the way I tried this one
http://discussions.apple.com/message.jspa?messageID=3577004#3577004
and it did not work. However, when I install a fresh copy of Tiger on the external it did authorize the computer and was able to play the downloads. But coping the invisible file to my boot drive was not successful. But , like I said the music did play when I started up from the external. So I guess that may be my only solution, unless someone can tell what the correct directory is and where it for iTunes downloads.

HT201304 How do I prevent paying for an app and what is an in app restriction

How do I prevent paying for an app and what is an in app restriction

You can't prevent paying for an app if you buy one. You can, however, turn off the ability to install apps in the Restrictions settings (Settings/General) which blocks the App Store app on the iPhone. You can also block making purchases of extra features or capabilities from within an app, which is referred to as an "in-app purchase", in the same Restrictions.
Regard.

How to Upload the Materials for one Plant and then copy the same to all oth

Hi All,
I am using Material Types NonStock, Service, Spare Parts and Trading.
How to Upload the Materials for one Plant and then copy the same to all other plants.
can anybody give response for this requirement.
Regards...
<b></b>

Hi,
Using MM01 Only we can upload Plant Details.
If you want to extend to other plant also, Use MM01 and select Plant view and give new plant details.
If you want to copy from one plant to another plant after selecting Plant view , next screen you can select From Plant and To Plant Details.
Reward Points If it helps you.
Regards,
Murali K

What are the config steps for contract hierarchies and vendor hierarchies?

Hi friends
what are the config steps for contract hierarchies and vendor hierarchies?
Regards
Raj Kumar

Contract hierarchies
A function that enables users authorized to create a purchasing contract to define relationships between super- and subordinate contracts.
A contract hierarchy consists of one or multiple contracts and is subject to the following rules:
The top node of the hierarchy cannot have a superordinate contract
Every contract except for the top node has exactly one superordinate contract
Every contract can have none, one, or multiple subordinate contract(s)
A contract can be part of no hierarchy or exactly one hierarchy
Note:Contract hierarchies are only available for purchasing contracts. They are not available for global outline agreements.
You can activate this from SRM Server> Cross application settings>Activate Hierarchies for Product Categories, Vendors, and Contracts.
Note:
These hierarchy functions should not be reset once they have been activated.
Similiarly you can do this for Vendor Hirerachies.
Please visit link for more details: http://help.sap.com/saphelp_srm50/helpdata/en/43/2022b83fbc2be8e10000000a11466f/content.htm
Thanks

How to create customer exit for characteristic variables and for text vars.

hi friends,
can anybody tell me how to create customer exit for characteristic variables and for text variables in bw ides system.
thanks,
sree

Hi,
Please have a look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
Krzys

How Are Your Controllers Setup for BYOD/Guest and OEA

Similar Messages

Maybe you are looking for