How automatically saving a copy when saving a file?

Hi,
For my pictures (RAW and PSD) I use a separate external disk, our Timecapsule would be full in a year. My work flow in copying is normally no problem. But of course now my iMac drive is 'broken' I find a few PSD-files not be copied to the external drive. I wondered, is there a simple way to automatically save a copy when saving a file (and replace an earlier version of the copy)?
Murk

Thanks. FWIW I'm very keen on improving tethering and lobbied Adobe endlessly until they added the overlay for shooting into layouts because it was a major reason why some of my clients were unable to switch to Lightroom from PhaseOne. But we have to be realistic and remember that tethering just isn't a key market for Adobe as it is for PhaseOne, so progress is painfully slow. For example, where is live view or setting exposure which are in PhaseOne? I'd be amazed if we get those features for a few versions, and that's why I point serious tethered shooters to other solutions. And realistically, assuming your understanding of the SDK is correct you shouldn't expect a change until the next full version of Lightroom.  Good if it happens, but I wouldn't bet on it.

Similar Messages

  • How to retain font-size when saving filled in form (pdf)

    Hi,
    I have a pdf form from an organization and when I fill in the (text)boxes, the more text I put in there, the font-size will adjust to fit everything in. However, when I save the pdf file and view it in a different pdf reader the font-size is too big and half of the text is not visible.
    Also, the form contains some checkboxes/radiobuttons. When filling in the form they work just fine, but when saved and viewed both the yes and no are checked, even though I only checked one of them.
    Anyone have any idea how I could fix this?
    Thank you in advance
    (using: Acrobat XI 11.0.0)

    Ow.. I don't know the solution yet, but maybe something went wrong earlier with someone else who filled it in partially. I found the original on the internet and that seems to work so far.
    http://www.state.gov/documents/organization/84240.pdf

  • Images Automatically Reduced in Resolution When Saved as PDF

    I created images in Photoshop and saved them all at 300 ppi in JPEGs. I inserted the JPEG images into an MS Word  2007 document. I then saved the document as an Acrobat file. In the resulting PDF file, all the images are at about 150 ppi. I have no idea why. Can someone tell me how to produce a pdf in which the images are at the original 300 ppi?
    Thank you. GeePapa

    Hi Eugene
    I am using visFixedFormatPDF, visDocExIntentPrint, and visPrintAll, but there is no improvement in the resolution of the PDF.
    The Type.Missing value can only be used for the last parameter. The other parameters require either bool or int, so I get compile errors if I try to use Type.Missing.
    I also notice the reduction of resolution in Visio 2013 only applies to bitmap images copied into the Visio file. Lines and shapes drawn in Visio still looks fine. I am getting this problem even if I simply select the Save As menu option and select PDF,
    so this problem could be independent of office.interop.
    Is there something I can do to avoid the degradation of resolution of bitmaps in Visio 2013? Everything is fine in Visio 2010.

  • How to keep crop marks when saving as PDF

    In Illustrator CS5, I have some artwork which has 3mm bleeds all around.  The printing shop requires me to provide the artwork with the bleed and also the crop marks showing as well in PDF format.  But whenever I save as PDF, Illustrator doesn't show the crop marks I have made.  I've tried selecting print trim marks in the save as dialog boxes, but this only puts marks right at the edges, after the bleed areas, making the trimming marks incorrectly placed.  I'm pulling my hair out!!  Please can someone tell me what I'm doing wrong.
    Thanks in advance!!
    Joe

    That didn't work for me.  In fact, the only way I could get it correctly was to enlarge my artwork to extend over the artboard and then when saving as PDF to tick the printer trim marks boxes.  Not as easy or straightforward as with a crop mark, but it seems to be working now.
    Thanks anyway for all your input!

  • Saved Plug-ins when saved go . . .

    When I create a workflow and save it as an application, it works great. When saved as a plug-in for the Finder, nothing. It does not show up in the pop up contextual menu and can not find it anywhere. I have done this before and it worked great. But nothing now.
    The only difference is that I am now in a newer "virgin" install of 10.4.8 and all kinds of strange things are happening even though I have not installed any third party applications. And that the OS is doing things on its own that I have never ever seen happen. It's almost like the OS is possessed or sabotaged.
    Any assistance will be greatly appreciated.
    Thank you . . .
    . . . mgm

    Yeh, I'm having all kinds of keychain things, and printer icons changing on their own, and all kinds of really strange stuff. And this is a brand new install. I think somethings up on the Apple side?
    One thing though is that all the previous plug-ins are working (drug over from the old install) in the new OS install. The new ones won't work anywhere.
    Now I have been moving into this new install very slowly and carefully. And just might have to do it again, but stop at 10.4.4 this time. That was my most up to date that was the least problematic install.
    Called Apple. Now I know what it looks like when someone shrugs their shoulders over the phone.
    In searching the forums, I have found others with the same problems, no results nor fixes, and the threads were locked with very little action.
    Hmmmm.
    Thank you for your time and attention.
    Take Care . . . .
    . . . fb

  • How to create a copy of MS-Word file using IO Streams

    Hi,
    I have a MS-Word document which has to be copied as another word file with some different name. But this has to be done using Java API.
    Can any one help me in this regard.
    ..Raj

    Hi,
    I am also using the same package - "com.lowaige.text". But this will be useful to design a new PDF. There is another tool provided by glance.com which is called "Preptool". This tool allows to parse the data into PDF Form Fields. I am struck there. If I create a new PDF with Form Fields, my work is done. But if I copy the existing PDF (with formfields) using Core Java API or using PrepTool API, I am unable to parse the data. I donno the reason why this is happening. So I thought is there any way to copy the file using Java API.
    Thanks & Regards,
    ..Raj

  • How to keep Korean fonts when converting .pages file to .epub file

    Hi, I am also asking about embedding Korean fonts other than English when converting .pages file to .epub file.
    I really like to use application for Mac in order to make certain file format for e-books though there seems to be some problem that should be improved.
    Please answer to my question and help me to find the best way to make .epub file with Mac.
    37Fides

    You should have no problem keeping your text in Korean when you convert to .epub from .pages.  Are  you saying that the Korean is converted to something else?   Please provide more details about what is not working the way you want.
    Pages can't embed fonts, you would have to use another app.  But there is no need to embed fonts to create Korean books.

  • How to set jpeg resolution when saving pdf file as jpeg

    I'm running Acrobat using interprocess api, I can invoke a script to save a pdf file as JPEG, but I need to be able to set the resolution of the saved jpeg file.
    Any clues as to how I can do that ?
    Peter

    Hi
    I am running a stand-alone version of Framemaket 10.I try to convert a documentation with a lot of screenshots in it. Regardless of the settings on the Reference pages of the first document of the book, Framemaker converts all graphic files to *.gif, and these are downsized so much that they become illegible. I would like to have them converted to JPG, with little resolution loss, so they are still readable.
    I think Robohelp is too expensive…
    Best regards
    REIDEN TECHNIK AG
    Alexander Keller
    Tech Writer

  • How to keep 300dpi resolution when saving a jpeg from illustrator

    I have an illustrator cs4 file set up in 300 dpi. when I save it into a jpeg, it automatically downsizes it to 72 dpi and the quality of the image is really bad. how do i keep a 300 dpi resolution when I save my document to a jpeg file from illustrator?

    Use file >> export >>jpeg>resolution >> custom 300
    Sounds like you were using save for web.

  • How do I remove JavaScript when saving?

    Hello,
    I have several templates I've made for my co-workers that used Document Level JS.  I want this JS to disappear when my co-workers save the PDF as something else.
    For example,  I'm using the following syntax:
    getField("Date").value = util.printd("mm/dd/yyyy", new Date());
    This will update the date each time it is opened.  However, I only want this in the template.  When template.pdf is re-saved as workdocument.pdf, I want that JS gone, so the date no longer continues to update.  I'm sure this is something simple I'm missing but my Google-Fu is failing me.
    Any help?
    Thanks!

    Thank you for the reply.
    They are all using Pro as well.  I will change the script to only update if it is empty.  Good call!

  • How can I reduce clicking when saving images?

    I often open a set of JPEG files and edit them. Unfortunately, saving them after editing is far from streamlined. I have to click three times (save, overwrite, jpeg settings) if I want to save a single file, with wait times in between. Ideally, I would like to save a series of files with just one action, using the same settings for all. Can this be accomplished somehow? Or could I at least configure a default setting for JPEG quality, so it does not need to be asked each time?
    Thanks!
    Frans

    Hi crease-up,
    I'm facing the same problem with my website. I read iWeb was turning .jpg files into .png files when pictures are resized within the iWeb application. The fix is to resize and apply effects oustside the app and then place them on your pages. (see details under http://www.rowan-cottage.co.uk/Site/iWeb_FAQ.html, scroll down to point 7).
    No way near to be a picture software specialist, I use an easy free resizing software called Resize 'Em All (http://www.eagle-of-liberty.com/resizeemall/index_en.php) to resize my pics.
    Another free cool software is PNGCrusher (http://www.amake.us/software/pngcrusher/), check it out.
    Finally, Picturesque (http://www.acqualia.com/picturesque/) is doing both resizing and effect applying but is a shareware.
    Trust this helps, let me know.
    Vonz.

  • How to create approval procedure when saved as draft?

    How can I create an approval procedure where the document is saved as draft?
    Specifically, returns saved as draft where document total is greater than $3,000 need approval.
    Thanks

    Hi,
         Approval Procedures cant be used in draft mode. Approval Procedure itself acts as document in draft. It wont do inventory postings & financial postings as well. Just create approval procedure with your requirement & try.
    I am looking forward your reply,
    Regards,
    Maheswaran.

  • How to remedy sharing violations when saving an AS3 file.

    Since installing Flash CS4 (I previously had CS3) I've had a rather annoying problem that is really cutting into my productivity.
    If I 'Test Movie' or 'Debug Movie' and then switch back to my actionscripting window and make changes and then try to save without closing the movie, I receive a sharing violation notification.   I then have to close the movie and wait for at least 3 seconds after doing so before a save will succeed without giving a sharing violation.
    I know that doesn't sound like much, but when you do it hundreds of times in a day it really eats up time and interrupts workflow.
    Anybody know how to remedy this?  I've tried creating fresh AS3 files in fresh locations but to no avail.  I can find no similar references to it using google.
    Thanks in advance.   Here's the dialog:

    As there's not been a single response, is there any way to pass my question on to support proper, and get the answer added to the knowlege base?  This is rather important I think.

  • How to stop iPhoto launch when saving pictures in Safari?

    How do I stop iPhoto from automatically launching or coming to the front of the screen every time I want to save a picture I find using Safari?  It's incredibly annoying that each time I click to save one, iPhoto just jumps right into my face.
    Thanks!

    Hi Neil -
    Thanks for getting back so quickly.  Unfortunately this didn't do the trick. 
    Perhaps I should have been more specific: I'm "adding the photos" to my library.  Each time I do this iPhoto launches.
    Thanks!
    Lou

  • How can I increase resolution when saving file as PDF?

    I am sending some illustrated files to a professional printing press that only accepts PDFs, however they say the resolution is too low and should be 300dpi. How can I increase resolution? Only option I could find was to try to create a new filter in Color Sync by duplicating PDFX3 filter and editing it to the desired resolution, however I couldn't get new filter to save my resolution inputs. Any help is appreciated!

    You really need something like Acrobat which will install a "Save as Adobe PDF" under the PDF menu. You can select press quaility," "high quality print," etc., and get a true high res PDF.
    If you'd like to just give it a shot, try downloading one of the OS X CS6 suites that include Adobe Acrobat Pro for a free 30-day trial. I've never used SketchBook Pro, but Acrobat may help you out.
    Clinton

Maybe you are looking for

  • Where did my cursor go when I was surfing the web?

    My cursor disappeared when I was surfing two different sites today. My only solution was to power off and reboot. [My touchpad is not turned off.] Is this a problem that has an easier solution or is this a technical problem that needs fixing by HP/Co

  • How to access Adapter Specific Message Attribute in my  own adapter module

    Hi, I'm developing a mail adapter customer module. Now I have a requirement about getting the CC information from mail. Even if I checked the option of "use mail package" when configing sender Mail Adapter, I still can not get CC information in my mo

  • Service Entry: No message Output

    Hi, I created some new purchasing groups and it run well until the release strategy of PO. But after I created service entry and accepted it, it said that 'no message output', and I can't print the entry sheet through ML83 (it said 'no suitable purch

  • The inserted SD card will not allow me to upload or delete from it. Also with other SD cards

    I have placed multiple SD cards in to the SD slot of my iMac and all are unlocked (enabled to be edited). Every single one does not allow me to add documents or delete documents from them. I am starting to think this is an iMac issue. Please help

  • Read Error logs after running the background jobs

    Hi, How to read the error logs after running the background jobs. In our scenarion we are running the COHV transaction to release the production orders in background. But we are not finding the error logs after background job. We would like to read t