How avoid of dialog in MS Word 97 during Save As HTML with JACOB...

How to avoid of dialog "Microsoft HTML Conversion" in MS Word 97 during Save As HTML with JACOB. Dialog has this type of content: This document contains characters that are not in the current language encoding. To preserve them, choose cancel and select the appropriate language encoding. For multilingual documents, use UTF-8.

It's not a JACOB issue, probably you have to direct your question to some Microsoft newsgroup (about Microsoft Word 97 automation using OLE/COM)

Similar Messages

How do I transfer powerpoint and word documents to my ipad with the new itunes?

how do I transfer powerpoint and word documents to my ipad with the new itunes?

Have a look at the following:
http://itunes.apple.com/sg/app/quickoffice-pro-hd-edit-office/id376212724?mt=8&l s=1
http://itunes.apple.com/sg/app/office2-hd/id364361728?mt=8&ls=1
http://itunes.apple.com/sg/app/documents-to-go-premium-office/id317107309?mt=8&l s=1
http://itunes.apple.com/sg/app/polaris-office/id513188658?mt=8&ls=1

How to restrict Firefox to open word document in browser window with href

How to restrict firefox to open word document from a website link to open in the browser window, instead it should open in native program.
1.I have tried other website, and have clicked on similar links they are opening word document correctly in native program
2. MS word document from one specific site is opening in browser causing junk character in place of word document.
Could you please help on this.

Thanks for your response...
But As i said, I have tried with other website on the same browser, there it is opening word document in native program. Also the above mentioned options have been tried earlier.
I have some questions related to this?
How is this href link is behaving differently opening in browser for mozilla only. Technically, Can we make it open it native program only? If so, then how?

How can I print an A3 word document onto A4 paper with HP Photosmart Plus?

I have an A3 MS Word document I want to print onto A4 paper. i have the HP Photosmart Plus e printer.

Hi Colinp5322,
I'm guessing you are printing from you computer.
Would like you to follow the step below.
Return to the photo you were trying to print when the issue occurred.
Click File , and then click Print . The Print window opens.
Click the button that opens the Properties dialog box. Depending on the software program, the button might be Properties , Options , Printer Setup , Printer , or Preferences .
Click the tab that provides paper type and size settings. The tab might be Features or Paper/Quality .
From the Size is drop-down list, select the paper size that matches your needs.
From the Source is drop-down list, select Tray if it is not already selected.
From the Type is drop-down list, select the paper type that matches the paper in the tray.
Click OK , and then click OK again to print the photo.
Let us know if this helped.
Thanks
Josh.C
Click on the BLUE KUDOS button on the left to say "Thanks"
Although I am an HP employee, I am speaking for myself and not for HP.

How to avoid the dialog box "SAVE, Open, Cancel" When we take a pdf print.

I have an item entry form. User select different items and then submit the order by pressing submit button.
I want that when the user click the submit button he is directet to the print preview page. I have done that and it is running fine but the issue is when user click on the submit button the dialog box appear showing file name and an option to save or open the file. I want to avoid that dialog box and I want that the file is opened directly.
In shot I want that the user goes directly to the open file option instead of giving him the options.
Thx,

Hello Syed,
I thought this is a browser behavior. In Firefox it asks the first time what I want to do.
If I select open and select the checkbox to do that always like that, it's opening directly.
I searched a bit in javascript, use an iframe or specify different targets, the behavior is the same, unless I check the checkbox I get the dialog box. Maybe there's a workaround, but I didn't find that yet.
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://www.apex-evangelists.com/
-- http://www.apexblogs.info/

How to keep embedded PDF's in an MS Word 2010 document during export to PDF with PDFmaker

Hi,
I am preparing in MS Word 2010 a Software Manual with embedded PDF's
When I double click in MS Word on the inserted PDF, Acrobat opens the embedded PDF (these are A0 CAD Drawings).
I want this functionality also after I have converted the MS Word file to a PDF with the PDFMaker add-in (Acrobat X Pro)
Is this possible?
Greetzzz,
Gerben

No. PDF files cannot be embedded within the pages of other PDF files.
What you could do is attach the other files after the PDF has been created, then manually link to those attachments in Acrobat.

How can I use Automator to open and save Word docs with links?

Hi-
I'm having trouble building a Workflow to open and save Word docs with links.
My Workflow so far:
1. Get Finder items
2. Copy Finder items (to new folder)
3. Rename selected items
4. Open selected items (Word docs)
Three problems occur.
The first is a Word 2004 problem -- I can't get the warning "This document has links in it; do you want to open it with/without updating the links" to go away (Unilke the Macro warning toggle capability, there is nothing in the Preferences for Word 2004 that addresses the links warning, as far as I can tell; any insight you can shed on this would be terrific.)
The second problem happens with Automator: if I manually accept the update of the first document's links, Automator opens that document but then halts completely, even though I've instructed it to open multiple documents.
The third problem I have is that there's no Finder action in Automator that allows me to save the document that's now open (as far as I can see).
Any suggestions for how to fix? If I can get this to work, and scheduled in iCal, it will be an unbelievable time saver.
Thanks,
Jeremy
PowerPC G5 Mac OS X (10.4.6)

Hi there Jeremy,
to do this you are going to have to add in some Run AppleScript steps...
These will rely on GUI Scripting. So first you need to activate GUI Scripting.
Now we need to add in a Run AppleScript action to the end of your workflow...
This will replace your current number 4 in the workflow (Open Selected...)
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">on run {input, parameters}
set allItems to every item of input
repeat with currItem in allItems
tell application "TextWrangler"
open currItem
end tell
activate application "TextWrangler"
tell application "System Events"
tell process "TextWrangler"
delay 2
--when the Word document is opened I have told it to press okay !
--I don't know what key you want it to press in the dialog box
keystroke return
delay 2
--save the doc
keystroke "s" using command down
delay 5
--close the doc
keystroke "w" using command down
end tell
end tell
end repeat
return input
end run</pre>
The above script should open each Word Document, press a button in the dialog box then do a save and then close the doc...then loop through the rest of them.
You need to replace the name Text Wrangler with Microsoft Word (or whatever it is called!), I don't have it on my Mac.
You will have to let me know what button needs pressing in the first dialog, if it isn't the 'highlighted ' one then we will have to amend the script...
regards
Ric

How to remove hyperlinks in a word document

how to remove hyperlinks in a word document

Go to your "Insert" drop down menu.
Select "Hyperlink", near or at bottom.
You will get this dialog box:
Look at the lower left corner... see the button "Remove Link"?
Click on it...and hit the "OK" button in the lower right...
Since this was a Word question, and not a Mac Pro question, it would have been better to post it here http://www.msofficeforums.com/word/

How do I add a two word phrase to index

I’m trying to speed up the process of adding Latin names of plants and animals to an index using Indesign CS4. These consist of two word phrases (genus + species) which need to be put into the topic level 1 and topic level 2 boxes of the New Page Reference (Index) dialog. Using Ctrl 7 to invoke the dialog just puts whatever is selected into Topic1 and using Shift+Ctrl+Alt+] adds a ‘proper name’ index entry (Surname, forename) which is no good. When the information has been entered, a simple nested index can be produced, sorted by genus and then species.
I’m used to programming using vb in MS Office but am totally new to javascript and this has taken two days to get this far. The first problem is that if the user only puts an insertion point into the first word (genus) I can’t figure out how to move to the second word (species) in order to save it to a variable.
So I have:
var myTopic1 = "" ; // topic level 1, i.e. genus
var myTopic2 = "" ; // topic level 2, i.e. species
myIP = app.selection[0] ;
myTopic1 = myIP.words[0].contents ;
This works on a insertion point in any word, or if a phrase is highlighted will take the first word.
Is there a simple way of copying the second word after the insertion point to myTopic2? I’ve tried various methods but can’t get anything to work. I thought it would be a simple matter of adding 1 to the index of the containing paragraph or story.
I’ve got round this in a very long-winded way by asking the user to select the whole genus+species string, then working out the position of the dividing space and reconstructing the genus and species character by character:
var myString = "" ; // user-selected string: genus + species
myString = myIP.contents
myStringlen = myIP.contents.length
var xposn = myString.indexOf(" "); // gives posn of the (first) space character within selected string
var yposn = 0 ; // start of the string
myTopic1 = myString.charAt(yposn) ;
while (yposn < (xposn-1))
myTopic1 = myTopic1 + myString.charAt(yposn+1) ;
yposn++ ;
while (xposn < myStringlen)
myTopic2 = myTopic2 + myString.charAt(xposn+1) ;
xposn++ ;
// show results:
alert("Topic1 = " + myTopic1 + ". Topic 2 = " +myTopic2) ;
So at this point I need to figure how to invoke the New Page Reference dialog with Topic1 and Topic 2 filled in? I would like the option of overriding the character format of the page reference ‘Number Style Override’, so would prefer to conclude the script with the dialog left open. Can this be done using script, or do I need a custom dialog? Alternatively it would also be good to just automatically save Topic1 and Topic2 and insert the index marker at the selection point without invoking any dialogs. I’m really struggling to get anywhere with this, can someone please help! Many thanks. Sorry for the long post.

John,
It can be confusing initially, but JavaScript and InDesign's object model will soon make sense. What you want to do can be done with this script:
w1 = app.selection[0].words[0].contents;
w2 = app.selection[0].words[1].contents;
doc = app.activeDocument;
if (doc.indexes.length == 0){
doc.indexes.add();
species = doc.indexes[0].topics.add (w1).topics.add (w2);
species.pageReferences.add (app.selection[0], PageReferenceType.currentPage);
Select genus and species, then run the script.
It's not possible (I don't think) to open the New page Reference dialog. Do you want to apply the number style override to all page references? If that's the case, don't. Apply the character style to the page numbers after the index has been generated, or better, set it in the index paragraph style.
If you want to apply the number style override only to some pages, you can do as follows. Before selecting genus+species, prefix the genus name with e.g. #. That symbol tells the script to add an override. The script will strip the #, create the page reference, and add the override. You need to tell the script somehow which character style to use for the override.
Peter
Edit: Jump beat me to it, and gives you a different method to get your two words. Spoilt for choice!
P.

Navigate in Word's "Save As" dialog box without mouse

I want to create macros (using QuicKeys) that will Save As documents created in Word using keystrokes alone (no mouse action). In OS 10.5x this could be done by going to the top level of folders that could be selected (this part still works in Snow Leopard); pressing the "tab" key three times (until the first item in the list of folders where I could save was selected); then typing the first letter or two of another folder in the list to select it. In Snow Leopard there seems to be no way to do the second action (for which pressing "tab" three times formerly worked)—although pressing "tab" does navigate to several other places in Word's "Save As" dialog box. Am I wrong?

For the benefit of everyone who has been anxiously awaiting a solution to the problem I posed above on May 9 (both of you), I've found the following workarounds for most navigation needs in Word when doing an Open or Save As... command (these work at least in Mac OS 10.6.8):
(1) To go UP the hierarchy of volumes and folders, press Command - [up arrow key].
(2) To go DOWN the hierarchy of volumes and folders (that is, to open a volume or folder that you have selected), press Shift - Return.
Examples of how to use those moves:
After you trigger Word's “Open” or “Save As...” command, press Command - [up arrow key] a few times to get to the root level of the network, drive, or whatever you are working in. (How many times you need to press that combination will depend on how many levels it contains. But if you are making a macro to do this, have it do that key pressing several times—because once you get to the root level of the network, drive, or whatever, pressing that combination more times does nothing.)
Press Tab three times. This normally results in selecting some volume (or folder) at the root level.
To select another volume (or folder) at the root level, type the first character(s) of its name, or press the [up arrow key] or [down arrow key] as appropriate.
To open a particular folder within that volume (or folder), type the first character(s) of its name to select it, and press Shift - Return; repeat as needed until you get where you wanted to go.
If anyone else likes to use macros to reduce effort in this way, and discovers any better ways to do such things, please add to this thread.

Avoid print dialog in smartforms

Folks,
I am trying to avoid print dialog which comes up in smartforms. But my code is not working. Please help.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname                 = gv_form
*   VARIANT                  = ' '
*   DIRECT_CALL              = ' '
IMPORTING
   fm_name                  = fm_name
EXCEPTIONS
   no_form                  = 1
   no_function_module       = 2
   OTHERS                   = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
gv_control-no_dialog = 'X'.
gv_control-preview   = 'X'.
gv_control-no_open   = 'X'.
gv_control-no_close = 'X'.
*gv_control-device    = 'LOCL'.
gv_output-tddest = 'LOCL'.
CALL FUNCTION 'SSF_OPEN'
EXPORTING
*     ARCHIVE_PARAMETERS       =
*     USER_SETTINGS            = 'X'
*     MAIL_SENDER              =
*     MAIL_RECIPIENT           =
*     MAIL_APPL_OBJ            =
    output_options           = gv_output
    control_parameters       = gv_control
*   IMPORTING
*     JOB_OUTPUT_OPTIONS       =
EXCEPTIONS
    formatting_error         = 1
    internal_error           = 2
    send_error               = 3
    user_canceled            = 4
    OTHERS                   = 5.
IF sy-subrc <> 0.
*   error handling
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT gt_distributors INTO gs_distributors.
CALL FUNCTION fm_name
    EXPORTING
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
   control_parameters         = gv_control
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
   output_options             = gv_output
   user_settings              = space
   gv_agmt                    = p_agr
   gv_dist                    = gs_distributors-kunnr
* IMPORTING
*   DOCUMENT_OUTPUT_INFO       =
*   JOB_OUTPUT_INFO            =
*   JOB_OUTPUT_OPTIONS         =
EXCEPTIONS
   formatting_error           = 1
   internal_error             = 2
   send_error                 = 3
   user_canceled              = 4
   OTHERS                     = 5
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDLOOP.
CALL FUNCTION 'SSF_CLOSE'
*   IMPORTING
*     JOB_OUTPUT_INFO        =
EXCEPTIONS
    formatting_error       = 1
    internal_error         = 2
    send_error             = 3
    OTHERS                 = 4.
IF sy-subrc <> 0.
*   error handling
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* analyse internal error table of Smart Forms
CALL FUNCTION 'SSF_READ_ERRORS'
IMPORTING
    errortab = gv_errtab.
IF NOT gv_errtab IS INITIAL.
*   add your handling
ENDIF.
A message is coming at the bottom saying...please main output device in the user master data. How do I maintain?
Message was edited by: Naren Somen

Hello all,
Thanks for the replies. They are really helpful. Actually my code is working fine in one client and in other client it is not working. The reason being user01-spld is empty. My code looks like this:
REPORT zagreement                              .
TYPES: BEGIN OF ty_distributors,
         kunnr TYPE kunnr_v,
       END OF ty_distributors.
DATA: gt_distributors TYPE TABLE OF ty_distributors WITH HEADER LINE.
DATA: fm_name TYPE rs38l_fnam,
      gs_distributors TYPE ty_distributors.
DATA: gv_control TYPE ssfctrlop,
      gv_errtab TYPE tsferror.
DATA: gv_form TYPE tdsfname VALUE 'ZAGREEMENT'.
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME.
PARAMETER: p_agr TYPE knuma_ag.
SELECTION-SCREEN: END OF BLOCK b1.
***distributors
PERFORM get_distributors.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname           = gv_form
IMPORTING
    fm_name            = fm_name
EXCEPTIONS
    no_form            = 1
    no_function_module = 2
    OTHERS             = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
gv_control-no_dialog = 'X'.
gv_control-preview   = 'X'.
gv_control-no_open   = 'X'.
gv_control-no_close = 'X'.
CALL FUNCTION 'SSF_OPEN'
EXPORTING
    control_parameters = gv_control
EXCEPTIONS
    formatting_error   = 1
    internal_error     = 2
    send_error         = 3
    user_canceled      = 4
    OTHERS             = 5.
IF sy-subrc <> 0.
*   error handling
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT gt_distributors INTO gs_distributors.
CALL FUNCTION fm_name
    EXPORTING
      control_parameters = gv_control
      gv_agmt            = p_agr
      gv_dist            = gs_distributors-kunnr
    EXCEPTIONS
      formatting_error   = 1
      internal_error     = 2
      send_error         = 3
      user_canceled      = 4
      OTHERS             = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDLOOP.
CALL FUNCTION 'SSF_CLOSE'
EXCEPTIONS
    formatting_error = 1
    internal_error   = 2
    send_error       = 3
    OTHERS           = 4.
IF sy-subrc <> 0.
*   error handling
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* analyse internal error table of Smart Forms
CALL FUNCTION 'SSF_READ_ERRORS'
IMPORTING
    errortab = gv_errtab.
IF NOT gv_errtab IS INITIAL.
*   add your handling
ENDIF.
*&      Form get_distributors
*       text
* --> p1        text
* <-- p2        text
FORM get_distributors .
***distributors
SELECT kunnr
    FROM a941
    INTO TABLE gt_distributors
   WHERE knuma_ag EQ p_agr.
IF sy-subrc <> 0.
***no distributors found for this agreement
ENDIF.
ENDFORM.                    " get_distributors
Your answers are really helpful and I am awarding points to all of them.
Thanks,

Installation of Dialog Instance (DI) - Error during installation...

Hello gurus,
System: SAP ECC 6.0 SR3 (ABAP+JAVA) -- Central Instance (CI)
Database: MS SQL Server 2008
Operation System: Windows Server 2003 X64
I´m trying to install a Dialog Instance (DI) but during the SAPInst I´m faccing with an error!
First at all I made some things/requirements in this new server like:
- Install J2SDK;
- Set Swap space (20 Gb);
- Install SQL Server 2008 x64.
So, after that, I run SAPInst with the following option: "SAP ERP 6.0 Support Release 3 --> Software Life-Cycle Options --> Application Server --> MS SQL Server --> Dialog Instance"
The error is on the screen "MS SQL Server --> Database Connection Information" when I put in field "Database Instance" the value (in my case I write PTREPRDPRD which are the hostname of CI server and the sap instance PRD), after I typing the button "Next" it shown a message error which say:
"Cannot connect to PTREPRDPRD Error(s) returned: SQL Server does not exist or access denied. SOLUTION: Check that you specified the correct name for the database server, that the server is running and you are authorized to log on to it."
Can you help me how to resolve this problem!??
Kind regards,
Joao Dimas - Portugal

Hello Javed,
Here you have it, sapinst_dev log:
TRACE      2010-07-26 13:21:49.582 [iaxxgenimp.cpp:360]
           CGuiEngineImp::showDialogCalledByJs()
<dialog sid="diMssLoginWINOnly">
<title>MS SQL Server > Database Connection Information</title>
<field enabled="true" highlight="false" sid="iHost">
<caption>Database Instance</caption>
<helpitem id="Databases.MS SQL Server.DatabaseInstance"/>
<value type="string">PTRESAPPRD</value>
</field>
<dialog/>
TRACE      2010-07-26 13:21:49.582 [iaxxgenimp.cpp:1255]
           CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE      2010-07-26 13:21:57.379 [iaxxdlghnd.cpp:96]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE      2010-07-26 13:21:57.379 [iaxxcdialogdoc.cpp:212]
           CDialogDocument::submit()
<dialog sid="diMssLoginWINOnly">
<field enabled="true" highlight="false" sid="iHost">
<caption>Database Instance</caption>
<helpitem id="Databases.MS SQL Server.DatabaseInstance"/>
<value type="string">PTRESAPPRD\PRD</value>
</field>
<dialog/>
TRACE      2010-07-26 13:21:57.395
Call block:MssLoginInfo_ind_ind_ind_ind
    function:MssLoginInfo_ind_ind_ind_ind_DialogPhase_dAskForConnectionValidator_default
is validator: true
TRACE      2010-07-26 13:21:57.395
t_MssLogin.remove(WHERE Key='std')
TRACE      2010-07-26 13:21:57.395
t_MssLogin.insertRow({
Key:std
Host:PTRESAPPRD\PRD
LoginType:WIN
}), inserting
TRACE      2010-07-26 13:21:57.395
MSSTRC: odbc driver is installed.
TRACE      2010-07-26 13:21:57.395
t_MssMessages.remove(WHERE 1=1)
TRACE      2010-07-26 13:22:13.426
Cannot connect to PTRESAPPRD\PRD
SQL Server does not exist or access denied.
TRACE      2010-07-26 13:22:13.457 [iaxxgenimp.cpp:752]
            CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Cannot connect to PTRESAPPRD\PRD<br>Error(s) returned:<br>SQL Server does not exist or access denied.
<br>SOLUTION: Check that you specified the correct name for the database server, that the server is running and you are authorized to log on to it. </body></html>
TRACE      2010-07-26 13:22:13.457 [iaxxgenimp.cpp:1255]
           CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE      2010-07-26 13:22:22.973 [iaxxdlghnd.cpp:204]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE      2010-07-26 13:22:22.973 [iaxxgenimp.cpp:1255]
           CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE      2010-07-26 13:22:42.410 [iaxxdlghnd.cpp:82]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_PREV requested
TRACE      2010-07-26 13:22:42.410 [iaxxgenimp.cpp:368]
           CGuiEngineImp::showDialogCalledByJs()
<dialog sid="diMssLoginWINOnly">
<dialog/>
TRACE      2010-07-26 13:22:42.442
The step dAskForConnection with key |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_getDBInfo|ind|ind|ind|ind|4|0|NW_MSS_DBINFO|ind|ind|ind|ind|3|0|MssLoginInfo|ind|ind|ind|ind|0|0 has been executed successfully.
WARNING    2010-07-26 13:22:13.426
           lib=iamodmssql module=CIaNtMssDmo
Cannot connect to the database server. Errors returned: [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.
[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).
Call your SAP Support.
INFO       2010-07-26 13:22:42.489 [sixxcstepexecute.cpp:781]
Execute step dCheckGivenServer of component |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_getDBInfo|ind|ind|ind|ind|4|0|NW_MSS_DBINFO|ind|ind|ind|ind|3|0|MssLoginInfo|ind|ind|ind|ind|0|0

How avoid the hyphen in filename when saving ?

How avoid the hyphen that illustrator puts between 2 words in the filename when saving your existing file.
E.g.: open file "Donald Duck.ai", edit it and save it again. Illustrator puts a hyphen between : "Donald-Duck.ai".
Is it possible to avoid this ?

I tried a lot of settings. Set all on "none" in Settings > Output Settings, and saved that settings.
When saving for Web the second time the same .ai, the hyphen remains away.
But saving another .ai, settings are gone and the "Custom" settings are selected again.
I searched the map "Output Settings", to delete "Custom" so "Default" would be selected, but "Custom" is not in that map.
Otherwise I could copy my saved settings into the "Custom" file.
I found this about my issue : http://okapi.sourceforge.net/Release/Filters/Help/illustrator.htm
See "Issues with Illustrator" :
The JPEG preview files have modified filenames. If you choose to generate the ancillary JPEG preview file when extracting, you will notice that filenames with spaces are modified to have dashes instead. For example, the JPEG of the file "My Example.ai" will be "My-Example.ai.jpeg" instead of "My Example.ai.jpg". This is because Illustrator forces filenames without spaces.

How can I keep the last word without devision?

Hallo! By applying page brake if it is a word at the end which has a syllable division the division line disappears so that I have an orthographic error: e.g. if the last word is "marketing" and is being devided:
Before: End of current page: marke-
Start of next page: ting.
After applying page brake:
End of current page: marke
Start of next page: ting.
How can I keep the last word without devision?

In the Hyphenation Options dialog, uncheck the option "Hyphenate across
columns"

How can i view a downloaded word document in pages?

how can i view a downloaded word document in pages? i tried to download a file, which worked, but i can't view it since i don't have word office

Not sure what you are saying but Pages just opens Word documents, drag the Word document onto Pages' icon.
Or open the Word document from the Open dialog.
If you are talking about testing a Word document after you have exported it from Pages then you will need of course to have Word to open it but there are free clones of Word as well such as LibreOffice, Openoffice and Neoffice that will do that as well.
Peter

How avoid of dialog in MS Word 97 during Save As HTML with JACOB...

Similar Messages

Maybe you are looking for