How awsome is this setup process?

Sorry, maybe smalltalk, but after a long time I used the setup process again to reinstall ArchLinux and, damn, how awsome has this setup process become? I remember 0.7.2, not too bad but stupid sometimes. But now?
If this piece of software would be a girl...

Your setup is just fine.
With WPA2 Personal security enabled, which is the strongest encryption you can use for home use, you are in good shape there.
DHCP is the process of assigning IP addresses to devices on the local network and your Time Capsule is doing this as you have it configured.
The NAT firewall built into the Time Capsule will do an excellent job of shielding your private network from the Internet, so you are in good shape there as well.

Similar Messages

  • What are some of the best iOS apps can remotely played videos, audios, photos and text files from a NAS hdd connected to Airport Extreme USB port? And how to configure this setup?

    I have already set up NAS hdd as connecting it at USB port of Airport Extreme, i also want to remotely access it from iPhone, so what's the next step? What are some of the best iOS apps can remotely played videos, audios, photos and text files from the NAS hdd and how to configure this setup?

    *Edit - I am not able to connect to the NAS when hardwired to the airport extreme.

  • How secure is this setup

    My setup is as follows
    Qwest actiontec gt7100-wg dsl modem set to bridging mode attached by Ethernet cable to
    Time Capsule set to PPPoE
    I am assuming that the TC is doing NAT as it is handing out IP addresses in the 10.0.1.2 range
    The TC is password protected using WPA2
    Is there anything else I should be doing????
    Thanks in advance

    Your setup is just fine.
    With WPA2 Personal security enabled, which is the strongest encryption you can use for home use, you are in good shape there.
    DHCP is the process of assigning IP addresses to devices on the local network and your Time Capsule is doing this as you have it configured.
    The NAT firewall built into the Time Capsule will do an excellent job of shielding your private network from the Internet, so you are in good shape there as well.

  • How to map this Business process

    Wanted to dispatch Goods thru Stock transfer from plant A to plant C which are in two different states. Further Plant C doesn't have unloding point hence the goods are unloaded at Plant B an intemediate location.
    For this presently one STO is created from plant A to Plant B and another STO from plant A to C. Goods are transferred thru delivery and movement types 641 to location B & C.
    Hence on system delivery is appering twice in stock transfer reports against plants B & C.
    How this procedure can be mapped in single transaction.
    anya

    any reply .

  • How to stop update work process

    hi
    this is mahesh
    in my dev server 3 update workprocess are running very long time .how to stop that 3 update workprocess .i am already deleted the error update record in sm13
    pls tell me how to change this work process running mode to waiting mode.pls give me solution.

    Hi mahesh,
    I guess you want to terminate the workprocesses.
    Go to SM50 select the update process you want to terminate then in menu bar goto <b>Process </b> and then select <b>Cancel without core</b>.it might take some time but the workprocess will get terminated.
    In case it takes too much of a time kill it at OS level.
    Please award points accordingly.
    Regards.
    Ruchit.
    Message was edited by:
            Ruchit Khushu

  • The FaceTime app on my iPod touch refuses to go any further than the email verification part of the setup process. It just goes back to the sign in screen every time. How can I fix this?

    My built in FaceTime app on my iPod touch will not proceed from the email verification step of the setup process. I have tried going into settings like app support showed but when I click FaceTime it just shows the sign in screen just like before and does the same thing. Please help me to fix this.

    See:
    iOS: Troubleshooting FaceTime and iMessage activation
    iOS: Troubleshooting FaceTime

  • When i login to MES operator resp..i get a error saying...You must setup an HR employee for this Oracle Application user...how to resolve this?

    when i login to MES operator resp..i get a error saying...You must setup an HR employee for this Oracle Application user...how to resolve this?

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • How to resolve this Error ORA-04030: out of process memory when trying to a

    Hi
    I am connecting as a sysdba and trying to execute a query on the V$Logmnr_contents but getting the following Error
    ORA-04030: out of process memory when trying to allocate 408 bytes (T-LCR
    structs,krvuinl_InitNewLcr)
    Can anyone guide me how to resolve this issue.
    Thanks

    Hi,
    As root user, edit the /etc/sysconfigtab file, and try to set the udp_recvspace parameter to 262144 and reboot the machine :
    inet:
    udp_recvspace = 262144
    Metalink note 297030.1 Ora-04030 During Execution Of LogMiner Query
    Nicolas.

  • I have an older Airport Base Snow that I gave to my brother to use for his apartment. It's connected to a cable modem and I have a network but it is not protected. How do I set a password? There is no computer in this setup, just an iPad

    I Have an older Snow Airport Base that I gave to my brother to use in his apartment. It is connected to a cable router. I have a network established but it is not secure. How do I password protect this network? There is no computer in this setup, only an iPad. Thanks!

    If this base station is actually the "snow" then you will need a Mac or PC that can run a version of the AirPort Utility that can administer this "very old" 802.11b base station. You won't be able to do so with an iOS device or Mac running Lion or newer OS.

  • How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"?

    How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!

    Hi csreddy, 
    If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
    http://support.apple.com/en-us/HT204204
    Update your device using iTunes
    If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
    Install the latest version of iTunes on your computer.
    Plug in your device to your computer.
    In iTunes, select your device.
    In the Summary pane, click Check for Update. 
    Click Download and Update.
    If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
    Find out what to do if you get other error messages while updating your device.
    Last Modified: Jan 12, 2015
    Apple - Find Locations
    https://locate.apple.com
    Contact Apple for support and service - Apple Support
    http://support.apple.com/en-us/HT201232
    Regards,
    - Judy

  • My iPhone 5 charger stopped working. It's under warranty and I want to send it back. How do I initiate that process? The website keeps sending me in circles.  I'm getting an error message when I put in my serial number.  Why is this so difficult?

    My iPhone 5 charger stopped working. It's under warranty and I want to send it back. How do I initiate that process? The website keeps sending me in circles.  I'm getting an error message when I put in my serial number.  Why is this so difficult?

    If posible you will find visiting a store by far the simplest way of getting a solution
    Which Country
    are you in ?
    Have you checked the lightning socket on iPhone doesn't have lint or fluff in it
    solves majority of such issues

  • I have a box of dvds, and i would like to transfer them onto my computer on itunes and then onto my iPad. Does any know how to do this in a step by step process?

    I have a box of dvds, which I would like to transfer to my intunes account on my laptop. I then what to transfer the dvds to my ipad. Does anyone know how to do this in a step by step process?

    If you have an iPod Touch running iOS 4.3.3 or later, you can download the songs in the purchased tab of iTunes on the iPod.
    http://support.apple.com/kb/ht2519

  • How do I start my setup process all over again?

    How do i start my setup process all over again?  I didn't complete it and I don't think its registered. My PC's iTunes does not see it.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    Try another cable
    Try on another computer
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                              

  • How to achieve this process in SAP SD module??

    Hi,
    I want to know whether this kind of scenario could be achieved in SAP system SD module??
    We have only one material which the value or price is 10000USD, and this material could be only used 5 times. Everytime it is used, it will be goods issued in the system,  and its value will be decreased 2000USD, this means this material will be drawn back into system and its value will be showed as 8000USD.  And next time it will be 6000...4000...2000...0
    After 5 times this kind of process, then this material is no-used any more.
    I just want to know could 'Draw back' and 'decrease 2000USD everytime'  'show 'previous value - 2000' as new value every drawn back time' ....
    how to achieve this in SAP SD system??
    Thank you very much.

    Hi,
    This can be mapped in Foreign trade.You need to use Licensing functionality.Each  time you use it,  it  depreciate by document value.
    Thanks,
    Vrajesh

  • Cannot update my iPad2 to 5.1 An unknown error message cancels the download process. Could you please inform me how to fix this issue? Thanks!

    Cannot update my jail broken iPad2 & iPhone 4S to 5.1
    An unknown error message cancels the download process. Could you please inform me how to fix this issue? What is also odd is the fact that the update through iTunes is substantially bigger than downloading it directly OTA, although both methods have been unsuccessful so far...
    Thanks!

    About the only thing you can try is using the Online Internet Recovery system to reinstall Lion on your Mac over the top of the current install. that will reset all system files and should not touch your personal files or the apps you have installed.
    Or iof you have a recent Time Machine backup use that to restore your Mac to that point in time.

Maybe you are looking for