How bad is T430s/T420s's screen?

Heard tons of horror stories about the HD+ screen. Is it not as good as IPS bad or just totally unusable bad?

It depends on who made the screen. I just had mine replaced. New screen is a Samsung LTN140KT03-401. I like it and no screen door.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

Similar Messages

How bad is alcohol on iPhone 3Gs screen

I took my iPhone 3Gs to a shop for screen protector. It was still in the box covered with the factory plastic film. The sales person removed the film and use a cloth with alcohol to wipe it before putting the screen protector on. I questioned him but he said that's the way to remove dust (??).
I was concerned and later on found out on internet and in the iPhone booklet that we should not use alcohol to clean iPhone.
Is alcohol abrasive please? And how bad is it to the oleophobic coating please?
Thanks in advance for your advise.

The sales person removed the film and use a cloth with alcohol to wipe it before putting the screen protector on. I questioned him but he said that's the way to remove dust (??).
Alcohol would be useful for removing greasy fingerprints (which shouldn't be a problem with a 3GS), but a cloth or facial tissue slightly damp with plain water is enough for removing dust.
I was concerned and later on found out on internet and in the iPhone booklet that we should not use alcohol to clean iPhone.
It won't damage plain glass, such as on the previous iPhones, but I wouldn't use it on coated glass without knowing something about the coating.
Is alcohol abrasive please?
It's not abrasive, but could soften or dissolve some coatings.
And how bad is it to the oleophobic coating please?
Even if it did no damage, I wouldn't use it again.

Screen tilt? How bad is it?

I have heard much talk and debate about the "Screen tilt" common in the new nano line...how bad is the tilt? Is it very minute? Or is it obvious?
Also...is there a place where i can view a picture of this screen tilt?

In the interest of sparing multiple threads on the same subject...
There is a lengthy thread located at:
http://discussions.apple.com/thread.jspa?threadID=1123662&start=0&tstart=0
That covers this topic in great detail. Page 7 has some links to videos where the screen appears obviously tilted. I am sure you will be able to find answers to all your questions on the tilt in that thread.

Just how bad is the HD screen on the T530

Hey everyone. I'm buying a laptop for my father whose main criteria are:
Overall build quality
(backlit) Keyboard and trackpad quality
At least 15" screen
Upgradeability
International warranty and customer service
Whilst it is overkill for what he wants to do, AFAICS the T530 is the only thinkpad that fits the bill.
The only problem is his eyesight isn't what it used to be and he needs eye-glasses to read the screen on his current laptop which has a 15" 1366x768 display. Hence, a higher resolution screen is out of the question (I understand there is dpi scaling but it is never implemented perfectly across all apps).
I see people warning against the HD display all the time, so I'd like to know just how bad is the contrast, colour reproduction etc?

I understand where you're coming from however I don't mean travel like how a businessman travels. My father just spends a lot of time abroad and an external monitor will not be practical. I'm surprised no-one seems to have any experience with the HD screen. Thank you for your suggestions though.

How bad was your screen cracked?

Hi, today as I got out of the car I slipped and dropped my phone, you can tell it hit the top right corner and shattered all the way from the top to the bottom, chipping the top area.
I can no longer use the touch screen, but I could when I had first dropped it, and there's big blobs of black. I'm going to attempt a walk-in for tomorrow, and see about getting it fixed, and wondered how bad yours was when you took it in, and if they made you flat out get a replacement or just fixed it? I don't know if they'll have to replace the LCD and then some or what but just wanted to know?

Apple or an Authorized Apple Service Provider has to check the phone and see if more than the screen got damaged. If yes, you'll have to pay the Out-Of-Warratny-Service fee for getting the whole phone replaced:
Screen repair service pricing
Repair and replacement costs depend on your iPhone model and your AppleCare product coverage. Apple will run a diagnostic test to determine whether your iPhone has experienced additional damage. If it has, or if it needs other repairs, you may need to pay an out-of-warranty service fee. Accidental damage isn't covered under the Apple One Year Limited Warranty.
Model
Screen repair cost
iPhone 6
$109
iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5
$129
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing. Pricing and terms vary for service through an Apple Authorized Service Provider.
Out-of-warranty repair service
If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
Read Apple’s Repair Terms and Conditions
Model
Out-of-warranty service fee
Battery service*
iPhone 6 Plus
$329
$79
*available only if battery
fails Apple’s diagnostic test
iPhone 6
$299
iPhone 5s, iPhone 5c, iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS, iPhone 3G,
Original iPhone
$149
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
copied from Service Answer Center - iPhone

BADI for Customer's own screen for Purchase Requisition.

Hi All,
I have a requirement where I need to create a BADI implementation for creating addition screens in the Purchase Requisition Transaction (ME51n/ME52n/ME53n).
I know there are User exits but we donu2019t want to implement them. Now in case of PO there is a standard SAP given BADI -> ME_GUI_PO_CUST for Customeru2019s own screen but as far as my understanding goes there are no such BADIs for Purchase Requisition.
Could anyone please advice if I can create a Custom BADI similar to ME_GUI_PO_CUST for PR for adding the screen and throw some light on it like how can this be achieved?
Thanks,
Ameesha

Thanks Darek for replying back and the BADI ME_BAPI_PR_CUST looks helpful but could you please help me in understanding how can i create my own custom screens within ME51N / ME52N / ME53N tcode using the BADI , ME_BAPI_PR_CUST.
For example in PO, we have the BADI ME_GUI_PO_CUST, with several methods like SUBSCRIBE and others which we can make use of for creating screen exits but what in the case of PR fpr BADI ME_BAPI_PR_CUST. i couldn't find any sample code for implementing this.
Any help is greatly appreciated.
Thanks,
Ameesha

Just how bad is this phone ? (E70 revisited)

I have actually forgotten how frustrating Nokia phones can be as I had confirmed by (then) new E70 to the bottom drawer because with the firrmware on it, it wouldn't work in my bluetooth enabled BMer.
What joy when I learned of the new version. Could it be that version 3.0633.09.04 (where do these numbers come from) would solve my problem ?
Well I don't know. In fact I don't even know why I tried to put it on the phone. First I downloaded the latest PC Suite (the phone I have which actually works is NOT a Nokia, so I didn't have that on the PC ). Then I downloaded the software updater. Then I connected by recharged (and still plugged into the adaptor) E70, and fired up the updater.
Next the USB message that my phone was disconnected from PC-Suite appeared, and as predicted the updater actually told me there was an update. I now had the option to leave or continue. When I continued, I got a message which told me the updater could not verify my phone !
No WAIT !! I got past this by restarting, and while the message to get out was still on the screen, I used the utility in PCSuite to reselect my phone, and when the updater continued it started the download of 48.1M. Great.
Next it came to the update bit. Again the process failed and again the solution was to do the little tinker with PC Suite to get past that point. In fact I got all the way to where the phone reboots, and shows the Nokia test screen. Here the phone seems to reconnect itself, but either its not fast enough or it's not connecting to the updater, because it reports that the update has failed. Sad but true.
Should I have known ? Should I have guessed ? I have a buddy who has had an E61, an E70 and now wants to try the E90. Is he crazy or what ? S60 does for telephony what Locusts do for corn. If only words would describe how bad this series of phones really is...
For those of you still here, who are in the queues for the E90, I admire your sense of endevour ! May the force be with you.

02-Oct-200705:53 PM
joevpt wrote:
You'd think... Eh!
What I found was that at various stages during the upgrade the NSU disconnects from the phone (which allows PC-Suite reconnect). When the NSU needs to reconnect, PC-Suite was holding onto the connection (because, I think, NSU only disconnects it once at the beginning... )
Regards,
Joe
Patheticlly true.

How bad does my iPod touch battery have to be to get a replacement battery?

My iPod battery seems to be not holding charge very well at all. I was thinking about making an appointment to get a new battery at the Apple store. But just how badly functioning does my battery have to be to get the replacement? I'm still under warranty.
Also, will they just replace my battery, or the whole iPod? If they only replace my battery will my data be saved?

Apple generally replaces these type of items.. even if its a battery issue. They use to be more lenient about replacing the product, however due to everyone taking advantage of it, now they test it first to see if what you are saying adds up. My advice is, you should take it there and have them test the battery and if it is really big noticable difference from a good battery charge they will replace the whole product.
As far as data... you need to backup the ipod onto your computer before you go there! or you WILL lose all data!
Also, if a battery does have poor performance within under a year; your probably not charging it right and or have the screen brightness on to high along with wifi always turned on and blue tooth!
Hope this helps Lauren!

How to define our own selection screen for logical database in abap-hr?

Hi Friends,
Can u please help me
How to define your own selection screens for logical database.
we use to do like(goto->attributes-HRReportcatagerious ).but How to desin using customer table like t599c, t599f and how to add to my logical database?
Thanks in advance
charan

check out this online help
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/dba65c35c111d1829f0000e829fbfe/frameset.htm
Regards
Raja

How to open images in Fill Screen mode from Camera Raw

I am using Photoshop CS4 for Windows. I created an action that executes Fit on Screen and set the Scripts Event Manager to execute that action on the Open Document event. This works when opening a document from Photoshop.
Here are my questions:
1) After opening a raw image from Bridge in Camera Raw, when I then open the image in Photoshop, it does not run the Open Document event action to Fit on Screen. What event do I need to set the action to execute on when opening an image from Camera Raw in Photoshop?
2) I added Fit on Screen to the action by selecting Insert Menu Item from the Actions menu and then selecting View-Fit on Screen. I cannot find Fill Screen on any pull-down menu (the button found on the Hand tool bar). How can I insert the Fill Screen item (which fills the screen a little more than Fit on Screen?
3) In the Scripts Events Manager, when you select Add an Event, it says Any scriptable event can be entered here. See the Scripting Reference for the full list of Photoshop event names.. On the following Adobe webpage, I found the Adobe Photoshop CS4 Scripting Guide but I did not find a list of Photoshop event names in that document. Where can I find the list of Photoshop event names?
http://www.adobe.com/devnet/photoshop/scripting
Thanks to anyone who can help me out.

> 3) In the Scripts Events Manager, when you select Add an Event, it says Any scriptable event can be entered here. See the Scripting Reference for the full list of Photoshop event names.. On the following Adobe webpage, I found the Adobe Photoshop CS4 Scripting Guide but I did not find a list of Photoshop event names in that document. Where can I find the list of Photoshop event names?
>
>
>
See "Appendix A: Event ID Codes" in the PSCS4 JavaScript Reference pdf file that
comes with PSCS4.
-X

HT4085 How do I lock my ipad screen so the swipe action and side button on screen don't work? My cats do these things and the game disappears.

How do I lock my ipad screen so the swipe action and the side button on the screen do not work? When my cats play a game on my ipad, they regularly swipe the screen and push the side button and the game disappears.

The button on the top that you use to lock and unlock or put to sleep is the power button. The button lower center of the screen is the home button...can be used to also wake from sleep and switch to the base home screen.
Good to hear you are now able to lock rotation, even if you are not sure how you did it
If you go to the iBook icon, tap Store in the uppper left side of the screen, you can search for the iPad User Guide...a free download that will place the guide in your iBooks library as a great source of background information.

How i can show the selection screen input field in the top of page in alv

hi ,
          how i can show the selection screen input field in the top of page in alv grid output.
tell me the process

Hi,
excample from my program:
FORM topof_page.
DATA: l_it_header   TYPE TABLE OF slis_listheader WITH HEADER LINE,
        l_info        LIKE l_it_header-info.
DATA: l_it_textpool TYPE TABLE OF textpool WITH HEADER LINE.
DATA: l_key LIKE l_it_textpool-key.
READ TEXTPOOL c_repid INTO l_it_textpool LANGUAGE sy-langu.
DEFINE m_selinfo.
    if not &1 is initial.
      clear l_it_header.
      l_it_header-typ   = 'S'.
      l_key = '&1'.
      translate l_key to upper case.
      read table l_it_textpool with key key = l_key.
      if sy-subrc = 0.
        shift l_it_textpool-entry left deleting leading space.
        l_it_header-key = l_it_textpool-entry .
      endif.
      loop at &1.
        case &1-option.
          when 'EQ'
            or 'BT'
            or 'CP'.
            write &1-low to l_it_header-info.
          when others.
            write &1-low to l_it_header-info.
            concatenate &1-option
                        l_it_header-info
                   into l_it_header-info
                   separated by space.
        endcase.
        if not &1-high is initial.
          write &1-high to l_info left-justified.
          concatenate l_it_header-info
                      l_info
                 into l_it_header-info
                 separated by space.
        endif.
        if &1-sign = 'E'.
          concatenate ']'
                      l_it_header-info
                 into l_it_header-info.
        endif.
        append l_it_header.
        clear: l_it_header-key,
               l_it_header-info.
      endloop.
    endif.
END-OF-DEFINITION.
m_selinfo: s_trmdat,
             s_trmext,
             s_trmint,
             s_fkdat,
             s_delno,
             s_vbeln,
             s_deact,
             s_kdmat.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
            it_list_commentary = l_it_header[].
ENDFORM.
I hope, this will help you.
Regards
Nicole

How can I make my email screen smaller?

How can I make my email screen smaller?

Just what do you mean?
Can'ty you just resize the window with the mouse cursor like other windows?

How can I hook up 3 screens to a Mac Pro 8 core 2010 model?

How can I hook up 3 screens to a Mac Pro 8 core. One is a 23' Apple Cinema Display, the second is a 20" Apple cinema display and the 3rd is a 32' Sony Bravia HDTV (connected to mini port with mini/HDMI connector) Do I need to buy another video card? I have heard about 4 different scenarios about this, and they all sound a bit complicated. I thought that you could automatically connect 3 displays with the card that comes with the MacPro. It has a DVI port and 2 mini ports, so it appears that would be for 3 displays. But this is where it gets strange. Any thoughts?

Which video card? 5x70? If you read about the various scenarios thern for 5x70's you need two active adapters for thee monitors (TV considered a monitor). And you should have seen references to these apple docs:
Mac Pro (Mid 2010), Mac Pro (Early 2009): Issues with three displays and multiple DVI, HDMI connections
Mac Pro (Early 2009), Mac Pro (Mid 2010): Supported display configurations
It's not really complicated. Search out the appropriate adapters and hook 'em up. For the 23" and 20", if they are DVI, you need single link adapters. For the TV, if you end up using the DVI port for it (because possibly you can't find the appropate adapter cmbination) then you need to handle the audio separately since DVI doesn't carry audio.

How to replace the existing selection screen with new selection screen

Hi,
I have first selection screen with parametre as a table name, then I have created dynamic selection screen as 2nd selection screen with different fields of that table as select options. This is done using genaration of dynamic report. Now If I click on button on this 2nd selction screen , then I want to replace this 2nd dynamic selection screen , with the other selection screen fields.
Can anybody guide me, How to do replace one slection screen with different selection screen.
and one imp thing is this selction screen is populating with dynamic fields on it.
Regards,
Mrunal

As I can understand you want to make some of the screen field to disable or visible on screen depending upon the interaction of user with screen 1.
You may use this example code in PBO of screen 2.
LOOP AT SCREEN.
    " action has been taken to modify the area office screen as per the option chosen at screen 99.
    CASE ACTION.
        " if the user has taken up the option of UPLOAD
      WHEN 'UP'.     " screen processing while we upload the plan
        " during upload we will make dates as output fields only
        IF SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_TO' OR SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_FRM'.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
        ENDIF.
        " also make 2 buttons disabled
        IF SCREEN-NAME = 'AO_DO' OR SCREEN-NAME = 'AO_VE'.
          SCREEN-ACTIVE = 0.
          MODIFY SCREEN.
        ENDIF.
      WHEN 'DN'.      " screen processing while we upload the approved plan
        " during upload we will make dates as output fields only
        IF SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_TO' OR SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_FRM'.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
        ENDIF.
        " also make 2 buttons disabled
        IF SCREEN-NAME = 'AO_UP' OR SCREEN-NAME = 'AO_VE'.
          SCREEN-ACTIVE = 0.
          MODIFY SCREEN.
        ENDIF.
      WHEN 'VW'.      " screen processing while we view the plan
        " during upload we will make dates as output fields only
        IF SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_TO' OR SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_FRM'.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
        ENDIF.
        " also make 2 buttons disabled
        IF SCREEN-NAME = 'RLGRAP-FILENAME' OR SCREEN-NAME = 'FNAME'.
          SCREEN-ACTIVE = 0.
          MODIFY SCREEN.
        ENDIF.
        " and hide the file input field
        IF SCREEN-NAME = 'AO_DO' OR SCREEN-NAME = 'AO_UP'.
          SCREEN-ACTIVE = 0.
          MODIFY SCREEN.
        ENDIF.
    ENDCASE.
ENDLOOP.

How bad is T430s/T420s's screen?

Similar Messages

Maybe you are looking for