How bad would it hurt my iMac after power went off while using?

I was using my iMac and then the house power went off. I still be able to turn it back on after the power came back. But I dont know how bad did it hurt my iMac after that? Anything to worry about?

You should check the file you were working on when the power went out. For example, if you were surfing the web, there is nothing to worry about. If you were creating a text document, odds are that it is fine, but it may have lost what you were typing in the moment. If you were in the middle of a time machine backup, then the backup may be corrupted, but Time Machine should be able to right itself - but it may take a long time to reindex.
If a large surge of current went through, you would likely notice severe symptoms, like the display going black or the iMac failing to boot up.
I used to use surge protectors, but now I use a backup power supply (which includes a surge protector). That way, if power goes out, I can continue working for 5 to 15 minutes, and the computer will do a normal shutdown if the power outage is longer.
I use the APC Backup UPS with 1300 xs1300va.

Similar Messages

  • HT201412 my ipad3 does not turn on after it went off while using it, anyone with same experience and have it resolve already?

    my Ipad 3 will not turn-on after it went off while using it, anyone with the same experience and have it resolve?

    Is the battery charged?
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • How do I set up my Imac after adding a SSD along with my existing HD

    How do I set up my Imac after adding a SSD so that my system and apps are on the SSD and everything else is on the HD?  I am using mountain Lion.  I want to make sure I can still do Time Machine backups. 
    I was planning on first formatting the SSD and then using Migration Assistant to copy the System and the Library and the Apps over.  Where it gets confusing is the User account where some of the items will be on the SSD but I want all my folders to be on the HD.  Do I just not copy over that other stuff and once I restart from the SSD it will know where all the folders are?  Is there anything I need to know about setting up a time machine backup after that?  Will the backup I had from the one drive have to be erased and start a whole new backup?
    I just want to do this right so I don't have some major problems.
    Thanks for any help.
    Michael

    time machine backed up your whole system data/everything in time machine hdd.
    you want to use ssd over hdd so you need to put new mac os x in ssd.
    then copy all the stuff that you want to put in ssd.
    from my point of view put the mac os x and other application in ssd and leave other data in hdd.(music,movies,etc....)
    more info about time machine : http://support.apple.com/kb/ht1427

  • Hi. I am using iphone 3gs running on ios 5.1.1. I didn't find any software update option at any place in setting.  Please tell me how can i get it or how i would be able to download and install ios update without using computer

    Hi
    I am using iphone 3gs running on ios 5.1.1
    I didn't find any software update option at any place in setting.
    Please tell me how can i get it or how i would be able to download and install ios update without using computer

    Just use the phone the way it is, forget the apps.

  • How is it possible that my Imac says: no available updates while I am running 10.6.8??

    how is it possible that my Imac says: no available updates while I am running 10.6.8??

    McS1672 wrote:
    how is it possible that my Imac says: no available updates while I am running 10.6.8??
    This Usually means your Software is Up to Date...
    Were you looking for any Particular Update...?

  • How do I  turn music completely off while using maps

    How do I turn the music off while using apps for directions. Every time I use maps to navigate somewhere I get music that comes on automatically anyone know how to turn this off?

    Just disabling firewire at the system settings not physically shuts off power to the firewire port. And since you feel by yourself facing a hardware defect, I would recommend taking the computer to a repair center.
    Maybe they are able (I'm absolutely not sure about, but sometimes hope dies at last to remove an internal cable and so shut down the firewire ports without replacing any expensive parts.

  • Hi,i was about to update my software version of i phone 4,but suddnley power went off.now my phone is not recognised ,and my phone doesn't work,how to reinstall operating system,please help me.....

    hi,i was about to update my software version of i phone 4,but suddnley power went off.now my phone is not recognised ,and my phone doesn't work,how to reinstall operating system,please help me.....

    Put the device in DFU mode: http://www.iclarified.com/entry/index.php?enid=1034

  • After effects instantly crashes while using opengl with nvidias new drivers 178.24

    Since I installed nvidias new drivers 178.24, after effects instantly crashes while using opengl. Anyone else experienced this?
    I have Geforce 8600 GT.
    As a minor note, I had major problems with the new quicktime 7.5.5 update, both After effects and Premiere got problems with interpreting footage and frames here and there got the "missing frame" look. I also got more problems so I uninstalled it instantly. Is there a major problem with the update or a major problem with me?
    Thanks
    / Olle

    I use Vista (in retroperspective this was probably a mistake, but the company wanted to test the capabilities with Vista when we bought the computer a year ago). And specs are:
    *Graphics: Asus Extreme GeForce 8600GT SILENT 512MB DDR3 TV-out HDTV DUAL DVI RETAIL PCI Express
    *HD: Samsung HD501LJ 500GB 7200rpm 16MB SATA2
    *Audio: Creative Sound Blaster X-Fi Xtreme Audio Retail
    *Mem: Corsair QUAD2X4096-6400C5DHX QuadDHX 4x1024MB (tot. 4096MB) Kit DDR2 XMS2-6400 800MHz
    *Motherboard: Asus P5K iP35 4DDR2-DIMM 3PCI 3PCIe SATA Raid Audio GB-LAN Firewire Socket775 ATX
    *Processor: Intel Core 2 EXTREME QUAD QX6850 3.0GHz 8MB FSB1333 Boxed (with cpu-cooler!) Socket 775
    *Power: Sirtec/Chieftec CFT-750-14C 750W 140mm fan ATX2.0 20/24-pin 4/8-pin 12V Modular
    Sorry not to give more info on the Quicktime problem, I don't remember exactly what more problems there where as we have had extremely much to do these last couple of weeks and I just freaked out and uninstalled it as soon as the problems emerged. I do remember the frame issue however, it was very clear, i imported an image sequence in premiere and everything worked fine, then i updated and frames were suddenly dropped, then i uninstalled and installed 7.5 again and it worked just fine. I also tried to flush the cache, restart and generally search for the source of the problem for a couple of hours.
    / Olle

  • What would cause the original I Pad shut itself off while playing games or online? it is not a battery issue or time issue. When I turn it back on it goes to were I was  when I was online ,but have to start games over.

    What would cause the original I Pad shut itself off while playing games or online? it is not a battery issue or time issue. When I turn it back on it goes to were I was  when I was online ,but have to start games over.

    The original iPad has a slow processor and only 256 MB of memory so it often runs into low-memory failures.
    Double click the home button and dismiss all of the recents - I do that weekly.
    Then reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider - I also do that weekly.
    Both seem to help to reduce the low-memory faults that occur.

  • How bad will this hurt?

    I have been considering buying a RV for a while. My boys aren't getting any younger. We currently have our house on the market. It seems like it is going to take forever to sell. My question is how bad do you think it will hurt my credit if I were to take out a small loan for approx $10,000 for a RV? My credit scores on fico 8 are around 660-670. I know waiting until after we buy a house is probably the best idea, but it just doesn't seem like it's going to sell anytime soon and I am dying to go camping and enjoy the summer with my husband and two boys.

    Kyliemarie85888 wrote:
    I have been considering buying a RV for a while. My boys aren't getting any younger. We currently have our house on the market. It seems like it is going to take forever to sell. My question is how bad do you think it will hurt my credit if I were to take out a small loan for approx $10,000 for a RV? My credit scores on fico 8 are around 660-670. I know waiting until after we buy a house is probably the best idea, but it just doesn't seem like it's going to sell anytime soon and I am dying to go camping and enjoy the summer with my husband and two boys.How about teaching your boys the joy of camping in a tent while hiking in the mountains or in a campground?  Most boys would rather do this than hang out in a motorhome.  (Motorhomes: Think retirees). I have been reading a lot about personal finance and the rule seems to be borrow only for necessities, pay cash for luxuries.    Just something to think about. I know RV's can easily cost 60K - 100K or more, so I might be concerned about a 10K RV needing expensive repairs. Your boys won't be boys forever, but the important part is that you spend time with them.  They don't need an RV to enjoy their parents. You could also rent a lot of nights in a nice cabin for less than 10K if you don't like sharing your bedroom space with bugs and bears.

  • How can i start my iphone 5 after it went on safemode and itunes cant help me!! i was trying to update it!!

    how can i start my phone after it went on safe mode while i was updating it!! it says i need to connect with itunes but when i doo it tells me its an error !! i cant use my phone at all!!

    modular747,
    Had same problem, got answer from supprot community and it worked.
    Hold down your power bar (on top) and your Home button (on face at bottom) for about 10 - 20 sec. and your phone will be restored - nothing lost or changed.  Worked like a charm for me 20 sec ago.
    Good luck

  • How To Remove Autorun of PREVIEW Application after Power On of IMac?

    Hi all,
    Need Help here.
    Everytime I power on my IMac it automatic run the application "PREVIEW".How to remove this "Autorun" ?
    Thanks!

    Hello Justrain
    If you click on....
    Blue Apple ( top left of your screen there ) > System Preferences > Accounts > Log in items.
    Is preview highlighted there?
    If it is, you can " de-select " it from the list. That should cure the problem for you. I hope it does.
    Regards
    Ian

  • I have a "vintage" macbook with OS X 1-.6.8 quicken 2002. How badly will it hurt to upgrade to OS x M Lion? I have heard I may loose all apps older than 2008? Help me get to the Cloud! That's what I want so that I can then transfer all info to a new MAcbo

    I have a "vintage" macbook OS X 10.6.8. I want to get all of my information to the Cloud. I must upgrade to Mountain Lion. I have heard I may loose all of my applications pre 2008. Can anyone help me with this? Most important is my contact list in Mail.

    You don't need the Cloud to transfer your data. The first time you boot your new Mac it will boot into Setup Assistant, then prompt you to transfer the data, apps and settings from your old Mac. Do it then, after that it will create a new user and will be problematic.
    Check the compatibility of your third party software here.

  • Imac wont start after electricity went off, no power surge. Apple Hardware Test ,no trouble found, please can anyone help,thanks ,Andy

    Hi, please can anyoner help. I had a power cut at home and went to switch the imac back on and all i can get is a  grey screen, a chime and a circle going around but no blue screen when I start up .I have tried pressing the power button for ten seconds with it switched off .Tried installing back up discs and after about an hour it comes up with an error that caused installation to fail and to contact the software manufacturer,   tried again and the same happened. Tried apple hardware test and test results say no trouble found so am trying the extended test .any help would be great, thanks,Andy. 

    Try resetting the smc and pram.
    To reset the smc
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    To reset pram
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • In Pages 5.1 how do I change the default spacing after a paragraph? I used to be able to do this with the inspector. I no longer see the option.

    In pages 5.1 I was wondering how to change the line spacing after a paragraph.

    This is from the online Pages Help . You have the option to the Help in your Pages Help menu
    Adjust line spacing
    You can adjust the spacing between lines in a paragraph, and change the amount of space before or after a paragraph.
    Click in the paragraph whose spacing you want to change, or select one or more paragraphs.
    In the Text pane of the Format inspector, click Style.
    Click the disclosure triangle next to Spacing, then choose an option from the pop-up menu:
    Lines: Choose when the distance between ascenders (parts of letters that extend to the top of the line) and descenders (parts of letters that extend below the line) should stay the same. The space between lines is proportional to the font size.
    At least: Choose when the distance between lines should remain fixed (but not to overlap if the text gets large).The distance from one line to the next will never be less than the value you set, but it may be larger for larger fonts to prevent overlapping text lines.
    Exactly: The distance between the baselines.
    Between: The value you set increases the space between the lines, instead of increasing the height of the lines. By contrast, double-spacing doubles the height of each line.
    Click the arrows next to the spacing field to set the amount of space for the option you chose.
    To adjust the amount of space before and after the selected paragraph, click the arrows for Before Paragraph and After Paragraph

Maybe you are looking for

  • DMS document in BSP

    Hi, I am trying to get a document stored in DMS in binary format (or string/xstring) to get it displayed in BSP screen. I tried using the FM - SCMS_DOC_READ (as mentioned in one of the forum thread), but couldn't figure out the inputs to the same. Ki

  • What should I do about an icon, "Rebuilt Library" that appeared when I "grabbed" the top of my iPhoto window?

    The icon appeared when I "grabbed" the top of my iPhoto window to move it across the desktop. I don't want to delete important files, and wonder what I should do about the icon. I am using Time Machine.

  • Server instance id

    Hi,           Is there a Weblogic API to programmatically determine a particular server's unique instance id running in a cluster?           thanks,           Nadeem.

  • ODI - IKM Oracle Multi Table Insert

    Hi All, I am new to ODI, i tried to use "IKM Oracle Multi Table Insert", one interface generates query like insert  all when 1=1  then into BI.EMP_TOTAL_SAL *(EMPNO, ENAME, JOB, MGR, HIREDATE, TOTAL_SAL, DEPTNO)* values *(C1_EMPNO, C2_ENAME, C3_JOB,

  • PHOTO BOOTH FREEZES WHEN OPENING ANY OTHER APP

    I am a fairly new Mac user after using Windows PCs for many decades so please bear with me on this. I purchased a new unibody MacBook Pro a few months ago and everything works as advertised except for one thing. If I am looking at myself in photo boo