How batch append cost center group to standard hierarchy by batch

Hi Guys,
Would you please tell how me how append cost center groups to standard hierarchy by batch, every time I have to do it one by one, is there  a convenient way? thanks.
Best Regards
FS

Hi,
You can create any number of cost center groups as per your requirement.
But one thing is crucial. If you crin your eate the groups using the T Code:OKEON. those will effect  to the standard hierarchy.
Cost centers created wil KSH1 will not effect to standard Hierarchy.
Main point here is the main hierarchy should be maintained in OKEON. Later you can add any number of groups to that. LSMW will work, before that Hirarchy Area(Cost center group) should be maintained in the system for effective work of LSMW.
Regards,
Pavan Kumar Arvapally

Similar Messages

  • How to get cost center group from cost center

    Hello
    I have cost center and i need to get the cost center group.
    Anyone having an idea how to get it???
    Thanks
    Parvez

    Hi,
    Cost centre could be assigned to different cost centre groups. For standard hierarchy, you can retrieve it from CSKS table, but for other groups SETLEAF table (class 0101) will provide you a complete answer.
    Regards,
    Eli

  • How to deleted profit center group from alternate hierarchy

    Hi All,
    I had created a alternate profit center hierarchy in tcode kch5. I want to delete one profit center group, but system is not allowing me to delete the same.
    I tried to delete the profit center group through tcode kch2 or kch3, but system is not allowing me to so, please help me know the procedure of the same.
    Is it possible to change position of profit center group in alternate hierarchy(kch5), please let me know the procedure of changing the position of the profit center group in alternate hierarchy
    Thanks & Regards,
    Prafful Kansal

    Please select the profit centers under the group and remove first than delete the group.
    Thanks
    Mohan

  • UPLOADING COST CENTER GROUPS

    Hi All.,
    In my project, where my client have lots of cost center groups. To assign them to the standard hierarchy it is taking too much time through Manual Uploading/assignment
    So,  is there any other option for it. (Automatic Procedure)
    Please, guide me.
    Thanks to All.
    Raja

    Hi,
    I don't think it is possible to attach Cost Center groups to Standard Hierarchy using BDC Program. When we attach the Cost Center Groups we have to select it individually. Probably, you can try by developing a BDC program.
    Thanks
    Murali.

  • Change in the cost center group

    Hi,
    Can we change the cost center from one cost center group to another group, when there are some postings in the cost center? If yes, how to go about it?
    help me out

    Yes you can!
    If you are planning to change within the standard hierarchy, Goto OKEON, drag, drop and save.
    Or you can go to KS02 for the cost center, in the basic data, you can give the new cost center group under the hierarchy area.
    If it is just non hierarchy cost center group, then go to KSH2 enter the old group, select the cost center, delete save, then go to the new cost center group and include the cost center.
    It does not matter whether it has been posted or not. It is just a grouping. But caution must be exercised. and there shall be a valid justification for doing so. Because the cost center may be used in various cycles. So better to check where and all the cost center is being used and then do the change.

  • Cost Center Group and Profit center Group

    Hi All,
    The Client is requested to have Cost Center Group in the CO reports. I have trying to analyse how to get Cost center group in the report or Info Provider.
    When i went to T-code KS03 in ECC ( Display Cost Center), i get the Hierarchy Area field called KHINR, which shows the Cost center grp. Upon discussing with Functional person, he has told that this Field lies in Table CSKS (Cost Center Master).
    Now i am thinking to enhance the Cost Center Attribute Dsrc. with this Field KHINR.
    I just want some suggestions or advice on how to bring Cost center grp and Profit center grp
    Thanks and Regards
    Edited by: Raihaan Khan on Dec 12, 2008 3:35 PM

    Hello Simon, Thanks again for all your FICO resolutions.
    Yes i truly agree that Cost Center Grp is CostCenter Hierarchy,, but i dont understand, y the Client has told that he needs the field KHINR in the Cost Center Report too.
    Actually he wants Cost Center Group wise report and NOT Cost center wise report.
    I have thght of extracting the Complete Std Hierarchy to 0COSTCENTER and then in the report , i can give a Cost Center Hierarchy Variable(probably a selection screen), such that the User can select the Nodes he want and then drill down the CostCenter Groups to see his respective Cost center accounting.
    Please opinionate on this
    Thanks

  • How to use LSMW using the IDOC to upload and maintain cost center group

    Hi Everyone,
    Is there anyone who knows how to use LSMW using the IDOC functions instead of the recording. I wanted to upload the alternative cost center group I created in the system. 
    reply would be greatly appreciated
    Warm Regards

    Hi Praveen,
    There is a risk trying to migrate data directly into standard tables because this can generate database inconsistences or wrong inserted data according to what is customized in the target system. I do not recommend migrate like this. 
    With LSMW you use objects like direct input programs, idocs, bapis and recorded batch input. Try to create a project and use an standard object for your data. Also, check in SXDA transaction (Goto-->DX programs) if there is a standard program for your data.
    Anyway, if you want to upload data directly to tables, read below thread:
    ["UPLOAD  CSV  FILE";
    [how to upload .csv file into a custom table;
    Regards,
    Roger

  • How to find the cost center group from cycle/ segment in CO module?

    Hi All,
    I need to fetch the list of cost centers in the cost center group against the cycle.
    Is there any table which will store the list of cost centers against the cycle?
    or else, what I was thinking is use of BAPI BAPI_COSTCENTERGROUP_GETDETAIL, which will give me the list of cost centers,
    but we need to pass the controlling area + cost center grp to fetch the cost centers from BAPI, I have controlling area with me but not the cost center grp name, only I have Cycle info lke cycle name, segment name, seq number. so how to find the cost center grp name from the cycle name?
    Regards,
    Mrunal

    FM: RK_AL_CYCLE_READ
    CHECK TABLE: T811K

  • Cant change COST CENTER GROUPS and/or Standard Hierarchy

    Hello all,
    im facing some problems during change of COST CENTER GROUPS and/or Standard hierarchy.
    When im trying to select im getting following error Value maintenance not allowed ->Standard Hierarchy
    When i do get the selection of the cost center that i want to remove from the hierarchy im getting this error Function is not supported in the standard hierarchy.
    I dont know anymore what to do.
    ive searched in forum and google but still didnt find enything usefull.
    Regards
    Laurynas Prikockis

    Hello,
    There is no word called removal in SAP. It would have been properly pronounced if say "Delete".
    In case of delete, I do accept, there should not be any planned or actual line items during the fiscal year. If there are any actual or planned lines items you cannot delete the cost center during that period.
    However, you can still delete the cost center in the next fiscal year if there are no actual or planned line items.
    Hope this makes clear.
    Regards,
    Ravi

  • How to receive the cost center group from legacy system

    Hi Experts,
    i need to collect  cost center group hierarchy from Legacy system.is there any standerd tcode available to get it.
    Usefull answers will be rewarded.
    looking forward to hear from all.
    regards,
    Tom

    Hi,
    Cost Center group can be viewed from field SETCLASS of table SETLEAF.
    To Fetch the relevant cost center from a cost center group, we can use FM: 'K_HIERARCHY_TABLE_READ'.
    Below thread may give you more details.
    Cost Center Group
    Regards,
    Ranjith.

  • Add Cost Center Group

    Hi Gurus,
    I'm trying to restructure the cost center hierarchy, OKEON,  I'm trying to add the cost center group M000400(already created) under M000600 is there already in the cost center hierarchy.
    But the system is not allowing me add an existing group.  How can I do it?
    Will assign good points.
    Thanks
    Prashanth

    Hi Sridhar,
    Sorry it is M000600 i wrongly mentioned M000300 as my earlier reply.
    No M000400 is not in the Standard Hierarchy, but it is a cost center group which got M000600 under M000400.
    And M000300 is a part of standard hierarchy and we want M000400 to be under M0000600.
    Please advice.
    Thanks
    Prashanth

  • Displaying only cost center groups

    Hi BW Gurus!
    There's a standard cost center group and cost center hierarchy in the source system that I was able to extract. My cost center infoobject (0COSTCENTER) had that hierarchy data. My question is, in the instance that I want to display only the cost center groups with its corresponding summation results, how will I able to go about it without having to display the whole hierarchy? Is that possible?
    Thanks in advance,
    Maan

    Hi Arun!
    Yes, the hierarchy would be cost center - cost center group.
    Thanks for the suggestions..
    1) The first option seems ideal with a structured hierarchy. The hierarchy I'm dealing with seems very complicated. The cost center group that I need to report on does not necessarily reside on level one of the hierarchy.
    2) It's quite embarrassing to ask but, I've really looked at the standard infoobjects and I haven't seen any that handles cost center group. Any ideas? Or, did you mean that I should create my own?
    Thank you so much again!
    Maan

  • Need a drop down list for cost center group

    Hello,
    I need to add the cost center group selection option to my program. I have added it to the selection options of my program and I would like to have a drop down list on this field. I have looked at the t-code KS13 and I am thinking that this is  what I need. I am not sure if this is a search help or something else. if this is a search help, is it possible to use the same search help in my program? can some please let me know how I would do this in my program?   possibly a code example?
    thanks in advance for the help.

    PARAMETER:     p_sostat(15) TYPE c AS LISTBOX VISIBLE LENGTH 16,
      name = 'p_sostat'.
      CLEAR sostatlist[].
      value-text = text-101. "'Open'(101).
      value-key = '1'.
      APPEND value TO sostatlist.
      value-text = text-102. "'On Hold'(102).
      value-key = '2'.
      APPEND value TO sostatlist.
      value-text = text-103. "'Drop/Pull'(103).
      value-key = '3'.
      APPEND value TO sostatlist.
      value-text = text-104. "'Pending'(104).
      value-key = '4'.
      APPEND value TO sostatlist.
      value-text = text-105. "'Floor'(105).
      value-key = '5'.
      APPEND value TO sostatlist.
      value-text = text-106. "'Kitted'(106).
      value-key = '6'.
      APPEND value TO sostatlist.
      value-text = text-107. "'Packed'(107).
      value-key = '7'.
      APPEND value TO sostatlist.
      value-text = text-108. "'PGI'(108).
      value-key = '8'.
      APPEND value TO sostatlist.
      value-text = text-109. "'EDI Error'(109).
      value-key = '9'.
      APPEND value TO sostatlist.
      CALL FUNCTION 'VRM_SET_VALUES'
        EXPORTING
          id     = name
          values = sostatlist.

  • Authorization on cost center group

    Dear all,
    I have to set up authorizations for reports (e. g. S_ALR_87013611) based on the cost center group (means the user should only see data of cost centers which belong to the cost center group he is authorized for).
    I think this should be possible via the authorization object K_CCA (field RESPAREA) but it just worked for entries in 'Cost Center' and 'Authoriz.Hier.' but not for 'Cost Center Group' (that's what I would need).
    Has anyone an idea how to solve this?
    We are running ECC 6.0.
    Thanks in advance!
    Regards
    Harald

    Hi,
    The relevant authorisation objects are as follows:
    K_CSKS_SET:  This will allow display/change/creation of groups based on activity selected.
    K_CCA:  This is a general authorisation object (relevant activites should be 0003, 3027, 3029).  You are  obviously trying to run a report.  For running a report the relevant authorisation object is K_REPO_CCA, which sadly does not have cost center group as a selection, only cost center values and ranges.
    However, K_CCA will work, if the cost center group that you have entered in the authorisation is also present in the standard hierarchy.  Can you test this, enter a cost center group from the standard hierarchy and not just any group that you have created seperately.  The authorisation should get restricted to that group.
    Cheers.

  • Get Name for CO Cost Center Group and BGD Processing

    Hi,
    I use these function modules to get the cost center group nodes in the CO hierarchy.
    If I pass it a value that is in two controlling areas
    if prompts another screen to pick which controlling area we want to look in.  My problem is when I try to run this report in the background it gets hung up on this screen waiting for input. any ideas on how to get around this.
    here is the reference code.
    thanks
    Please note that the following logic is parts of SAP example report
    RGSEX001.
    Get the internal Set-ID from the external name of the set
    Selection of sets can be restricted to a specific set class or
    to sets matching a specific table field.
    See documentation of function module G_SET_GET_ID_FROM_NAME
    If the set class, subclass and setname is known, function module
    G_SET_ENCRYPT_SETID should be used alternatively (see RGSEX020)
        CALL FUNCTION 'G_SET_GET_ID_FROM_NAME'
             EXPORTING
                  shortname = w_set
                  old_setid = w_setid
             IMPORTING
                  new_setid = w_setid.
    Read the complete hierarchy (set and all subsets)
        CALL FUNCTION 'G_SET_TREE_IMPORT'
             EXPORTING
                  setid              = w_setid  "Set-ID, not the Setname!!!
                  no_table_buffering = ' '
             TABLES
                  set_hierarchy      = it_hierarchy
                  set_values         = it_values.

    Hi!
    For reading cost center hierarchy you can try K_HIERARCHY_TABLES_READ.
    It returns near the same info as one you've mentioned, works well for single controlling area and I hope in case of ambiguity it will raise one of exceptions provided. Give it try.
    Regards,
    Maxim.

Maybe you are looking for

  • Help needed with Custom Web ADI Integrator for Mail Merge

    Hello, I've created a custom web adi integrator to generate letters to advise of end of probationary periods. The problem is that at the end of the process when the letter is opened in Word 2007, it only displays one record, and does not allow me to

  • When enlarging windows while surfing with Safari, windows open but empty?

    I am new to Macs in general, but I am having a problem with opening the pop up type windows in places such as ebay etc. If there is an option to enlarge a picture, when it blows the picture up full size the box opens but it is blank. I tried shutting

  • Integrating leadpages with Business Catalyst Mailing lists

    I am having trouble with integrating my leadpages with my Business Catalyst account. Has anyone had this problem before? I have cleaned the code and ensured that it is supposed to link to the correct mailing list, however it won't pull together. This

  • Is it possible to save a HashMap in a Database

    Hi there, I have this method which stores some actions that have change a text in a JTextPane   private void createActionTable(JTextComponent textComponent) {         actions = new HashMap();         Action[] actionsArray = textComponent.getActions()

  • Problem facing while generating classes for mixed="true" in jaxb

    <complexType name="ANY" abstract="true"></complexType> <complexType name="BIN" abstract="true" mixed="true"> <complexContent> <extension base="tns:ANY"></extension> </complexContent> </complexType> When JAXB is generating the classes for above comple