How best to avoid ringing between preamp and counter input on AT-MIO-16?

I am trying to count pulses from a pre-amp using counter chips on the AT-MIO-16 but I am getting lots of ringing (150 MHz when I should get 1-10 Hz) even with a 50 Ohm terminator cap. Any suggestions?

Match the impeadence of
the pre-amp out,
cable,
AT-MIO-16 input.
Prefect matching gives zero ringing.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

How to establish the connection between crm and r/3

Hi,
Sorry for posting this question in this forum, i did not find any CRM forums.My question is,How to establish the connection between CRM and R/3...in my office i installed standard alone CRM system,but it is not talking to R/3.
Could any one tell me where to find adapters and plugins for this.
Thanks in advance.
Ajey

Hello Ajey,
in the case you mean the connection between R/3 and SAP CRM you should read the Best Practice Guides:
B01: CRM Generation
C71: CRM Connectivity
B09: CRM Replication
from http://help.sap.com/bp_crmv240/index.htm. There is a CRM Forum at http://www.sap.com/community/ and also at http://www.sapfans.com/.
Regards
Gregor

How best we can use the Rollback and RollbackAlways mechanism in Visual Studio Release Management Template

Hello All,
We need a clarification on Rollback and RollbackAlways in Release template.
We checked a scenario for Rollback and RollbackAlways:
In Release Template, we have the first activity as “Configure Application Pool” and then followed by a rollback action of “Create Application Pool”
and “Create Web Site” then followed by "Code Deployment" via TFS build.
We tested with 2 scenario’s:
With App Pool and Web Site already existing: when triggered the build, configure
app pool succeeded, then Rollback action was skipped (as previous action was successful), finally deploy the code executed (code deployed) and build got succeeded.
Deleted App Pool and Web Site: when triggered the build, configure app pool failed (as no app pool existed), Rollback action executed (as previous action failed) – created app pool and web site then finally
deploy the code executed (code deployed)
But build failed (Error: Configure app pool action failed).
Ideally the build should succeed as the roll back action got executed and code deployed successfully.
Please correct us if our understanding is wrong.
Also, Kindly let us know how best we can use the Rollback and RollbackAlways mechanism in Release Management
Looking forward for your positive response.
Thanks in advance.
Regards,

Hi Shashank,
Rollback Always runs if any of the actions in the template failed. Rollback will run if action just above rollback fails or if any of the actions below the Rollback fails.
Article here (http://www.incyclesoftware.com/2014/03/understanding-rollbacks-release-management/) clearly explains how Rollback and Rollback
Always work.
I think you come across this issue since you are using build to do the "code deployment" action. You should use the release template to do that.
As far as I know you cannot use Rollback to achieve condition check (App pool exist in your case) action.
For this you can create your own Power Shell component (which checks if the app pool exist and is not create it) and add it as a tool in RM server (RM Server Inventory).
Another option is you can follow the workaround in below thread "Answer" quoted below. That is execute Remove app pool regardless if it exist or not (which does not fail) and then create app pool.
I was able to get it working by removing the app pool which does not fail if it doesn't exist. Removing then creating seems the long way around but it works.
Flow:
Remove Application Pool
Create Application Pool
https://social.msdn.microsoft.com/Forums/en-US/43bf21c8-e233-4e58-a5a8-2592b78bc466/vs-2013-release-management-create-application-pool-fails-if-it-already-exists?forum=tfsbuild
Cheers!
Chaminda

How can I avoid duplicates on contacts and how do I get contacts created on iPhone/ipad synchronized on my mac? so far it doesn't work correctly, just sometimes. same for icalendar

how can I avoid duplicates on contacts and how do I get contacts created on iPhone/ipad synchronized on my mac? so far it doesn't work correctly, just sometimes. same for icalendar

On your Mac, for duplicates, switching Contacts off then back on in System Preferences > iCloud may prevent duplicates.
On the iPhone / iPad tap Settings > iCloud. Make sure Contacts and Calendars are swtiched on.
Try restarting your Mac and your iOS devices when items won't sync as they should.
To restart an iOS device: Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.

How can I transfer photographs between Revel and Photoshop (CS3)?

How can I transfer photographs between Revel and Photoshop (CS3)?
any Ideas?

Hi poetryplease,
Unfortunately, there is no Creative Cloud connection between CS3 and Revel. You can upload your images that you have edited, etc, in Photoshop from your desktop into Revel or download your Revel images to your desktop then open in Photoshop.
Glenyse

How the relation is maintained between BOm and dependencies

Hi Gurus,
Please tell me how the relation is maintained between BOm and dependencies

First you need to create object dependencies (CU01). Then these dependencies are to be assigned to BOM items in bill of material create / change mode(CS01/CS02). For this you need to select a component / BOM item and click 'Allocations' button.(Select BOM item + cntr F1)
Pls reward points if found suitable.
Thank you.
Umesh

A540 How do I switch between HDMI and PC inputs?

When I have an HDMI source plugged into the A540, I haven't been able to figure out how to switch between HDMI and PC inputs. How is this accomplished?

You can browse the other store but unless you have a credit card and billing address in the other country you will not be able to purchase.
All prices are in the local currency of that country that you are browsing.
MJ

How to create shared folder between mac and windows

how to create shared folder between mac and windows

Us ean external drive formatted FAT32 or ExFat. Both OSx and Windows can read/write to the drive and both can use the same data files as long as you have a program that can open and save these files. For example, Word running both on OSx and on Windows will be able to work with the same document on the external drive.

HT2729 How do I switch movies between sd and hd on my computer

How do I switch movies between SD and HD.

System Preferences > Display > Arrangement
Drag the white Menu bar from the main screen to the second screen.

How to find the relation between PAY_ELEMENT_TYPES_F and GL_CODE_COMBINATIO

Hi, could someone tell me how to find the relation between PAY_ELEMENT_TYPES_F and GL_CODE_COMBINATION tables
that is because as you could know PAY_ELEMENT_TYPES_F holds the definitions of elements in Oracle HRMS and i need to find the accounting code of each element.
Thanks

Hi;
Please check e-trm site for table relation,integration,explanation etc..
etrm.oracle.com/
Regard
Helios

How to switch between primary and secondary input ...

Hey guys ,
I have Nokia 6700 Slide
I have to write SMS's in two languages so I need to switch between secondary and primary input language put the way I know is boring and inefficient so that if anybody know a shortcut that help to switch between the primary and the secondary input language that will be awesome .
thanks

when writing text ,To change the
writing language, select Options >
Input options > Writing language
or refer to page 28
http://www.google.ie/url?sa=t&source=web&cd=2&ved=0CB8QFjAB&url=http%3A%2F%2Fnds1.nokia.com%2Ffiles%...
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

DIFFERENCE BETWEEN SUM AND COUNT IN SQL

DIFFERENCE BETWEEN SUM AND COUNT IN SQL
WHAT IS THE DIFFERENCE VERIFY IN DETAIL/

21031980, I suggest you upgrade your computer sothat you can access google.
lol.
wtfpwnd.Google is also helpful for understanding the strange
acronyms that show up around here lately (yes, I did
find and understand this one). :-)Haha, sorry!
It's the inner-gamer in me rearing its ugly head...
:-)

Best practice for migrating between environments and versions?

Hi to all,
we've got a full suite of solutions custom developed in SAP BPC 7.0, SP 7. We'd like to understand if
- there are best practice in order to copy this applications from an environment to another environment (another client)
- there are best practice in case the client has got a newer version of SAP BPC (they should install the 7.5, while we're still stucked with the 7.0).
Thank you very much
Daniele

Hi Daniele
I am not entirely sure, what you are asking, Please could you provide additional information.
Are you looking for best practice recommendations for Governance, for example: Change transports between DEV, QA and PRD in BPC 7.0?
What is the best method? Server Manager backup and restore, etc ?
And
Best Practice recommendations on how to upgrade to a different version of BPC, for example: Upgrading from BPC 7.0 to 7.5 or 10.0 ?
Kind Regards
Daniel

How do you file share between mac and pc?

i need to know how one can share files between a mac and a pc. my MBP is running os x 10.5.2 and my PC is running vista.
thanks!

Mac/Windows Networking in Leopard
The following articles outline how to set up networking between Macs using Leopard and Windows PCs:
Setting up a Windows computer to share files with Mac users
Setting up a Mac computer to share files with Windows users
Sharing with Windows computers
If you can’t connect to your Mac from a Windows computer
Sharing your computer with others on your network
More information is also available by selecting Mac Help from the Finder's Help menu and searching for the relevant terms such as "windows", "networking", "sharing", etc.
Also read:
Simple guide to Leopard/Windows Home Networking
Written by Intercepter121 and originally posted on the Apple Discussions here.
If your network complies to the minimum requirements described below you should be able to share resources without any need to enter commands in the terminal to modify configuration files in your mac.
Requirements
1. A decent router
2. Mac Os x 10.5.1 installed on your macs
3. Windows XP or Vista
4. Number of network devices <10
5. Some network printers or drives (NAS)
6. A decent ISP offering a good DNS service
<u>General Settings
If your router offers DHCP and any of the device has power saving features there is a risk that the IP addresses are renewed. This can be problematic as the devices keep changing IP addresses. As this is your network is strongly recommended to reserve IP addresses to the MAC (Machine Address Code) of the various devices so that they can power on and off and still keep the same IP.This simple suggestion will greatly improve the browsing of the local network.
Accessing Windows Resources from Leopard with no authentication
Windows
1. Check the settings of the PC and ensure the IP addresses on the local LAN are trusted
2. Activate sharing on the desired devices ensuring the shares are read and write. If you use Vista ensure password protected sharing is disabled.
3. Try to access the windows share from another windows computer if available to confirm no authentication is required
MAC
1. Go into system preferences->security-Firewall check that the setting is not on allow only essential services. Recommended settings is allow access to specific
2. Go back into system preferences network. On the tab location click edit locations. Duplicate Automatic and call the new location Home. Now select the Home location and go into Advanced-WINS. In the workgroup field enter the same value that is on the other windows computers for example HOME. Now press enter then go back to the main screen. Select Edit locations and delete the location automatic. Now edit your location Home and rename it Automatic. This workaround is a leopard bug described here.
3. Give 5 minutes to allow all the other machines to broadcast their IP address and the other computers should appear on the left side of your finder window. You can now select the shares you want to connect. As no authentication is active if you are prompted with a user name just press OK.
The procedure to access a NAS is the same as above, just ensure permissions are set to files are read/write for anyone to avoid confusion.
NOTE: There is no need to activate SMB sharing if you don't want to allow the PC to read folders on your MAC
Troubleshooting
After you have followed all the steps you don't see any windows PC.
Identify the IP address of the machine you want to connect. In finder select Option+K and enter SMB://IPADDRESS. If you can connect you have a name resolution problem. Go into your router configuration and ensure that the option DNS assigned by ISP is selected and you don't have services like Open DNS in use and fixed IP addresses in that field. Apply the changes and reboot the router. You should start seeing windows PC in finder shortly after.
Your ISP DNS service is poor and you must use Open DNS or similar
If you are forced to use services like open dns you have the risk that the router propagates the DNS servers to your machines. As the implementation of SAMBA in Leopard effectively blocks the MAC to be a master browser for performance reasons you end in a situation in which tiger machines connect and leopard ones don't see a single share. Let's fix it.
1. Go into System Preferences->Network then advanced DNS if you see here the IP addresses of the open dns servers this is the case. Unfortunately you will be forced to change the hosts file.
2.Ensure you have reserved IP addresses to all your machines so that they always get the same IP.
3. Now login into your mac as administrator and go into utilities=>terminal.
4. Issue the following command sudo pico /etc/hosts
5. Now scroll down and enter all the IP addresses and computer names of any device you want to browse
6. Reboot your MAC
The windows devices will now appear in finder and you will be able to connect with Option+K.
You cannot access shares even entering the IP address
You have not reserved IP addresses to each machine. Go into your router LAN set up and make sure that is the case.
Accessing Leopard resources from Windows
1. Go into system preferences->security-Firewall check that the setting is not on allow only essential services. Recommended settings is allow access to specific
2. Go into System preferences->accounts and click on Guest flag the option Enable guest account to access shared folders
3. Now into System preferences->sharing select file sharing and then options here flag SMB and select the user that has to be logged into the computer when the share has to be accessed. Ensure that the folder you want to share has read/write or whatever permissions you like it to have set for Everyone
You should now be able to see your MAC in the windows network resources and access the shared folder with a double click without any password request.
Troubleshooting
You don't see any MACs from Windows
Check the firewall settings at the start of this post. Then go back to the Network configuration hit advanced and then TCPIP check is using DHCP and not a fixed address. Then check the sharing is set as above with SMB clicked. If SMB is not set you won't even see your mac from windows.
You see the MAC and the shared folders but you can't read or write on it
Ensure you have set the guest account to access shared folders. Then check on the sharing preferences that there is at least one folder with read permission for everyone. The classic case here is Dropbox that leopard sets as read and write for the user of the MAC but no access for other users. You try to click on drop box and receive an error but when you actually try to write a file you can do it. Check the permissions on the subfolders of the share as those permissions will prevail on the home shared folders
FAQ
You may want to do more complicated things, but first ensure you can actually share files without security in place so you can identify the root cause of your possible problems
I want to password protect my windows shares: once you have done the relative set up in windows vista and ensured you can connect from another windows machine you will need to use user name and password of the Vista user to connect.
I want to password protect my MAC shared folders: Go into user account and disable guest access to shared folders is no shared folder has to be accessed without password otherwise leave it checked. Create a new user for sharing (better than giving away your password) so that this user only accesses the folders you want to share. In System preferences network select file sharing SMB and flag only the new user you have defined. Then go back to the folder section and set the permissions you like on the folder you want to share for this newly defined user.
Good Luck

Best Practice - Outer Join between Fact and Dim table

Hi Gurus,
Need some advice on the below scenario
I have an OOTB subject area and we have around 50-60 reports based on it. The related subject area Fact and Dim1 table are having inner join.
Now I have a scenario for one report where outer join has to be implemented between Fact and Dim1. Here I am against changing the OOTB subject area join as the outer join will impact the performance of other 50-60 reports.
Can anyone provide any inputs on what is the best way to handle this scenario?
Thanks

Ok. I tried this:
Driving table : Fact, Left outer join -- didnt work.
Driving table: Dimension D left outer join -- didnt work either
In either the case, I see physical query as D left outer Join on Fact F. and omitting the rows.
And then I tried this -
Driving table: Fact, RIght outer join.
Now, this is giving me error:
Sybase][ODBC Driver]Internal Error. [nQSError: 16001] ODBC error state: 00000 code: 30128 message: [Sybase][ODBC Driver]Data overflow. Increase specified column size or buffer size. [nQSError: 16011] ODBC error occurred while executing SQLExtendedFetch to retrieve the results of a SQL statement. (HY000)
I checked all columns, everything matched with database table type and size.
I am pulling Fact.account number, Dimension.account name, Fact.Measures. I am seeing this error each time I pull Fact.Account number.

How best to avoid ringing between preamp and counter input on AT-MIO-16?

Similar Messages

Maybe you are looking for