How best to *BATCH* process MP3s for sound improvement using X-Fi extreme Music.

I have a shiny new X-Fi extreme music.
Does anyone have ideas on the best way to *batch* process a large selection of (16 bit 44.1) MP3 files?
A lot is made, in the X-Fi advertising, on the varied abilities to improve the sound of MP3 files. I have a large selection of play-a-long MP3s generated from old sources, and additionally converted to single channel mono. (i.e. I have extracted the LEFT channel and created a mono MP3 from that).
I would like to improve the sound of these file. I use them for play-a-long, so tonal closeness to the original is *not* important. I just want to be sure I can hear the basist (and drummer) OK - i.e. I want to emphasize their sound and disregard the frequencies in the human-voice range.
Sometime, I play these files using the PC equipped with the X-Fi extreme, but sometimes on my MP3 player.
Does creative supply SW to achieve this batch processing, or does anybody know of third party SW that can help. Their seems to be a lot of sound improvement SW out there, but it is targeted towards dealing with LP vinyl problems, and usually doesn't do batch very well.
Thanks for your consideration,
Matt

Hi?I have got some problems with my X-fi Xtreme music on Vista 32bit too. I use speaker Inspire T6060 5. chanel but there is no sound from center speak and sub woofer.Although I had change sound setting in window and creative console to 5. sound chanel but it still no sound from them.
?And I want to know about how?do I?use THX in VISTA?. Where can I download? Because I cannot use the driver that came with the CD (Xp version). I would like to say 'sorry' to all who read this, because my?English is not good. :manhappy:

Similar Messages

  • How do I batch edit potos for contrast,sharpness,etc or permanently change the settings?

    How do I batch edit photos for contrast,sharpness,etc or permanently change those settings?

    There a 3rd party application, iPhoto Batch Enhancer, that can batch enhance, change contrast or crop. That's all. 
    However, once you establish the adjustments to one photo you can copy it via the Edit menu:
    and then move to the next photo with the forward arrow and paste those adjustments in the next photo.
    OT

  • Batch processing "save for web" color shift problem

    In Illustrator CS3, when batch processing "save for web and devices," there is a dramatic color shift in resulting files.
    Is there a workaround for this problem?
    Thanks!
    Karen.

    Make sure the color mode of your documents is RGB (not CMYK) and that your workspace is sRGB.

  • How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

    How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

    Hi,
    First go thourh the FM import export parameters list.
    Try to create an internal table of type INRI-NRRANGENR for number ranges.
    We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
    Try to create the ncessary ones using this FM.
    In the Exit, EXIT_SAPMM06E_001,
    the Export parameters are-
    EKKO-EBELN- the PO ios created with in that specified range
    Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
    Try to code this in the Include provded and keep Breakpint and check the PO number generated.
    Reply if u need more help on this.
    Reward if helpful.
    Best Wishes,
    Chandralekha

  • Pop Up blocker exceptions are not saved in the browser for use, the next time the PC reboots. How do you save these exceptions for long term use?

    Pop Up blocker exceptions are not saved in the browser for use, the next time the PC reboots. How do you save these exceptions for long term use?

    In case you are using "Clear history when Firefox closes":
    *do not clear the Site Preferences
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
    *https://support.mozilla.org/kb/remove-browsing-search-and-download-history
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
    If you have software like Advanced SystemCare (Surfing Protection feature) that might reset some files to older versions to protect these files against changes then check the settings or uninstall this software.

  • How do I have my phone Make sound when using "Find my phone" app

    How do I have my iPhone make sound when using "find my. Phon" app?

    You can have the app send you an email when it is found, and you can set your email tone under settings-> sounds

  • How do i get a colormap for intens graph using basic imaq

    This is a follow up to
    http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000B58D0000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_TIER_0=0&USEARCHCONTEXT_TIER_S=0&USEARCHCONTEXT_QUESTION_0=how+do+i+get+a+colormap+for+intens+graph+using+basic+imaq&USEARCHCONTEXT_QUESTION_S=0
    where I asked for help getting a colormap for saving an image as a jpeg. Now, I have decided that I would like to use an intensity graph for my display of the RGB image that I have captured using my pci-1411 frame grabber board. How do I get the right colormap for the intensity graph display? I do not have vision and do not intend to purchase it. I am using the basic IMAQ package.
    jc
    Mac 10.4
    LV7.1
    CLD

    Dear Sir, usually the intensity graph will help you with monochrome images, since they have a one color intensity. If you want more colors you will be able to get up to 256, and not true color (24 bit). You might want to use the Picture Control instead or a Child Window approach, please look in your Help menu, 'Search IMAQ Examples...' and then browse for IMAQ examples and choose the ones that are for Picture Control. For the Child Window look in our website for an example called 'IMAQ Display Without IMAQ Vision'.
    Good luck!
    Nestor.
    Nestor
    National Instruments

  • Is there a limit to how many pages i can have for one website using muse/business catalyst?

    is there a limit to how many pages i can have for one website using muse/business catalyst?

    Thank you. I've been searching everywhere and I couldn't find anything the mentioned it. I appreciate the feedback!

  • How to find out the script for the table using SQL

    Hi,
    Could any one tell me that how to find out the script for the table using SQL.
    Thanks,
    kamal

    Kamal,
    You can find the SQL query in Advanced tab of Answers
    Thanks,
    Balaa...

  • How should a batch process for text alignment be configured in PDF

    Hi,
    Using Adobe Photoshop CS5 extended, how can I configure a batch process to align the text on about 700 single page pdfs (of text)?  The text consists of four tables of numbers and one page number per page.
    Thanks.

    Thanks.  I didn't think so.
    I thought it was a Photoshop question (since I know how to do it one page at a time manually in Photoshop) and I did post the question in the Photoshop Forum.  Apparently it's not possible to batch the process in Photoshop, so someone moved the question to the Acrobat Forum.

  • How to perform batch processing or write javascripts and execute in Acrobat 9 standard

    I would like to add file name as water mark to bottom of each page of a file. I need to do this for 100s of pdf files. Can anyone please let me know how this can be achieved in batch processing or using javascripts in Acrobat 9 standard

    You can post a feature request:
    http://forums.adobe.com/community/acrobat/acrobat_feature_request

  • Bridge batch processing script for Photoshop stops after ten mins

    I have a javacript to help batch process collections of images in Bridge by sending them (in layers) to Photoshop CS5. It works perfectly, except it stops running after about ten minutes (around 6-10 images) so that I have to keep restarting the script. This behaviour has only started since the script was installed in the Bridge startup folder so that it could be started from the (right click) menu. The script does not seem to time out when run via ExtendToolkit.
    Does anyone know why this is happening?

    Thanks again Paul. Can I ask you where the best place to insert that would be? The script is below - I'm sure you'll recognise it :6).
    I've also been wondering if its possible to alter the script so that the files in bridge are opened in PS as Smart Objects (in layers)? There is a script 'Open as Smart Object in Layers' but I haven't been able integrate it into your fantastic script.
    #target bridge
    if( BridgeTalk.appName == "bridge" ) {
    processDocs = new MenuElement("command", "Process selected docs", "at the end of Thumbnail");
    processDocs.onSelect = function () {
    var sels = app.document.selections;
    var selectedFiles = new Array();
    for(var a in sels){
        selectedFiles.push(sels[a].spec);
          if(selectedFiles.length> 1){
               var bt = new BridgeTalk;
               bt.target = "photoshop";
               var myScript = ("var ftn = " + psRemote.toSource() + "; ftn("+selectedFiles.toSource()+");");
               bt.body = myScript;
               bt.send(5);
    function psRemote(selectedFiles){
    app.bringToFront();
    for(var f in selectedFiles){
    var thisDoc = open(File(selectedFiles[f]));
    /*run an action if required */
    /* app.doAction("atn", "atnSet"); */
    /*script listener code goes here...
      You will need to remove the //===== lines or the script will fail 
    /* end script listener code */
          var saveFile = new File('~/desktop/'+(new Date().getTime().toString())+'.psd');
          app.activeDocument.saveAs(saveFile);
          app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);

  • Batch processing audio for separate video clips?

    Hi there, new to the forums. I have roughly 100 separate video clips that either I have edited and exported out of PPro or collected from other outside sources. The video clips were recorded in a wide range of environments, producing widely varied audio levels and sound quality. The videos are for a blog.
    I am hoping to create a batch process preset in Premiere Pro or Audition to normalize the audio in all of the video clips. My goal is to have the audio play back at the same volume level in all of them without having to edit the audio individually in each clip. I have been searching the forums for a while for help with a batch process solution like this. Running CS6 so have full access to all Adobe apps.
    I have played around with running the clip audio through batch processing in Adobe Audition CS6. Haven't had any success thus far -- the audio doesn't save within the same video file it was pulled into Audition from. I really would like to normalize the audio without having to re-import/-re-export each separate video.
    PPro group might be the wrong place to start, but figured I would start here. Is there a missing manual out there for doing something that seems relatively simple?

    Premiere Pro can't do this.  If Audition can't either, then you're probably stuck doing it manually.  Or at least, using non-Adobe software.  Possibly VirtualDub, depending on your source media.

  • How best do I leave Gmail for Mail?

    I've decided I want to take the plunge and leave Gmail for Mail, using my iCloud account. Why? I've lost trust in Google (incl. their search bias, how they handle my privacy, and how they treat the end-user as a comodity to sell rather than a customer to serve). I'd love advice on the best way to swap over. I've done a bit of researching and can't seem to nail the answers to my questions. Your help + advice on any of the items below would be much appreciated. And if you think there's a better way I should be asking the question, please let me know.
    Here's what I'm looking for especially:
    I use Gmail's labels a lot. What's the best way to get the same effect in Mail? Smart folders? (I do wish smart folders synced to iCloud.)
    I have a lot of Gmail labels. What's the best way to export from Gmail without getting oodles of duplicates? Forwarding folder by folder would be time consuming + lossy, and stripping the labels would be counterproductive. Are those my only options?
    I use a lot of Gmail filters. Mail rules seem even better, but is there any way to automate transfering the filters to Mail?
    I use Gmail 'send mail as' with a collection of non-gmail addresses (from my domains). Is there any way to use my iCloud account to send from a non-iCloud address? Or, is my only option to sign up with a different webmail service in order to send from my alternate addresses in Mail? 
    I have my own set of pre-defined Gmail keyboard shortcuts. Do I just need to tough it out and learn the Mail shortcuts, or is there a good, free/inexpensive app for adding shortcuts to Mail? And no, I don't mean through SysPrefs (I know how to do that ). I mean Gmail style single-letter shortcuts, like 'r' for reply.
    Tips for converting Gmail Contacts to Address Book.
    If you've made the switch, I'd also be interested to hear your experience! I'd really like to get Mail up and running sooner and rid myself of Google.
    Papa Bear

    1: Smart folders won't sync between devices. But you can create regular mailbox folders under the icloud imap folder or at the icloud website which will stay synced.
    2: The best way I see to do the labels is to create the gmail account in Mail. Set it to show those labels in imap in the labels setting section at the gmail website. All your gmail folders will appear under gmail's imap folder in Mail's sidebar. Then you will have options to export or just move the messages from one mailbox to another. I think I would just create a new mailbox under iCloud, then select all the messages from one gmail folder and right click to move the messages to the iCloud folder. Seems it would be the easiest way.
    3: I don't think it is possible to transfer your rules from gmail to Mail. Rules should be very carefully constructed in Mail paying much consideration to the order they are placed. Simplify it as best you can and test it. In Mail, rules only will apply to incoming messages which may be different than what gmail does.
    4: iCloud does not have the option to send other email addresses and retain their identity like gmail does. Best I can say on that is to create the accounts of the other addresses in Mail seperately with their own SMTP servers to send from.
    5: No comment.
    6:You can go to the gmail website and export your contacts.
    Or, open up the AB on the computer and go to preferences. Open the Accounts tab. Select On My Mac in the list and check the box to sync Google contacts. Put your google sign in and password. Your Google contacts should be created on the computer. You can then select all the contacts in google and drag them to iCloud to add them. Once done, deselect the google contact syncing.

  • How can I batch process files to change name and extention in the latest photoshop cc ?

    Hi,
    The batch process function has changed design recently and I cannot get it to change file names in photoshop cc 2014.
    I keep getting new layers in the first file to open instead of a renamed batch.
    I would also like to convert files to jpeg and resize ( at the same time ? )
    thank you for help in advance,
    christos

    Can't help you with CC, but you cannot change files types by merely changing the extension, regardless of program or version.

Maybe you are looking for