How business transation data,opening balances are uploaded through lsmw?

hi,
please tel me hoe to upload the open balances,business transation data of the vendor,customer and gl account through lsmw? along with that please explain the uploading theough bdc.........
i am eagerly waiting for ur answer...............please let me know asap.
with regards,
prasad.

Hi,
As all the balances can be uploaded through FB01,Create a document type by for upload set all the transaction allowed in document type.
Firstly create a LSMW for FB01 posting a document so that we will know what all the fields need to be captured.
Then in the same format create a XL template with necessary required fields and fill the same with data.
Asset master data also can be uploaded through FB01 by removing the reconcilation field in OAMK change the reconcilation control and upload the balance in FB01 and again in OAMK change the control to reconcilation.
or through OASV also you can upload.
Edited by: santosh kumar on Feb 2, 2012 10:42 AM

Similar Messages

How to query the opening balance for an specific account for an spec. date

Hi all,
for my user query I need to calculate the opening balance for an cash account for an specific date.
Any ideas, how can I do this?
Or may be you know a field in an SBO table that already contains information I need...
Best Regards,
Inna

Hi Inna,
to find the opening balance for an account or a business partner, please see SAP Note [1114253|https://service.sap.com/sap/support/notes/1114253] :
Symptom
How to find the opening balance of a business partner or G/L account.
Other terms
Account, customer, supplier, vendor, creditor, debitor, start, initial, first, opening balance, business partner, G/L, SAP Business One
Reason and Prerequisites
Consulting
Solution
There are several possible approaches:
Approach 1 - Business Partner Opening Balance:
1. Go to Business Partners -> Business Partner Master Data -> find the Business Partner
2. Click on the orange link arrow next to the field 'Account Balance' in the header region of the window.
3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
4. Click on the button 'Refresh'.
5. Find 'OB' in the column 'Origin', this is the opening balance journal entry.
Approach 2 - Business Partner Opening Balance:
1. Go to Business Partners -> Business Partner Master Data.
2. Click on the orange link arrow next to the field 'Account Balance' in the header region of the window.
3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
4. Click on the button 'Refresh'.
5. Double click on the column header 'Posting Date' to find the earliest transaction on the business partner account. This transaction could be opening balance, verify this with the company accountant.
Approach 3 - G/L Account Opening Balance:
1. Go to Financials -> Chart of Accounts -> click on the account name once.
2. Click on the orange link arrow next to the field 'Balance'.
3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
4. Click on the button 'Refresh'.
5. Find 'OB' in the column 'Origin', this is the opening balance journal entry.
Approach 4 - Business Partner and/or G/L Account Opening Balance:
1. If using SAP Business One 2005 SP01 or earlier, go to Reports -> Query Generator -> click on 'Execute'.
2. If using SAP Business One 2007 or later, go to Tools -> Queries -> Query Generator -> click on 'Execute'.
3. Ignore the red system message in the bottom of the screen.
4. Click on the pencil icon in the top left of the window, the field with 'SELECT *' will change colour to white, then yellow when activated by clicking in the field.
5. Copy the query below:
SELECT T0.[TransId], T0.[Debit], T0.[Credit] , T0.[CreatedBy], T0.[TransType] FROM [dbo].[JDT1] T0 WHERE T0.[TransType] = '-2' and T0.[ShortName] = '[%1]'
6. Click on 'Save' and give the query an appropriate name and select the appropriate category.
7. Click on 'Execute'.
8. Click on 'Existing Values'.
9. Select the G/L account or the Business Partner name from the list and click on 'OK'.
10. The system message 'Records retrieved by this query #' (# = number of records) will pop up. Click on 'OK'.
All the best,
Kerstin

I need to find out how much wifi data my apps are using. I have a very limited amount of wifi data, and I am exceeding my monthly allowance. Apparently, even apps I think are not open are sending/receiving data through the wifi and using up my allowance.

I need to find out how much wifi data my apps are using. I am on a very limited amount of WiFi data each month, which I am regularly exceeding. I have been told to work out which of my apps is using the data. Also, I think I have closed an app by double clicking the home button, then swiping the app up - is this the way to close it, or will it still be sending/receiving data?

Go into your Settings : General : and turn off background refresh for your apps. In Settings : Mail turn Fetch new data to OFF and Load Remote Images to OFF. This will mean that Mail will only check for messages when you actually use it, and all your advertising junk mail won't have all the images in it.
Turn off push notifications every chance you get.
Make sure you are actually quitting apps: to quit apps press the Home button twice and you should see a bunch of smaller screen images for every open app. To quit the app swipe from the screen image (not the icon) upward off the top of the iPad. You can swipe left and right to see more open apps, but there must be no left-right movement on the screen when you swipe upward to close the app.
Turn off your internet connection when you do not need it. The easiest way to do this is to swipe up from the bottom of you screen to get the control centre, and then touch the airplane to turn on airplane mode. You can repeat this sequence to turn it back on again when you need it. Most especially turn airplane mode on whenever you are sleeping your iPad for long periods. This will save battery life too. OR actually turn your iPad off - which means holding the power key down for several seconds until the red swipe bar appears, and then swipe to turn it off. If you go this route, note that it will take longer to turn on then it takes to wake from sleep.

How to calculate Beginning , Current & To date opening Balances

Hi to all
Anybody know that How to calculate Beginning , Current & To date opening Balances in Oracle Payable
Thanks
Zulqarnain

sorry igonore above one
i don't want last day of the month
i want last working day of the current month
please solve this
urgent

Business Partner's Opening Balance Bill Wise

Hi Experts,
We are planning to migrate the Opening balances of Business Partners with Last Year's open transactions reference such that the clients could be able to adjust the payments bill wise .
Is there any way is B1 to transfer the Business Partner's opening balances Bill wise. We don't want to migrate the open transactions as many items codes at bill time are changed now. We are interested in just having the bill wise bifurcation opening balances .
Thanks and Regards,
Pooja Singh.

Hi Pooja,
Hope u r uploading the balances via Opening balance offset account.
Thru A/P service invoices instead of the relevant expenditure account please link the above opening balance offset account and post the billwise openings. asusual choose the relevant parties.
In the invoice ref field give the references of invoices also. that will helpful at the time of payment to that respective vendor.
But you should double ensure that you r having Sundry Creditors - Breakup as Party wise and again bill wise for the parties.
Please dont pass as a JV for bill wise opening balances since you cant make part payments at the time of payment.
So, use the A/P Invoices window for the same. Under that pick the service invoice option even for material invoices.
p.s. if opening balances are 2009-10 create a period as 2008-09.

How to get a opening balance in fbl1n

how to get a opening balance in fbl1n as i copied it into zreport,
plz help
Moderator message : Spec dumping not allowed, thread locked.
Edited by: Vinod Kumar on Dec 1, 2011 3:07 PM

how to get a opening balance in fbl1n as i copied it into zreport,
plz help
Moderator message : Spec dumping not allowed, thread locked.
Edited by: Vinod Kumar on Dec 1, 2011 3:07 PM

Release Strategy Characteristic Upload through LSMW.

Release Strategy Characteristic Upload through LSMW.
Introduction:
In case of Purchase order, we need to maintain Release Strategy each year. This is due to organizational changes. Due to huge organization, this is around one week activity for us. Reason, we need to maintain characteristics for around 300 different release strategies. Since, we can't transport "Characteristics" from one system to other, we need to maintain them in Quality as well as in Production system.
Issue: We tried to use option of LSMW to maintain these "Characteristics". But, system is giving error as "Logical Path is not available".
Question: Who is responsible to create this "Logical Path" and where it can be done?

Hi,
I think you moved LSMW from test to production and this might be happening due to this fact. Please redo steps in LSMW for:
Specify Files
Assign Files
Read Data
Create completely new paths, and allow system to recreate (you need the right authorization). This might help I hope.
Regards,
Tomek

How to get the opening balances for lessthan selected date in cubes.

Hi All,
my task is to get the opening balances for the selected date.
Ex: If I select date say 31-1-2013, I should get the sum of values which are less than the selected date.
in sql:
select sum(balance) from banktrans where banktrans.transdate < 31-1-2013;
BankTable                            BankTrans
BankId                              BankId
                                       balance
                                        transdate
BankTable (records):
SCB
BankTrans(records):
a) SCB, 15000, 10-02-2013
b) SCB, 20000, 31-01-2014
c) SCB, 50000, 21-09-2012
If I select date as 31-01-2014, I should get the value as 65000
If I select date as 10-02-2013, I should get the value as 50000
Date will be dynamic selection from years months days hirearchy ( time dimension)
How can i achieve this?
any help is much appreciated.
Thanks,
Rakesh

Dear David,
I've tried the below with static date but i'm not getting the values which are sum of less than the given date.
I've given 1st jan 2013 as static date and I need to get the sum of values which are less than the 1st jan date.
CREATE
MEMBER
CURRENTCUBE.[Measures].[OPENBALANCE]
AS
Sum({Null:[Time].[Years
Quarters Months Weeks Days].[Days].&[2013-01-01T00:00:00]},[Measures].[AmountCur]]),
FORMAT_STRING
= "Standard",
VISIBLE
= 1
can you plz check the above once and guide me.
Thankyou,
Rakesh

Data Migration Opening Balances are not updating in the Report F.08

Hi,
We have uploaded the GL balances in 2008 for the year 2007. But they are not updating in the F.08 report when i executed for 2008.
Why they are not updating in the report. In which table can i check the Data migration values in the system?
Thansk
Kishore

Hi We have uploaded all the values in 2008 with 2008 date. fiscal year is K4.
F.08 Report for the year 2008 is showing only 2008 accumulated values. But not showing the Opening balances which we have uploaded in 2008 for the before years like 2007.
Why it is showing like that?
Thansk
kishore

How to read .dat files that are hidden?

Is it possible to read .dat files that are set to hidden? 'cause what i did was i created a .dat file and set its attributes to hidden and my Read file code cannot read hidden files.
here's my Read file code:
Scanner read=new Scanner(FileReader("C:\password.dat"));
and another thing, how do you Write a .dat file that is hidden too? 'cause my password.dat file needs to be updated.
here's my Write file code:
PrintWriter write=new PrintWriter("C:\password.dat");
thank for the help.

There should not be any problems opening up hidden files. Your problem is probably elsewhere (for example, you didn't escape the backslash, so what you posted is not your code).

How to DTW Stock Opening Balance

Dear friends,
How to DTW the stock opening Balance ?
I have more the 200 items and it is impossible for me to input manually in module Stock Management->Stock Transaction ->Stock Opening Balance,Stock Taking,and stock posting.
Can i DTW via good receipt or Stock posting in DTW application ?
Thanks in advance
Regards
Jia Shun

Hi Jia Shun
Yes you can import your 200 items via DTW.
Check this below path in your server you can find templates how to import via DTW
Program Files\SAP\Data Transfer Workbench\Templates\Data preparation examples\10. Testcase1_Test Data for Import function\Inventory\Inventory Transactions\Goods Receipt
Regards
Balaji

Trail Balance opening balances are not matching with previous FY clsng baln

Hi,
We have done GL Balances carry forward to 2009 F.Y, here GL code 1042600002 carry forwarded with 'Zero' balance and we have run the Trail balance sheet as on 31.03.2009 in T.Code ALR87012310
Here also it is showing Zero balance for respective GL.But when we run Trail balance as on 30.04.2009 with Fiscal year 2009 for 1st period the system is showing beganing balance Rs 38213.00
Why is system showing beganing balance? even we checkd up with T.codes FBL3N and FS10N there is also no closing balance.
Plz advise me how to proceed in this case
We are unable to analyse the sytem behaviour. Could you please suggest us the solutiion.
Thanks,
Saisri

Hi,
Thank you so much
We have carry forwarded GL balances in F.16 successfully now the problem is one GL balance has been forwarded with Zero balance but when we run the trail balance sheet (S_ALR_87012310 or F.08) as on 30.04.2009 with FY 2009 for period 1, the system is being shown opening balance.
Plz provide me possible solution
Thanks,
Saisri

How to see data being downloaded and uploaded by Mac?

hey guys, i just saw a screenshot of a Lion desktop which had the user's memory usage, data being downloaded and uploaded and CPU usage at the top right near the clock. i was just wondering how i could get this on my desktop.
thanks

Yes it is is like a small istat..Same developers,same website,i see you didn't check muck ...
Here it is anyways:
http://www.islayer.com/apps/istatnano/

How can i post opening balance b y useing DTW

Dear friends,
can any one help me out how can i transfer the opening balance's by useing DTW.
regards,
srikanth.

Dear Srikanth,
U can use the Journal Entry templates to import Opening Balances through DTW. You can use the opening balance suspense account as the off-setting account in the JE templates.
For BP opening balanaces also, u can use the same JE template. Just put the customer code in the Account description and follow the regular steps.
Regards,
Bharath

Class data upload through LSMW using BAPI

Hi All,
Plz tell me how to upload class data through LSMW using BAPI.I also need some study material on BAPI.
Bye,
Mithilesh Tiwari

its not possible with single file
for this you need to pass two files of data
1 ) Header data ZSOURCE_LIST_HEADER       Source List Header
     MATNR                          C(018)    Material Number
                                    Selection Parameter for "Import/
     WERKS                          C(004)    Plant
2) item data     ZSOURCE_LIST_ITEM         Source List Item
         MATNR                          C(018)    Material Number
         LIFNR                          C(010)    Vendor Number
         EKORG                          C(004)    Purchasing Organiz
         WERKS                          C(004)    Plant
         VDATU                          C(008)    Valid From
         BDATU                          C(008)    Valid to
for this use below LSMW IDOC method
Message Type         SRCLST                      Source List
Basic Type           SRCLST01                    Source List

How business transation data,opening balances are uploaded through lsmw?

Similar Messages

Maybe you are looking for