How can 2 people debug applications at the same time?

Hello,
We are using the NWDS to develop our portal applications.
When one developer debugs a certain program the second can't, he receives "Unable to connect to remote VM".
Is it possible to have 2 people debugging different applications at the same time?
Roy

Yes,
(but I usually define application server as a java server process, and server as physical server).
-go into configtool
-select one of the instances
-go to the Server menu and select Add server
Then you have a new server node. Select this one in the configtool and go to the servers debug tab. Set it to debugable and define a unique debug port (open command prompt and run netstat -an | find "LISTENING" to find out which ports are in use).
Regards
Dagfinn

Similar Messages

  • How to open multiple applications at the same time

    I need to open several applications at the same time: Dreamweaver, BBEdit, and Acrobat. Is there a way to smooth this process, so pressing an icon in the dock will open them all for me?

    You could create an applescript to do it.
    tell application "Dreamweaver's Full Name"
    activate
    end tell
    tell application "BBEdit's Full Name"
    activate
    end tell
    tell application "Acrobat's Full Name"
    activate
    end tell
    Replace the quoted text (leaving the quotes) with the full name of the application, and save the applescript as an application bundle, and put it in your dock.
    NOTE: You may have to put the full path to the application for it to work (I.E. /Applications/Dreamweaver.app). If you do, encase the full path in quotes.
    Good luck!
    Message was edited by: joshz

  • How far will the extreme reach and how many users can be on there at the same time?

    How far will the airport extreme reach and how many users can be on there at the same time?

    Last question first, since that is the easy one......approximately 50 (fifty) users for wireless depending on how active each user might be.
    The first question is much more difficult, as distance is not really the issue with wireless.....obstructions are the issue.
    A wireless signal can easily travel 300 feet or more with no obstructions in the signal path.
    But, a typical wall of sheetrock or wallboard in a home will absorb....on average....15-20% of the wireless signal. Brick or adobe will obviously absorb much more. A ceiling....because it is thicker....will absorb about 25-35% of the signal.
    So, if the wireless signal must pass through several walls and a ceiling, there won't be much, if any, of the signal left....even though the distance that the signal travels is not great...for example, 20-25 feet.
    Other wireless networks around you at the neighbors can also affect the relative strength of the wireless signal.
    The bottom line....locate the AirPort Extreme where wireless devices will receive a signal with the least amount of obstructions in the signal path. Your actual performance cannot be predicted in advance. You will not know how well the AirPort Extreme works for you until you try it out in your home.
    If you find that the signal does not reach as far as needed,  you will need to add additional "extenders", like an AirPort Express to provide more signal coverage.

  • How can I POST data within the same page if I have a A HREF -tag as input?

    How can I POST data within the same page if I have a <A HREF>-tag as input? I want the user to click on a line of text (from a database) and then some data should be posted.

    you can use like this or call javascript fuction and submit the form
    <form method=post action="/mypage">
    cnmsdesign.doc     
    </form>

  • How can i share photos on the same mac but different users?

    how can i share photos on the same mac but different users? we have different iphoto acounts and just want to be able to look under users in the finder and view another users iphoto.

    You may try moving ur librarie to the folder /Users/shared if and link it to iphoto from there
    You may locate and link libraries from arkiv-->change library in iphoto

  • I have an itunes account in Euro. I received iTunes and AppStore Gift Cards in $US. How can I use these on the same iWhatever?

    I have an itunes account in Euro. I received iTunes and AppStore Gift Cards in $US. How can I use these on the same iWhatever and keep together music/apps bought in the 2 currencies?
    Thx

    Barbara Hunt wrote:
    Would it be possible for me to download iTunes in Parallels and get the files into that and then onto my iPod?
    Yes, you can download iTunes for Windows using Parallels. If planning on making purchases here and/or authorizing already purchased tracks (from your Mac iTunes library), you are permitted to authorize five (5) computers as per iTunes Store terms of use, regardless of computing platform. No need to create a separate new iTunes Store account.
    However, judging from what you would like to do, your best bet would be to convert the WMAs to AAC/MP3 in iTunes-Windows (iTunes-Mac cannot import WMA files), and drag the files from the Parallels window to your desktop to add to the iTunes-Mac library. (as the iPod itself is currently linked to your iTunes-Mac library)
    Hope this helps,
    Steve

  • I have 2 accounts in my family and would like to purchase some of the same songs for both accounts, however when I try to purchase a duplicate song from the second account the song says play instead of purchase. How can I get some of the same songs?

    I have 2 accounts in my family and would like to purchase some of the same songs for both accounts, however when I try to purchase a duplicate song from the second account the song says play instead of purchase. How can I get some of the same songs?

    Drrhythm2 wrote:
    What's the best solution for this? I
    Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

  • HT5622 I own three Apple devices, but my iPad remained associated with my old email address and password. How can I register it with the same new email and password?

    I own three Apple devices, but my iPad remained associated with my old email address and password. How can I register it with the same new email and password?

    If you updated your existing account then try logging out of it on the iPad by tapping on the id in Settings > Store and then log back in and see if that 'refreshes' the account on the iPad. If you created a new account then any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can download updates to its apps.

  • How can I merge folder with the same name so that the content does not replace the other

    How can I merge folder with the same name so that the content does not replace the other?

    >
    That's only a good idea if the semantics of sayHello
    as defined in MyInterface suggest that a
    RemoteException could occur. If not, then you're
    designing the interface to suit the way the
    implementing classes will be written, which smells.
    :-)But in practice you can't make a call which can be handled either remotely or locally without, at some point, dealing with the RemoteException.
    Therefore either RemoteException must be part of the interface or (an this is probably more satisfactory) you don't use the remote interface directly, but MyInterface is implemented by a wrapper class which deals with the exception.

  • I want to do banners ,how can we do  when click the same button (next button)  it must show differen

    i want to do banners ,how can we do  when click the same button (next button)  it must show different images . cam any one help

    Check out my blog with samples on Edgehero.
    http://www.edgehero.com/articles/interactivity

  • Iphone 6 airdrop problem can't find or connect to my iPhone 5s to share pic, how i can fix this ? at the same time my iPhone 5s no problem with airdrop to share.

    Iphone 6 airdrop probleme can't find or connect to my iPhone 5s to share pic, how i can fix this ? at the same time my iPhone 5s no problem with airdrop to share.

    hi raz, i don't have problem how to use airdrop , but the iPhone  6 can not find other contact so i can share pic , and i have iOS 8.0.2 on both iphone.and i have the same network .
    with iPhone 5s i can share with airdrop and he find my iPhone 6 name so i share and accept pic, but from iPhone 6 i can't do the same.

  • How can i launch application from the terminal in 32-bit mode?

    how can i launch application from the terminal in 32-bit mode?
    everytime i have to check and uncheck the finder's info panel and it's really annoying, thanks!

    ''Courtesy of cor-el''
    https://support.mozilla.com/en-US/questions/823873
    Other users should note that Firefox has public release versions of 64bit only for Mac And Linux; not for Windows, yet.

  • How to support multiple users at the same time?

    Hi all,
    I have a Labview software which controls a analyzer via GPIB connector. When user A is using the software, user B has to wait until A is done. But actually, the analyzer is not very busy, when user A is using the software.
    I want user A, B, C and D can use the software at the same time. just like we can open Multiple websites at the same time.
    How can I program the software, so that the software can be open multiple times? Do you have any example?
    Thanks a lot.
    Steven
    Solved!
    Go to Solution.

    Are all the users going to be measuring the exact same thing from the same instrument?
    It would be possible to write a separate instrument server application that would handle all the direct interactions with the instrument. When one of the users needed to access the instrument, they would gain access to it through this server.
    The big, Big, BIG caveat is that each interaction with the instrument would need to be atomic. In other words each access would need to configure the instrument, initiate the reading, report the results, and then reset the instrument back to some known default value.
    As Dennis said, not a trivial process, but probably do-able...
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Re: if weblogic can serve two ports at the same time?

    That's not true. WebLogic supports a non-secure and secure listener port at the
    same time. That was one of the selling points for my organization.
    Michael Girdley wrote:
    If, you mean the same port on two different IP addresses, then the answer is
    yes.
    If, you mean two different ports on the same IP address, then the answer is
    no.
    Thanks,
    Michael
    Michael Girdley
    Product Manager, WebLogic Server & Express
    BEA Systems Inc
    fxy <[email protected]> wrote in message
    news:8fdk99$t9$[email protected]..
    <URGENT QUESTION>
    I'd like to know if weblogic can support two ports at the same time.
    thank you in advance.
    <URGENT QUESTION>

    Well, the question was really meant to see if any change was made to WL to support
    this, not because I didn't believe Michael Girdley.
    P.S., this is something Websphere 4.0 let's you do...In case this encourages someone
    to add this support.
    "Mike Reiche" <[email protected]> wrote:
    >
    If you don't believe Michael Girdley, then I don't know why you would
    believe anyone
    else. I believe the answer is still 'no'.
    Why do they 'have to be on different ports'? We block requests by URI
    - so just
    block all requests to /youradminapp/* at the firewall. Or you can block
    them at
    your Web Server. Or restrict them by user in WL.
    Mike
    you"Anil Arora" <[email protected]> wrote:
    Is it still true that WL 6.0 cannot host multiple (non-secure) HTTPports
    on one
    server? We need this capability within one JVM to allow one web application
    to
    be accessed from one port while another through a second port. Forexample,
    we
    have a application to be exposed through the firewall at port 7001.
    Then we have
    another admin application to only be accessed within the firewall. But
    they need
    to be deployed within the same JVM since they may have shared statebetween
    them.
    Thanks,
    Anil
    "Michael Girdley" <[email protected]> wrote:
    I'm sorry, to clarify my statement: I was speaking about nonsecure
    communications. Weblogic can only support one listener port at a time.
    Thanks,
    Michael
    Michael Girdley
    Product Manager, WebLogic Server & Express
    BEA Systems Inc
    Allen Akers <[email protected]> wrote in message
    news:[email protected]...
    That's not true. WebLogic supports a non-secure and secure listenerport
    at the
    same time. That was one of the selling points for my organization.
    Michael Girdley wrote:
    If, you mean the same port on two different IP addresses, then
    the
    answer is
    yes.
    If, you mean two different ports on the same IP address, then theanswer
    is
    no.
    Thanks,
    Michael
    Michael Girdley
    Product Manager, WebLogic Server & Express
    BEA Systems Inc
    fxy <[email protected]> wrote in message
    news:[email protected]...
    <URGENT QUESTION>
    I'd like to know if weblogic can support two ports at the same
    time.
    thank you in advance.
    <URGENT QUESTION>

  • MacBook Pro Freezes while using more than two applications at the same time

    Over the last two weeks my MBP has been freezing every time i use two or more applications at the same time. For e.g. my whole system freezes from time to time when i use itunes and safari at the same time. This problem never existed before and has just started recently and is really annoying. What can i do to fix it?

    Rather than re-installing Safari have you tried simply "Resetting" it (head to "Reset safari" under the "Safari" menu). It is possible that something in your user folder that supports Safari is really the cause of the problem. Re-installing Safari won't deal with this, but re-setting it can.
    In fact the first thing you should try is simply choosing "Empty cache..". If your cache files are corrupted then this in itself could explain the behaviour.
    If you choose to do the Reset first try it with just "Empty cache" and "remove all website icons" selected. This will reduce the amount that you will "lose" in the process. (Cookies, history, etc). Add in additional options if the first attempt doesn't fix it.
    Cheers
    Rod

Maybe you are looking for