How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance. Of a sledgehammer, open the device and attempt to recover your files by force!???

How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance in Brasil. Of a sledgehammer, open the device and attempt to recover your files by force!???

Heat up the bottom rubber mat with a hairdryer for 5-10 minutes to loosen the adhesive, then pull the rubber mat away from the bottom metal plate carefully.
Then use a screwdriver to remove the 10-12 screws to open up the case.

Similar Messages

  • How can I move (copy) my Time Capsule date to a new 2T hard drive and then wipe the TC and start as a new (clean) Time MACHINE backup?

    How can I move (copy) my Time Capsule date to a new 2T hard drive and then wipe the TC and start as a new (clean) Time MACHINE backup?

    Just use the archive utility on the disk page of the airport utility manual setup..
    If you have lion and v6 airport utility.. it missed out. On lots of things.
    Download and install the real.. UTILITY
    5.6 http://support.apple.com/kb/DL1482

  • How can i clear a full time capsule and start again

    how can i clear a full time capsule and start again

    Open the airport utility .. Click on the TC.. click on edit and go to the Disks tab.
    Click Erase Disk.
    Choose quick erase.. it takes 2min to reformat the drive.

  • How can I do a complete Time Capsule backup on an external USB hard disc with the new AirPort utility V6?

    How can I do a complete Time Capsule backup on an external USB hard disc with the new AirPort utility V6?
    It was possible in the AirPort utility V5, but in the new V6 I can't find this option.

    Download and use 5.6.. the other non-toy version of Apple's Airport Utilities.
    http://support.apple.com/kb/DL1482

  • Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos.

    Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos. I wanted to see if I could view them from the hard drive. Thanks

    Hello, eco1. 
    Thank you for visiting Apple Support Communities. 
    This sounds like you are wanting to move your iTunes media folder to an external drive and have iTunes this folder from this location.  If this is the case then I would recommend taking a look at the article below. 
    iTunes for Mac: Moving your iTunes Media folder
    http://support.apple.com/kb/ht1449
    Cheers,
    Jason H. 

  • How can I set up my time capsule as the primary base station with a centurylink router? I'm trying to extend my coverage, increase signal strength, and be able to connect a printer.

    I recently moved and now I'm trying to set up my Time Capsule as the primary base station or router with an existing network that has a Centurylink modem/router. The TC still has the settings for my old network. I also have backups on it. I have the data backed up to another HD so it's not an issue to return it to factory settings if doing so deletes the back ups. Do I need to restore it to the factory settings to set it up? Also, what settings would I select on the TC (and the Centurylink modem/router) in order for the TC to serve as the router, instead of the Centurylink router? I want to be able to use the TC to back up my Mac's, print wirelessly, and improve overall performance. I tried setting the TC up and ended with 2 different networks. Can anyone please help me with this?

    The TC has to plug into the existing modem router by ethernet.. you cannot use wireless.
    You have a choice of which is router.. only if Centurylink agree to bridge their modem router.. this has to be done by the ISP and often they do not allow it.
    Is your broadband cable or adsl or fibre or ???
    If it is cable and you are allowed to purchase your own cable modem pick a pure modem version with no router in it.. plug the TC into it by ethernet.
    Setup the TC in DHCP and NAT mode.. (depending on broadband type).
    You must reset the TC to factory to do the setup.. no files are lost at all.
    Here is my current recommended setup.. with Yosemite life has become harder than ever.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
    5. Mount the TC disk in the computer manually.
    In Finder, Go, Connect to server from the top menu,
    Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
    You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
    However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
    6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
    Tell us how you go.
    Someone posted a solution.. See this thread.
    Macbook can't find Time Capsule anymore
    Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
    This user has had success and a few others as well.
    RáNdÓm GéÉzÁ
    Here is why Yosemite has fundamental issues.
    http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • How can I replace an old time capsule

    Will I lose all my data if I replace my original Time Capsule with the latest model?
    ALSO
    I just bought a wireles printer. Is it necessary to hook it up to Time Capsule to share printing through out my house on multiple devices?

    micromanage wrote:
    My TC is one of the first ever built. I am pretty sure it doesn't work for backing things up. It does do a good job as a router though. I was wondering if I should just continue with it as a router and use an online storage company? I really haven't a clue how to test it to see if it is indeed working. When I hit backup it says it is running but I have no confidence it is. If I enter Time Machine I see 1 years worth of stuff on my computer. Is that Time Capsule that allows me to see that? Or is it Time Machine? What is the difference anyway? Thanks for your reply abiout the printer. You made it very understandable
    The TC always works, and has worked, for backing things up. They all have network attached storage in them. Time Machine is the software which backs up OS X, not a backup destination. The 1 year's worth of stuff is probably on your TC. To check, look where it says "shared" in the Finder and look for a picture of a TC, this is your Time Capsule which can be accessed from the Finder.
    You could use an online storage company but backups will be very slow and space is limited, also it will end up more expensive than a new TC. Basically, I'd recommend a new TC (maybe the 2TB).

  • How can I access my Airport Time Capsule from a remote location?

    I have my 2 TB Airport Time Capsule connected to my home wireless network and I have heard it is possible to access my information stored on it from anywhere, but I have no clue how to do this.

    Frankly, this is not easy, and not for the faint of heart.  Having someone to help who has done this will save you a ton of time and headaches.
    Set up and use Back to My Mac - Apple Support
    Before you do anything though, Back to My Mac assumes that you have a simple modem......not a modem/router that is often provided by Internet Service Providers to their customers.  A modem/router.....also called a gateway.....will not allow Back to My Mac to work correctly, so if you do have a modem/router or gateway device, you will need to speak to your service provider to find out if they can provide you with a simple modem.
    A simple modem will look something like this:
    A modem/router or gateway will look something like this:
    Having said this, personally I use another method called Port Mapping to allow my Mac...or an iPhone or iPad connect back to the Time Capsule at home when I am traveling.  But, this is even more complicated than Back to My Mac, so BTMM would be the place to start for most users.
    If things look intimidating on first pass and you can locate a good tech to set things up for you, that would be money well spent.

  • How can i connect xbox to time capsule?

    Hi, I am (whilst being shouted at by my 11 year old son), trying to connect Xbox 360 to a time capsule. I tried last year without success, and afer chatting with a bloke yesterday in an Apple store, I thought I would try again. No luck. I've tried inputting every set of numbers and address I can find, but the Xbox, just will not connect. Is there a simple set of instructions that will do this? The forums I've looked at have information that is beyond me. The time capsule is connected to a Virgin media modem via ethernet. The Xbox Live connects via ethernet cable to modem just fine. I would just like it to work wirelessly so I don't have to keep plugging the cable back into the time capsule and rebooting. As an alternative is there a piece of kit that would let both the Xbox and the time capsule remain wired up to the modem? There only seems to be one connector however. Many thanks in advance.

    Connect an Ethernet cable from a LAN <-> port on the Verizon gateway to the WAN port (circle of dots icon) on the Time Capsule.
    Then, temporarily connect a spare Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule to help AirPort Utility "see" the Time Capsule. Once you have the Time Capsule configured and updated with new settings, you can remove the spare Ethernet cable.
    If that is not successful, you will need to perform a Factory Default Reset on the Time Capsule as follows:
    Pull the power plug on the Time Capsule
    Wait 4-5 minutes
    Hold in the reset button on the Time Capsule and while you continue to hold it in, plug the power back to the Time Capsule
    Keep holding the reset button for 8-10 seconds before you release it
    Wait 30-40 seconds for the Time Capsule to restart to a slow, blinking amber light
    Restart your Mac, then open AirPort Utility to configure the Time Capsule

  • How can I restore photos from Time Capsule/Machine w/o getting lots of duplicates?

    Hi All,
    I recently "lost" some photos and tried going into Time Capsule/Machine to restore them.  I went to applications, opened Time Machine, got the "Star Wars" like screen, scrolled to the appropriate date (I thought), clicked on that date, went to my user name, clicked on Pictures and then clicked on iPhoto Library.  It asked me if I wanted to create a copy called iPhoto Library2 and I said yes. 
    Next I clicked on restore and it began restoring my iPhoto Library from that day.  Unfortunately it created copy after copy after copy of each photo, hundreds!!  And it broke down each photo into faces. Again and again and again. Bottom line is that since I must have picked the wrong date my pics weren't there.
    I decided to delete iPhoto Library 2 and there were some 130,000 items to delete.  Then it took about 24 hours to secure empty my trash.
    So my question is how can I avoid this next time?  I really want to get these photos back but am afraid to try it again.
    Thanks in advance for any advice!  They are of my 19 year old niece's visit to Australia so the pressure is on!
    Kindest regards,
    Becky

    You might post this query on the iPhoto forum and perhaps someone there can provide an answer.
    I tried this on my MBP and it seems that you have to restore the entire iPhoto Library.  What I did was put the current library in a separate folder on the desktop and then I restored the library from a prior date.  If you were to do that, you then could extract the desired photos and then delete the restored library.  Then place the current library back to the original location and import the desired photos.
    Not tidy but it seems it will work.
    Ciao.

  • How can I set up a time capsule to extend my wifi network from a non-apple Medialink MWN-WAPR300N?

    I just purchased a new Medialink MWN-WAPR300N from Amazon to replace my old 2008 500 GB Time Capsule.
    I was wondering if it would be possible to use my old Time Capsule to extend the network from the Medialink router to the rooms in the back of my house. Would this be possible? How about if I use the Time Capsule as the primary point, and use the Medialink router to extend the network?
    Thanks!

    The Time Capsule would not be compatible with a Medialink product if you are thinking of trying to use the Time Capsule to extend the Medialink network using wireless only.
    The same would be true if the Time Capsule were the primary router, and you tried to use the Medialink product to extend the Time Capsule network wirelessly.
    If you can connect the two devices together using a permanent wired Ethernet connection, then you should be able to accomplish your goal.

  • How can we set up a Time Capsule to run on a Verizon FIOS network that's already set up with its own router?

    We have a Time Capsule that we want to use STRICTLY as a backup device and not as a router, which the setup system seems to want to do.  We can't get beyond the option to switch the device to a new network, which we fear will disconnect a vital Internet connection.  Any ideas?

    Once you click Update at the end of the configuration process in AirPort Utility, the TC light should turn green in 25-30 seconds.
    Close AirPort Utility as soon as you see the message that the settings have been stored to the TC as the TC will "disappear" from the AirPort Utility window.
    Once you have a green light on the TC, if you need to access the settings again on the TC, you can do so be temporarily connecting an Ethernet cable from your computer to one of the other LAN ports on the TC. Open AirPort Utility and the TC will appear.
    If you don't plan to use the wireless on the TC to provide another network, it would be a good idea to turn it off to help prevent wireless interference issues with the other wireless network.
    To do this....open AirPort Utility and click Manual Setup
    Click the Wireless tab below the icon
    Change the setting for Wireless Mode to "Off"
    Update to save the changes

  • How can I manage access to time capsule disc?

    Hello,
    I use Time Capsule disc to save my pictures and my Aperture Library.
    The security of the shared disc is done with the peripherical pasword...
    I have a problem and this is that Aperture trash do not have access to the volume disc so I cannot delete any file from Aperture because of an acess problem.
    If I see the information of the disc (at the uper level) I can see that there is a forbiden access to "everyone" so I think that the problem is there. When I want to change the authorisations to everyone (to make possible to read&write) I get a message saying that I do not have the required autorisations...
    Can anybody help me about this?

    You need to login to the TC with main admin account.
    Or reset the passwords.. do soft reset so you can change the permissions..
    Security on the TC is more apparent than real.. press the reset and the files are unaffected but the permissions return to default.
    Reset doco
    http://support.apple.com/kb/ht3728

  • How can I back up my time capsule contents to a different hard drive?

    I want to back up my time capsule to a different hard drive so I have that extra layer of safety

    There are a few ways to do this but none good.
    Airport utility will do an archive of the disk.. just open to the disk tab and click archive. The target is USB drive connected to the machine. But it can only do full backup.. no incremental.
    You can backup over network but not using Time Machine.. Carbon Copy Cloner is a $40 software that is well worth it. Super slow though doing this.
    I recommend you backup using CCC direct from the computer to the target.. otherwise you can be backing up the same problem.

  • How can I retrieve data from TIme Capsule?

    I have lost my contacts on my IPhone and also on contacts on my Mac.  How can I resrore this information from time capsule?  I have opened Time Capsule and clicked resrote on Contacts and nothing seems to happen

    See if this Helps
    Video on Restore From Time Machine
    http://support.apple.com/kb/VI29

Maybe you are looking for

  • Pacman on LFS

    So I just finished installing LFS 6.6 on my laptop and am in need of a package manager. My personal choices are either apt or pacman... After checking out apt, it seems there are far too many dependencies to search for and set up. Pacman's dependenci

  • Urgent to know my phone show out the icloud in my music file, the music is i lost my ipad then show it.

    My ipad was stolen, he take Brush Brush finished but he thought no problem you can use, but I did not go to change icloud account. I say this because my music would appear no reason someone downloads music in English and I do not go to download. I di

  • Can't boot Solaris 11.1 from burned DVD in a Mac

    Hello, The goal is to install Solaris 11.1 in a Sun Sparc T5120. Downloaded the Solaris for Sparc 11.1 Text install iso image and then burned it to a DVD-R in a Mac using the Disk Utility. The DVD mounts OK in the Mac but when trying to boot from it

  • Error in Multiprovider consistency check after technical upgrade

    Hello, We have upgraded our BW system from 3.5 to 7.0 now. When I check the consistency of Multiprovider it gives me warning message that CMP Problem occurs with one of the info provider. Because I have used 0MAT_PLANT info object into my cube. I hav

  • Table containing serial number of a material

    Hi Friends, I have activated serial number for materials. When I do GR, i give serial number for the material. I just want to know in which Table does these serial numbers specific to one material is stored. Information for the serial number for each