How can add a letter to a field in lsmw

I want to prefix a letter to the field which is being appended from flat file to the R/3. If the field in field in Flat file is 0001 then while it is uploaded if should upload as P001 in LSMW How you can do it?

Hi
There are options avialable in the LSMW to add your own logic to the standard steps.
In the Step 5 -> (Field Conversion, after field mapping has been done )
You can create your own
form .. endform routines inside this LSMW step and make the changes there.
Incase you still need any further quesries, do let me know.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Similar Messages

How to Add/Concatenate to a text field, values selected in a combo box

I have a combo box form field that allows the user to select a value from a list and click on an Add button. The Add button should add/concatenate the vaue selected to a text field in order to create a list of values selected. I'm not sure how to do this using Javascript in Acrobat? I know I need to add the javascript to the Add button's Mouse Up action. Any help would be greatly appreciated. Thanks!

Thanks so much - it works!
>>> "Gilad D (try67)" <[email protected]> 9/25/2013 9:16 AM >>>
Re: How to Add/Concatenate to a text field, values selected in a combo box created by Gilad D (try67) ( http://forums.adobe.com/people/try67 ) in JavaScript - View the full discussion ( http://forums.adobe.com/message/5712118#5712118 )
Let's say the text field's name is "Text1", and the combo is called "Combo1". You can then use this code as the MouseUp script of the Add button:
var f1 = this.getField("Text1");
var f2 = this.getField("Combo1");
if (f1.value=="") f1.value = f2.value;
else f1.value = f1.value + ", " + f2.value;
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5712118#5712118
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5712118#5712118
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5712118#5712118. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in JavaScript by email ( mailto:[email protected].com ) or at Adobe Community ( http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=3286 )
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HOW to ADD F4 help to a field on SCREEN (MODULE POOL)

Hi,
     How to add f4 help to a field in screen ..plz help
Regards,
Saleha

Hi Saleha,
                In order to add F4 help to a field in modeule pool follow these steps:-
1. First go to SE11 and create your own search help( if you dont know how to create a search help please feel free to ask me, it is very easy).
2. Now in your module pool program program go to the layout of your screen.
3. Now when you see the attributes of this field in the Dict tab you will find the field Search Help. Now here you can specify the name of the search help you created in SE11.
There is also another mehtod to create the dynamic search help. eg:- in a posted document data get the Document nos related to that company code.
The sample code is like this:-
First of all declare the module below in the flow logic of your screen then create it in your main program.
You declare the module in the PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD TXT_DOCNO MODULE VALUE_BELNR.
You also need to create an internal table where you wil store results of the select query fired below in the module.
here you will get a F4 help on the filed Document Number(TXT_DOCNO) based on the field Company code (TXT_CODCO)
MODULE VALUE_BELNR INPUT.
progname = sy-repid.
dynnum   = sy-dynnr.
CLEAR: field_value, dynpro_values.
field_value-fieldname = 'TXT_CODCO'.
APPEND field_value TO dynpro_values.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname     = 'BKPF'
      fieldname   = 'BUKRS'
      dynpprog    = progname
      dynpnr      = dynnum
      dynprofield = 'TXT_CODCO'.
CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
            dyname             = progname
            dynumb             = dynnum
            translate_to_upper = 'X'
       TABLES
            dynpfields         = dynpro_values.
READ TABLE dynpro_values INDEX 1 INTO field_value.
SELECT BUKRS BELNR
    FROM BKPF
    INTO CORRESPONDING FIELDS OF TABLE it_doc1
    WHERE BUKRS = field_value-fieldvalue.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield    = 'BELNR'
            dynpprog    = progname
            dynpnr      = dynnum
            dynprofield = 'TXT_BELNR'
            value_org   = 'S'
       TABLES
            value_tab   = it_doc1.
ENDMODULE.                 " VALUE_BELNR INPUT
Hope you find this information useful, let me know.
Regards,
Aditya.

How can add captions or title to a picture now that iPhoto doesn't work after updating to iOS 8.

I Have updated to iOS 8 and iPhoto is dismissed. How can add a caption /title (not in the image) like I was used with iPhoto? Photos has not this feature.
please, could anyone help me. I'm a real beginner. Thanks,

I Have updated to iOS 8 and iPhoto is dismissed. How can add a caption /title (not in the image) like I was used with iPhoto? Photos has not this feature.
please, could anyone help me. I'm a real beginner. Thanks,
The photos.app does not (yet) have the option to add captions or tags. It is not possible right now. You can however search for the captions you added previously using the search field. You can also search for album names. So, as a work-around, put photos that should have the same caption into an album with a name like the caption.
See: Migrating from iPhoto for iOS to Photos on iOS 8
You may want to send feedback to Apple, that captions and tags are essential and need to be added in an update. Use this form: Apple - iPhoto - Feedback

CLM How to add search-help for extension field(New Company Field) in MA.

Hi all,
Based on demand,I need to extend a new field(Company) in Master Agreement.
But I do not know how to add search-help for this field,just like User Accont page.
Anyone can help me ?thank you very muck.
Regards,
JackyCheng

Hello Jacky,
To combine all the answers above and have a topic-based reply please go through the below steps:
#1. Inactivate the current extension field Company (I see it is actually a String value and this is not what you want to have)
#2. Go to Setup -> System Setup -> Extension Reference Types
Check if you already have a Company reference type
If not, create a new Extension Reference Type for Class Company. Fill in all required information.
#3. Create a new Extension Attribute
Select Data Type: Object Reference
Now you can add the Company type as reference
Regards,
Bogdan Toma

How to add search help for standard field LIKP-TRAID

Hi friends,
How to add search help for standard field LIKP-TRAID ,
refer screen
Program Name SAPMV50A
Screen Number 2108
TrnsIDCode ( LIKP-TRAID ) ..
I need to add a search help, so that i can retrieve data from Ztable.
Thanks.
Abhi

Hi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable.

How can I create a Text-Input Field in BexAnalyzer for a Planning Function

Hello,
i want to create a pre calculation(contribution accounting) for Materials in BI-Integrated Planning. These Materials aren't in the master data. So I create a new Info Object for pre calculated materials with only a material-number as key and a text-description.
Now I want to write a Exit-Function, which creates new materials in these Info Object. The user should start this function in a planning application in BexAnalyzer. There the user should have the possibility to enter a text-description for the new material. How can I create such a Text-Field in BexAnalyzer and how can I read this text filed in a planning function (exit).
Thanks in advance

Hi Jürgen,
you can create a parameter for this in the exit function and a variable for the parameter. In BEx Analyzer then create a button for the planning function; in the button parameterization use VAR_NAME = , i.e. use an Excel formula here to get the value from an Excel input field.
The command range should be some 'hidden area' in your Excel sheet.
But may be you don't need this. Use a characteristic without master data. Then ensure that that the query uses the option 'key' as display. In new lines you can then enter the key, the system creates a SID on the fly (but the text table will not be updated). In this scenario you may take text also from the key. May be you can update the text table (online or in batch) by simply using function modules from function group RSNDI_MD (not released by SAP).
But observere that the system in BI Planning reads only the active version, i.e. if you change something on the fly the changes may not be visible.
Regards,
Gregor

How can add using DC's to new track.

Hi Experts,
We are implementing standerd ESS.Now we are planning to changes some applications under ESS by using NWDI.
Anyone help me on how can add existing DC's( already using DC's) to newtrack.
Regards,
Maheesh

Hi Mahee,
Please check Note 872892 - JDI/NWDI Cookbook for ESS/XSS. [Check Here|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=872892]
Scroll down to Attachments area in the notes, you will find the step-by-step instruction for creating ESS/MSS track.
Hope this will help you.
Thanks
Arun

How to add F1 help for a field on ALV grid

Hi All,
When we execute a program, the output is displayed using ALV grid.
on the ALV grid, if we press F1 on a field, it should popup the help document.
How to add F1 help for a field on ALV grid.
Thank you all in advance.

fill field LVC_S_FCAT-ROLLNAME of your fieldcatalog in method SET_TABLE_FOR_FIRST_DISPLAY
A.

How to add two zeros end of field

how to add two zeros end of field?

Hi srinu,
If it's a number field, then just multiply by 100.
If it's a string, then just use CONCATENATE and add the '00' to your existing string.
Hope this helps.
SL

I buy my iphone 5 in uae but i live in other country i want use a facetime how can add this feature to my iphone 5 please help me

i buy my iphone 5 in uae but i live in other country i want use a facetime how can add this feature to my iphone 5 please help me

If you wanted FaceTime, you should not have purchased your phone in the UAE. There is no way to add it back to your phone, as it has been permanently removed.

How can i open up Profit center field in F-32?

Sometimes we write-off (with F-32) some amount on the payment to account that require profit center assignment. How can i open up "Profit Center" field on the transaction? as of now it is now showing up.
Thanks!

Hi
Please Goto--> T.code: F-32
Enter required parameters and click on process open items.
then click on back out button(green arrow). you need to enter the posting key and GL account and press enter button.
Enter required parameters and the profit center visible to you. If not click on additional data tab.
Regards
Odaiah

How can add Hours in datetime and result is also in datetime?

Hi Friends,
How can add Hours in datetime and result is also in datetime?
I want such as 22-11-2006 10:30=22-11-2006 08:30+2 from dual
Select (22-11-2006 08:30+2) from dual;
And Result should be in this form 22-11-2006 10:30
Best regards,
Shahzad

sql>
select col1, col1 + interval '1' hour
from t;
COL1 COL1+INTERVAL'1'HOUR
04-DEC-06 12.21.55.000000 PM 04-DEC-06 01.21.55.000000000 PM

How can i find screen group system field?

Hi all,
How can i find screen group system field?
Thanks,
Nidhi Kothiyal

Hi,
Do you mean by the screen-group which we give for the fields to be active or inactive in module pool?
You can find it in the attributes window which comes by double clicking on the field. In that give the group name in the 1st box in GROUPS.
Thanks,
Sri.

How can add some suggested value to a propert on a Declarative Component,

how can add some suggested value to a propert on a Declarative Component?

kenyatta,
Where you want to add the value ?
If you want put some UIComponent(Value) to your declarative Component than follow my blog ( http://jneelmani.blogspot.com/2009/02/11g-how-to-create-declarative-component.html ) and add your value in STEP-5.
You can watch live-demo at http://www.oracle.com/technology/products/jdev/viewlets/viewlet.html
--Neelmani Jaiswal
Edited by: Neelmani Jaiswal on Mar 23, 2009 11:11 AM

How can add a letter to a field in lsmw

Similar Messages

Maybe you are looking for