How can AII/OER communicate with ERP if both are in same system ?

I have an ERP 6 EHP7 system with SAP AII/OER. How can ERP communicate with AII/OER ? Is PI/XI still required ?

Hi @Denise Carew,
One of the deployment options for SAP AII is that it can be installed as an add-on on the SAP ECC system. Not sure if deploying OER on the same box as SAP ECC has been an SAP approved/suggested deployment.
When you say "I have an ERP 6 EHP7 system with SAP AII/OER" does that mean you have SAP AII component and SAP EM component installed at two different stages or has OER(AII+EM) been purposefully installed on SAP to be used as your enterprise repository?
When AII is installed as an add-on to SAP ECC it will have access to the master data (like Product/Material master, corresponding GTINs, etc). There is no need to communicate this master data.
But if you need to use "Secure Track and Trace" scenario in SAP OER then SAP PI is a mandatory software component. (Please refer to SAP AII 7.1 Master Guide section 2.4,Software Component Matrix, and other follow-on sections that explains this).
Regards,
Bharat Vaka.

Similar Messages

How Can I do it with to different ipod on the same computer ?

I have and ipod(1GB) and my daughter has another ipod(4GB), how can we work with the same computer and itune for 2 different ipods ?
iPod(1GB) and a second iPod(4GB) Windows XP 2 different iPods on the same computer

this document might be of some help with that:
How to use multiple iPods with one computer
if you decide on a multiple-user-account strategy, this document might also be useful:
iTunes: How to share music between different accounts on a single computer

How can my applet communicate with servlet via HTTPS?

hi all,
I'm using jdk1.4.2_03. Tomcat 4.1.27/29.
My applet used to communicate to serlvet/JSP via http protocol. However, I wish to apply SSL in my tomcat standalone. Is there any implication towards my existing applet to servlet codes?
For example,
URL servletURL = new URL("http://www.myhost.com/Shopping");
// open connection between applet and servlet
URLConnection servletConnection = servletURL.openConnection();
servletConnection.setDoOutput(true); // allow connection do output
servletConnection.setDoInput(true); // allow connection do input
servletConnection.setUseCaches(false);
servletConnection.setRequestProperty("Content-Type", "application/octet-stream");
ObjectInputStream input = new ObjectInputStream(servletConnection.getInputStream());
resultset = (Vector)input.readObject(); //get Object from Servlet
input.close();

http://java.sun.com/j2se/1.4.2/docs/api/javax/net/ssl/HttpsURLConnection.html
I never used it though, you can check for some code here:
http://javaalmanac.com/cgi-bin/search/find.pl?words=HttpsURLConnection

How can an ipad communicate with another ipad to show a presentaion from one to many others in the room with ipad

Hi,
I would like a ipad to talk to another to do a presentation . Ideally one ipad will be the main presentation tool and the owner will turn pages on his and then the other ipads will do the same without anyone touching them.

1. Drag and drop or by selecting the pics you want to move and then clicking on the + button on the toolbar...
2. Yes
3. Select a pic and right click on it. Select Get Info:
4. At this time you can only change dates on photos.

How can I directly communicate with an apple employee or app developer about improving the "reminders" app. I have a few suggestions that I think have what it takes to work themselves into a new update!

I just want to email someone who can actually change the app for the better in the next update

http://www.apple.com/feedback/iphone.html

How can I file share with another person if both of us are using Mac operating systems? Do we need to use a third party file sharing system or does apple have this capability?

How can I file share with another personif both of us are using Mac operating systems (one of us using a Mac laptop and the other using iMac). Our intention is to have a working document that can be changed by both parties over time and both parties will have visibility to the others changes.

Use SugarSync

How can I sync iPhone with iPad

How can I sync iPhone with iPad

Huh? What are you trying to do? Be more specific.

HT4528 Good afternoon ... I would like to know how I can do to communicate with Verizone company to see if I can unlock my iPhone 5 which acquired in NY last year, buy it because you sold me released but is totally false ... I welcome your comments ...

Good afternoon ... I would like to know how I can do to communicate with Verizone company to see if I can unlock my iPhone 5 which acquired in NY last year, buy it because you sold me released but is totally false ... I welcome your comments ...

Krawly11 wrote:
That's what they told me at the time of purchase and that's why the team acquired ...
But when I get to Venezuela and introduce NANO-Sim in a line to use the phone here just does not respond to the network ... None of the 3 phone lines we handle here ...
It is a 64G IPhone 5 ...
Regardless, it is not a matter of carrier locking. Verizon iPhone 5 phones were never GSM sim-locked to begin with. Every iPhone Verizon has sold since the introduction of the iPhone 5 has been sold with an unlocked GSM slot, as required in the USA by their agreement with the FCC. They have not been allowed to sell any iPhone 5, iPhone 5c nor iPhone 5s devices with GSM carrier locking in place.
Your connection problems are from some other cause - it is NOT a carrier locking issue.

How can i create messenger with java tv API on STB

deal all.
how can i create messenger with java tv API on STB.
how can Xlets communicate each other?
how?
i am interested in xlet communications with java tv.
is it impossible or not?
help all..

You can create a messenger-style application using JavaTV fairly easily. JavaTV supports standard java.net, and so any IP-based connection is pretty easy to do. The hard part of the application will be text input, but people have been using cellphone keypads to send SMS messages for long enough that they're familiar with doing this. This doesn't work well for long messages, where you really need a decent keyboard, but for short SMS-type messages it's acceptable.
The biggest problem that you need to work around is the return channel. Many receivers only have a dial-up connection, ties up the phone line and potentially costs people money if they don't get free local calls. Always-on return channels (e.g. ADSL or cable modem) are still pretty uncommon, so it's something that you nee to think about. Of course, if you do have an always-on connection then this problem just goes away.
This is really one of those cases that's technically do-able, but the infrastructure may not be there to give users a good experience.
Steve.

Why can't I communicate with both of my GPIB devices?

I have 1 NI PCI GPIB board in my computer
I have 2 identical devices (keithley 237) connected one at address 15 one at address 16
and 2 different programs one program to connect with 15 and 1 to connect with 16
after I tell the 1st labview program to communicate with 15 then I tell the 2nd labview program to communicate with 16. then both communications come back with error device timeout. one at a time, I can communicate find with either device.
Why can't I communicate with two different GPIB devices at the same time?

Hi mrutter,
first I would try some other addresses, e.g. 5 and 11. 15, 16 could be
a special address used by the controller.
Are there any other devices on the GPIB? If so then there could be
another instrument with the same ID. Do both (or all) devices show in
MAX, and can you communicate with them in MAX (e.g. query a *IDN? )
And are you sure that you *have* setup the correct addresses in the
Keithley instruments (look in the manuals if you don't know how to
change their addresses)? Some Keithley instrument are in local mode by
default, and you must explicitely set them in GPIB mode.
Sometimes, GPIB message termination can be an issue (although both the
GPIB cards and the instruments seem to get more tolerant of this).
Also, you must be very careful not to mix different versions of
LabView drivers and LabView version. I once had three different
LabView versions on a PC, it was terrible. We had to format the
harddisk and start afresh since we couldn't remove all of the older
versions.
I first try all GPIB instruments in MAX. If all devices appear there,
and I can query commands in MAX, then I usually write my own LabView
drivers with the standard GPIB-read and -write VIs. I write them with
my oldest LabView version (say 5.1), then I am sure they will work
with all versions up to 7.1
Actually I once had a project where *no* GPIB instrument worked 100%.
We could never really find out what was the problem (it was probably a
bad PC <-> Win98 <-> GPIB card <-> LabView 5.1 constellation).
Good luck.
Johannes
On Fri, 12 Nov 2004 13:49:31 -0600 (CST), "mrutter@contech"
wrote:
>I have 1 NI PCI GPIB board in my computer
>I have 2 identical devices (keithley 237) connected one at address 15
>one at address 16
>and 2 different programs one program to connect with 15 and 1 to
>connect with 16
>after I tell the 1st labview program to communicate with 15 then I
>tell the 2nd labview program to communicate with 16. then both
>communications come back with error device timeout. one at a time, I
>can communicate find with either device.
>
>Why can't I communicate with two different GPIB devices at the same
>time?

How do Sun Convergence Communicate with LDAP?

Please tell how do sun convergence communicate with LDAP server.what api do these calls use.and where do we can find it.
Looked at the login page,it is was calling iwc.protocol.iwcp.LOGIN_URL variable.
login_url was assign as below:
iwc.protocol.iwcp.LOGIN_URL = iwc.config.session.contextPath + "/svc/iwcp/login.iwc";
please let us know what is iwcp ?
And what is contextPath its refering?
Also please let us know what kind of frame work does convergence uses to communicate with LDAP.
If possible,advice some documentation to read about this function.
thanks in advance
Edited by: testxtest on Jul 14, 2009 12:50 PM

testxtest wrote:
Please tell how do sun convergence communicate with LDAP server.Convergence uses the standard LDAP protocol to access data from the LDAP servers.
what api do these calls use.and where do we can find it.The LDAP protocol technical specifications are defined here:
http://tools.ietf.org/html/rfc4510
Looked at the login page,it is was calling iwc.protocol.iwcp.LOGIN_URL variable.
login_url was assign as below:
iwc.protocol.iwcp.LOGIN_URL = iwc.config.session.contextPath + "/svc/iwcp/login.iwc";
please let us know what is iwcp ?What is it you are trying to achieve?
And what is contextPath its refering?The "contextPath" is the Convergence server URL base for the current session e.g. http://server.aus.sun.com/iwc
Also please let us know what kind of frame work does convergence uses to communicate with LDAP.The Convergence server uses java ldap-pool libraries.
If possible,advice some documentation to read about this function.Once again, what is it you are trying to achieve, and most importantly, why?
Regards,
Shane.

HT2304 IR Receiver firmware update Apple released an update that essentially changes how the IR receiver communicates with the OS

remote no longer works the likely culprit is a missed IR Receiver firmware update. Back around version 2.1 or 2.2 of the Apple TV operating system Apple released an update that essentially changes how the IR receiver communicates with the OS. If your Apple TV missed that update and then later gets updated to the newer 3.0.X firmware your Apple TV will no longer respond to input from your remote, though the light on the front of the AppleTV will blink. The solution is to load the update manually, but unfortunately that requires ssh access on the AppleTV.
new commands

Thanks Dave,
You are a genius. I can't tell you how much I appreciate being benifit of your knowledge and willingness to share it with others. A thousand times over, thank you!! I burned the little utility to a CD on another machine/setup, ran the little sucker and restarted in OS X like a hoot!!! About 8 minutes later I had the processor upgrade installed and see quite an improvment. Again, thanks and kudos be upon you,
James

My iTunes library is missing since upgrade Lion 7.2. I have it all backed up so that's not the issue. How can I reinstall it with all my hundreds of playlists intact or do I have to recreate each one upon reinstalling the backup copy? Thank you for help

Almost my iTunes library is missing since upgrade Lion 7.2. (the last 2.5 weeks worth of added music has transferred post-upgrade, none of whcih was bought from iTunes)
I have it all backed up so that's not the issue. How can I reinstall it with all my hundreds of playlists intact or do I have to recreate each playlist upon reinstalling the backup copy? This would save a HUGE amount of time and efforts. Thank you for your help!

hi Limnos,
I do not mean the entire ITunes folder but, rather, the contents of the ITunes folder prior to September 29th. (90% of the media is missing, along with all playlists) The media that remains says it was added on 9/29 although I know most of it was added many months or even years earlier. There are no playlists listed at all, before or after 9/29. (I know for certain that I added non-iTunes purchased songs on 10/6 although I had not created playlists for them)
I have my iTunes folder backed up on both an external drive as well as Time Machine.
I run iTunes off of an ITunes folder on my computer rather than from the external, if that's what you mean about how I have it set up.
Is it OK to drag the entire iTunes folder from the external drive onto my laptop's drive and see if that fixes it?
Thank you for your help!
Deb

How can I start anew with Photos and clear the (minimal) stuff it has uploaded

I've about had it up to here with this new Photos scheme. I reorganised my Aperture libraries on both my iMac and MBA in preparation for this, delayed turning Photos on for a couple of days until I thought everything was ready based upon the limited advice that was out there, and then got stuck in an endless loop of "uploading" and "preparing" every time I opened Photos. There are 19,975 images in my Aperture library on the iMac. I was stuck at Uploading at anywhere between that number and 19,000 with no progress after hours of waiting. I tried all the tricks mentioned here including re booting, restarting the app, repairing/rebuilding the database, killing the "cloudd" process, etc.today Today when I restarted Photos, it now said I had 23,775 images to upload- 4000
more than I have-and of course it got stuck there, like it has for the last week.
I copied the previous Aperture library (pre Photos migration)back to my iMac and opened it in Aperture. Thankfully, all the photos I had taken on my iPhone this week during this Photos clusterphuck transition were in the Aperture Stream so I didn't lose any of those. I'm willing to give this whole thing one more shot. So i need some advice. How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
<Re-Titled By Host>

How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
It is hard to say from your post, why the migration did not succeed in your case.
by "stuck on upload" do you mean, you opened the Aperture library in Photos, and Photos converted it to a Photo Library, and then the upload to iCloud Photo Library did hang? Or did already the upgrade to the Photo Library fail?
If you want the Aperture library to upload to iCloud Photo Library, it needs to be on a disk formatted MacOS Extended (Journaled) and the original image files must not be referenced. Referenced originals will not upload.
Also, the upload may hang, if you do not have enough free iCloud storage, orr if one of the videos or photos in your library is in an unsupported format or corrupted.
To start over, try to repair and rebuild the Aperture library before opening it in Photos. Try all Aperture Library First Aid options - starting with repairing the permissions. (Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual)
If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
You will have to delete the photos that are already in icloud too; otherwise you are risking duplicates.
Can you launch Photos at all? If yes, delete all photos in Photos and empty the Recently Deleted album. Wait for the deletion to sync to iCloud. Then delete the Photos.photolibrary.

I cant remember my password to logon to my mac, how can i change it with out needing the old one?

i cant remember my password to logon to my mac, how can i change it with out needing the old one?

http://support.apple.com/kb/HT1274

How can AII/OER communicate with ERP if both are in same system ?

Similar Messages

Maybe you are looking for