How can aol e-mail be hacked into with the security system through Foxfire?

My aol e-mail was/is being "hacked" when I used someone else's laptop to check my e-mail while I was in Canada. How can this happen if I have "security" through Firefox/Avast? I have finally opened up a new e-mail system with comcast but what can I do in the mean time?

It looks like you are using a IMAP mail account, a protocol used by most email providers nowadays. Read -> http://en.wikipedia.org/wiki/Internet_Message_Access_Protocol
The main feature of IMAP is the sync of all the changes you do on your mail account. If you want to keep your mails on one Mac, have a look at this site -> http://kb.mit.edu/confluence/pages/viewpage.action?pageId=3908294

Similar Messages

How can we handle browser settings while dealing with the security ?

Hi ,
how can we handle browser settings while dealing with the security ?When we configured security in web.xml , during the first request the container is asking for the authentication credentials once they are provided it go's on. but when the user gives a fresh request from the second window within the same browser that time it is not asking for authentication. How can we overcome this.Is there anything to do with server configurations?
How can we make the container no to keep the things or act like session?

Ya... I am taking a small example need not happen always but a kind of possibility i am thinking off.
once the user sign out and just left without closing the browser and a friend (suppose not a good friend ... just kidding...) of that user may open the same jsp or file .This time the security is breached. If that feature or property exists....
I know what you might say ... the user will log-out before leaving where a programer might invalidate the session at the time of log out.
Consider the case of a bad Programing or just a programer might forget to invalidate,At that time as a application administrator how can he solve that issue.
Thanks.......
Edited by: user8483670 on Jun 6, 2011 1:08 AM
Edited by: user8483670 on Jun 6, 2011 1:09 AM

How can i use Mail on 2 macs with the same mail address?

Hi,
I have two Macs, connected through WLAN. From each Mac I can use Mail (sending and receiving) with the same mail address. This worked well; on each Mac I have separate files storing the mails (input, sent, trash, …).
Some days ago I had to change the provider. (Perhaps this may be the reason for my problem?) Now both mail systems are connected - in the way that if I put on Mac *1 a mail into the trash it is automatically thrown into the trash on Mac *2.
What is to be done to separate the two systems (i. e. make them independent of each other)?
Hans

It looks like you are using a IMAP mail account, a protocol used by most email providers nowadays. Read -> http://en.wikipedia.org/wiki/Internet_Message_Access_Protocol
The main feature of IMAP is the sync of all the changes you do on your mail account. If you want to keep your mails on one Mac, have a look at this site -> http://kb.mit.edu/confluence/pages/viewpage.action?pageId=3908294

How can I make mail retry sending messages in the Outbox?

Howdy all,
As the title says how can a force Mail to try to resend the messages in the outbox? I use my MacBook Pro in a number of different environments and when I am on one flakey access point in particular or when I have forgotten to open Safari to reauthorize recently on another network Mail will fail to contact the SMTP server. When this happens my message gets stuck in the outbox to be sent later. My problem is that I do not know how to get it out of there effectively.
Once I have fixed the transitive error in the network (or or the problem fixes itself) how do I get the messages out of the inbox? At this point I can send more messages with no problem and they will happily go out but those in the queue just sit there.
Now, I have tried a number of things like quitting and restarting Mail, bringing the various network interfaces back up and down, and other things to try to trick Mail into sending the queued messages but that has been haphazard at best. I can't help thinking that there is something obvious I am missing.
Thanks for any help!

Highlight the message in the inbox, double-click on it, and click on the "send" icon
You may even consider BCCing yourself to see whether the message actually goes or not, and you just have an artifact copy stuck in your outbox that you could then just delete.
Otherwise, copy&paste the stuck message body into a new message, and delete the stuck one out of the outbox before attempting to send the new one

I am trying to connect my fathers ipod touch to itunes on my computer, how can i sync itunes on my machine with the ipod such that his songs don't get deleted and i could add new songs to it (mp3 on my computer)

I am trying to connect my fathers ipod touch to itunes on my computer, how can i sync itunes on my machine with the ipod such that his songs don't get deleted and i could add new songs to it (mp3 on my computer)

You cannot merge accounts. Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37
One computer using multiple iTunes Store authorizations - http://support.apple.com/kb/HT1206

How can I buy a song but always asked the security questions and you don't remember them what should I do

How can I buy a song but always asked the security questions and you don't remember them what should I do

Write down your security questions.......
Here is what you should do if you do not remember the answers to your Apple ID security questions:
Try answering them at least once to see if you can get them right, even if you are not sure you remember the answers to your security questions.
If you are confident you can't remember them, try one of the following:
If you have three security questions and a rescue email addresssign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers.
If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
If you have one security question, but don't remember your Apple ID passwordcontact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
Note: If you have forgotten your password and answer your security questions incorrectly too many times in a row, you will be unable to try to answer your security questions for a period of time. During that time you will not be able to reset your password and will not have access to your account.
Cheers,
Alec

HT4743 I just purchased an iTunes TV show and it successfully downloaded. It is now saying that I do not have the proper version of QuickTime on this version of iTunes (10.6.3). How can a show I purchased be incompatible with the latest version of iTunes?

I just purchased an iTunes TV show and it successfully downloaded. It is now saying that I do not have the proper version of QuickTime on this version of iTunes (10.6.3).
How can a show I purchased be incompatible with the latest version of iTunes?
I want a refund, but I can't even figure out how to request one through support. Super frustrated and long time Apple customer.

After a day of trying, both iTunes and my Apple TV are telling me that the episodes of Scooby Doo I purchased are incompatible due to QuickTime. I still don't understand how I purchased something from iTunes that doesn't work with iTunes.
the exact error I receive when I try to play an episode is the following:
"This movie requires QuickTime, which is not supported by this version of iTunes."
Any advice would be great!

HT3775 How can i play my avi formatted movies with the new mac OSX 10.9.2 update?

How can i play my avi formatted movies with the new mac OSX 10.9.2 update?

Try using VLC or installing both QuickTime 7 and Perian. Nothing will work with all AVIs; some of them require codecs not available for Mac OS X.
(105507)

How can I get "IMAQ Line Fit" stable (with the same points)

How can I get "IMAQ Line Fit" stable (with the same points)
I my vision applications I use a lot off times "IMAQ Line Fit"
some times the results are not Stable.
See vi and word document attached.
When I take the same points but in a other order (sort)
then suddenly all points are used.
In this case I was looking for a edge in vertical direction (Y).
I found the points but "IMAQ Line Fit" did not function well.
I tried changing all settings like pixel radius and minimum score and
also threshold and so on. But no result.
Then I sorted the points reversed and that worked. See vi.
I use labview Labview 8.6.0 and IMAQ machine vision.
Maybe this problem is solved in a newer version.
Please let me know.
Thanks
Attachments:
TEST-imaq-line-fit-86.vi ‏169 KB
IMAQ-Fit-Line-Problem-86.doc ‏230 KB

Thank You for your reaction Hossein,
This "one application" uses "Line fit" about 20 000 000 times a day.
about 200 will go wrong. With your setting the the "Line fit" for this occasion will work but others will go wrong.
A algorithm should be:
1e Stable, when using the same points and settings the result MUST be the same. How the points are sorted should not matter.
2e Accuracy
3e Speed
4e Testing. Is very difficult but al least close points and the same points and sorting ... should be done
NI now as made a " IMAQ Line Fit" Problem CAR (Corrective Action request) 298016.
so in the future there will be a update.
In the mean while a made a line fit which uses Bisquare option from Linear Fit.vi :
from C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\analysis\6fits.llb
This is a temporary fix because "IMAQ Fit Line VI" is not so stable.
Because outliers should be rejected only Bisquare does this reasonable.
This program does NOT USE "Minimum Score" and "Pixel Radius"
Valid fit = When there are enough points within Outlier_Distance.
Algorithm steps:
- Determine if line is more horizontal then vertical, Compare DeltaX with DeltaY
- If DeltaX <= DeltaY then SWAP X Y and later Swap back
- Sort Points at on X value
- First : Bisquare Linear Fit
- Calculate distances to the found line for all points
- Inliers: Points within Outlier_distance
- Outliers: Points outside Outlier_Distance
- Only use Inlier Points
- Check again if DeltaX < DeltaY then SWAP X Y later SWAP back again
- Second : Bisquare Linear Fit only with the Inlier Points
- Results are from the second fit
Warning : This Program is Not so accurate and Not so fast
See attachments it is in labview 8.6
If some has a improvement please let me know.
Thanks
Attachments:
svi_fit_line_Bsquare_and_draw.vi ‏18 KB
Fit_Line_Bisquare_Linear.vi ‏40 KB

How can I get my document to save with the rotated view last used?

How can I get my document to save with the rotated view last used?

Possible with Adobe Acrobat, not Adobe Reader.

How can i see what phobe hacked into my account

I got an email saying my password was changed. Is there anyway I can tell what phone or any other information as far as what kind of phone or anything else to that matter. I think I know who did it but how can I tell if anyone else is on my account ? I changed my password but will that kick them out of my account if they are already logged on under my name? I have the new Samsung note phone and he just got the new I phone 6.

Post in the iCloud forum, this one is for Macs running OS9, and that was a very long time ago

How can I send a personalized mass email with the mail app?

I need to be able to send a mass email where the "Dear So-and-so" is personalized for each recipient. Is it possible to do this with Mail? If so, how can I accomplish that?

you'll have to use a feature called "Mail Merge"
it works with either MS Word + Outlook
http://office.microsoft.com/en-ca/mac-word-help/use-mail-merge-to-create-a-form- letter-RZ103895371.aspx
or
Pages + Mail
http://support.apple.com/kb/VI129

How can I migrate my old sync data to the new system when I don't have any devices signed in

I just reformatted my computer harddrive and reinstalled both Windows and Linux. Now that I have everything installed and updated, Firefox is asking me to migrate to the new syncing system they have. Problem is, I want to still be able to sign into the old system just to be able to get my bookmarks so I can migrate them to the new system.
I still have my sync key, and login information for the old system, but I just want to know how to access it once to get my information. I can handle everything from there.

hello, in this case you'd probably have to use a workaround and download the prior firefox version, disable automatic updating for the moment (in options > advanced > update), link it to the old sync account and upgrade after you have successfully restored your data this way...
[[Install an older version of Firefox]]

How can I make a transparent text marking with the courser in InDesign CC?

How can I mark a Text with the Courser and see things, that are behind it (next layer…)
Of course, it works at Version CS5.5.
I havn't found any preference for this problem.
Thx 4 help

I'll think there was a missunderstanding. So i've made screenshots of the problem.
Here in CS5.5:
https://www.dropbox.com/s/bxwuqjh9n8a2nr7/Screenshot%202013-11-20%2009.09.54.png
Here the same in CC:
https://www.dropbox.com/s/8x9kfsmf1vlf7k3/Screenshot%202013-11-20%2009.09.38.png
Sometimes I have to reconstruct old documents and have to make small modifications.

How can I use a shared library made with the application builder?

Hi,
I am using LabVIEW 7.1 running on Slackware 10.1 (kernel 2.4.29) and I am trying to call a graph display from a C program that I use for debugging VME access from a VMIVME controler. So using the application builder I built the VI as a shared library (graph.vi -> graph.so) containing a function called "graph". In my main program the call to the dlopen fails with the error: "graph.so: undefined symbol: UninitLVClient". When I examin graph.so with nm I see that UninitLVClient and other LabVIEW functions are indeed undefined and using ldd shows that graph.so has dependencies only on libc.so.* and *linux*.so.* but not on LabVIEW related stuff. Those functions are defined in the liblv.so that's in the cintools directory but I have no idea if the user is supposed to use that.
So I think I am missing an important concept here. Can somebody help or direct me to some documentation (I found lots of information about how to link external code to LabVIEW but nothing about how to link LabVIEW code to an external program)?

Thanks Watermann,
your message has been very useful so now I am linking to the proper library but I still have problems when trying to load dynamically the shared library produced with LabVIEW. It is strange that I could successfully load the lvrt library at loading time but it does not work when I am loading the library at execution time.
I made a small LabVIEW program that prints a hello window and I am calling it from a C program. In the first program main.c I am linking to the lvrt library at loading time and it works but in the second one I am linking dynamically at execution time and it does not work. For my work I need to be able to load code done in LabVIEW at execution time. Any help is appreciated!
Program main.c:
// small program to call a LabVIEW shared library
#include
#include
#include "hello.h" // got this from the LabVIEW builder, i.e. when I made the hello.so
int main(void)
printf("Hello from C!\nLets call LabVIEW now\n");
hello();
printf("Bye ... \n");
return 0;
The command to compile main.c, i.e. linking shared library lvrt when loading main program:
gcc -Wall -I /usr/local/lv71/cintools/ -o main main.c hello.so -l lvrt
The LD_LIBRARY_PATH has been defined and exported:
$ LD_LIBRARY_PATH=$PWD
$ export LD_LIBRARY_PATH
IT WORKS!
Program main2.c:
// small program to call a LabVIEW shared library
#include
#include
#include
int main(void)
void * h_lvrt;
void * h_hello;
void (* hello)(void);
char * error;
printf("Hello from C!\nLets call LabVIEW now\n");
// open LabVIEW RunTime shared library
// in my computer located at /usr/local/lib/liblvrt.so
h_lvrt = dlopen("/usr/local/lib/liblvrt.so", RTLD_NOW);
// check for error
error = dlerror();
if (error) {
printf("error : could not open LabVIEW RunTime library\n");
printf("%s\n", error);
return 1;
// open hello shared library
// in my computer located at /home/darss/lv_call/hello.so
h_hello = dlopen("hello.so", RTLD_NOW);
// check for error
error = dlerror();
if (error) {
// close LabVIEW RunTime shared library
dlclose(h_lvrt);
printf("error : could not open hello library\n");
printf("%s\n", error);
return 1;
// get function hello from library hello.so
hello = dlsym(h_hello, "hello");
// check for error
error = dlerror();
if (error) {
// close hello shared library
dlclose(h_hello);
// close LabVIEW RunTime shared library
dlclose(h_lvrt);
printf("error : could not get the hello function\n");
printf("%s\n", error);
return 1;
// call hello function
hello();
// close hello shared library
dlclose(h_hello);
// close LabVIEW RunTime shared library
dlclose(h_lvrt);
printf("Bye ... \n");
return 0;
The command to compile main2.c, i.e. dynamically linking library lvrt at execution of main2 program:
gcc -Wall -o main2 main2.c -l dl
The LD_LIBRARY_PATH still defined and exported.
IT DOES NOT WORK!
Program output:
Hello from C!
Lets call LabVIEW now
error : could not open hello library
/home/darss/lv_call/hello.so: undefined symbol: WaitLVDLLReady

How can aol e-mail be hacked into with the security system through Foxfire?

Similar Messages

Maybe you are looking for