How can check ip of network printer? how can check MAC address?

hello,
my printer name is,
HP Laserjet 1022n
product no. Q5913A
serial no. VNRT79T074
give me a details of the issue
mittal sagar

Hi,
You may locate both the Mac Address and the IP Address by prinitng a Configuration Page.
You may fnd the steps to print the report listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c01125585
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

How to check MAC address from host from local network

Hello,
I must save information about my network enviroment, at some periods of time (IP, Host Name, MAC Address, and later some information from SNMP). I have IP addresses of all devices. Could any one have an idea how to check MAC address. In java.net.* I didn't find anythink about my problem.
Please give my an answer, if you konow any solution.
Marcin Kowalski

hi !
I've typed ipconfig on my PC which has windows2000 pro. as the OS!!
but i couldn't get th line you've mentioned "Physical Address" !!
what could be wrong .. ?!! hope you could help!!
thanks!!
C:\>ipconfig
Windows 2000 IP Configuration
Ethernet adapter
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.130.128.210
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.130.128.1

How to block mac address in 2800 router

sir
how to block mac addresses in cisco 2800 router

Hi,
To block mac addresses you can simply create Mac based ACLs which ranges between
700 to 799
Example:
access-list 700 deny xxxx.xxxx.xxxx.xxxx
access-list 700 permit yyyy.yyyy.yyyy.yyyy
now you can apply it on interface:
int f0/0
access-group 700 in
exit
Regards,
Rahul Chhabra
Network Engineer
Spooster IT Services

How to see mac address in IPS 4240 ???

Hi all,
How to see mac-address of inline-vlan-pair ? and how to see mac-address of management interface in IPS ?
Regards,
Kiran

Hello Kiran,
The inline-vlan-pair itself is tied to a particular interface. So you're really asking for the MAC address of the interface associated with the inline-vlan-pair.
The MAC address of sensing ports will be added to a "show interfaces" via CSCse84414. You can currently view the MAC address of sensing interfaces by doing an "ifconfig -a" from the service account.
Thank you,
Blayne Dreier
Cisco TAC IDS Team
**Please check out our Podcast**
TAC Security Show: http://www.cisco.com/go/tacsecuritypodcast

ACS V4.1 How to separate MAC addresses in an Authentication rule....?

I'm configuring Agentless Authentication based om MAC addresses sendt from the access switch using MAB (MAC Authent. Bypass). I got it up and running, but with just one MAC address configured in the Authentication rule. When I try to configure more than one address in the rule, I get an error saying this is not a MAC address. How do you separate the MAC entries in the same Authentication rule. The doc says you can configure 10.000 addresses in one rule.

The ACS can authenticate MAC addresses sent from an AP/Switch. A properly configured AP/Switch will attempt to authenticate a MAC address using Secure-PAP authentication with the ACS. The MAC addresses are entered into the ACS as users, with the username and password being the MAC address.
1. From the ACS main menu, click on the USER SETUP button.
2. In the USER text box, type the MAC address to add to the user database. Use no dashes, periods,
or any other delimiter.
At the USER SETUP screen, enter the MAC address in the SECURE-PAP PASSWORD text box.
3.Click the SUBMIT button.
Adding the AP/Switch to the ACS server
1. From the ACS main menu click on the NETWORK CONFIGURATION button.
2. Click on the ADD ENTRY button.
3. Configure the DNS name of the AP, the IP address of the AP, the RADIUS shared secret and the
Authentication method.
4. Make sure to select RADIUS (Cisco Aironet) in the AUTHENTICATE USING drop down menu.
5. To complete, click the SUBMIT+RESTART button.

How to change mac address on mac

i'm sry i'm not sure if this is the right section or not but yeah.... nyways does anyone know how to change mac address on a macbook?

If you have not updated your OS you can use the following command.
sudo ifconfig enX ether xx:xx:xx:xx:xx:xx
You will need to replace the X with your network number and the xx:xx:xx:xx:xx:xx with the mac you want to have.
Then run
sudo ifconfig enX down
sudo ifconfig enX up
This change will last till your next reboot.
cheers
NOTE: This is not working in 10.5

How to change mac address on wrt54g router

How to change mac address on wrt54g router?

are u sure u wanna change the MAC of the WRT54G ? it's not possible....you can however clone the MAC address of your PC onto the router...depending on your ISP.

How to find MAC address for WAN port for Airport Express 2nd Gen.

The New Airport Express has a LAN and a WAN ethernet ports. How can I find the MAC address for the WAN ethernet port as my Service Provider needs it for provisioning....I can fid MAC address for Ethernet and for two wireless 2.4 & 5GHz but not for WAN ethernet port using Airport Utility 6.1

Many thanks for the swift response. However, there is no WAN MAC address on the box or on the device anywhere. I even used magnifying glass to find one .
The airport utility shows only three mac addresses. One for 2.4GHz, one for 5GHz and one fo the ethernet (LAN port) whereas there is another ethernet port in the device mentioned as WAN port and I am still not able to find the MAC address for the WAN ehternet port for Airport Express (2nd Generation).
Will appreciate a response to make th device work wiht my service provider as providing them the WAN mac address is a must. Had there been an option for cloning mac address, the issue would have not been there.
Many thanks again - in advance.

How to get MAC address from IP address in LAN

Hi all,
How to get MAC address from IP address in LAN (windows or any OS), I would have all IP addresses of my LAN, so I would like to know all MAC address.
Code examples are highly appreciated.
Thanks & Regards,
abel...

abel wrote:
Yeah that is only working for local system, but how to get remote system's MAC ..?
Thanks for quick reply ...
Edited by: abel on Jan 28, 2009 12:10 AMIt is my understanding that only one person ever found the holy grail which you seek. But sadly [_he's dead_|http://forums.sun.com/profile.jspa?userID=649366]
As a curious aside how did you manage to get the list of IPs?

How to find mac address of a client computer in specified time and port in WIFI WCS Control system

how to find mac address of a client computer in specified time and port in WIFI WCS Control system

WCS record-keeping is very crude.
You'll get the time/date when the client authenticated. You'll get the local inside address but you'll need the router to translate the outside IP address and the port.
You will need a proxy server to determine what sites did a wireless client goes.

How to change mac address on time capsule

Hi there,
How to change mac address on time capsule?

There are routers that allow you to create/clone a mac address to whatever you like. Since many companies use the mac address to 'register' a unit connected to it's system, you usually just have to let them know you've changed your router and they will reset your system to accept connections from the new device.

How to view MAC addresses on the network?

I can log into other non-apple routers via browser and see a list of MAC addresses of equipment connected to the network, but I don't see how to view them if using my Airport Extreme and going in through Airport Utility.
Any thoughts?

If It's the same Mac that can see the PC, it's already set up correctly. Something must be wrong somewhere.

Networking question; How to use MAC address to find out IP address.

Hi there,
I want to discover the IP address of an attached device (Netgear switch) on my network. I know it's MAC address – can I use this to get the IP address?
Thanks in advance

Short for Media Access Control address, a hardware address that uniquely identifies each node of a network. In IEEE 802 networks, the Data Link Control (DLC) layer of the OSI Reference Model is divided into two sublayers: the Logical Link Control (LLC) layer and the Media Access Control (MAC) layer. The MAC layer interfaces directly with the network medium. Consequently, each different type of network medium requires a different MAC layer.
On networks that do not conform to the IEEE 802 standards but do conform to the OSI Reference Model, the node address is called the Data Link Control (DLC)
I have a feeling you might have the term MAC Address confused
Depending on the device you are using it may be that you can type in 192.168.1.1 and hit return key, and it will give you the Router Utility and this can give you the assigned IP Addresss to external devices, if the router is used.
Don

How i can change MAC-address of ethernet?

in the tiger i just was typing "sudo ifconfig en0 lladdr (or ether) 00:0c:76:18:25:ac" but in leopard that doesn't work.
Programms like MacDaddy X and ChangeMAC doesn't work too.
I dunno what i must do, please help.
how it works in leopard?
Message was edited by: Flamesix

i'm having the same problem (and because of that i claim Apple did really forgot the 'Computers' part when they changed their name, i had to install Leopard just to see i cant change the mac thus connect to my lan, thus i had to install tiger back, grr)
in another thread i've found this alternative to en0 ether xx:xx... :
sudo ifconfig en0 lladdr 00:00:00:00:00:00
but i remember trying it without success, anyone has a clue how to change the MAC address in leopard? on top of it - why on earth would they downgrade a system? is this one of these 300 new features? sweet :P

How to make mac address gmail contacts overwrite the ones on my HTC Android phone - I don't want to sync - that makes the phone scramble and overwrite my computer. I want to remove or correctly overwrite the phone information as I have done with iPad.

Please help - I am beginning to hate google, my android and gmail. I have just wasted about 5 hours in a futile attempt to try and get my current Mac contacts list on my computer updated to my phone. I'm not that computer literate but I have looked up about google phone accounts, vCards, backing up contact lists, what SD on phones are, and God know what else. I have searched the internet and tried all sorts of things and I still have a mac with a now correct contact list (after the iPad contacts scrambled it and I spent ages manually correcting them all) and a phone with an outdated contact list. If you try and sync them the phone wants to overwrite the computer one just like the iPad did (would it be so **** hard to give you a choice on the phone as to which overwrites which!). After all the advice on the internet failed, I got the bright idea to completely delete all the ones on the phone and if it was empty of contacts the computer one could be exported to it. Not as simple as it sounds. First I backed up (I think) my computer contacts list. Numerous futile attempts to go through the phone options to globally delete all contacts did not work - they gave a warning message and you got to choose whether to continue or not, I did, and it looked like it might be working as it changed to zero data on the phone, but then they all popped back up again from God knows where from, but without their little added bits like pictures of the people. So, I tried un- syncing the darn phone from google and then deleting them globally. That didn't work either. I tried deleting them all again and again and google would crash and not let me do it. It is absolutely ridiculous that this is so damned difficult to do (especially if you are not computer savvy) and that you cannot choose which device overwrites which when syncing. I gave up and ticked sync with Google again (not that it appears to do anything to the phone contact list at all). So after 5 hours I am back to where I started from, with a phone showing all the same incorrect contacts (but the pictures are back), which wants to overwrite the computer if I try any sort of sync, and no way to fix them except go into each one manually and try and do it - and how long would that take (and I've already wasted hours and hours fixing scrambled contact lists!). I think I will do a print out of the computer contact list and just carry it around with me like an address book - so much bloody simpler. So now I have a headache, am fighting an overwhelming urge to hurl the phone at the wall, hoping for a heat wave to evaporate icloud things and am wishing I had bought an iPhone instead of the stupid HTC Android. Can any one offer me any suggestions on how to get rid of the contacts on my phone and replace them with the ones in my mac address list - hopefully after that they can sync to their hearts content and not stuff everything up again (which was why I unsynced google a while back - because the phone's list kept making stuff ups and scrambling and duplicating my computer contacts list). Am I the only one on the planet having this problem or is there someone else out there who has had it and solved it.

Without "pretending" to be yourself on the other phone (change settings) there's nothing else you can do.
iOS devices are meant to be single user and can't view iCloud.com the same way a Mac or PC can do.
You need to find a desktop or laptop machine (Mac or PC) to log in at iCloud.

How can check ip of network printer? how can check MAC address?

Similar Messages

Maybe you are looking for