How can config for SNP Aggregate only aggregate demand not stock on hand?

Dear SCM Expert,
Now we want the system aggregate only demand and not aggregate stock on hand ( Stardard system aggregate both of them) so what i have to do?
thanks so much.

Hi
The stock on hand is a calculated key figure. It is calculated based on macros. So you have to write a macro or you can copy the stock balance macro logic from the standard detailed book. In the detailed book no aggregation is done. But to avoid aggregating stock on hand you have to put logic in the macro
Thanks
Aparna

Similar Messages

  • How can I run a step only if TestStand not is terminated?

    I want to run a step I Cleanup only if TestStand not is terminated. Is there a variable I can read who tell this?

    Jan Inge -
    I did not know whar version of TS you are using so I created the sequence using TS 2.0.
    In the example a save the state to the numeric result of a numeric limit step and the step determines that execution is normal if the state is 1, so the step passes, otherwise it fails. The precondition of the next steps use the pass/fail status of the first step. This way you do not need a local variable.
    Scott Richardson (NI)
    Scott Richardson
    National Instruments
    Attachments:
    CleanupStepNotRunDuringTermination.seq ‏30 KB

  • All my PDF forms are automatically transformed in Word forms,how can I change that and only choose the PDF I want to transform

    All my PDF forms are automatically transformed in word forms,how can I change that and only decide which PDF to be transformed in word

    Hi Ulfsch,
    Thank you for posting on the Adobe Forums, kindly try the step mentioned below.
    1) Right click on any of the PDF file and choose the option open with
    2) Select choose default program
    3) Select Adobe Reader/Acrobat from the list
    5) Check the box "always open this type of file with selected program" (not the exact same wording)
    6) Click OK
    If you are on Mac, CTRL+Click on the file.
    Go to Get info
    Go to Open with
    Change it to Adobe Reader/Acrobat and click change all.
    Thanks,
    Vikrantt Singh

  • How can one accept that the only way to sync with OSX 10.9 is through I cloud?

    How can one accept that the only way to sync with OSX 10.9 is through I cloud?
    One is now obliged to send private information to an external server...

    Thank you for the link but what a waist of time.
    Who is the idiot that decided to drop manual syncing of contacts and calendars?
    I am on the point of dropping all APPLE machines!
    I am looking to sync without having to worry about security issues, keeping my files and passwords locally on my machines, and not an external server such as a cloud drive.
    Do you know if Outlook syncs also over an external server?
    Do you know of this solution? http://www.codetwo.com/public-folders/share-windows-files-securely/

  • When I facetime the ipad (email address) it calls my phone. The accounts are completely separate. How can I get this to only call the ipad and not my phone as well?

    When I facetime the ipad (email address) it calls my phone. The accounts are completely separate. How can I get this to only call the ipad and not my phone as well?
    It calls both the ipad and iphone when calling the associated email address for the ipad. However, when I call the iphone it does not call the IPAD.
    Thanks for your help

    Are you trying to message another Apple device?
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
     Cheers, Tom

  • How can I use table headers only without using rows.

    how can I use table headers only, without using rows and without leaving the space.
    If anyone could say me how to paste the pic in this questions, I would have shown it.
    The flow of view is in this way
    {Table header(table on top of table)
    column header1___|| column header2__ || column header3__ ||}
    <b>Here is the blank space I am getting, How to avoid this space?this space is of one table row height</b>
    {Contents column1 || Contents column2 || Contents column3 || (This is of other table below the uper table)}
    I am using scroll for the content part of table only.
    So I am using two tables.
    I am using NW04.

    I did the possibles you explained, but couldn't get rid off the space.
    Any other solutions?
    I am keeping the header static and the content columns scrollable.
    I have used two tables one to display header above and the other to display only the contents.
    I have put the contents table in scroll container.
    And the header table in transperent container.
    Thanks and Regards,
    Hanif Kukkalli

  • APO DP release( PIR) sent to snp, how can i process snp hueristic.

    Hi scm gurus,
    APO DP release( PIR) sent to snp, how can i process snp hueristic.
    for Ex:APO DP starting MPOS-SBP-PA-PB-UFP-IDP like this.
    In APO SNP hueristic what is the process, can u explain me.
    Thx,
    PRASAD

    Hi scm gurus,
    APO DP release( PIR) sent to snp, how can i process snp hueristic.
    for Ex:APO DP starting MPOS-SBP-PA-PB-UFP-IDP like this.
    In APO SNP hueristic what is the process, can u explain me.
    Thx,
    PRASAD

  • How can i fix white display only shows apple logo ond loading symbol

    How can i fix white display only shows apple logo ond loading symbol! Pls help me guys!

    shutdown your mac by holding power button. Then Hold CMD+V and press power button now it will start to show some text wait for few minutes and somewhere it will stop post that screenshot

  • How can I open Internet explorer only pages on a mac? The website that I need to access only permits internet explorer

    How can I open Internet explorer 'only' pages on a mac, without creating a drive partition and installing windows separately?
    I've tried winbottler, but it doesn't seem to serve my purpose. The web site that I'm trying to access only permits Internet explorer.

    Microsoft has not written IE for Mac for years so unless you want to create a parition and install Windows, or user a Windows emulator, you're out of luck for installing IE on a Mac.
    The web site that I'm trying to access
    There might be a work around for you since it's just the one site.
    Go to the Safari menu bar click Safari > Preferences then select the Advanced tab.
    Enable the Develop menu.
    Now click Develop from the Safari menu bar then click User Agent > IE 9, 8, or 7

  • I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

    I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

    If you want Bridge CS6 to open when using Photoshop CS6, you must quit Bridge CC.
    Then File menu > Browse in Bridge will bring up Bridge CS6.
    If Bridge CC is already open, The File > Browse in Bridge for Photoshop CS6 will use Bridge CC and Bridge CS6 will not open.
    I hope that's the answer you were looking for.
    Gene

  • How can I make my computer only recognize my network and not that of one of my neighbors?

    How can I make my computer only recognize my network and not that of one of my neighbors? This is for when I am at home, and everytime the computer goes to sleep it essentially loses the connection, only to pick up my neighbors network when it is awaken.
    I am on Comcast (Xfinity) Highspeed Cable wireless modem/router
    Thanks in advance!
    Mark

    You can make your network the preferred network.
     > System Preferences... > Network > Advanced... > Drag your preferred network name to the top of the list.

  • How can i develop charts using only xml defination

    how can i develop charts using only xml defination.can any one please let me know
    manks

    hello,
    in reports 6i the charts are created using oracle graphics which stores the chart definitions in a separate file (.OGD). there is not XML interface for graphics.
    with reports 9i and the introduction of the BIgraphBean the definition of the chart-properties is also done in XML.
    reports 9i will be available with iAS Release 2.
    regards,
    the oracle reports team

  • How can i find all included pictures which are not in a album? (only in the Library)

    How can i find all included pictures which are not in a album? (only in the Library)

    Hi there,
    I'm afraid I don't quite understand your question. All images are in your Library and only those you specifically select from that Library would be in an Album. What platform are you using? Revel Mac, Elements, web browser, etc?
    Here is a link with some helpful information:
    FAQ: File Basics: How do I Upload, Download, Share, and Delete files in Revel?
    Thank you,
    Glenyse

  • I am trying to sync music from my iTunes library on my iMac to my iPhone. I only want selected music but I'm getting unwanted songs. How can I delete those songs on my iPhone or how can I prevent these unwanted songs that have not been selected from appea

    I am trying to sync music from my iTunes library on my iMac to my iPhone. I only want selected music but I'm getting unwanted songs. How can I delete those songs on my iPhone or how can I prevent these unwanted songs that have not been selected from appearing on my iPhone? Help!

    http://support.apple.com/kb/HT1296

  • How can I buy movies available only on another country's iTunes?

    how can I buy movies available only on another country's iTunes?

    You can't, you can only buy from your own country's store - to be able to buy from another country you will need to be in that country and have a valid billing address, and iTunes account. in that country. You can try requesting that the films that you want to buy be added to your store, but ultimately it's the film studios decision : http://www.apple.com/feedback/itunes.html

Maybe you are looking for

  • How can I delete an iWork file off of my iMac?

    I have an iMac using OS X version 10.8.5. I downloaded an attachment, which saved to the Desktop as an iWork file. Now I want to delete it, but when I drag the file to the trash I get an error message telling me that the file cannot be converted and

  • Why is FM10 crashing when I change conditional text settings?

    When I go from "show certain conditions" to "show all" in some, but not all, files in a book, FM 10 crashes. I've tried saving as MIF, then reopening, but it still happens eventually. Sometimes it happens with the first file I open, sometimes not unt

  • Date Validation - End date before Start date

    This may be a very simple validation but I seem to be having trouble. I've got a form which requires a date range to be selected (Date Picker fields)...a Start date, and an End date. I've created a Function Returning Boolean validation with the code

  • Running iTunes within a WinXP guest system on Linux host

    Since I don't think Apple will release a Linux iTunes version I am thinking about running WinXP as a guest on a Linux host (VMware). Could I safely use iTunes within this virtual machine, buy songs from the iTunes Store,... or would the digital right

  • How to start and stop server?

    This is a design issue that may not belong in this forum, but bear with me, please. I have a stand-alone RMI server that I start thusly: public class StartServer {     public static void main( String[] args )         AppContext context = Server.getCo