How can Cost Analysis MCI8 become datasource?

We have implemented in R/3:
Cost Analysis MCI8 (S115 info structure/table) and
Location Analysis MCI3 (S061 info structure/table).
We now want to extract this info and upload into BW.
The structures do not appear in the list in transaction LBW0 (Connect of LIS Info Structures to SAP BW).
Is there a standard datasource that I just can not locate or do I just define my own generic datasource and define table S115 as the extraction?
Thx, Leanne

bump
Regards
Juan

Similar Messages

Cost Analysis MCI8

Dear All,
I've assigned value categories to cost key figures in spro settings of Information sysytem for plant maintenance and customer service-->Assign value categories to maintenance cost key figures
and executed cost analysis of equiment and I'm able to get only actual cost and planned cost but not material cost,internal labour cost and service cost.
Can any body throws light on this..
Thanks in Advance
Johnson

Hi Johnson,
You should first verify that costs analysis is correct in the orders. After making customizing changes, run program RIPMCO00 to update order costs. You can test with a single order.
To recalculate cost data in Info Structures you can then also run RIPMS001. For report MCI8 the relevant structure S115.
-Paul

How can i analyse a song of whale (FFT for exanple) i have on a CD-Rom?

How can i read the CD-rom and analyse the frequencys of the song with labview'

If the audio is in a common file format such as WAV, you can open the file directly in LabVIEW, read the data into your application and then pass it to any of the analysis functions such as a FFT, or display it on a graph. If you do not have LabVIEW take a look at the evaluation version, otherwise take a look at the Getting Started with LabVIEW manual.
Christian L
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

How can I analyse corba idl files just as xml files are analysed by dom api

I want to analyse and control corba idl files just like xml. We know that xml can be controled with org.omg.dom api, every element in xml can be read and write.But now, I want to realize a small program which can read every element in idl (eg. module, interface, methord) and auto-produce a element-tree. How can I do? Have dom api for idl files?

You need a parser - try Antlr (http://www.antlr.org/). I believe it comes with an IDL grammar.
Chuck

How can you see a hidden Datasource?

Using Crystal Reports v.11.0.0.1282 I have written a report, which is running through a C++ program. I recently had to change Datasources, and now, the report will only run on the c++ program if the data is in the old datasource and not the new one. When I look at the datasource location expert, I only see the one I had just changed to. However, when I look at the dependancies I see this problem:
Error Data Source: Verify for table Command failed. Possible report corruption. C:\acclaim\reports\Invoice Support.rpt
Warning Data Source: There are unlinked tables in your report. In some cases this could lead to an excessive quantity of records. C:\acclaim\reports\Invoice Support.rpt
Also when looking at or trying to change the links, I see this error:
More than one datasource or a stored procedure has been used in this report. Please make sure that no SQL Expressoin is added and no server side group-by is performed.
How on earth can I see where the problem is. I believe as the writer of the c++ program does, that it is still referencing the old Database, but I can't see it.
PLEASE HELP!
thanks you in advance!

this is an ODBC connection, but yes I have tried a redo of the connection.
I also can run the same query though my SQL manager, and get the results which I see in my report. There does not really seem to be a problem with my report. The problem seems to be with the program which is using it. The man which had written is, is adamant it is not his program, and I am adamant that it is not my report. However, the above errors may indicate that there is in face an error with my report. I haven't been using crystal reports for very long so it's very frustrating when there is no documentation helpful to the errors.

How can Cash security deposit become "real" in billing?

Hi gurus,
I am searching for a solution that let cash security deposit become "real" after billing.
I use FI-CA event R401 in which I set field XGUMB_401 = 'X' on FI-CA document relative to cash security deposit. This item is statistic (DFKKOP-STAKZ = 'H').
After bill has been created, cash security deposity is displayed as follows in transaction FPSEC3: there is a trash can icon near FI-CA statistic document and a new fi-ca document appears in the list. This new document is the clearing document for first statistic document, but it is still statistic. (see attached image).
Furthermore, it is not possible to reverse bill because of this new statistic document that is also clearing document for the first.
I want this new document to be "real", not still statistic.
Can someone please tell me if there is another event or something I can modify by customizing that let me achieve my goal?

Hi gurus,
I am searching for a solution that let cash security deposit become "real" after billing.
I use FI-CA event R401 in which I set field XGUMB_401 = 'X' on FI-CA document relative to cash security deposit. This item is statistic (DFKKOP-STAKZ = 'H').
After bill has been created, cash security deposity is displayed as follows in transaction FPSEC3: there is a trash can icon near FI-CA statistic document and a new fi-ca document appears in the list. This new document is the clearing document for first statistic document, but it is still statistic. (see attached image).
Furthermore, it is not possible to reverse bill because of this new statistic document that is also clearing document for the first.
I want this new document to be "real", not still statistic.
Can someone please tell me if there is another event or something I can modify by customizing that let me achieve my goal?

How can I create my own datasource

Hi All,
I would like to create my own datasource. Please provide me a step to do so. I don't want to modify the standard datasource in RSA6 because many fields will be appened and I don't want to interrupt the other BI consults as well.
Thank you in advance,
Sukanya

Hi,
You can create your own datasource by using Generic extraction in RSO2 in R/3 side.
Generic extraction Function module:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
Generic Delta:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
GENERIC EXTARCTIONS:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/generic%2bextraction
Regards
Tg

How can I analyse user statuses a maintenance order had in the past?

I want to make an analysis from maintenance orders backlog (orders over required end date). I use IW39 and analyse the user status to define the status of the order in the proces......
In this way, however, I am only able to make an analysis of the data in SAP at this moment, so not in history. Is there a way to analyse the status of maintenance orders user status in the past (or the change of user statuses in the past)?
Thanks!

Thanks for your answers;
I learned that the data for change status and related time can be found in the table JCDS (and for a single order via I near the order status); So if I can get the data from JCDS table I can learn the status of an order in history. By using (incidental analysis) excel I can look if an order is over its required end date in history to analyse the backlog.
Right?
Thanks.
Edited by: FvDiep on Jan 16, 2011 7:59 PM

How can i correct PO becomes Commitment

Hi,
PR / PO Created 2yrs back and posted to CO as commitment now we dont have any commitment in PR only PO has commitemnt. Now we closed and completed the PO and invoice, while closing my project its showing still there is open commitment.
When i debug and check there is entry COSP table in 2yrs back now i cant see any offset value hence its not allowing to close my project any oss note or any suggestions.
Jack

ok jack , what you have to do is go to ME22N and open that Purchase order and scroll down to the item detail in the delivery tab you will see Delivery completion indicator go and check this and Save the Purchase order document
Now this will close the PO.

How can i using datasource in toplink's map file

In the TopLink map :
<toplink:login xsi:type="toplink:database-login">
<toplink:platform-class>oracle.toplink.platform.database.oracle.Oracle10Platform</toplink:platform-class>
<toplink:user-name>test</toplink:user-name> <toplink:password>C23487CFA591952D44310804F3D591CB</toplink:password>
<toplink:sequencing>
<toplink:default-sequence xsi:type="toplink:native-sequence">
<toplink:preallocation-size>1</toplink:preallocation-size>
</toplink:default-sequence>
</toplink:sequencing>
<toplink:driver-class>oracle.jdbc.driver.OracleDriver</toplink:driver-class>
<toplink:connection-url>jdbc:oracle:thin:@192.168.0.1:1521:testdb</toplink:connection-url>
<toplink:bind-all-parameters>true</toplink:bind-all-parameters>
</toplink:login>
How can i modify it using datasource?

The login information stored in the map file is good for direct connection and design time login information.
For your runtime login information I would use the sessions configuration (sessions.xml). It provides complete deployment configuration:
   <session>
      <name>my-session</name>
      
      <project-xml>META-INF/employee-basic.xml</project-xml>
      <session-type>
         <server-session/>
      </session-type>
      <login>
         <datasource>jdbc/TopLinkDS</datasource>
         <uses-external-connection-pool>true</uses-external-connection-pool>
         <uses-external-transaction-controller>true</uses-external-transaction-controller>
      </login>
      <external-transaction-controller-class>oracle.toplink.essentials.transaction.oc4j.Oc4jTransactionController</external-transaction-controller-class>
      <enable-logging>true</enable-logging>
      <logging-options>
         <log-exceptions>true</log-exceptions>
         <print-thread>false</print-thread>
         <print-date>false</print-date>
      </logging-options>
   </session>Doug

Before designing cube/ODS in BW how can weknow that the datasource is delta

HI All
Before designing cube/ODS in BW how can we know that the datasource in source R/3 is delta enable or not? I mean what type of datasource is this?
And aslo what do we mean by Standard Extractors? will this mean like for this there wont be any datasource or table? Iam nill in this part? can anyone explain me regarding this
Regards
Balji

Hi Balaji,
To find whether a datasource is delta enabled or not goto R/3 -> se11/se16 -> roosource table -> your datasource -> check the "DELTA" field value. If it is blank then no delta is supported.
All extractors would have a datasource and extract structure associated with it. It does not matter whether it is business content or custom.
Bye
Dinesh

How to start study to become Oracle DBA

Hi all,
I am new to this group ..i am working with SAP.i hav a little dought that how can i start to become a DBA on oracle..what r the major responsibilits that i need to perform being a DBA..pls provide some narration and tips/documents search or links regard my requirement...
I believe surly i will get solution for my links regard..
Thanks & Regards
mahesh N

Hi,
kEYS TO BECOME SUCCESSFUL ORACLE DBA
Re: Wants to become a DBA
How to become a good DBA
Good luck!
Marcello M.

How can we improve Apple service?

Well meaning Apple staff are being disempowered by the rigid customer architecture and poor customer support systems. How can we help Apple become more customer focused before it losses its long time brand advocates?

P ~ Welcome to the Support Communities.
pfoley_Aus wrote:
How can we improve Apple service? (...) How can we help Apple...?
Send feedback. ...Regarding your experiences at the Apple Store, use this form:
http://www.apple.com/retail/feedback/
And there are more feedback categories at lower right of this page:
http://www.apple.com/contact/

I bought mcbook pro but i mistakenly put password what i want was no password it is inconvenient how can i erase password

Whenever I put password it is inconvenient How can I make it zero meaning I do not have to put numbers whenever it starts and how can stop the screen becomes black it becomes black some time after i do not use I want my screen always same stayed not changed...thanks...

Easier to assist you if you tell us which OS X is installed ...
Open System Preferences > Users & Groups
Click Login Optioins.
Select the account you want to login automatically from the pop up menu on the right.
You may need to click the padlock icon to make changes. You may be prompted for your admin password.
If you don't see Users & Groups click Accounts > Login Options

I have a windows pc. How can I download purchased items which have become corrupted on my PC. I can't use iCloud

I have a windows pc. How can I download purchased items which have become corrupted on my PC. I can't use iCloud without an Apple device. I have gone into purchased but next to each title it merely says 'downloaded'. I need to download them again. It will cost a fortune to re-purchase the corrupted music!

I tried that but it just shows 'downloaded'. There is no little cloud next to that wording. On an Itunes help page it shows a 'library icon' once you have logged in but that does not appear on my version of ITunes which is 11.1. I have lost so many peices of music! Is this some ploy by Apple to get you to buy them all over again?? Thanks for you response, if you can think of anything else I would be most grateful

How can Cost Analysis MCI8 become datasource?

Similar Messages

Maybe you are looking for