How can create a function module for currency and quantity fields
hi,
i want to create a function module with some fields.when i activated it give some errors for
netpr,menge,wemng fields(currency, quantity fields).error is it asks for reference fields.
please send me solution for it.
sreenu.
Hi Sreenu,
While creating CURRENCY/QUANTITY fields in the DataBase Table, you have to enter a REFERENCE TABLE and a REFERENCE FIELD to the field.
For that, after entering the field name and the data type in the correcponding columns, you have to place the cursor on the data type of the required field and click the CURRENCY/QUANTITY FIELDS tab. You will find two columns called REFERENCE TABLE and a REFERENCE FIELD.
you have to enter a reference table in which a currency/quantity field is used and a reference field which is a currency/quantity field in that table.
For Example, below is the table details.
FIELD DATATYPE LENGTH DEC.PLACES REF.TABLE REF.FIELD
1.SNO CHAR 5
2.AMOUNT CURR 10 2 T001 WAERS
3.NOS QUAN 5 KNA1 /VSO/R_PAL_UL
Here Field 2(AMOUNT) is a CURR field whose Ref. Table is T001 and Ref. Field is WAERS and Field 3(NOS) is a QUAN field whose Ref. Table is KNA1 and Ref. Field is /VSO/R_PAL_UL.
Hope this will help you.
Regards,
Vaitheeswaran
Similar Messages
-
How to create ENQUEUE function module for s567 table
Hi Experts,
Anyone Plz tell the steps how to create a ENQUEUE function module for the table s567.
Its somewht urgent, plz help me.
<REMOVED BY MODERATOR>
Mohana
Edited by: Alvaro Tejada Galindo on Mar 10, 2008 4:21 PMHi,
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
You have to use these function module in your program.
Hope this will give a basic idea.
Regards
Sudheer -
Currency and Quantity fields problem in FM
Hi ALL
<b>Can anyone help me on this. Very Urgent</b>
I created a FM, in that i used NETPR,MENGE,WEMNG.(CURRENCY , QUANTITY ) fields.
When i am trying to activate, it is asking for reference fields.
I don't know how to resolve it...
Regards
Prabhakarhi,
pls refer to this thread for use...
how can create a function module for currency and quantity fields
Message was edited by: Ganesh Sundarakrishnan -
Currency and quantity field allignment in smartforms
hi experts
i am facing problem in smartforms allignment for currency and quantity fields. these fields are not coming exactly on the same line of the other fields with char types. please help me resolving it.
Moved to Crrect Forum
Edited by: Vijay Babu Dudla on Apr 6, 2009 4:38 AM&wa_vbap-kwmeng(C)&
adjust with left and right alignment.
it will definately work.
what happend? isn't ur problem solved?
Edited by: MONIKA DHUMAL on Apr 6, 2009 4:38 PM -
How to Create the Function Module Exit
Hi,
How to Create the Function Module Exit. Please tell me the step by step procedure.Hi,
Check this link for how to create the function module exit..
http://sap.niraj.tripod.com/id62.html
Thanks
naren -
How can call a function module(RFC)in one server to another sever in my rep
How can call a function module(RFC)in one server to another sever in my report program.
What i am know whenever rfc enabled immediately radio button checks then only it will come.
please justify.Syntax
CALL FUNCTION func DESTINATION dest [EXPORTING p1 = a1 p2 = a2 ...]
[IMPORTING p1 = a1 p2 = a2 ...]
[CHANGING p1 = a1 p2 = a2 ...]
[TABLES t1 = itab1 t2 = itab2 ...]
[EXCEPTIONS [exc1 = n1 exc2 = n2 ...]
[system_failure = ns [MESSAGE smess]]
[communication_failure = nc [MESSAGE cmess]]
[OTHERS = n_others]].
http://help.sap.com/saphelp_47x200/helpdata/en/22/042537488911d189490000e829fbbd/frameset.htm -
Function Modules for Data and Time
Hi all,
I need 2 function modules for date and time. when we pass current data(sy-datum) and current time (sy-uzeit) into function modules, shoud get date in <b>dd/mm/yyyy or dd.mm.yyyy</b> and time in<b> HH:MM:SS</b> formats.
Thanks in advanceHi Ranjith,
i think this will b usefull for you..
SAP Bar Chart Function Modules and what they are used for
Function module
Used for
BARC_GRAPHIC_PBO
Starting bar chart at PBO time, using a graphic profile (parameter PROFILE)
BARC_GRAPHIC_PAI
Analyzing data returned by the graphic
BARC_SET_TIME_AXIS
Setting start and end of time axis
BARC_SET_OPTIONS
Setting options
BARC_ADD_CHART
Creating a chart
BARC_SET_CHART_ATTRIB
Setting chart attributes
BARC_ADD_SECTION
Creating a section on the time axis
BARC_SET_SECTION_ATTRIB
Setting section attributes
BARC_ADD_RIBBON
Adding a ribbon to the time axis
BARC_SET_RIBBON_ATTRIB
Setting attributes for ribbons in the chart
BARC_ADD_GRID
Adding a time grid
BARC_SET_GRID_ATTRIB
Setting grid attributes
BARC_ADD_LAYER
Adding a layer (graphic elements)
BARC_SET_LAYER_ATTRIB
Setting layer attributes
BARC_ADD_LINE
Adding a line
BARC_ADD_CALENDAR
Creating a calendar
BARC_SET_CALENDAR_ATTRIB
Setting attributes for a calendar
BARC_ADD_TIME_PROFILE
Creating time profiles
BARC_SET_TIME_PROFILE_ATTRIB
Setting attributes for time profile
BARC_ADD_INTERVAL
Adding a time interval
BARC_SET_INTERVAL_ATTRIB
Setting time interval attributes
BARC_ADD_TIME_OBJECT
Creating a time object
BARC_CONVERT_DATE
Creating a date string in bar chart format
BARC_REVERT_DATE
Converting a date string in bar chart format to date and time
BARC_ADD_DATELINE
Creating a date line
BARC_SET_DATELINE_ATTRIB
Setting dateline attributes
BARC_GET_PROFILE_CONTENTS
Obtaining profile contents for customizing a chart
BARC_GET_COLUMN_WIDTH
Selecting new column width
BARC_SET_COLUMN_WIDTH
Setting the column width
BARC_GET_TEXTINDEX
Obtaining the text index of a field
BARC_SET_LABELS
Positioning the chart display
BARC_SET_COLUMN_ATTRIB
Setting column attributes
BARC_SET_ROW_ATTRIB
Setting row attributes
BARC_SET_ROW_HEIGHT
Setting the line height
BARC_SET_MAXCHARTS
Setting the maximum number of charts sent
<b>If its usefull reward points
</b> -
How can i get best practice for SD and MM
Please, can any body tell me how can i get best practices for SD and MM for functional approach?
Thanks
UtpalHello Utpal,
I am really surprised, in just 10 minutes you searched that site and found it not useful. <b>Check out my previous reply "you will not find screen shot in this but you can add it in this"</b>
You will not find readymade document, you need to add this as per your requirement.
btw, the following link gives you some more link for new SAP guys, this will be helpful. <b>Check out HOW to BASIC transaction</b>
New to Materials Management / Warehouse Management?
Hope this helps.
Regards
Arif Mansuri -
HT4436 how can i setup one account for me and my kids ?
how can i setup one account for me and my kids ?
One account each, or one account for all of you to share?
Either way, follow the instructions here: http://www.apple.com/icloud/setup/
Remember, if you share an iCloud account, you won't be able to maintain independent Contact lists, calendars, bookmarks etc. They will all be synced to all devices setup using the same account. -
Function modules for material and description
Hi,
Pls let me know the function module for material and description.
Regards,
BalaHi,
Please use FM: MD_MATERIAL_GET_TEXT
Reagrds
Raju -
Can u pls tell what r the currency and quantity fields in detail.
hi to all can u pls teell
can u pls tell what r the currency and quantity fields in detail.
what is reference table .and reference fields .why we r giving theese reference table names while creating the currency fields .Hi,
Currency amount fields and quantity fields are numeric fields which each have a currency or unit field assigned to them. The correct interpretation of the values in these fields depends on its currency or unit of measure. Therefore, you can decide whether you want their corresponding currency/unit of measure to be displayed before or after the field, or not at all. Proceed as follows:
1. Select the field.
2. Choose one of the options from the window on the lower left (before, No currency field/unit, or after).
3. Choose Apply.
For more information check the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/0b/5da4e42cf511d5b692006094192fe3/frameset.htm
Following are system variables of currency:
SY-CCURS
R/2 - exchange rate and result field for CURRENCY CONVERSION. Not filled in R/3.
SY-CCURT
R/2 - table exchange rate for CURRENCY CONVERSION. Not filled in R/3.
SY-CDATE
R/2 - exchange rate date for CURRENCY CONVERSION. Not filled in R/3.
SY-CTABL
R/2 - exchange rate table for CURRENCY CONVERSION. Not filled in R/3.
SY-CTYPE
R/2 - exchange rate type for CURRENCY CONVERSION. Not filled in R/3.
SY-DCSYS
Dialog system of the R/2 System. Not filled in R/3.
SY-WAERS
Formerly the company code currency after reading a posting segment. Not filled in R/3.
Regards,
Bhaskar -
Help for search help and currency and quantity fields
hi,
please help me for creating search help and when the currency and quantity fields are used please expalin this with steps as i am a learner..
regards
raj.Hi Rachu,
Welcome To SDN
Help On Search Help
Go to se11
Select radio button Search help
click on create
and select elementary seacrh help
selection method---->tablename or viewname
press f1 in search help exit we will get a FM named as
F4IF_SHLP_EXIT_EXAMPLE.copy that FM from se37 in to Zprogram.we have a record_tab for copying the view by using this tab we can restrict the values from the view or table.this values are populate into another table .Then ,
come to se11
and in our seacrh help we will pass components of the search help
Source: https://forums.sdn.sap.com/click.jspa?searchID=14985345&messageID=5618016
Help On Currency and Quantity Fields:
Whenever you have to maintain fields for currencies and quantites u need to refer them to currency key and quantity key which also have to be present in the table.
If suppose you are creating a table for Employee. And suppose that fields would be like :
EMPID -
employee id
EMPNAME
employee name
DEPARTMENT --- department
SALARY -- salary ( Data Type u2013 CURR )
WEIGHT -
weight of the employee ( Data Type -- QUAN )
Now the fields SALARY AND WEIGHT fields should refer to currency and quantity keys. So you need to have two more fields like
CURRKEY --- Data Type ( Cuky )
Quantity --- Data Type ( Unit )
Now we have to attach the field Currkey to the field Salary
And the field Quantity to the field Weight
So when u create a table you can see a tab Currency / Quantity fields.
Here You can give the reference table and the reference field against the salary and weight fields.
Source: https://forums.sdn.sap.com/click.jspa?searchID=14985456&messageID=5692074 -
About Currency and Quantity Fields
How does the Currency and Quantity fields are set to a field in a Table, created in SE11
can you please send examples of each
Thankyouhi,
its same like any other field.
but one difference :- <i>the reference field is requires.</i>
<i>why reference field?</i>
The reference field is used for the output, the output/input format of a currency field depends on the value of its reference field.
For example if you create a screen using the field KONV-KBETR :
the reference field is RV61A-AWEI1:
if you set RV61A-AWEI1 = 3
the value in KONV-KBETR is beeing shown with 3 decimals
So you could see 3,000 but this value is automatically stored as 30.00
if you set RV61A-AWEI1 = 2
the value in KONV-KBETR is beeing shown with 2 decimals
All this convertions are automatically made in according to the value setted in reference field.
You can see this using the statament WRITE with options CURRENCY, try this:
PARAMETERS P_KBETR LIKE KONV-KBETR.
WRITE: P_KBETR CURRENCY '3'.
WRITE: / P_KBETR CURRENCY '2'.
WRITE: / P_KBETR CURRENCY '1'.
Hope u gor the idea
Rgds
Anver -
Currency and Quantity fields in Nested Table
Hallo Experts,
I have created a Interface with import Sturcture SLS_PRT_COM. This Sturcture have many nested Sturctures. Now I created a Table type ZEBFO with line type VBDPA. VBDPA has many currency and quantity fields such like GEWEI.
Now I have created internal Table of ZEBFO.
Declare the nested Quantity field in the Currency/Quantity Fields section, using the autofiller (the buttons to the right of the field).
Create an adobe form for it and a program and execute it.
Dump
The following syntax error occurred in program "/1BCDWB/SAPLSM00000034 " in
include "/1BCDWB/LSM00000034F01 " in
line 1769:
"Field "VBDPA-GEWEI" unknown. "."
can somebody help me what shall I do.
Thanks
Best regards
Waseem Rana
Edited by: ranawaseem165 on Feb 17, 2012 9:14 AMHi,
When Creating a Structure ,include currency and quantity Fields in the same structure and Refere those as currency and
Quantity Fields.
In the Form when click on Currency/Quantity Fields,they automatically visible and you can add them .
Thanks.
uma -
Currency and quantity fields in Smartforms
Hi Experts,
How to refer currency and quantity fields , in my form i am using FAKING and NETWR fields,
in global definitions one tab is there currency and quantity fields in that in filed name column what i have to give and reference filed , PLease can u you give some examples, so that i can understand easily...
Useful answers are awarded.
ThanksThe 'Currency/Quant. Fields' tab in the Global definitions allows you to link the field containing a value to the field containing its unit of measure.
For example, my purchase order has two line items, one is for 6 eggs (which have unit of measure PC) and 2.5 kilogramms of flour (UOM is KG). When these are written on the output the eggs have no decimal places, the flour has 2 (this is defined in configuration). So;
Eggs 6 PC
Flour 2.50 KG
This happens only if I specify in the 'Currency/Quant. Fields' tab the field that holds my quantity and the reference field that hold the UOM, and specify data type QUAN. Same concept applies for currency where they have different numbers of decimal places (for example Japanese Yen is always expressed as a whole number with no decimals).
Regards,
Nick
Maybe you are looking for
-
I loaded files on the cRIO but used upper case letters for the startup directory. Now I cannot access the RIO since it didn't boot. The proxy server comes up read-only so I can't reload the files or change the directory. I tried the RS232 port but
-
IPad 2 connects to Wi-Fi on iMac, not to internet
I've had this problem off and on since I got the iPad. All of the discussions I can find about connecting the iPad to the Internet via a computer with an Ethernet connection mention doing things to the router. I do not have a router (that I know of).
-
Error in File to Jdbc(MS Sql Server)
Error is like----- attemt to establish db connection failed with sql error com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL "jdbc:microsoft:sqlserver://HYDHTC65586:1433;DatabaseName=Northwind"; SAPClassNotFoundE
-
Exchange 2013 DLP with Exchange 2010 mailboxes
Ive got an Exchange 2007/2010 environment. I've been looking at Exchange 2013 and am interested in the DLP funtionality. There are no plans to move mailboxes to Exchange 2013 but would it be possible to install an Exchange 2013 CAS/Mailbox server in
-
Buffer Overwrite Error -200141
I am using an extension of the code called "Measure Buffered Semi-Period-Continuous.vi" from the example finder. Inside the main while loop I have added some additional calculations before I return to DAQmx Read in the next iteration. I am getting