How can delayed delivery update be configured for Inbound delivery ?

Hi All,
How can delayed delivery update be configured for Inbound delivery ?
There is setting for Outbound delivery delayed delivery update but how the same functionality be used for Inbound delivery?
Regards
Jimmi

Hello Jimmi,
Unfortunately I must confirm that the Delayed delivery update is only available for outbound deliveries. Please see below note for further details
664316 Tips for the delayed delivery update for TO
I hope this information helps!
Martin

Similar Messages

How can i access web sites configured for internet explorer?

I try to access web sites thatwork with internet explorer from my mac and cannot load the home page. How can i access these pages?

Not sure if you're using a different browser than Safari. If not try Firefox or Chrome.

How can I manually verify autodiscovery configuration for on premise environment from Lync 2013 desktop client?

I have very limited access to an environment (basically just user access). I am documenting the Lync 2013 cilent for this environment. I was provisioned a limited SIP enabled account for testing. Autodiscovery from the Lync 2010 client works, but not from
the 2013 client. I can connect (with some issues) from either 2010 client (autodiscovery) and 2013 client (manually configuring the server). So I want to verify if the Autodiscover is configured correctly to work with the 2013 client or not and if the reason
it fails for me is due to something wrong with my account or if this will happen with other users?
I have checked the lyncdiscoverinternal.domain.com and it resolves and is reachable. I can navigate to https :// lyncdiscoverinternal.domain.com/Autodiscover/AutodiscoverService.svc/root/domain and it returns the information I would think it should
including hrefs to Internal/Autodiscover, Internal/AuthBroker, External/Autodiscover, External/AuthBroker, Internal/Mcx & External/Mcx as well as fqdns for SipClientExternalAccess, SipClientInternalAccess, SipServerExternalAccess & SipServerInternalAccess.
The AuthBrokers urls return what I believe is the expected RemoteService Service pages. The Mcx urls return what I believe is the expected McxService2 Service pages. The SipClientInternalAccess & SipServerInternalAccess fqdns are both resolvable and
reachable. The Autodiscover urls return hrefs for Domain and User. Those Domain urls return the same information as the initial root/domain url and the user url (which I believe is the one that is actually opened by lync during the autodiscover process) returns
what I believe is an expected 401 - Unauthorized: Access is denied due to invalid credentials page.
If I explicitly configure the Lync 2013 client to use the fqdn listed for SipClientInternalAccess, the client will log me in. However on Automatic configuration, it fails to log me in.
One other note is that when I watch with Wireshark, I observed that it is getting another internal server fqdn from somewhere. We'll just say that the SipClientInternalAccess fqdn is lyncABC.domain.internal. When looking at Wireshark and the DNS requests,
I'm also seeing a lync2013ABC.domain.internal that does resolve and is reachable and can also be used as the explicitly listed server in the Lync 2013 client and it will log in. However, that fqdn is not listed in any of the root or domain url replies. So
I'm not sure where it is coming from or how to check that.
Is there any additional information anywhere that can tell me exactly what the behavior of the 2013 client is when trying to find the server to authenticate to and how I can reproduce any missing steps manually to determine what it is identifying as the
login server (if any) since it is obviously not the trying the one listed as SipClientInternalAccess?
Thanks,
Richard

Hi Richard,
To narrow down the issue, you could refer to the following steps first.
1. Delete the Lync client 2013 user profile and registry key.
User profile:
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
Registry Key:
HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
Certificate:
a. Open Windows Certificate Manager. To do this, press Windows + R, type certmgr.msc, and then click OK.
b. Expand Personal, and then expand Certificates.
c. Look for a certificate that's issued by Communications Server and delete it.
2. Upgrade Lync client to the latest update.
3. Check the DNS records(A records and SRV records) again.
Best regards,
Eric

New Condition TAble for Inbound Delivery

Hello
i want to maintain a new Condition table for the Inbound delivery picking with the combination of _Delivery type/Plant
so that the Inbound created for the particular plant alone uses the particular output type.
Where in IMG can i configure the new Condition table for this combination for the Inbound delivery ?

Hi,
Go to SPRO > Logistics Execution > Shipping > Basic Shipping Functions > Output Control > Output Determination > Maintain Output Determination for Inbound Deliveries > Here perform following;
- Define Condition Table for Inbound Delivery
- Define Output Types for Inbound Delivery
- Define Access Sequence for Inbound Delivery
- Maintain Output Determination Procedure
- Assign Output Determination Procedures

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

HT1338 i have apps to be updated but when i try to update them a message pops out saying "You have updates for other accounts, please sigh in with the other id". Can some one help me how can i still update the same with the new apple id ive created.

i have apps to be updated but when i try to update them a message pops out saying "You have updates for other accounts, please sigh in with the other id". Can some one help me how can i still update the same with the new apple id ive created. As i dont have the access to the earlier id anymore.

You cannot. The apps are assigned to that Apple ID and there is nothing you can do to change that. You could choose to download them again with the new Apple ID, any paid apps will need to be purchased again.
Hope that helps.

HT1311 How can I get updates for apps with new Apple ID

How can I get updates for apps with new Apple ID. I have apps that I got for free, and some that I have purchased. I had to create a new Apple ID because I don't have a credit card now.

Apps will always be tied to the ID in which they were purchased or downloaded under. You can not change this unless you buy or download the free app using the new ID.

I would like to update my eMac from 10.4.11 to 10.6. How can I get this os version for the update?

I would like to update my eMac from 10.4.11 to to 10.6.x How can I get this os version for the update?

Highest an eMac can go is 10.5.8...
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Trouble is appl no longer sells it, you have to search eBay & such for the full retail version, not any grey Install Disc.
There are workarounds if the 867MHz is the only hangup...
http://sourceforge.net/projects/leopardassist/
List of Applications Not Compatible with Leopard...
http://guides.macrumors.com/List:Applications_Not_Compatible_with_Leopard
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.

How can I check my outstanding balance for apps I've downloaded so I can clear it so I can update my apps?

How can I check my outstanding balance for apps I've downloaded so I can clear it so I can update my apps?

I believe the item will get automatically charged to the credit unless it is an item for which such a payment method is not valid (e.g., a gift card).
Showing account balance in iTunes and on a mobile device - https://discussions.apple.com/message/20443884

Have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for

have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for her iphone. we need to save her photos, music, etc to ? icloud and the phone stuff to verizon cloud? so when she gets her new Iphone6 she can have all her "stuff" back on the new phone. hope this makes sense. please offer suggestions here or at [email protected] thanks for your help!

Oh no! I'm sorry to see there's a lot of confusion here and data shared, x-rayDon. We can definitely work to fix. This happens when two devices share the same Apple ID, so she will need to reset hers. She can do so by assessing this link Apple - My Apple ID. You will need to decide who will keep the account if want separate Apple IDs since purchases cannot be shared unless you do Family Sharing.
RobinD_VZW
Follow us on twitter @VZWSupport

Since updating my iPhone 4 to iOS5, my music stats (play count, last played, etc.) no long sync to iTunes. How can I fix this? Thanks for the help.

Since updating my iPhone 4 to iOS5, my music stats (play count, last played, etc.) no long sync to iTunes. How can I fix this? Thanks for the help.

If you have any podcasts in your iTunes library you should see a Podcasts sync setting tab to the right when you connect your phone and click on its name on the left sidebar (see image below). On this tab check to sync podcasts and sync your phone.

How can I use srvctl command line for change "Failover type" and "F method"

Hi all,
I am using Oracle One Node (11.2.0.3), and I have a service:
/u01/11.2.0/grid/bin/srvctl config service -d orcl
Service name: orcldb
Service is enabled
Server pool: orcl
Cardinality: 1
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: false
Failover type: NONE
Failover method: NONE
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: BASIC
Edition:
Preferred instances: orcl_1
Available instances:
I would like to change "Failover type" and "Failover method" to:
Failover type: SELECT
Failover method: BASIC
How can I do that? Is there any graphical tool for it? Or, How can I use srvctl command line for change it?
Thanks in advance.
Leonardo.

user10674190 wrote:
Hi all,
I am using Oracle One Node (11.2.0.3), and I have a service:
/u01/11.2.0/grid/bin/srvctl config service -d orcl
Service name: orcldb
Service is enabled
Server pool: orcl
Cardinality: 1
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: false
Failover type: NONE
Failover method: NONE
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: BASIC
Edition:
Preferred instances: orcl_1
Available instances:
I would like to change "Failover type" and "Failover method" to:
Failover type: SELECT
Failover method: BASIC
How can I do that? Is there any graphical tool for it? Or, How can I use srvctl command line for change it?
Thanks in advance.
Leonardo.srvctl modify service -d database_name -s orcldb -q TRUE -m BASIC -P BASIC -e SELECT -z 180 -w 5 -j LONG
Also see
11gR2(11.2) RAC TAF Configuration for Admin and Policy Managed Databases [ID 1312749.1]

How can I use one iTune account for 2 phones

How can I set iTunes account up for 2 phones, in able to sync them and keep them updated?

Are you using both phones, or is there a second person involved.

How can I make a intro page for my website, then after the intro has run make the page automatically change to my we site home screen

how can I make a intro page for my website, then after the intro has run make the page automatically change to my website's home screen

You can do this using a meta refresh but the problem is you have to add it to the html file for the page very time you publish changes.
A better way is to create a splash page and upload it to the server outside of the folder produced by iWeb. Example HERE.
The meta refresh is added to the head section of the html file...
<meta http-equiv="refresh" content="32;url=http://www.domain.about.com/Page-Name.html">
The delay time in seconds is marked in blue and the URL to the redirect page is in red.

How can delayed delivery update be configured for Inbound delivery ?

Similar Messages

Maybe you are looking for