How can edit the Bit Rate on my music?

I have downloaded some lectures that are below 128 Bit Rate, so they are not being uploaded onto iTunes Match.
I was told to change the Bit Rate to 128, and that would solve the problem.
How do I do that????

Thank you Airsculpture- I have gone into the menu bar on iTunes, but I can'rt seem to find the location where to choose or select a highter Biz Rate. Can you give me a little more guidance please?
Limnos- I understand it will not improve the quality. I just need to increase the Biz Rate so it is accepted on iTunes Match. Any Biz rate lower than 128, will not be accepted.

Similar Messages

How to determine the bit rate with button over video subtitles?

I have a project where I've got several questions that come up on the screen. The DVD is subtitled in 14 languages, so depending on the language chosen, it will show the question in the proper language along with navigation buttons to go to the next question or track.
The problem is this: I added several new questions that each have a black only video that runs about 1min with 14 subtitle tracks made from photoshop psds. When I try to build, it fails saying "bit rate too high." When I removed all but 5 of the subtitle tracks, then it would build. I came up with a workaround, but then hit the limit of 99 tracks, menus or stories on a DVD.
I went back and tried combining all 3 questions in to one slide, but now with more information on the psd, it will only allow 3 subtitle tracks before it reaches the max bit rate.
How does it determine the bit rate? What can I do to lower the rate? I tried compressing the video at the lowest bitrate, but it didn't' help. I tried changing the psds to much smaller jpg files, but it didn't change anything. If anyone has any suggestions, please let me know!
Thanks.

CS,
Almost all DVD SP Tracks should first be completely constructed in a Sequence in FCP, the markers placed there, and then everything encoded into a single Mpeg 2 clip with matching length audio (even if just low bit rate AC3 silent audio, as the case may be, because all Mpeg 2 clips in the Title domain should be accompanied by an audio stream), and then imported into DVD SP.
Lay your subtitles under that and see what happens.
Take care,
Trai
TFDVD Research Labs

HT201303 How can edit the 3 security question its only two question had shown up?

how to edit 3 security question for my itunes id?

Mary Jane,
See if these suggestions help:
http://support.apple.com/kb/TS1440?viewlocale=en_US
Regards,
Captfred

I have just purchased an iTouch 5th generation and I'm looking to lower the bit rate of my music to 128 because it says I need "4.75 gb" more of space to fit all of my songs. Therefore, I am looking to convert my files. I know how to do that, but

Is there any possible way to simply convert all of my songs to 128 without making a copy? I have over 3,000 songs and I just can't go through 3,000 songs and delete each individually. Please help?

With the iPod connected to you computer go to the Summary pane for the iPod in iTunes and check the box that says: Convert higher bitrate songs to XX AAC. Select 128 kbps for XX.

How can I reduce the bit rate of songs in my Music Library to enable me to

At the moment i can only fit about 1300 songs on my iphone and also have used up half the space on my 120gb Classic with 7000 songs which is a lot less than what i was told would fit on. so............
How can I reduce the bit rate of songs in my Music Library to enable me to fit more songs onto my iPhone or iPod Classic.. and what is the minimum rate that i should stick to in order to retain good sound quality.

For existing tracks, see:
http://support.apple.com/kb/HT1550
For CDs you import in the future, change the Import settings in the iTunes -> General preferences.
As to what will be a good bit rate, that's going to be up to you and what quality you find acceptable, but many people find that 128 kbps AAC is the optimum balance between small file size and quality.

How do I change the bit rate for dls?? How times can I download one song??

I'm new to iTunes. I already downloaded 3 songs when I realized that the default bit rate is 128Kbps. I tried changing the bit rate to 192Kbps with a (Variable Bit Rate) checked.....unfortunately when I downloaded the next 2 songs the bit rate turned out to be the same.
Do I have to restart Windows or iTunes before downloading again?
And now that I have 5 songs with a lower br than I wanted... in order for me to have(download) the song at the higher bit rate...Is it possible to download one song more than once?
Thanx.

You have no choice as to bit rate when purchasing from the iTunes Music Store. The official bit rate of all tracks there is 128 kbps (a very few have been reported to be at higher rates, but that's not a choice you can make, it's how the track was encoded by the record company). The setting in the iTunes Importing preference is for tracks you import from CDs only and has no effect on iTMS purchases.
Is it possible to download one song more than once?
No. Except in extraordinary circumstances, the iTMS allows only one download per purchase.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic before you post a question.
Regards.

How do you know the bit rate of a video clip?

I have video clips from my video camera recorded in MPEG 2, PAL standard definition 720x576. 2 questions:
1. How can I find out what bit rate the video is recorded at?
2. Knowing this, can I in PProCS4 encode this for DVD without any transcoding (assuming, of course, no effects or fades etc have been added)?
I like to keep the coding the same, to avoid the quality loss of transcoding to a different bit rate.
I use 256 kb/s audio in MPEG 1 layer 2 (pretty much standard DVD format).
Any info appreciated.

In Ulead Mediastudio Pro, you can see the data rate of the video, and also in DVD Movie Factory select "do not convert..." etc, where un-edited clips are not transcoded, to give maximum picture quality. I dropped MSP, as Corel (having taken over Ulead) has, sadly' dropped the product, so I bought PProCS4 hoping it would be at least as capable. Alas. Having said that, in most respects PPro is as good or better than MSP, and runs fine on Vista and Win7 beta (which I am using now), so I am still happy I get PPro.

How to download a DVD movie into Premiere Elements 12 using my MacBook Pro so I can edit the video?

How to download a DVD movie into Premiere Elements 12 using my MacBook Pro so I can edit the video?

Bob Perez
Please review and consider the following which works for me in Premiere Elements 12 Window 64 bit.
From what you wrote, I suspect that you have DVD-VIDEO widescreen on DVD disc. For now I will assume that you are working in a NTSC setup.
Premiere Elements DVD-VIDEO on DVD disc is characterized as interlaced video with field order lower (bottom) field first. I am not sure how your DVD-VIDEO on DVD was produced - upper (top) field first or lower (bottom) field first. We may have to apply Field Option Reverse Field Dominance at the Timeline level, but for now let us put that aside for a later time.
Insert your DVD disc in the DVD burner tray.
Open Premiere Elements to the Expert workspace and set the project preset manually for NTSC DV Widescreen. How to details for manual project preset setting are found
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
Then, Add Media/DVD camera or Computer Drive/Video Importer.
The video files from the DVD-VIDEO will be the larger size files and will probably start with VTS_01_1.VOB.
In the Video Importer designate the save location for video file VOB(s) and select Add to Timeline and hit Get Media
to put the files on the Timeline for editing.
If you have more than one DVD disc to "rip", please set up the Video Importer Save In location so that the save in location has a folder for each disc. The fact that all DVDs have the same VTS_01_1.VOB name etc will cause problems if you saved all to the same place as individual files.
Determine how that works for you in your Mac computer environment. We will be watching for your progress.
Others may tell you that you need to convert the VOB to another format before import into Premiere Elements. That is no necessary for Premiere Elements.
Thank you.
ATR

Both of my kids have ipod touch 4. On 1 we can edit the camera roll and delete muptiple pics at once. On the other, we can't edit in camera roll and have to delete each picture one at a time? How do we get edit as an option in camera roll?

Both of my kids have ipod touch 4. On 1 we can edit the camera roll and delete muptiple pics at once. On the other, we can't edit in camera roll and have to delete each picture one at a time? How do we get edit as an option in camera roll?

Hi jenny,
Are you certain that they are both running IOS 6.1.3? Go to Settings>General>About, and check the "Version".
Cheers,
GB

How do yo turn a pdf file into reader so i can edit the form?

how do yo turn a pdf file into reader so i can edit the form?

I have no idea what you are trying to say; your are trying to open a PDF with Reader?

How do I make and keep a copy of a photo in iPhoto so that I can edit the copy and keep the unedited original?

How do I make and keep a copy of a photo in iPhoto (version 9.5.1) so that I can edit the copy and keep the unedited original?

You don't have to. iPhoto does that automatically. Note the command in Photos menu to 'Revert to Original' and the original can be exported at any time using the Export command.
Longer answer:
All edits in iPhoto are virtual. The database records your decisions and then applies them to a copy of the original. So your original is untouched. Your edited version is never "fixed" until you export it.

How can I write bits through the COM1 serial port?

I'm trying to write bits through the serial port COM1.
Labview "Write VI" only writes everything in string. It seems. How can I write bit by bit through COM1?
Thank you,
Van

Serial transmission (COM port) protocol requires sending a group of bits at one time. You cannot just send one bit. Standard COM port settings must be either 7 or 8 data bits, 1 or 2 stop bits, etc... You have to group your bits 7 or 8 at a time. You could probably send a 0 byte or a 1 byte. This would be like sending 0000 0000 for a low bit and 0000 0001 for a high bit. Your receiving end would have to know how to interpret what you are sending if you choose this method. Of course you have to convert your byte into a string before sending to COM port. Wire a U8 data type to a Build Array input. Then wire the array output to a Byte Array to String input. The output of this function will be the character representation of your byte suitable for sending acr
oss a serial port.
- tbob
Inventor of the WORM Global

How do I duplicate a photo in iPhone 5 so I can edit the copy but keep original?

How do I duplicate a photo in iPhone 5 so I can edit the copy but keep original?
I see where it lets me click "Copy" but where in my library do I paste the copy?
Thanks!

This is rather interesting...
I could sweat that in iOS 6. When you click Save it gave you the option to keep a copy of original or just save the new picture in replace of the old.
Now what it does, it saves the "edit" in the file. But when you go to make another change, you can see the original picture still.
At least I did when I cropped it.
KOT

How can change the hair to an image every time and how can save the edit image into albums give me code

HI, I am small iphone developer,i have one problem in my app,please give the guidence to me.
THIS IS MY PROBLEM:
          I HAVE SELECTED ONE PICTURE FROM ALBUMS OR TAKE PICTURE FROM CAM SO I WANT TO CHANGE THE HAIR STYLES PART WITH ANOTHER HAIR STYELS AND SAVE THE PICTURE INTO ALBUMS HOW CAN GENRATE THE CODE OR LOGIC TO ME......I AM TRYING IT FROM 3WEEKS SO COULD YOU PLEASE GIVE ME GUIDENCE TO ME.................

HI, I am small iphone developer,i have one problem in my app,please give the guidence to me.
THIS IS MY PROBLEM:
          I HAVE SELECTED ONE PICTURE FROM ALBUMS OR TAKE PICTURE FROM CAM SO I WANT TO CHANGE THE HAIR STYLES PART WITH ANOTHER HAIR STYELS AND SAVE THE PICTURE INTO ALBUMS HOW CAN GENRATE THE CODE OR LOGIC TO ME......I AM TRYING IT FROM 3WEEKS SO COULD YOU PLEASE GIVE ME GUIDENCE TO ME.................
Sir I am did it by using Objcetive-C code in iphone as fallows
demoprojectViewController.h
#import <UIKit/UIKit.h>
@interface demoprojectViewController : UIViewController<UIImagePickerControllerDelegate,UINavigationControllerDelegate >
    UIImageView *imageView,*editingimage,*maskimage;
     UIButton *takePictureButton;
    UIButton *selectFromCameraRollButton;
    UIView *myview;
@property(nonatomic,retain)IBOutlet UIImageView *imageView;
@property(nonatomic,retain)IBOutlet UIImageView *maskimage;
@property(nonatomic,retain)IBOutlet UIImageView *editingimage;
@property(nonatomic,retain)IBOutlet UIButton *takePictureButton;
@property(nonatomic,retain)IBOutlet UIButton *selectFromCameraRollButton;
@property(nonatomic,retain )IBOutlet UIView *myview;
- (IBAction)getCameraPicture:(id)sender;
- (IBAction)selectExistingPicture;
-(IBAction)pickHair:(id)sender;
-(IBAction)done;
-(IBAction)back;
@end
demoprojectViewController.m
#import "demoprojectViewController.h"
@implementation demoprojectViewController
@synthesize imageView,editingimage,maskimage;
@synthesize takePictureButton;
@synthesize selectFromCameraRollButton;
@synthesize myview;
CGFloat lastScaleFactor = 1;
CGFloat netRotation;
CGPoint netTranslation;
NSArray *images;
int imageIndex = 0;
- (void)didReceiveMemoryWarning
    // Releases the view if it doesn't have a superview.
    [super didReceiveMemoryWarning];
    // Release any cached data, images, etc that aren't in use.
#pragma mark - View lifecycle
// Implement viewDidLoad to do additional setup after loading the view, typically from a nib.
- (void)viewDidLoad
   // maskimage=[[UIImageView alloc]initWithFrame:CGRectMake(50, 50, 150, 150)];
    //maskimage.image=[UIImage imageNamed:@"1.png"];
    if ([UIImagePickerController isSourceTypeAvailable:
          UIImagePickerControllerSourceTypeCamera]) {
        takePictureButton.hidden = NO;
        selectFromCameraRollButton.hidden = NO;
       UITapGestureRecognizer *tapGesture =
        [[UITapGestureRecognizer alloc]
         initWithTarget:self
         action:@selector(handleTapGesture:)];
        tapGesture.numberOfTapsRequired = 1;
        [maskimage addGestureRecognizer:tapGesture];
        [tapGesture release];
        UIPinchGestureRecognizer *pinchGesture =
        [[UIPinchGestureRecognizer alloc]
         initWithTarget:self
         action:@selector(handlePinchGesture:)];
        [maskimage addGestureRecognizer:pinchGesture];
        [pinchGesture release];
        ///---rotate gesture---
        UIRotationGestureRecognizer *rotateGesture =
        [[UIRotationGestureRecognizer alloc]
         initWithTarget:self
         action:@selector(handleRotateGesture:)];
        [maskimage addGestureRecognizer:rotateGesture];
        [rotateGesture release];
        //---pan gesture---
        UIPanGestureRecognizer *panGesture =
        [[UIPanGestureRecognizer alloc]
         initWithTarget:self
         action:@selector(handlePanGesture:)];
        [maskimage addGestureRecognizer:panGesture];
        [panGesture release];
        //---swipe gesture---
        images = [[NSArray alloc] initWithObjects:
                  @"1.png",
                  @"2.png",
                  @"3.png", nil];
        //---right swipe (default)---
        UISwipeGestureRecognizer *swipeGesture =
        [[UISwipeGestureRecognizer alloc]
         initWithTarget:self
         action:@selector(handleSwipeGesture:)];
        [maskimage addGestureRecognizer:swipeGesture];
        [swipeGesture release];
        //---left swipe---
        UISwipeGestureRecognizer *swipeLeftGesture =
        [[UISwipeGestureRecognizer alloc]
         initWithTarget:self
         action:@selector(handleSwipeGesture:)];
        swipeLeftGesture.direction = UISwipeGestureRecognizerDirectionLeft;
        [maskimage addGestureRecognizer:swipeLeftGesture];
        [swipeLeftGesture release];
    [super viewDidLoad];
-(IBAction) handleTapGesture:(UIGestureRecognizer *) sender {
    if (sender.view.contentMode == UIViewContentModeScaleAspectFit)
        sender.view.contentMode = UIViewContentModeCenter;
    else
        sender.view.contentMode = UIViewContentModeScaleAspectFit;
-(IBAction) handlePinchGesture:(UIGestureRecognizer *) sender {
    CGFloat factor = [(UIPinchGestureRecognizer *) sender scale];
    if (factor > 1) {
        //---zooming in---
        sender.view.transform = CGAffineTransformMakeScale(
                                                           lastScaleFactor + (factor-1),
                                                           lastScaleFactor + (factor-1));
    } else {
        //---zooming out---
        sender.view.transform = CGAffineTransformMakeScale(
                                                           lastScaleFactor * factor,
                                                           lastScaleFactor * factor);
    if (sender.state == UIGestureRecognizerStateEnded){
        if (factor > 1) {
            lastScaleFactor += (factor-1);
        } else {
            lastScaleFactor *= factor;
//---handle rotate gesture---
-(IBAction) handleRotateGesture:(UIGestureRecognizer *) sender {
    CGFloat rotation = [(UIRotationGestureRecognizer *) sender rotation];
    CGAffineTransform transform = CGAffineTransformMakeRotation(
                                                                rotation + netRotation);
    sender.view.transform = transform;
    if (sender.state == UIGestureRecognizerStateEnded){
        netRotation += rotation;
//---handle pan gesture---
-(IBAction) handlePanGesture:(UIGestureRecognizer *) sender {
    CGPoint translation =
    [(UIPanGestureRecognizer *) sender translationInView:maskimage];
    sender.view.transform = CGAffineTransformMakeTranslation(
                                                             netTranslation.x + translation.x,
                                                             netTranslation.y + translation.y);
    if (sender.state == UIGestureRecognizerStateEnded){
        netTranslation.x += translation.x;
        netTranslation.y += translation.y;
-(IBAction) handleSwipeGesture:(UIGestureRecognizer *) sender {
    UISwipeGestureRecognizerDirection direction =
    [(UISwipeGestureRecognizer *) sender direction];
    switch (direction) {
        case UISwipeGestureRecognizerDirectionUp:
            NSLog(@"up");
            break;
        case UISwipeGestureRecognizerDirectionDown:
            NSLog(@"down");
            break;
        case UISwipeGestureRecognizerDirectionLeft:
            imageIndex++;
            break;
        case UISwipeGestureRecognizerDirectionRight:
            imageIndex -- ;
            break;
        default:
            break;
    imageIndex = (imageIndex < 0) ? ([images count] - 1):
    imageIndex % [images count];
    imageView.image = [UIImage imageNamed:
                       [images objectAtIndex:imageIndex]];
#pragma mark -
- (IBAction)getCameraPicture:(id)sender {
    UIImagePickerController *picker =
    [[UIImagePickerController alloc] init];
    picker.delegate = self;
    //picker.allowsImageEditing = YES;
    picker.sourceType = (sender == takePictureButton) ?
    UIImagePickerControllerSourceTypeCamera :
    UIImagePickerControllerSourceTypeSavedPhotosAlbum;
    [self presentModalViewController:picker animated:YES];
    [maskimage removeFromSuperview];
    [picker release];
- (IBAction)selectExistingPicture {
    if ([UIImagePickerController isSourceTypeAvailable:
         UIImagePickerControllerSourceTypePhotoLibrary]) {
        UIImagePickerController *picker =
        [[UIImagePickerController alloc] init];
        picker.delegate = self;
        picker.sourceType = UIImagePickerControllerSourceTypePhotoLibrary;
        [self presentModalViewController:picker animated:YES];
        [maskimage removeFromSuperview];
        [picker release];
    else {
        UIAlertView *alert = [[UIAlertView alloc]
                              initWithTitle:@"Error accessing photo library"
                              message:@"Device does not support a photo library"
                              delegate:nil
                              cancelButtonTitle:@"Drat!"
                              otherButtonTitles:nil];
        [alert show];
        [alert release];
#pragma mark -
- (void)imagePickerController:(UIImagePickerController *)picker
        didFinishPickingImage:(UIImage *)image
                  editingInfo:(NSDictionary *)editingInfo {
    imageView.image = image;
    [picker dismissModalViewControllerAnimated:YES];
- (void)imagePickerControllerDidCancel:(UIImagePickerController *)picker {
    [picker dismissModalViewControllerAnimated:YES];
- (IBAction)btnSave_Clicked:(id)sender;
    UIImageWriteToSavedPhotosAlbum(editingimage.image, nil, nil, nil);
    //UIImageWriteToSavedPhotosAlbum(imageView.image, nil, nil, nil);
    UIAlertView *alert = [[UIAlertView alloc]initWithTitle:@"Success" message:@"Image saved successfully to iPhone photo albums..." delegate:nil cancelButtonTitle:@"Ok" otherButtonTitles:nil];
    [alert show];
    [alert release];
-(IBAction)pickHair:(id)sender;
       //[maskimage setMultipleTouchEnabled:YES];
   // [maskimage setUserInteractionEnabled:YES];
    //[maskimage setContentMode:UIViewContentModeScaleAspectFit];
    maskimage.image=[UIImage imageNamed:@"1.png"];
    [imageView addSubview:maskimage];
-(IBAction)done
    NSLog(@"hiafjdkfj");
    UIGraphicsBeginImageContext(imageView.image.size);
    CGRect rect1 = CGRectMake(netTranslation.x,netTranslation.y,maskimage.image.size.width , maskimage.image.size.height);
    CGRect rect = CGRectMake(0, 0, imageView.image.size.width, imageView.image.size.height);
    [imageView.image drawInRect:rect];
    [maskimage.image drawInRect:rect1];
    UIImage *resultingImage = UIGraphicsGetImageFromCurrentImageContext();
    UIGraphicsEndImageContext();
    [editingimage setImage:resultingImage];
    [myview addSubview:editingimage];
    [self.view addSubview:myview];
-(IBAction)back
    [myview removeFromSuperview];
    //[editingimage removeFromSuperview];
-(void) touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event {
    UITouch *touch = [[event allTouches] anyObject];
    CGPoint location = [touch locationInView:touch.view];
    maskimage.center = location;
-(void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event {
    [self touchesBegan:touches withEvent:event];
- (void)viewDidUnload
    self.imageView = nil;
    self.maskimage=nil;
    self.takePictureButton = nil;
    self.selectFromCameraRollButton = nil;
    [super viewDidUnload];
    // Release any retained subviews of the main view.
    // e.g. self.myOutlet = nil;
- (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceO rientation
    // Return YES for supported orientations
    return (interfaceOrientation == UIInterfaceOrientationPortrait);
- (void)dealloc {
    [imageView release];
    [images release];
    [takePictureButton release];
    [selectFromCameraRollButton release];
    [super dealloc];
@end
but i can not put the hair to the proper place means on edit image when am saving the image please help meee

Can I tweak the bit rate for iPod video?

I am starting to produce quite a bit of iPod video for podcasting. Some of our newer pieces are up to 2 hours long and I want to cut the bit rate back so that the files aren't so large. There does not seem to be a way to tweak the m4v parameters in Final Cut Pro or Quicktime Pro. I was able to make an mp4 video file with what a I wanted. It worked in iTunes but the iPod would not recognize it. Is there anyway to tweak the bitrate when making a video for iPod?

Is there anyway to tweak the bitrate when making a video for iPod?To exercise the greatest amount of control, use MPEG Streamclip (free). The MPEG-4 iPod presets can be user modified to limit data rates as desired.
I was able to make an mp4 video file with what a I wanted. It worked in iTunes but the iPod would not recognize it.The "Movie to MPEG-4" exports are limited to the 320 x 240 "Baseline" profile (up to v1.3).
There does not seem to be a way to tweak the m4v parameters in Final Cut Pro or Quicktime Pro.The "Movie to iPod" export is adaptively pre-set for maximum "LC" (640 x 480) and "Baseline" (320 x 240) data rates. There are no manual adjustments.

How can edit the Bit Rate on my music?

Similar Messages

Maybe you are looking for