How can get batch number in process order?(T-code: COR1, COR2)

Please tell me step by step process it will be better to me the solve my issue.
When End-user uses alread existed batch number,
Pop-up Message,
"Your batch number is already exist.
Are you creating new batch number?"
If the answer is "No",
System still uses that batch number.
And User-Exits, or bodies don't exist this time.
How can I get this batch number When saving in process order?
I uses User-Exits "SAPLV1ZE" in Batch Number Check,
"PPCO0007" and "PPCO0001" in saving process order.
I know "PPCO0001" has all information about process order,
but I can't get batch number to "PPCO0007" From "PPCO0001" by using Memory ID.
Cause PPCO0007 happens before PPCO0001.
(ref. PPCO0007 can stop saving in process order.)
I want to know how can I get batch number when pop-up message's answer is "No".
I have to send this batch number to PPCO0007 by using Memory ID.
Please, help me.
Edited by: Jamie White 99 on Mar 15, 2010 11:00 AM

Dear,
Could you please clear your requirement in brief?
You don't want to use the existing batch number or want to assign external batch number or want unique batch number?
Use SAPLV1ZE and EXIT_SAPLV01Z_003 where you can replace the proposed number range with external interval defined by yourself.Also using EXIT_SAPLV01Z_004 you can define your own checking rule.
Further information can be obtained from the documentation on the enhancements
Also refer this link,
http://help.sap.com/saphelp_40b/helpdata/ru/dc/1d4b6e5733d1118b3f0060b03ca329/content.htm
Re: External batch assignment( Manual)
Regards,
R.Brahmankar

Similar Messages

How to get Line Number in Purchase Order

Hi Experts
I want to get Line Number of Matrix of Purchase Order. How I get it ?
I want to compare Matrix Line Number with Line Number of POR1 in DB.
Please Help me.
Hepil Doshi

Hi Hepil,
Linenum in Matrix "38" is Columns.Item("110").Value
SBO application doesnot show it, but you can get the linenum from that column.
You can test by getting the column title. omatrix.columns.item("110").Title
Hope it helps.
Regards
Edy

Assign batch number from sale order to production order automatic

Dear all, I have a question for all. Please help me in this case
My scenario is make to order
I have a sale order, when i create sale order, i have assigned batch number at each line item.
When i run MRP for sale order (MD50), the system generate a planned order for it and I've converted to production order.
So when I view production order, I think that batch number what I've assigned to sale order will be assign to production order but that is not happen.
So, can you help me solve this problem. I think that sap can assign batch number from sale order to production order automatic but i don't know how to configure that
Thanks all

Hi,
To the best of my knowledge, when system is generating planned order / production order from sales order system doesnt copy batch number from sales order.
In fact , you are following wrong practice for generating batch no.
Follow procedure like this :
Create sales order without any batch assigning there. Run MRP with MD50 and then convert planned order to Production Order.
While creation / releasing of Production order, you have option to generate batch automatically by following way :
Go to OPKP (Production Scheduling Profile) -> Take your plant & give suitable name to Production scheduling profile-> Batch Management tab -
> Automatic Batch creation in the order maintain this field as
1 Automatic batch creation at order creation
or
2 Autom. batch creation at order release
This will generate batch number automatically at the time of creation or release of order.
Then follow same process i.e. Goods Issue, Confirmation & GR for production order.
So you will get sales order stock in the form of batch managed.
Check & revert if any issue in above flow.
Regards,
Tejas

My iphones was stolen on friday how can get my contacts back or is there any way i can track it? i cant find my imea number.

My iphones was stolen on friday how can get my contacts back or is there any way i can track it? i cant find my imea number.

The only way to locate/disable/erase any lost/stolen iPhone/iPod Touch is through Find My Phone or a similar app. However, this requires that Find My Phone be setup/activated, on your phone, before it was lost/stolen. You would then login at iCloud.com & try to locate it. This requires the phone be turned on & have an Internet connection. There is no other way to locate a lost/stolen iPhone. Apple can't/won't help you, nor will your carrier. Report the loss to the Police, your carrier & Insurance company. Change all of your passwords, especially your Apple ID/iCloud password NOW!
If your carrier offers Blacklisting & they Blacklist the phone, it will be unusable as a phone.
If locked with a passcode, and running iOS 7.0, then phone cannot be activated or the passcode removed without knowing your Apple iD/Password. It will be nothing but a useless paperweight.
If not running iOS 7.0, the phone can be forced into recovery mode & restored.
Your carrier has a record of your IMEI number. Also read here:
http://support.apple.com/kb/ht4061

How canI get my serial number for Elements 11?

How canI get my serial number for Elements 11? Does anyone know how to help me. I did puchase it sometime ago but lost all computer data and had to replace computer. Hope someone can help.
Thanks
Steve

If you have no record of it at your end, the only place you might find it is at Adobe's end via logging into your Adobe account and seeing if it is listed there. If you registered the software it should be.
Beyond that your only hope might be to have Adobe support check your information to see if the software/serial number is available and if it can be given to you. Try contacting them by chat or telephone.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

How to release batch number that's allocated in a "closed' sales order

Hi,
Does anyone knows how to release batch number that's allocated in a "closed" sales order? I'm using SAP B1 2005B PL42.
This batch number 'A' was allocated in the sales order. However, when this sales order is copied to multiple delivery orders, one of the delivery order's batch number is changed to another batch number 'B'. The sales order had changed status to "closed" as full quantity is copied to Delivery orders. But from the batch number trans. report, the remaining quantity of batch number A is still "allocated" (I think due to bug in SAP B1) although the sales order is closed.
Please help. Thanks!
regards,
sianghing

Hi Suda,
Thanks for reply. But I realize that batch number allocation in sales order is a hard allocation. We cannot use batch number quantity allocated in that closed sales order into another Sales Order or Delivery Order anymore.
Thanks,

I lost my phone.i have only the serial number .how i can get imei number with it???

i lost my phone.i have only the serial number .how i can get imei number with it???

Call your carrier, they have a record of your IMEI number. Or, read here:
http://support.apple.com/kb/ht4061

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
Thanks for any suggestions.

I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
Now I am back on my Mac. I meant the following: Batch Change the date for a large range of photos, that should have a date stepped in increments.
Select all Photos at once and use the command "Photos > Batch Change".
Then set the date for the first photo and select an increment, e.g. one minute.
Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date. This way it will be unnecessary to change the titles or filenames.

Map BATCH number corresponding to ORDER number and Material number .

hi all,
i want to map the BATCH number corresponding to Material Number .
i searched tables MCHA which has two fields Material number and Batch number but it doenot have Order number.
so how can i get Batch number as in table AFPO/AFKO i have all these three fields batch/material/order numbers.
but the batch number column is blank for all .
and in case of table MCHA , these is assigned batch number to every Material number .
also i want to ask , either the Material number in both tables (MCHA AND AFPO) is same or different as i didnot found any relation to map these three field by other fields too.
so please suggest me the Possible way to resolve this .....
sunny

hi dsk,
thanks for your earliar reply,
actually iam working on sapscript there i want to add batch number ,but i am not able to clear my doubt from where i get this.
how can i map batch number with corresponding to PO num ber, '
in the report i used structure vbplp with field charg"(batch num).
also i want to know from which table i can get customer part number and Po number .
how can i add batch num ,..
from which table or with which field i can compare itr to get .
sunny

How can find out update on my order online

how can you find out if your order been update at all and you the same message on their page and no change is there some way of get hold of some on online here

here what its say on the page
ORDER STATUS
Order Date:
12/16/2014
Order Number:
I leave it blank
Order Status:
Your order is processing. Your shipping details will be available soon.
Tracking Number:
and that what has said since I place the order and their been no update and the order number I will not post here if you want I post in private to you

How to get Changed fields in Sales order to create a report

Dear Gurus,
How to get the log from sales order for the change of particular field.
In my scenario, If an user remove the delivery block from sales order I want to capture the date on which this delivery block
is removed and by whom (User)?
I know that I can get the log of change but can I get in the form of field updates because further I want to use that date and user name to create a report.
I hope u got my query. Please reply soon that I can create a report.
Thanks in advance.
regards,
Sanjay

Hi
You can use the table CDPOS for tracking the changes at the Table level with the Sales order number
or Else you can also use AUT10 transaction to track the logs/chanages with START DATE, END DATE and the Transaction code in your case it is VA02
Please check and revert back
regards,
santosh

Issues during Component Batch Determination for Process Orders

Hi,
I am encountering a strange issue during component batch determination of process order.
1. During creation of process order, when I execute batch determination, systems does determination based on strategies we have set and when I click on Copy it gives an error
"Log cannot be saved: Object/subobject not specified"
Message no. BL201
*Diagnosis
Log save cancelled because at least one log contains no object or subobject.
Object and subobject are needed to classify application logs because there are several log types. Only a few logs are managed in main memory at runtime, so this classification is not needed.
If the logs are to be saved in the database, object/subobject must be specified for later retrieval.
Procedure for System Administration
Object/sub object can be passed when a log is created (function module BAL_LOG_CREATE) and changed with BAL_LOG_CHANGE.
The possible values for object and sub object must be configured in transaction SLG0.*
If I save the order with CRTD status and come back again in change mode and do determination, It works fine.
Again when the order is in REL status and do the determination, It gives the same error.
This happens only for a specific plant, In other plants batch determination works in all scenarios.
I checked for all plant related Config for batch determination and coudn't find any discrepancies.
Please advise how to resolve this issue. Thanks in advance for your help
Regards,
Aheesh

There Is no direct solution for your requirement just try this work around.
While defining the batch determination search strategy for process order in COB1, there is one column Quantity proposal where you can attach the Routines (This is written in ABAB code ) make use of this, define New Routines with ABAB help to fulfill your requirement. Try this if found useful award full points.
Regards,
Ajay Nikte

How to get total number of result count for particular key on cluster

Hi-
My application requirement is client side require only limited number of data for 'Search Key' form total records found in cluster. Also i need 'total number of result count' for that key present on the custer.
To get subset of record i'm using IndexAwarefilter and returning only limited set each individual node. though i get total number of records present on the individual node, it is not possible to return this count to client form IndexAwarefilter (filter return only Binary set).
Is there anyway i can get this number (total result size) on client side without returning whole chunk of data?
Thanks in advance.
Prashant

user11100190 wrote:
Hi,
Thanks for suggesting a soultion, it works well.
But apart from the count (cardinality), the client also expects the actual results. In this case, it seems that the filter will be executed twice (once for counting, then once again for generating actual resultset)
Actually, we need to perform the paging. In order to achieve paging in efficient manner we need that filter returns only the PAGESIZE records and it also returns the total 'count' that meets the criteria.
If you want to do paging, you can use the LimitFilter class.
If you want to have paging AND total number of results, then at the moment you have to use two passes if you want to use out-of-the-box features because LimitFilter does not return the total number of results (which by the way may change between two page retrieval).
What we currently do is, the filter puts the total count in a static variable and but returns only the first N records. The aggregator then clubs these info into a single list and returns to the client. (The List returned by aggregator contains a special entry representing the count).
This is not really a good idea because if you have more than one user doing this operation then you will have problems storing more than one values in a single static variable and you used a cache service with a thread-pool (thread-count set to larger than one).
We assume that the aggregator will execute immediately after the filter on the same node, this way aggregator will always read the count set by the filter.
You can't assume this if you have multiple client threads doing the same kind of filtering operation and you have a thread-pool configured for the cache service.
Please tell us if our approach will always work, and whether it will be efficient as compared to using Count class which requires executing filter twice.
No it won't if you used a thread-pool. Also, it might happen that Coherence will execute the filtering and the aggregation from the same client thread multiple times on the same node if some partitions were newly moved to the node which already executed the filtering+aggregation once. I don't know anything which would even prevent this being executed on a separate thread concurrently.
The following solution may be working, but I can't fully recommend it as it may leak memory depending on how exactly the filtering and aggregation is implemented (if it is possible that a filtering pass is done but the corresponding aggregation is not executed on the node because of some partitions moved away).
At sending the cache.aggregate(Filter, EntryAggregator) call you should specify a unique key for each such filtering operation to both the filter and the aggregator.
On the storage node you should have a static HashMap.
The filter should do the following two steps while being synchronized on the HashMap.
1. Ensure that a ConcurrentLinkedQueue object exists in a HashMap keyed by that unique key, and
2. Enqueue the total number count you want to pass to the aggregator into that queue.
The parallel aggregator should do the following two steps while being synchronized on the HashMap.
1. Dequeue a single element from the queue, and return it as a partial total count.
2. If the queue is now empty, then remove it from the HashMap.
The parallel aggregator should return the popped number as a partial total count as part of the partial result.
The client side of the parallel aware aggregator should sum the total counts in the partial result.
Since the enqueueing and dequeueing may be interleaved from multiple threads, it may be possible that the partial total count returned in a result does not correspond to the data in the partial result, so you should not base anything on that assumption.
Once again, that approach may leak memory based on how Coherence is internally implemented, so I can't recommend this approach but it may work.
Another thought is that since returning entire cached values from an aggregation is more expensive than filtering (you have to deserialize and reserialize objects), you may still be better off by running a separate count and filter pass from the client, since for that you may not need to deserialize entries at all, so the cost on the server may be lower.
Best regards,
Robert

How can I batch inventory control via attributes?

How can I batch enable the "keep stock" feature for attributes? How can batch set inventory levels based on inventory after I have enabled "keep stock"?

You will likely get better program help in a program forum
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Batch Determination in process orders

Hi All,
This is regarding batch determination in Process Orders. We have components which are batch managed. When we do a batch determination system shows up old batches qty in available qty field in batch determination which were already consumed for different process orders.When checked in stock overview (MMBE) there was no stock available for this material.
Can you please explain me how the batch detmination in done in the system. Why is the system looking for old batches for which there is no stock available.
Kindly reply to the mail.

Hi
Pl follow the below path and transection and check the settings..if missing pl make necessary settings
Batch management> Batch serach procedure allocation and check activation
T.Code to be looked specifically <b>OMCG , CORC</b>
Pl reward if this is helpful or come back if you need another help
BR
Sumit

How can get batch number in process order?(T-code: COR1, COR2)

Similar Messages

Maybe you are looking for