How can have the name of report server

Hi,
There is a method or a statement to obtain the name of the report server, in order to use it a script?
Thank You.
Gretings....
Gaetano

the name of report serverAs in Oracle Reports? If so you should use Reports as that's where you are most likely to find people with the requisite domain expertise.
Cheers, APC
Blog : http://radiofreetooting.blogspot.com/

Similar Messages

How to have the name of code PL/SQL

I make a generique tools for logging in PL/SQL : http://log4plsql.sourceforge.net/
1. how to have the name of the code PL/SQL which is run ?
2. how have a pl/sql call stack dynamically ?
proc1 -> proc2 -> package1.proc3

For 2, check if DBMS_UTILITY.FORMAT_CALL_STACK will work for you:
http://tahiti.oracle.com/pls/db901/db901.tabbed?section=32613
For 1, is there anything in DBMS_DEBUG that would help?
http://otn.oracle.com/docs/products/oracle9i/doc_library/901_doc/appdev.901/a89852/dbms_deb.htm#1015019

I wonder if my company can have the name of the apple. to sell everything that Apple may offer for the Brazilian people, Para. Respond to my email please

I wonder if my company can have the name of the apple. to sell everything that Apple may offer for the Brazilian people, Para. Respond to my email please

This is a user to user forum: no-one on here works for Apple and consequently no-one on here can help you.
If you want to become an 'Apple Approved' retailer you will have to contact them directly: start at the 'Contact Us' link at the bottom right-hand corner of this page.

PFRD 11.1.1.4 - How to stop the In-process Reports Server

I'm running an "out-of-the-box" PFRD 11.1.1.4 installation in Windows XP SP3.
According with documentation:
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt006.htm#BEHDJFHD
To directly start or stop the in-process Reports Server using a URL, enter the following in your Web browser:
http://machine_name:port/reports/rwservlet/startserver
http://machine_name:port/reports/rwservlet/stopserver
startserver works.
stopserver returns:
REP-50171 : Authentication failed.
Tried
http://machine_name:port/reports/rwservlet/stopserver?authid=weblogic/passwd
same error.
Commented the line:

in rwserver.conf.
Same error.
The only uncomented elements in "rwservlet.properties" (original configuration) are
<server>rep_wls_reports_pfurtado-lap_asinst_1</server>
<singlesignon>no</singlesignon>
<inprocess>yes</inprocess>
Did any of you managed to stop "in-process" reports server using the reports servlet?
What credentials did you use?
Thanks & Best Regards
Paulo

Thanks RZ!
The line you mentioned was already as you described.
According with the documentation:
[Starting and Stopping Reports Server|http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt001.htm#i1005629]
If Reports Server is running as an in-process server through the Reports Servlet, issue the following URL:
http://your_host_name:port_number/reports/rwservlet/stopserver?authid=admin user/admin password
Note:
authid is Reports Server's administration user name and password. In Oracle Reports 11g Release 1 (11.1.1), the default security is based on standards-based Java EE security model through Oracle Platform Security Services. For a non-secure Reports Server, this user is defined in the identifier element.
I added the identifier element to rwserver.conf and restarted WLS_REPORTS, but after this the in-process reports server failed to start with the usual generic exception.
I finally found the missing step in:
How To Secure Showjobs Web Command In A Non Secured Reports Server In Oracle Report 11g? (Doc ID 1242614.1)
The thing is that the identifier element has to be placed in the right location inside rwserver.conf:
The needed change is:
FROM
<queue maxQueueSize="1000"/>
<pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
TO
<queue maxQueueSize="1000"/>
<identifier encrypted="no">....type here your user/password....</identifier>
<pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
So although using the default non-secure reports server, the identifier element has to be present in rwserver.conf for rwservlet/stopserver to work as described above.
Otherwise the needed authentication will fail as described.
Regards
Paulo

How to find the jobs in reports server queue

Hi All,
I am using oracle forms & reports 10g and Oracle application server is 10g.
Here we have 100 reports servers, so using this URL we can able to find a particular report server.
http://dhabiapp1.dof.ae:8080/reports/rwservlet/showjobs?server=auh_1
Is there any possibilities to find all the reports server in a single page.
Thanks & Regards
Srikkanth.M

Hi ccortez,
Thanks for you reply.
I have executed the command and its listing all the report servers, but my requirement is to list all the reports server with queue. Is there any possibilities from the front end screen to see all the report server in a single screen.
Thanks & Regards
Srikkanth.M

How to map the all forms/reports server?

Hi all,
in our environment we are having 5 windows (o/s)forms server the problem is for everytime if we deploy
a new forms and reports we need it deploy it on all servers. some times we might not deploy in one node . so it would been a problem for us. so is there anyway to do it automatized like if i deploy it one node immediately it ll reflect all the rest nodes in one shot (to avoid the deploy in all nodes)
first we have to stop the services
second we have to deploy in one node and needs to be reflect in all nodes
third start the services in one nodes (it ll reflect in all nodes)
Do u have any idea about this. pls share it
Thanks in advance
Regards
Murali...

Hi ccortez,
Thanks for you reply.
I have executed the command and its listing all the report servers, but my requirement is to list all the reports server with queue. Is there any possibilities from the front end screen to see all the report server in a single screen.
Thanks & Regards
Srikkanth.M

9I: How can get the names of all objects in a package header? [RESOLVED]

Is there a way to get the names fo all objects (function, procedures) from package header
select * from user_objects only gives the the header name, I need the object in the header.
John
Message was edited by:
johnminkjan

Here is an example with dbms_output package!
SQL> select owner, object_name,procedure_name from all_procedures
2 where object_name='DBMS_OUTPUT';
OWNER                          OBJECT_NAME                    PROCEDURE_NAME
SYS                            DBMS_OUTPUT                    GET_LINES
SYS                            DBMS_OUTPUT                    GET_LINE
SYS                            DBMS_OUTPUT                    NEW_LINE
SYS                            DBMS_OUTPUT                    PUT_LINE
SYS                            DBMS_OUTPUT                    PUT_LINE
SYS                            DBMS_OUTPUT                    PUT
SYS                            DBMS_OUTPUT                    PUT
SYS                            DBMS_OUTPUT                    DISABLE
SYS                            DBMS_OUTPUT                    ENABLE
9 rows selected.
"or"
SQL> desc dbms_output

How can have the cost of a Medical service with SAP EHS (OH)?

Hello,
I am starting with SAP PLM and/or SAP GRC, working with the Solution SAP EHS and his component OH (Occupancy Heath) and my client ask me if they can see all the costs:
-Cost of medical Service (Doctor cost, Drugs, Medicine Materilas, etc..).
-Cost of Laboratory test.
-All the cost regarding EHS-OH.
So with the transaction "EHSSERV" I don´t see the integration with SAP FI or SAP CO, I don´t know how make the procurament of this medical service with SAP EHS or how integrated this medical service with the SAP SD or MM in order to Sell a medical service or buy a Laboratory test.
1.-SAP EHS give me an Standar report of that, or I need do it in other module of SAP, maby SAP FI or SAP BI?
2.-What level of Cost detail, can I have with SAP EHS.
3.-What I need to do this?
Thanks Experts.
Alejandro González Spencer.

Hi ,
There is no Integration with the SAP-OH component (Occupational Health)
you can mention cost in Text for your record.
Rahul.

How to list the name of recipient in Sent mail folder

In the Gmail folder in Mail, is a Sent Mail folder. It lists FROM, SUBJECT, and DATE RECEIVED. My wife is the only account using the Mail appl. She would like to know how to have the name of the mail recipient listed, rather than her name as the sender since she already knows that info.
Thanks.
Jerry

Jerry,
That should happen automatically in Mail.
Click the Gmail Sent folder. Where the names of the columns is displayed, there should be a dot next to the first column name. Right-click or control-click to get the menu. Click to check To. If you don't want to see From bring up the menu again and click it to uncheck.
Done.
-Wayne
Message was edited by: ParentalUnit

Hello!!!how can I control an omron plc (sysmac cqm1)with an OPC server?I want to adquire a signal controlling its amplitude and frecuency.How can it be done with OPC server?I already have the NI CD of OPC drivers.Thank you

Hello!!!how can I control an omron plc (sysmac cqm1)with an OPC server?I want to adquire a signal controlling its amplitude and frecuency.How can it be done with OPC server?I already have the NI CD of OPC drivers.Thank you

Hola Jose David, que OPC estas utilizando?, Si tienes comunicación entre tu computadora y PLC pero falla la comunicación entre el OPC y el PLC? La configuración y direcciones entre los dos es correcta? La comunicación es por cable serial?
Espero tus respuestas
Saludos
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

Can anyone tell me how to change the names of the networks I have set up on Airport Express

Can anyone tell me how to change the names of the networks I have set up on Airport Express please? I now work in a UN compound and my network is my own name, would prefer some anonymity so seeking to change the wifi network name that others might see.

Hi mkl1961,
Happy Holidays! The article below will explain how to reset your Airport Express and change the network and base station names back to their defaults.
Resetting an AirPort base station FAQ - Apple Support
http://support.apple.com/en-us/HT3728
What default settings will my AirPort base station have after a hard or factory default reset?
AirPort base stations are set to request an IP address by DHCP.
AirPort base station passwords are "public."
AirPort base station names revert to "base station xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
AirPort base station network names are "Apple Network xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
*A MAC (Media Access Control) address, also known as a "network ID," is a unique hardware identification number for a network port. You can find the wireless and Ethernet network IDs on the printed label on the bottom or side of the device.
Airport Express Setup Guide
manuals.info.apple.com/MANUALS/1000/MA1613/en_US/airport_express_80211n_2nd_gen _setup_guide.pdf
I hope this information helps ....
- Judy

How can run the report SAP_INFOCUBE_DESIGN?

hI gURUS
To know about the DIM Table size
How can run the report SAP_INFOCUBE_DESIGN?
Thanks
Cheers
Durai

Function (se37):
RSDEW_INFOCUBE_DESIGNS
Try to see/run this function in order
to get statistic about one InfoCube
How to determine the size of DIM?
From this Function u can determine
how many rows in DIM u have.
After this u can determine size of DIM table:
ROWS * (How many Bytes are in one row) = Size of table.
In order to determine how many Bytes are in one row,
u can see transaction se11 -> Database table -> Tabkle name of DIM -> Display -> Fields -> just add the length*Bytes for all fields in this table.
BR

I cant upload through muse's uploaed to ftp host. And it is so slow! I have the correct password, ftp server, and user name frustrating!!

I cant upload through muse's uploaed to ftp host. And it is so slow! I have the correct password, ftp server, and user name frustrating!!

What version of Muse are you using? If it's not 2014.2, please go to the Creative Cloud Desktop App or creative.adobe.com and update.
The FTP login failure is most likely due to your host not supporting FTP Extended Passive Mode. In Muse 2014.2 switch to "Passive (PASV)" in the Connect to FTP Server dialog.
Regarding performance, how large is your site (in pages and megabytes)? How many Design view tabs are open? What specific operations are slow?
If you'd like to send your .muse file, I'll take a look and attempt to isolate the cause of slow performance. Please send me the .muse file at [email protected] along with a link to this thread. If the file is larger than 20Mb you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. Thanks.

How to debug a form (servlet) in the Forms and Reports Server

Hi:
I have a new install of an application that ran perfectly on a different host using the Forms and Reports Server.
I have installed the FRS on the new host and it is working fine. I can run the test form.
When I run my actual forms app, I only get a blank screen in the browser and on the status bar it reports "Applet Started'.
Is there a way I can turn on debugging or something so I can see at what point it is failing or why the form is not opening properly?
Any advise would be appreciated.
Many thanks.
Bruce

Thanks for the reply Frank. I have looked all through the Start menu but see no "Configuration and Migration". I assume it's because I only installed the Forms and Reports option, so I only have Forms Services, Reports Services, and the Universal Installer. No big deal - I've already setup tnsnames manually. I just like to use the Net Assistant when I can.

What is the use of control breaks in reoprts?how can we use them in report?

hello all
what is the use of control breaks in reoprts? and how can we use them in reports?

hi,
check this sample program using control break statements.
*& Report Y777_CBSTABLE
REPORT Y777_CBSTABLE1.
TYPES:
BEGIN OF S_MARKS,
     ROLLNO    TYPE I,
     SCODE(3) TYPE C,
    ROLLNO    TYPE I,
     SNAME(10) TYPE C,
     MARKS     TYPE I,
END OF S_MARKS.
DATA : C TYPE I,
       D(3) TYPE C,
       TOT TYPE I,
       STU TYPE I,
       MARKS TYPE STANDARD TABLE OF S_MARKS,
       WA_MARKS TYPE S_MARKS.
WA_MARKS-ROLLNO = 1.
WA_MARKS-SCODE = 'MAT'.
WA_MARKS-SNAME = 'MATHS'.
WA_MARKS-MARKS = 65.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 1.
WA_MARKS-SCODE = 'SCI'.
WA_MARKS-SNAME = 'SCIENCE'.
WA_MARKS-MARKS = 85.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 1.
WA_MARKS-SCODE = 'COM'.
WA_MARKS-SNAME = 'COMPUTER'.
WA_MARKS-MARKS = 90.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 2.
WA_MARKS-SCODE = 'MAT'.
WA_MARKS-SNAME = 'MATHS'.
WA_MARKS-MARKS = 55.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 2.
WA_MARKS-SCODE = 'SCI'.
WA_MARKS-SNAME = 'SCIENCE'.
WA_MARKS-MARKS = 75.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 2.
WA_MARKS-SCODE = 'COM'.
WA_MARKS-SNAME = 'COMPUTER'.
WA_MARKS-MARKS = 80.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
RETRIVAL ************************************
SORT MARKS BY SCODE .
LOOP AT MARKS INTO WA_MARKS.
    AT FIRST .
       ULINE.
       FORMAT COLOR 6 ON.
       WRITE:/ 'SUBJECT CODE', 65 ' ' .
       FORMAT RESET.
       FORMAT COLOR 6 ON INTENSIFIED OFF.
       WRITE:/20 'ROLL NO',
              40 'SUBJECT NAME',
              55 'MARKS',
              65 ' '.
       FORMAT RESET.
       ULINE.
    ENDAT.
    ON CHANGE OF WA_MARKS-SCODE.
       IF SY-TABIX NE 1.
           NEW-LINE.
           ULINE 40(25).
           FORMAT COLOR 5 ON INVERSE ON INTENSIFIED ON.
           TOT = TOT / STU.
           WRITE:/40 'AVERAGE MARKS =', TOT.
           FORMAT RESET.
           CLEAR TOT.
           CLEAR STU.
       ENDIF.
      FORMAT COLOR 6 ON INTENSIFIED ON.
      WRITE:/ WA_MARKS-SCODE.
      FORMAT RESET.
    ENDON.
    FORMAT COLOR 6 ON INTENSIFIED OFF.
    WRITE:/20 WA_MARKS-ROLLNO,
           40 WA_MARKS-SNAME,
           55 WA_MARKS-MARKS,
           65 ' '.
    FORMAT RESET.
    STU = STU + 1.
    TOT = TOT + WA_MARKS-MARKS.
    C = STU.
    AT LAST.
           NEW-LINE.
           ULINE 40(25).
           FORMAT COLOR 5 ON INVERSE ON INTENSIFIED ON.
           TOT = TOT / STU.
           WRITE:/40 'AVERAGE MARKS =', TOT.
           FORMAT RESET.
           CLEAR TOT.
           CLEAR STU.
         ULINE.
         FORMAT COLOR 6 ON INVERSE ON INTENSIFIED ON.
         WRITE:/ ' TOTAL STUDENTS : ', C.
         FORMAT RESET.
    ENDAT.
ENDLOOP.
reward points if hlpful.

How can have the name of report server

Similar Messages

Maybe you are looking for