How Can Hide The File Name in URL Using Jsp
I Want source code for Hiding The File name in url address using jsp.
for example www.website/login.jsp is view but i want www.website/ only.
Hi Praveen - how does that DEF would be determined?
Have a look at the below blog for executing os commands
SAP XI File Adapter OS Command Line Feature - Process Integration - SCN Wiki
XI/PI: Command line sample functions
Is there any problem in using the dynamic file name configuration??
Message was edited by: Hareesh Gampa
Similar Messages
-
how to hide the file name (the bizarre number assigned by the camera) when exporting an image version in aperture from an album. Pl understand I want to keep the file name in the project library version.
Within Aperture you have Images, which are constructed on-the-fly from two files (the Master and the Version). You get an image-format file _only_ when you export an Image. You select the file name (usually a scheme) when you create an image-format file (that is, when you export). Look under "Aperture→Presets→File Naming" for built-in Presets. You can, of course, create your own or customize any provided.
The Preset is applied to only the file newly created by your "export" command. It is not applied to the Image in Aperture (unless you rename your Versions or your Masters). -
Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard
MDT 2012 U1
Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
But since we use the fields they must still be fuctional just not seen.
Thanks.....
If this post is helpful please click "Mark for answer", thanks! Kind regardsYou shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
Example:
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
SkipCapture=NO
SkipAdminPassword=YES
UserID=<MyUserID>
UserPassword=<MyPassword>
UserDomain=<MyDomain.com>
SkipProductKey=NO
SkipComputerBackup=YES
SkipBitLocker=NO
-Nick O.
Nick,
SkipAdminPassword=YES is for:
You can skip the Administrator Password wizard page by using this property in the
customsettings.ini.
I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
DomainAdminPassword=xxxxx
DomainAdminDomain=xxxxxx
JoinDomain=xxxxxx
If this post is helpful please click "Mark for answer", thanks! Kind regards -
How to hide the folder name in a KM Navigation Iview
Hi,
Scenario,
I am using a KM Navigation Iview with LinkListExplorer Layout set. The Folder Name appears at the top of the collection.
Please can someone tell me how I can hide the folder name for the iview. i.e I do not want the folder name to appear in the iview.
Appreciate your help.
Thanks,
VaishaliFolder name is located in the breadcrumb
remove your breadcrumb in your collectionrenderer of the layout set you are using.
Check the layout set you are using in your KM navigational iview.
Raghu -
How to put the file name in notepad file
dear frank,
how to put the file name in notepad file via power shell. I mean i want to put the file name in that notepad file
for example,
my file name is ABL and in this file data is
02/06/2015,180.00,182.00,176.01,180.50,1575500
02/06/2015,4.20,4.20,4.20,4.20,500
02/06/2015,113.50,113.70,112.91,113.09,157800
02/06/2015,682.01,695.90,682.00,683.19,4250
02/06/2015,213.98,215.00,213.00,214.87,326200
02/06/2015,21.52,21.65,21.52,21.60,4000
02/06/2015,111.00,111.25,108.25,108.91,17100
02/06/2015,52.00,52.00,52.00,52.00,500
and i want to data in this form
ABL,02/06/2015,180.00,182.00,176.01,180.50,1575500
ABL,02/06/2015,4.20,4.20,4.20,4.20,500
ABL,02/06/2015,113.50,113.70,112.91,113.09,157800
ABL,02/06/2015,682.01,695.90,682.00,683.19,4250
ABL,02/06/2015,213.98,215.00,213.00,214.87,326200
ABL,02/06/2015,21.52,21.65,21.52,21.60,4000
ABL,02/06/2015,111.00,111.25,108.25,108.91,17100
ABL,02/06/2015,52.00,52.00,52.00,52.00,500
There are many file like this that i want to be edit
plese tell me how can i do it, i think it is possible via windows power shell.
thanks in advance.Hi
Just for completeness, what version of VB.NET are you using?
Here is a complete project to copy all the files with the added "ABL," at the start of each line. You need to start a new Project with a BLANK default Form1, and replace all of Form1 code with the code below. When you run this project, you
need to use the 2 buttons to set up the ORIGINAL file folder and a folder to place the copies. You need to check if the file EXTENSION is correct (I assumed txt), and check the text to add to each line is correct. Once all is set up you should have a
big red button to start the operation.
NOTE: it is important that you try this out on a copy of some of the files to verify accuracy BEFORE trying on original files. Make sure you have a good back up of the original files before doing anything else.
' new project with default BLANK Form1
' replace all Form1 code with this code
' WARNING: make sure you have a backup of
' any files you use this application to
' operate on.
Option Strict On
Option Infer Off
Option Explicit On
Public Class Form1
Dim OrigFileFolderPath As String = Nothing
Dim CopyToFolderPath As String = Nothing
Dim lab1, lab2, lab3 As New Label
Dim tb1, tb2, tb3 As New TextBox
Dim b1, b2, b3, b4 As New Button
Dim fb As New FolderBrowserDialog
Dim bgw As New System.ComponentModel.BackgroundWorker
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles Me.Load
Me.Size = New Size(731, 300)
With lab1
.Text = "Original Files Folder Path"
.Location = New Point(15, 5)
End With
With tb1
.Width = 560
.Location = New Point(10, 30)
.BackColor = Color.Khaki
.ForeColor = Color.Maroon
.Font = New Font(Me.Font.FontFamily, 12)
.BorderStyle = BorderStyle.FixedSingle
.Anchor = AnchorStyles.Top Or AnchorStyles.Left Or AnchorStyles.Right
End With
With lab2
.Text = "Copy Files to Folder Path"
.Location = New Point(15, 125)
End With
With tb2
.Width = 665
.Location = New Point(10, 150)
.BackColor = Color.Khaki
.ForeColor = Color.Maroon
.Font = New Font(Me.Font.FontFamily, 12)
.BorderStyle = BorderStyle.FixedSingle
.Anchor = AnchorStyles.Top Or AnchorStyles.Left Or AnchorStyles.Right
End With
With lab3
.Text = "File Ext"
.Location = New Point(600, 5)
.Anchor = AnchorStyles.Top Or AnchorStyles.Right
End With
With tb3
.Text = ".txt"
.Width = 80
.Location = New Point(590, 30)
.BackColor = Color.Khaki
.ForeColor = Color.Maroon
.TextAlign = HorizontalAlignment.Center
.Font = New Font(Me.Font.FontFamily, 12)
.BorderStyle = BorderStyle.FixedSingle
.Anchor = AnchorStyles.Top Or AnchorStyles.Right
End With
With b1
.Text = "Choose Original Files Folder Path"
.AutoSize = True
.Location = New Point(10, 65)
End With
With b2
.Text = "Choose Copy Files to Folder Path"
.AutoSize = True
.Location = New Point(10, 185)
End With
With b3
.Text = "DO THE COPY"
.AutoSize = False
.Size = New Size(240, 50)
.BackColor = Color.Red
.ForeColor = Color.White
.Font = New Font(Me.Font.FontFamily, 20, FontStyle.Bold)
.Location = New Point(420, 80)
.Anchor = AnchorStyles.Top Or AnchorStyles.Right
.Visible = False
End With
With b4
.Text = "CANCEL JOB"
.AutoSize = False
.Size = New Size(240, 50)
.BackColor = Color.Red
.ForeColor = Color.White
.Font = New Font(Me.Font.FontFamily, 20, FontStyle.Bold)
.Location = New Point(420, 80)
.Anchor = AnchorStyles.Top Or AnchorStyles.Right
.Visible = False
End With
Me.Controls.AddRange({lab1, lab2, lab3, tb1, tb2, tb3, b1, b2, b3, b4})
With bgw
.WorkerReportsProgress = True
.WorkerSupportsCancellation = True
End With
AddHandler bgw.DoWork, AddressOf bgw_DoWork
AddHandler bgw.RunWorkerCompleted, AddressOf bgw_Completed
AddHandler b1.Click, AddressOf b1_Click
AddHandler b2.Click, AddressOf b2_Click
AddHandler b3.Click, AddressOf b3_Click
AddHandler b4.Click, AddressOf b4_Click
End Sub
Private Sub b1_Click(sender As Object, e As EventArgs)
fb.SelectedPath = My.Computer.FileSystem.SpecialDirectories.MyDocuments
fb.ShowNewFolderButton = False
Dim r As DialogResult = fb.ShowDialog
If r = Windows.Forms.DialogResult.OK Then
tb1.Text = fb.SelectedPath
If IO.Directory.Exists(tb1.Text) AndAlso IO.Directory.Exists(tb2.Text) AndAlso Not (tb1.Text = tb2.Text) Then
If tb3.Text = Nothing Then
redo: tb3.Text = InputBox("Enter the file extension that you want to copy/change", "FILE EXTENSION")
If tb3.Text = Nothing Then GoTo redo
End If
b3.Visible = True
Else
b3.Visible = False
End If
End If
End Sub
Private Sub b2_Click(sender As Object, e As EventArgs)
fb.SelectedPath = My.Computer.FileSystem.SpecialDirectories.MyDocuments
fb.ShowNewFolderButton = True
Dim r As DialogResult = fb.ShowDialog
If r = Windows.Forms.DialogResult.OK Then
tb2.Text = fb.SelectedPath
If IO.Directory.Exists(tb1.Text) AndAlso IO.Directory.Exists(tb2.Text) AndAlso Not (tb1.Text = tb2.Text) Then
If tb3.Text = Nothing Then
redo: tb3.Text = InputBox("Enter the file extension that you want to copy/change", "FILE EXTENSION")
If tb3.Text = Nothing Then GoTo redo
End If
b3.Visible = True
Else
b3.Visible = False
End If
End If
End Sub
Private Sub b3_Click(sender As Object, e As EventArgs)
b3.Visible = False
b4.Visible = True
If Not tb3.Text.StartsWith(".") Then tb3.Text = "." & tb3.Text
bgw.RunWorkerAsync()
End Sub
Private Sub b4_Click(sender As Object, e As EventArgs)
bgw.CancelAsync()
End Sub
Private Sub ReadPWFile(fn As String)
Dim filename As String = My.Computer.FileSystem.GetName(fn)
Dim barename As String = IO.Path.GetFileNameWithoutExtension(fn)
Dim copyto As String = tb2.Text & "\" & filename
Dim line As String = Nothing
Dim lines As New List(Of String)
Using sr As IO.StreamReader = New IO.StreamReader(fn)
Do
line = sr.ReadLine()
If Not line = Nothing Then
lines.Add(barename & "," & line)
End If
Loop Until line = Nothing
End Using
Using sw As IO.StreamWriter = New IO.StreamWriter(copyto)
For Each s As String In lines
sw.WriteLine(s)
Next
End Using
End Sub
Private Sub bgw_DoWork(sender As Object, e As System.ComponentModel.DoWorkEventArgs)
Dim ftc As Collections.ObjectModel.ReadOnlyCollection(Of String) = My.Computer.FileSystem.GetFiles(tb1.Text)
For Each f As String In ftc
If bgw.CancellationPending Then
e.Cancel = True
Exit For
End If
Dim ex As String = My.Computer.FileSystem.GetFileInfo(f).Extension.ToLower
If My.Computer.FileSystem.GetFileInfo(f).Extension.ToLower = tb3.Text.ToLower Then
ReadPWFile(f)
End If
Next
End Sub
Public Sub bgw_Completed(sender As Object, e As System.ComponentModel.RunWorkerCompletedEventArgs)
tb1.Text = Nothing
tb2.Text = Nothing
b3.Visible = False
b4.Visible = False
MessageBox.Show("Finished copying files", "Job Completed")
End Sub
End Class
Regards Les, Livingston, Scotland -
How can hide the command line of a t.code in the portal
Dear Experts.
I have the following doubt:
How can hide the Command Line of a Report that is called with a T.Code in the portal?
Attach Image:
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line using
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
In this moment I have used the two options:
1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
RESULT:
SAP Web Application Server
500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Sat Jun 12 20:26:39 2010
Module: icxxthr_mt.c
Line: 2698
Server: xyxab...
Error Tag: {-}
Detail: Connection to partner timed out after 60s
2) created an Iview Transaction in the portal and call my transaction.
RESULT.
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
But not can hide the field Command Line and other buttons.
I think that the command :
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
Only can be used if I create a service using the T.Code SICF .
Best Regards
Carmen.Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory -
How to include the file name as an XML field
Hi,
I'm using a file adapter for process a flat file and convert it into an XML. Does anybody knows how to include the file name into an XML field.
Ex.
I process the file named <b>XXIMN21022007.txt</b> and I need an XML like:
<MT_FILE>
<field1></field1>
<field2></field2>
<field3></field3>
<filename><b>XXIMN21022007.txt</b></filename>
</MT_FILE>
Regards
GonzaloJust go for dynamic configuration.
Check the sender file adapter to write the filename in the header (as explained in Michal's blog) and then read that header in some mapping.
U can use that even in simple message mappings.
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm
Your code for the filename tag would be something like:
<i>DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
http://sap.com/xi/XI/System/File,
FileName);
return conf.get(key);</i>
Regards,
Henrique. -
How to insert the file name to column
When user upload the file, in order to avoid the double file name conflict, so I need to change the file name to something else, but I still need save the former file name to some column to download the file with correct file name, I know how to rename and upload file, but I don't know how to catch the file name and save it to some column when using addt insert transaction?
Hi,
As I said earlier, you have to maintain the list of filename's "itemdescr" in different temp file and load it an and when required table instead of checking for round robin functionality. If you are looking forward that oracle sqlldr can able to access the filename as one of the parameter then - it might not possible AFAIK.
else perform the direct insert on the table from sqlclient.
- Pavan Kumar N -
How to Capture the File Names of any extension using ssis
Hello,
Can you please let me know on how to Capture the File Names of any extension(EG : xls,text,.csv etc) at a time and stores in excel file using SSIS?
Any help would be appreciated.
Thanks,
Vinay sIf you need to act differently on each file type separately or if not all types of files are wanted, i.e. the Filespecifier cannot be *.* in the Foreach loop:
In the ssis package
make 3 variables:
to store the file extension, e.g. User::CurrentExtension of type string
to store the filename found in the directory: @CurrentFilename
to store the name of the directory where the files reside e.g. User::CurrentDirectory
make a foreach loop of type Foreach Item enumerator:
in the items list you add each file extension that you need
txt
csv
xls
xlsx
As Variable mappings map the CurrentExtension to Index 0
Inside this foreach loop add another foreach loop of type Foreach File enumerator, in the collection Expressions
add Expression Directory , set to @[User::CurrentDirecotry]
add Expression FileSpec, set to "*." + @[User::CurrentFileExtension]
In the Variable mappings, map Variable user::CurrentFilename to Index 0
Inside this loop use Execute SQL Task to insert the filename in a Excel connection.
Jan D'Hondt - SQL server BI development -
How OSB archive the file name?
I have used JCA adapter to archive file while reading in OSB and OSB does archive the file with different name.
But OSB is creating the file with name as understandable form. Is it possible to give my own defined name while archiving the file(s).
Please help me !
-ThanksI dont think it is possible to change the names of the archive files once OSB processes the file. I haven't found any references of the same in the JCA adapter documentation as well.
You can check with Oracle support if this is feasible.
Thanks,
Patrick. -
How to print the file name in sap
Hi All,
I have requirment like,
there is a folder in my local system, inside that folder there are 10 Excel file like file1.xls,file2.xls..............file10.xls
how to print the file name of all these file in SAp like
file1.xls
file2.xls
file3.xls
file4.xls
file10.xls
Appropriate points will be rewarded.
Thanks in Advance
Arun kumarHi,
Still you are facing any problem with this code expalin the problem with details , otherwise close this thread.
Use Method <b>cl_gui_frontend_services=>directory_list_files</b> to read file names for a given directory
after reading the files then Use FM : <b>RSPO_SX_OUTPUT_TEXTDATA</b> to create spool from internal table data and print the data.
<b>sample code :</b>
data: desktop_dir type string.
data: ifiles type table of string.
data: xfiles type string.
data: count type i.
data: filepath type string.
call method cl_gui_frontend_services=>get_desktop_directory
changing
desktop_directory = desktop_dir .
call method cl_gui_cfw=>flush.
call method cl_gui_frontend_services=>directory_list_files
exporting
directory = desktop_dir
* filter = '*.xls'
files_only = 'X'
* DIRECTORIES_ONLY =
changing
file_table = ifiles
count = count.
DATA : x_name LIKE tsp03d-name,
x_dest LIKE tsp03d-padest VALUE 'LOCL',
x_rows LIKE sxpcklsti1-body_num VALUE 0,
x_startrow LIKE sxpcklsti1-body_start VALUE 1,
x_pages LIKE rspotype-pages VALUE 1,
x_pages_1 TYPE p DECIMALS 2,
x_rqtitle LIKE sxpcklsti1-obj_descr,
x_rqcopies TYPE i VALUE 1,
x_rqowner LIKE trdyse01cm-username,
x_immediate LIKE pri_params-primm VALUE ' ',
x_rqid LIKE tsp01-rqident,
i_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
x_pages = 1.
x_rqowner = sy-uname.
x_dest = 'LOCL'.
x_startrow = 1.
x_rqcopies = 1.
x_immediate = 'X' .
CALL FUNCTION 'RSPO_SX_OUTPUT_TEXTDATA'
EXPORTING
* name = x_name
dest = x_dest
rows = x_rows
startrow = x_startrow
pages = x_pages
rqtitle = x_rqtitle
rqcopies = x_rqcopies
rqowner = x_rqowner
immediately = x_immediate
IMPORTING
rqid = x_rqid
TABLES
text_data = i_contents
EXCEPTIONS
name_missing = 1
name_twice = 2
not_found = 3
illegal_layout = 4
internal_error = 5
size_mismatch = 6
OTHERS = 7.
IF sy-subrc <> 0.
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Appana
*Reward Points for helpful answers
Message was edited by: L Appana -
How to store the File Name from a Unix Directory into a ODI variable?
Hi,
I have built a ODI package with the following steps:
1. ODI is polling for a flat file in a Unix directory. I have used OdiFileWait tool for this purpose. Here the file name is not fixed, so I am using wild character (*) to poll for file. Example: DF*ABC1*.DAT where the first wild character denotes 1 letter and the second wild character denotes 2 digits.
2. In the second step, if the file is found, I am moving the file to ODI file server path (../oracledi/demo/file). Here I have used ODIFileMove tool.
3. Then I am using an ODI Interface to Load the file data into a Oracle database table.
4. I am using a Process log table to keep the log for each step I am executing in ODI that is ODIFileWait, ODIFileMove, Interface etc. for each file. In this table a row needs to be inserted after ODIFileWait tool gets the file, with the File Name and File Date. Later on this row will be updated as the consequent steps are executed.
Here is my concern, I need to get the exact File Name of the file after ODIFileWait gets the file and I need to insert that in the Process Log table after the ODIFileWait step gets a file. So if I can store the File Name in a ODI Variable, I can insert it into the Process log table at this point. This I am not able to do.
The files are coming in a different directory (not in ODI file server path), So after getting the file it is moved to ODI file server path (../oracledi/demo/file)
The Files which I am processing are fixed length format. Also, the File name and File Date is stored in the 1st Record(Header record) of the files.
Kindly provide me suggestions to implement this in my code.
Thanks and Regards,
Anik
Edited by: 809820 on Nov 10, 2010 11:36 PMLook at this link -http://odiexperts.com/getting-one-or-several-unknown-files-from-a-directory
change the command to fetch the ls command and write into File and then using either java or jython break the data and fetch the file name and date and insert into log table.
(or)
you can use the os.system command and get the complete ls command into string and then process and insert it.
Let us know if you need any other help. -
How to find the File name using the FTP Adapter
hi all,
how to find the File name using the FTP Adapter with BPEL.
RegardsFound the solution for this.
First In the mediator's routing rule use assign property $in.property.jca.file.FileName to $out.property.jca.file.FileName
In the BPEL's receive activity go to the properties tab and get the property to a BPEL variable. That should do it.
Thanks for the posts -
MessageFileUpload how to retrive the file name?
Hi there guys,
maybe it's a stupid question but i cannot find the answer :_( any of you knows how to retrive the file name i am going to upload from the messageFIleUpload item?
Thank You, Pier Paolo.
Edit: Found in another post!! eeheh LAZY ME!! :_)
Message was edited by:
PandreoLNice to know that you found the solution. You could have as well used the javadoc for the same.
--Shiv -
How to get the form name which is used in standard tcode like me23n in sap
how to get the form name which is used in standard tcode like me23n in sap
Moderator message: four out of four threads locked, please read and understand the following before posting further:
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
Edited by: Thomas Zloch on Nov 18, 2011 1:32 PMhow to get the form name which is used in standard tcode like me23n in sap
Moderator message: four out of four threads locked, please read and understand the following before posting further:
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
Edited by: Thomas Zloch on Nov 18, 2011 1:32 PM
Maybe you are looking for
-
New Development project in the middle of ECC EHP7 upgrade project
Hi All, We are performing ECC EHP7 upgrade project in our project system landscape and i have already started Dev system upgrade.Suddenly our development team wants to perform new project which required to install add-on product from third party app
-
How do I load music on my new ipod without using itunes?
I am having tons of problems with getting itunes to pull up on my computer. I believe that my computer has a pretty nasty virus in it and it is causing problems with many of my programs (internet explorer, norton, and other programs). I am having my
-
Display picture wont update or change Q5
I'm currently using bbm on my Q5 and for some reason my display picture won't change. And another thing I have bbm on my phone but when I go to app world and view the bbm app it says' this application isn't available for ur device" how is that possib
-
Error Code: 403 Forbidden
Hi, I'm new to microsoft products, so hopefully I can get my point across meaningfully. I'm trying to connect to a site internally through forefront/tmg and recieve this message: Error Code: 403 Forbidden. The server denied the specified Uniform Reso
-
Problem with bank statement processing
Hello, I have problem with BSP. When I try to add file formats to bank statement I have error - "You are not authorized to change the folder path [message 10003520-34]". I try to add file SAPBPESIB_CSB43.bfp from SAP portal. Path to file is C:\Progra