How can I access a web site that is blocked?

The website listed below is blocked. How can I access it?

https://webinar.cms.hhs.gov/e13581911/event/event_info.html 
Loads for me. What indication do you get that it is blocked?

Similar Messages

How can I refresh a web site that I use often but it also changes its content frequently. Where is the refresh icon?

I use to refresh my browser & web pages by clicking on the "refresh" button. This button is no longer on my browser. how can I refresh a web page or keep it up to date if there is no refresh icon to use.?

Firefox 4 and later use a combined Stop/Reload/Go button that is positioned at the right end of the location bar. 
During the page load process it shows as a Stop button and after the loading has finished the button is changed to a Reload button. 
If you type in the location bar then that button becomes a Go button. 
Middle-click the Reload button to duplicate the current tab to a new tab. 
*https://support.mozilla.com/kb/common-questions-after-updating-firefox

How can I obtain the web site template of the ''Imvelo Safari Lodges'' that appears on the Site of the day web page?

How can I obtain the web site template of the ''Imvelo Safari Lodges'' that appears on the Site of the day web page?

Hi Ginette,
The site that you are referring to does not appear to be a template that you can get your hands on, however, I will suggest that you contact the owner via their contact us page and see what can be done.
- Abhishek Maurya

CS5.5 refusing to open, launch so can't access urgent old site that requires work upon it

Dreamweaver CS5.5 refusing to open, launch so can't access urgent web site created within it a while back that requires work upon it. CS4 not open/launch itself either? Therefore can't even export a site file to open up in a newer version but that won't run, support vital menu editing within it.

Try clearing the program cache and/or restoring preferences...
Deleting a corrupted cache file
Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
If those don't work, you may need to reinstall using the Cleaner Tool. That won't affect your actual site files, but you would need to set-up the site definitions again within DW: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Can only access one web site

I can only access one web site . www.cisco.com. I am connected to the internet via a lynksys DSL Router, I am using dhcp and NAT from the Lynksys note:works fine for 3 other windows based pc's.
when I try to connect to any other site the page Hangs during load and neve displays.
I can ping all of the web sites that do not come up
I am using a SunBlade 100 and did a new install. I tried the install with webstart and had the same result during the install. again I can only open sucessfully www.cisco.com.

Hello!
I am getting this error, but the above fix does not solve the issue, however I do know what has caused it.
I have an edmx file in a WCF webservice which feeds a silverlight app. The edmx is quite complex and a bit fragile, but was working fine up until I introduced our Industry Codes view into the model. The view is basically { ID, ParentID, Name, ... }. In my model I have created an association to itself which describes Children(*)/Parent(0/1) so I have a nice and tidy hierarchical structure. The edmx and the service build without any errors - hurrah! However, when I update the service reference I then get the below error (and a whole load of others as none of the webservice objects exist anymore):
Error 21 Custom tool error: Failed to generate code for the service reference 'WCF_ContactAdmin'. Please check other error and warning messages for details. X:\2008-054 ContactAdmin_Silverlight\Contact2_Admin_Silverlight\Service References\WCF_ContactAdmin\Reference.svcmap 1 1 Contact2_Admin_Silverlight
When I try the fix mentioned in the link above this error disappears, but then so do all the objects in the datamodel, so I cannot continue from there.
Having the hierarchical data objects defined in the EDM will make like so much easier in future, any help will be greatly appreciated, thank you!!
Tim
Web Developer at Terrapinn

Can't access some web sites with safari

Can't access financial web site since time before last of safari update. Any help?

In my original post, not today's, I had said I was having the issues on the Mini, running OSX 10.6.8 and Safari v.5.1.5 for my bank's pill pay. I should have been more specific as to which machine and OSX Safari browser I'm having the T-Mobile problem with. My mistake.
It is on both the MacMini and now the Air too. A moment ago, I was able to log in to my.t-mobile.com on the Air, but after putting into my Bookmarks folder, I can't do it anymore. The Log in button comes up greyed out instead of green.
I'm also still having trouble with my bank's bill pay section on both computers too.
I wonder if it's related to the saving of the log in info or putting in the Bookmark Folder?

How can i upload my web site to adobe catalyst?

how can i upload my web site to adobe catalyst?

Need a lot more information Mary,
What are you building your site in? Have you read any of the documentation for BC? What software are you using? What are your skills and knowledge of BC , HTML, CSS, Javascript etc? Are you moving a site from something else to BC? What do you want to achieve from it....?
Your asking a very broad question there.

How can I specify UK web sites without having to reload firefox and typing in search criteria again. I can still do this on Internet Explorer

How can I specify UK web sites only when searching in Google. I can still do this using the sidebar on Internet Explorer but not on Firefox

This has been going on for months for me. Time to drop Firefox & go back to IE.

How to access old Web sites that exist in iDisk Sites folder

I have old personal Web sites that still appear to exist on my iDisk, under Home>Sites. But if I can't remember their URL, how do I access them? It seems that if I can see them on iDisk, there ought to be some sort of option to access them or to find the URL. No matter how much I poke around on iDisk, I can't find any way to access these old Web pages. Any idea?
I can download the parts of the site, and I guess I could re-assemble them, but why bother, if they are already set up and sitting on iDisk?

Terry Plowman wrote:
I have old personal Web sites that still appear to exist on my iDisk, under Home>Sites. But if I can't remember their URL, how do I access them? It seems that if I can see them on iDisk, there ought to be some sort of option to access them or to find the URL. No matter how much I poke around on iDisk, I can't find any way to access these old Web pages. Any idea?
I can download the parts of the site, and I guess I could re-assemble them, but why bother, if they are already set up and sitting on iDisk?
Try http//web.mac/com/<yourdot_mac_id>/<folder_insites>

How can I open a web page that is not compatible with safari?

Hi all
I get the following message when I try to go to a certain web site:
http://www.sia.homeoffice.gov.uk/Pages/licensing-rolh.aspx click on the "GO TO THE REGISTER" button
Please note: clicking the button above will transfer you to our secure server, which will open in a new window. You must be using Internet Explorer 6, 7 or 8, or Netscape 7.02 for the new site to display properly. You can return to this site by closing the new window.
I have looked at Internet Explorer and Netscape and both seem to be out of date with our IOS.
How can I access this page?

Try downloading another browser, Firefox for example. Open the link in Firefox and once the page opens copy the link and paste it in safari address bar. That works for me.
Still trying to find out why we have to do this though since it works just fine in Safari once you had it opened in another browser.
Hope that helps you!

How to enter a secure address in security so i can have access to web site

I used to be able to enter an address from a secure website and be able to access when I had internet explorer and with firefox I dont know where to enter address so I can access the secured we site.

Firefox doesn't have security zones like Internet Explorer. There's no Trusted Sites list to add sites to. Normally, web sites simply work, whether they're secure or not.
If secure websites don't load, see the following article.
* [[Websites don't load - troubleshoot and fix error messages]]
If the website does load but you're having some other problem with it, see the following article.
* [[Websites look wrong or appear differently than they should]]
If neither of those answer your question, please post a link to the site and or a description of what doesn't work, or whatever error message is displayed.

Can't access the web-site in my home folder from the internet. Need help.

I am trying to publish a website from the Sites folder in my home directory. The website is made and I can access it from from every computer within my ethernet. But despite a couple attempts I made I can not get the website published on the internet.
I have an Airport Express station. Two Macs and one PC are using the ethernet. As far as I can tell the Airport Express station is directly connected to the internet. I live in a brand new apartment which has Lan outlets in every room next to the electricity outlets. I have a single designated internet IP address.
To open my computer to the internet I set the "Default Host Option" in the Airport Administrator Utility and selected the default three digits for the "Default Host option" IP address. Then I updated the Airport Express station, manually set the IP address in the Network preferences on my Mac to the "Default Host option" IP address and activated Personal Web Sharing in the Sharing preferences. By doing so I lost my internet connection. It turned out I still had the same IP address that I had before I selected Default Host Option.
As I understand with the Default Host Option I designate one IP address within the ethernet to receive all traffic from outside. But how do you now tell the Airport Express station which computer on the ethernet will be the host for the incoming traffic carrying the Default Host Option IP address? Apparently just setting the IP address manually in the clients computer Network preferences to the "Default Host Option" IP address doesn't tell the Airport Express station to change the IP address it has assigned to this client to the Default Host Option IP address.
In another attempt to make my website accessible on the internet I removed the Default Host Option and instead opened Public Port 80 and Private Port 80 for the IP address of the client computer in the Port Mapping tap of the Airport Administrator Utility. But again, no access to my website from the internet.
To access the website from within the ethernet I use the following web-link, which works fine:
http://192.xxx.x.x/~user/index.html
The internet of course doesn't see the 193 IP address. It only sees the Public IP address. Therefore I used the Public address instead of the Private IP address to connect to my website from the internet:
http://222.xxx.xxx.xxx/~user/index.html
But as I said, I still can't access the website from the internet.
I have the feeling that I conceptually don't understand something correctly. I would appreciate if somebody could help me with this problem.

See this article:
http://support.apple.com/kb/HT1866
Sometimes My Music does not show up in special folders in TweakUI.
If so, see this post:
http://discussions.apple.com/thread.jspa?messageID=1731188&#1731188##
If you would rather not mess with the registry you can often work round with a shift key start.
Hold down the shift key and start iTunes, keep holding down the shift key until you are asked to choose or create a library. If you already have one, navigate to your iTunes folder and choose iTunes Library.itl. Otherwise create a new library in My music.

How can u open certain web sites w/out adobe flash? It won't let u download help

How do u open web sights w/Kurt Adobe flash?? It won't download it help

Flash itself is not supported on any iOS device (iPad, iPhone, iPod Touch) which is why you can't download it (http://www.apple.com/hotnews/thoughts-on-flash/)
Depending on what sites you are trying to access, you might find that some of them (probably more so if they are news sites) have their own apps in the App Store which might let you get some of the content that you want (and there is the built-in YouTube app). Also there are browsers such as Skyfire which 'work' on some sites - but judging by the reviews not all sites. If you want to play flash games then you are probably out of luck if you want to play on-line though the iSwifter app might work on some of them, but again some flash games have app versions in the store.

Can connect to WLAN, but can't access any web site...

I have a Nokia E61 that I have configured to access my wirless home network (Linksys). I use personal WPA security, and my SSID is hidden. I loaded the proper settings into an access point setting and when I go to Web, the phone shows that it connects to my Linksys router, but the web page never loads. I eventually get a time out error. If I connect to the same website using GPRS, it loads without any problem.
Any ideas?

Thanks for the reply!
I have looked at my RV082's firewall setup, but don't see anything out of the ordinary. I even disabled the firewall, but it didn't seem to make any difference. What did you have in mind that I should check?
I get the following error on the E61 when I try to access an Internet website: "Web: Connection Time Out". It takes about a minute or two for the E61 to generate that error.
Regarding the RV082's ability to assign devices to the right subnet, I have three other PCs on my network (2x Windows XP, 1x Windows 98SE), and they have always connected the first time and every time with no issue. How would I check which subnet the RV082 is assigning to the phone? On a PC, I usually do an "ipconfig /all" at the command line and see what's assigned. Is there an equivalent command for the E61 that I could enter while I'm connected?
If I remove the RV082 and plug my WAP54G directly into my cable modem, then my E61 can access the Internet. So it's definitely an incompatiblity with the settings in the RV082 and the E61. But before I/we blame the RV082, I have more or less the same problem at my employer's office: I can connect to the office network, but can't access any sites outside the company network. The only difference is the E61's error message: at work I get a "no gateway response" error within a few seconds. It's a company with around 200 employees at that site, and we're certainly not using an RV082 in the office. I have not tried to call Linksys support yet because in fairness to them, they won't know jack s*** about the E61 and how to configure/check the settings.
Is there something about the DNS settings in the E61 that I'm setting incorrectly? I have them set to Automatic in both IPv4 and IPv6 settings, which is how my PCs are setup at home and what my IT guy at work tells me should be OK.
Thanks in advance for any more advice!
BTW, I'm no big fan of Linkys either, but I've had zero problems with my Linksys products. Also, when I have had to contact Linksys for help with a setup, they have always eventually come through and solved the problem. I've tried contacting Nokia and can't even get a live person that can do anything (the E61 isn't supported by Nokia USA, and the UK phone number they gave me was just a recording). If anything, I'm ready to hurl my E61 through the window right now as I've spent way too many hours trying to get this thing to work.
hk

Can't access some web sites with version 4.0

I recently installed version 4.0 and am in test phase of the server.
With or without ACL's turned on, I can't access the following web site
https://www.sunnet.sunlife.com/member/signin/index.asp?
or
https://www.sunnet.sunlife.com/member/
In Internet Explorer, it sits on a blank page with the little world logo spinning around until it finally times out after a few minutes. I've tried accessing these sites with both IE6 and IE 5.5 and get the same problem.
As a footnote, the web access to these sites works fine with our current Web Proxy version 3.6.
Does anyone have any ideas why this isn't working through the new Proxy 4.0?
Thanks

I did some additional testing through Proxy 4. All web sites and web pages including secure sites that I tried accessing over the past couple of days all appear to work fine with the exception of the forementioned sites. Access to these specific web pages (which I cannot currently access) are part of our day-to-day business requirements, and therefore will prevent me from using Proxy version 4.0 as our production proxy unless I can figure out why these web pages won't load, and how to fix the problem.
As an experiment, I tried to access these web pages through Proxy 4 with Mozilla FireFox and Netscape 7. None of these web browsers (including Internet Explorer) will bring up these web pages when going through Proxy 4. But bypassing the proxy or going through our v3.6 proxy works fine for these web pages everytime, and with all browsers. This leads me to believe that this web page access problem is not a browser specific problem, but something in Proxy 4 isn't processing the request to display the page properly.
As a reference, the web site in question is http://www.sunlife.ca. On the left hand side of the page go to "Sign In" then "Plan Members". Thats where the request hangs through Proxy 4 no matter which browser I use, including Netscape... but works perfectly fine with Proxy v3.6.
Can someone who is running a version 4 Proxy also please try to access the SunLife Members login page and see if it works or fails for you?
Thanks

How can I access a web site that is blocked?

Similar Messages

Maybe you are looking for