How can i access my playlists on new harley from a file instead of using my actual ipod

trying to use a backup file to play music on new Harley boom box. will play songs from library but not playlists.

Hi, you have a lot of questions! Here are some articles that should help - [[Create bookmarks to save your favorite webpages]]. And - [[Profiles - Where Firefox stores your bookmarks, passwords and other user data]]. And - [[Learn more about the design of the new Firefox]].
To export/import bookmarks: Open bookmarks > Show All Bookmarks > Import and Backup.
You can bring up the Main menu bar temporarily by pressing Alt, or right click in the tab bar (but not on a tab) and tick/check Menu Bar if you want it to be there all the time.
The help button is at the bottom of the 3-bar menu (question mark).
Hope that helps!

Similar Messages

  • On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
    If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
    If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

  • How can I access my icloud iphone back up from my imac?

    how can I access my icloud iphone back up from my imac?

    I'm afraid you can't without using third-party software such as Wondershare Dr.Phone. 

  • How can I move CC to a new PC, from one I am returning to our asset team?

    I have CC installed on two PCs. So how can I move CC to a new PC, from one I am returning to our asset team?
    Howard

    You only need to sign out of it on the machine you wish to not use it on anymore.  After that, if you choose to you can uninstall it, but it is not necessary in terms of the software... maybe your asset team has issue with it remaining though.
    To get it on the new machine just install the same way you did for any others... install the Cloud manager, sign in, install the applications.

  • HT1386 I copied my my iTunes music from an old computer to a Macbook Pro, but it did not copy the playlists on my nano. How can I transfer the playlists and their content from the nano to the Macbook

    I copied my iTunes music from an old computer to a new Macbook pro but it did not copy the playlists that are on my Nano. How can I copy the playlists and their content on the nano to the Macbook? If I automatically sync the nano from the Macbook, will it scrub the content and existing playlists on the nano?

    You need a third-party program like one of those discussed here:
    https://discussions.apple.com/message/2901170#2901170

  • How can i access dmz server via public ip from inside?

    hi all !
    As shown in Figure，how can i access the server in dmz zone via public？
    i can access it via private ip 192.168.1.1 now,but i can't access it via 101.100.1.2.
    who can help me ?
    thank you !

    Hi,
    You would have to configure Static NAT from DMZ to INSIDE for the server in the same way you have done for DMZ to OUTSIDE.
    Basically in the following way for example
    object network DMZ-WEB
    host 192.168.1.1
    nat (dmz,inside) static 101.100.1.2
    This would enable your users on the "inside" to access the "dmz" server with the public IP address. And naturally only with the public IP address after this NAT.
    Hope this helps
    Please do remember to mark a reply as the correct answer if it answered your question.
    Feel free to ask more if needed
    - Jouni

  • HT201229 How can I access a list of incoming calls from a blocked number

    How can I access a call log of incoming calls from a blocked number on my iphone?

    Calls from blocked #'s won't go through, so they won't be listed on your device.

  • How can I access my home sharing when away from home?

    how can I access my home sharing music from my computer to my iphone
    when away from home?

    Welcome to the Apple Community.
    You can't. You can only homeshare over your home network.

  • How can I access and download earlier versions of Adobe Reader to put on my older model iPod Touch?

    We have model PC086LL iPod Touched from roughly 2008 for our school that are rarely used anymore because we've updated to iPads.  But, I want to be able to use some of the iPod Touches to store files to access remotely in emergencies.  Unfortunately I cannot access earlier versions of the Adobe Reader app that are compatible with this version iPod.  How do I get access to those earlier versions?

    SGMS Knight,
    Based on the model number that you provided, your device is an iPod Touch 2nd generation.
    According to the following Wikipedia page, the highest supported operating system for the iPod Touch 2nd generation is iOS 4.2.1.
    http://en.wikipedia.org/wiki/List_of_iOS_devices#iPod_Touch
    Adobe Reader for iOS version 11.0.1 is compatible with iOS 5.  However, the App Store does not have the earlier version of Adobe Reader that is compatible with iOS 4.
    As a user, you can download and install Adobe Reader for iOS only from the App Store.
    You may be able to find other free PDF viewers that are compatible with iOS 4 in the App Store.
    Good luck.

  • How can I access my iCloud/iTunes Match music from my Macbook Pro?

    I have iTunes match up and running and syncing to my home computer.  It works perfectly with my iOS devices.  I would also like to access my music from my portable laptop.  How can I do this?  There does not seem to be any obvious way to get to my music in the cloud from my laptop iTunes.

    I don't know how you managed to get Match working on your iOS devices without first enabling it on your computer, but that aside . . .
    Go to the "store" menu and select "enable iTunes Match"  from there you'll need to enter the same Apple ID You used to get it running.  Itunes Match will then scan the library and do its thing.  Generally you should leave it alone and not enable it on your iOS devices until it's all done uploading whatever songs it doesn't match.

  • How can I access iTunes library on my Mac from ipad?

    Lots of music on my G5 tower. How can I acces it on my iPad 1

    iTunes home sharing
    Home sharing support
    http://www.apple.com/support/homesharing/
    Understanding Home Sharing
    http://support.apple.com/kb/HT3819

  • How can I export songs with full info (INCLUDING LYRICS) to file for future use? [x]

    Hi everyone,
    I got my new iPod touch 4th gen, and I spend literally all day to edit songs' info like Artist, Lyrics, Album... with like thousand songs.. Then I've tried to export them fully for future use as back up, but I could not find any option to do so. Exporting library and playlist only saves info for basic tags but no lyrics in it. So what should I do? I've tried iTunes Export and mp3Tag but I still could not do it.
    I would appreciate much any help for me to back up full information of songs for future use.
    Regards,
    [x]

    Thanks for the responses.
    I forgot to mention the dimensions I need the file to be at, sorry. Overnight Prints requires that the uploaded file be at 2.13 inches wide by 6.13 inches high (or 638 by 1838 pixels) at 300 dpi. I think I understand what Scott Falkner means by pixels are not a unit of measure. However, I have been using inches in Illustrator, with the file being set to the height and width (in inches) required by Overnight Prints.
    Here is what I have uploaded to Overnight Prints so far:
    - Illustrator file set to 2.13 inches wide by 6.13 inches high – Upload preview on Overnight Prints is correct size, but shows the bookmark as pixelated/blurry.
    - Saved above Illustrator file as copy: “Press Quality Preset” PDF – Upload preview on Overnight Prints is correct size, but the bookmark is still pixelated/blurry.
    - Exported same Illustrator file as a PNG (638 pixels wide by 1838 pixels high - 300dpi) – Upload preview on Overnight Prints is correct size, but shows the bookmark as pixelated/blurry.
    - Creating an Illustrator file at 638 by 1838 pixels makes any file that is uploaded preview on Overnight Prints as too large, but not pixelated/blurry (I think I now understand why, just covering all my bases).
    So, I guess my more specific question would be:
    How can I create a file that I can upload to Overnight Prints (TIF, PDF, JPG, EPS, PNG, or AI) that ends up at the dimensions (in inches) required, while not appearing (at least in the upload preview) as low resolution (pixelated/blurry)?
    Thanks in advance for any responses (especially to such a novice question).

  • How can I read only a line of text from a file, line by line using Scanner?

    Here's the code I currently have for a program that finds a keyword from numerous files and prints every line in every file that has that keyword. The keyword is indicated by the first parameter in a command line and the files are every parameter after that. Right now, with the code I have, the program will not print multiple lines of each file if they contain the keyword. I am trying to solve this problem by figuring out a way to have a loop continue until an \n EOL character is found. I am not sure how to do this though. Here's the portion of code that I would like to change to do this. I need to add a condition somewhere after in.hasNext() I think to stop when it it hits a /n.:
    while (in.hasNext()) {
                        count++;
                        String nextWord = in.next();
                        lineOfText.add(nextWord);
                        if (nextWord.equals(keyword)) {
                            flag = true;
    import java.util.Scanner;
    import java.io.IOException;
    import java.io.FileNotFoundException;
    import java.io.FileInputStream;
    import java.io.PrintWriter;
    import java.util.ArrayList;
    public class Find {
        static ArrayList<String> lineOfText = new ArrayList<String>();
        static boolean flag = false;
        public static void main(String args[]) {
                   run(args);
        public static void run(String args[]) {
            try {
                PrintWriter out = new PrintWriter("output.txt");
                String keyword = args[0];
                for (int i = 1; i < args.length; i++) {
                    Scanner in = new Scanner(new FileInputStream(args));
    int count = 0;
    while (in.hasNext()) {
    count++;
    String nextWord = in.next();
    lineOfText.add(nextWord);
    if (nextWord.equals(keyword)) {
    flag = true;
    if (flag == true) {
    System.out.print(args[i] + ": " );
    out.print(args[i] + ": " );
    for (String s : lineOfText) {
    System.out.print(s + " ");
    out.print(s + " ");
    System.out.print("\n");
    out.println(" ");
    lineOfText.clear();
    out.close();
    catch (FileNotFoundException e) {
    System.out.println("file not found!");
    catch (IOException e) {
    System.out.println(e);
    Thanks

    Well, I thought I had this program finished, then I realized I need to match the keyword anywhere in the file(including within a word) and print out each line that "contains" the keyword in each file. So, I need some way of testing to see if the keyword is a part of each word and then flag the line that contains the keyword. Is there some method to do this? Thanks
    Here's the code I have now:
    import java.util.Scanner;
    import java.io.IOException;
    import java.io.FileNotFoundException;
    import java.io.FileInputStream;
    import java.io.PrintWriter;
    public class Find {
        static String line = "";
        static boolean flag = false;
        static boolean flag2 = false;
        public static void main(String args[]) {
                    run(args);
        public static void run(String args[]) {
            try {
                PrintWriter out = new PrintWriter("output.txt");
                String keyword = args[0];
                System.out.print("Searching for the keyword: " + keyword);
                out.print("Searching for the keyword: " + keyword);
                System.out.print("  in files: ");
                out.print("  in files: ");
                for (int k = 1; k < args.length; k++)
                     System.out.print(args[k] + " ");
                     out.print(args[k] + " ");
                     System.out.println("\n");
                     out.println("");
                     out.println("");
                for (int i = 1; i < args.length; i++) {
                    Scanner in = new Scanner(new FileInputStream(args));
    while (in.hasNextLine()) {
    line = in.nextLine();
    String[] splitLine = line.split(" ");
    for (int j=0; j < splitLine.length; j++) {
    if (splitLine[j].equals(keyword) && flag2 == false) {
    flag = true;
    flag2 = true;
    System.out.print(args[i] + ": " + line + "\n");
    out.println(args[i] + ": " + line);
    flag2 = false;
    System.out.print("\n");
    out.println(" ");
    out.close();
    catch (FileNotFoundException e) {
    System.out.println("file not found!");
    catch (IOException e) {
    System.out.println(e);

  • How can i remove a key and its value from properties file

    hi all,
    i want remove a particular key and associated value from the
    properties file. is their any standard way of doing?
    thanks inadvance
    daya

    hi,
    thanks
    i am able to remove the key,
    one more question how can avoid storing date and time
    in properties file.
    thanks
    daya

  • How can I get firefox to execute perl scripts from local files

    I have created perl scripts on my local host (file type ".pl").
    In MS Windows I have associated that type to a perl interpreter installed on my local host.
    IE allows me to create links to them and to execute them (after asking for permission).
    How can I get firefox to do the same? It doesn't seem to allow me to add application types, only to change those that are already defined. As a result, in firefox, they just show up as text, instead of being executed.

    First guess is that you did not use an .html extension on the file. The file may well be ''name.html.txt''
    * see http://www.bbc.co.uk/webwise/guides/file-extensions
    *http://windows.microsoft.com/en-gb/windows/show-hide-file-name-extensions#show-hide-file-name-extensions=windows-vista
    Forum Note
    This is normally offtopic for this forum. I say normally because now we cover webmaker questions. I wonder if this is therefore on topic as a webmaker question?
    I have tagged with webmaker-contribution

Maybe you are looking for