How can I Access TC outside of my home network?

Hi everyone:
I am new to the MAC World. We just bought my daughter a Mac Book Pro to use in University then added the time capsule at home so she would be able to back up her work over the internet and we would be able to use the WIFI and TC here at home. We get to the University, set everythin up and Airport goes into a loop searching for the TC; it appears it cant see the TC. We are using the wired internet through the school then go to a wireless router in my daughters dorm to allow her to access the internet both with her phone and computer.
Is there a simple fix for this? I also have three other PC's other laptops and several cell phones accessing the home network at any given time but only need access outside my home to the TC for the MAC Book Pro. The sales rep at Future Shop said it would be easy to hook up and access.
Any help would be appreciated.
Thanks,
Martin

Ok.. you have to work out the way you are going to access the TC..
There are basically three methods..
1. Direct access using AFP.. you need a static public IP and the TC as the main internet router.. then you need to turn on internet access and password the hard disk. The college has to have port 548 open.
If you do not have a static public IP then you can use ddns service but there is no client in the TC.. so you will have to figure out a way to update the service.
2. Use BTMM with icloud. This is the Apple method. It actually uses vpn..(the vpn is locked to apple use only but it is not available to end user).. The requirements are 7.6.1 firmware and lion or ML on a Mac computer. I am not sure of the ports because the link to the Apple cloud is separate from the vpn to your home system.
3. VPN.. that means you need to bridge the TC and use a decent quality vpn modem / router or combo thereof.
VPN are not for the faint of heart.. it can take a lot of work to get running but offers the best security.. you will need to change the network equipment in your house more than likely.. using a pc / mac as a vpn server is possible.. but messy.
There are also easy ways to at least access the home computer.. teamviewer for example. This is likely blocked by the college though.
Double NAT is where you put a router on a private IP behind another router on a private IP.. that makes port forwarding close to impossible.

Similar Messages

Thinking of purchasing Time Capsule.... Can I access my documents saved on (Home Network) Time Capsule from another Network??? For instance, I can access my documents saved on MyBookLive (which is connected to my wifi) from ANY wifi connection...

Thinking of purchasing Time Capsule.... Can I access my documents saved on (Home Network) Time Capsule from another Network??? For instance, I can access my documents saved on MyBookLive (which is connected to my wifi) from ANY wifi connection... Like when I'm at school I can download documents stored on my MyBookLive at home.... I love this feature... But I would prefer to keep my products apple... So my question is can I access my documents from ANYWHERE with Time Capsule???
Other products I have: MacBook (2009 limited edition it's aluminum) two iPad2 (2012) iPhone 5 (2012) two iphone4 iPod touch (2010) iPod Nano (2011)

Remote access to TC is allowed by BTMM and iCloud service.
Not for ipad or iphone.. only the Macbook although I think people have some work arounds..
NOTE. Your school firewall should block it. If I was still working in network admin I would. ie you are risking the whole network to get access to files unchecked for viruses.. and please don't just say Macs don't get viruses, you can still be the source of the infection even if you don't suffer the disease. Just a carrier.
http://support.apple.com/kb/HT3486

TS1398 How can my iPad be added to my home network?

I have tried every set of numbers on my 2Wire home network portal. But after locating the WI-FI when entering the password that is written on the portal, I get an error message saying that the password is incorrect. I have other computers in this network which had no problem joining. I am quite frustrated now. By the way, my other computers are PCs. What am I missing here?

You can transfer them from your iPad to your computer when you get home : http://support.apple.com/kb/HT4083
Personally I wouldn't delete them from the cards, I tend to take enough cards with me so that I don't have to re-use any whilst I'm away (cards are relatively cheap these days). I've never had any real problems with storage failing, but I fell happier knowing that I've got the photos on my iPad or laptop and still on the memory card until I get home and can copy to external drives. I'd personally not tempt fate

How can i access the app store outside the us?

How can I access the app store outside the US?

Technically, that would be a violation of T&C.

How can i access dmz server via public ip from inside?

hi all !
As shown in Figure，how can i access the server in dmz zone via public？
i can access it via private ip 192.168.1.1 now,but i can't access it via 101.100.1.2.
who can help me ?
thank you !

Hi,
You would have to configure Static NAT from DMZ to INSIDE for the server in the same way you have done for DMZ to OUTSIDE.
Basically in the following way for example
object network DMZ-WEB
host 192.168.1.1
nat (dmz,inside) static 101.100.1.2
This would enable your users on the "inside" to access the "dmz" server with the public IP address. And naturally only with the public IP address after this NAT.
Hope this helps
Please do remember to mark a reply as the correct answer if it answered your question.
Feel free to ask more if needed
- Jouni

How can I access global variables in a loaded Applescript?

How can I access global variables in a loaded script, in Xcode, ApplescriptObjC? Basically, I have a global variable defined in my parent script using "property", and I need to modify objects connected to those variables inside of a loaded script.
Example:
Parent script:
script AppDelegate
property myTextField : missing value
//linked to a text field object
tell myScript to myAwesomeHandler_()
end script
Loaded script:
on myAwesomeHandler_()
myTextField's setStringValue_("The new Xcode is so glitchy ugh")
//changes value of linked text field of parent script
end myAwesomeHandler_
The problem is, the variable is undefined in the Loaded script, and I need it to have the same value as the parent script, and I don't want to pass the variable through the Handler. Any ideas?

I think want you are looking to do will need to be done in two steps. Because myTextField needs to be a property for the ObjectiveC part of the code you cannot turn it into a global.
However if you make a temporary variable global assign the string to it in the handler then set myTextField off of it.
global myTextFieldGlobal
script AppDelegate
property myTextField : missing value
//linked to a text field object
tell myScript to myAwesomeHandler_()
myTextField's setStringValue_(myTextFieldGlobal)
end script
on myAwesomeHandler_()
set myTextFieldGlobal to "The new Xcode is so glitchy ugh"
//changes value of linked text field of parent script
end myAwesomeHandler_
I know you stated you did not want the handler to return a value but I have to ask why? Global's, imo, are not a good idea and really should be used as a last resort.
One other possibility is to pass a reference to the property to the handler. Not sure if that works in AS of if that would satisfy our requirement of not passing the variable through the handler
<edit>
Another though have you tried to define the property outside the script? That is
property myTextField : missing value
script AppDelegate
Not sure if that will work.
You might also want to have a look at Scope of Properties and Variables Declared in a Script Object

Does my macbook air have a built in virus scan? how can I access and use it? also any recommendations of what software if this is not avail ?

does my macbook air have a built in virus scan? how can I access and use it? also any recommendations of what software if this is not avail ?

Contrary to what Geeks on Hugs is telling you, Mac OS X does indeed have a basic malware scanner. It is not a feature that is directly accessible to the user, and works a bit differently than every other malware scanner out there. Gatekeeper, which has been mentioned here, is entirely separate, and provides a different method for helping to protect you against malware.
The anti-malware scanner in Mac OS X is called XProtect. When you download an application (or any other kind of executable code), it is automatically "quarantined," so that when you open it you're asked if you really want to do that. I'm sure you're very familiar with this aspect of Mac OS X if you have ever downloaded any apps from outside the App Store. What you don't know, though, is that each time you try to open a new app, that app is checked by XProtect. If it is identified as malware, you will not be allowed to open it, and will be warned that it's malware.
At this time, there is no known malware that can infect a properly up-to-date Mac. All current malware will be blocked by one or more methods.
For more information, see my Mac Malware Guide.
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com.)

How can I access my iCloud account on the web from my phone

how can I access my iCloud account on the web from my phone
iPhone 5 iOS 8.3
I have iCloud turned on, location services on, find my phone works but when I try to access iCloud via Safari on the phone it takes me to a page Apple.com,
iCloud then three options
set up iCloud on my phone (i have)
Install Find my phone, it is installed and it works from my MBP
or install find my friends, I don't need that I have no friends.
my calendars and contacts and bookmarks and all are all sync'd and working on the phone, but i thought if I typed in iCloud.com on the phone in Safari I would go to my iCloud web page that looks like this on my Mac.
Is that NOT how iCloud should/would look on my phone via Safari?
This is maybe a dumb question after 3+ year of iPhone'ing
thank you for clarifying or helping me to understand
jojoguitar_mmn_usa

I've been playing with a Galaxy here at work and here's what I've found so far - please feel free to jump in and suggest alternative methods to configure or access the various icloud components.
So the original Q: Can you access your icloud account on Android?
Not entirely: the website can't be used from an android browser (not properly - even with Dolphin HD and posing as different browsers it won't load correctly. So Find my iphone is out, so is the address book or looking at your e-mail or calendar just in a browser window
I was able to setup my e-mail using the IMAP settings published here:
http://support.apple.com/kb/HT4864
Be sure to setup the account manually - and note if you have trouble using SSL try TLS (that worked for me)
Address book is a no go so you'll have to use iTunes to sync all your contacts over to Gmail - if you still have an iPad it means managing contacts in two places though . Same goes for your calendar - transfer it to Gmail and forget about iCloud's calendar. Nice instructions here: http://howto.cnet.com/8301-11310_39-20064060-285/how-to-switch-from-iphone-to-an droid/
iWork is an Apple proprietary bit so don't expect much there.
So in my case, if I'm really going to make the switch to a Galaxy from my iPhone it really means I'm going to have to switch to using google as the backend. The timing to swap over to a galaxy/android phone is not the greatest - given that I'd have to give up my Apple addiction (syncing photos and itunes and losing access to my device tracking). Plus I still have an iPad and a mac and like living in the Apple ecosystem. I think I'll wait and see what the new iPhone looks like before I commit

I sent my iphone for repair. before I sent it I did a backup (on the 7th of august). no i got my phone back but in iTunes I only see a backup from 21st of july. How can I access my latest back up?

I sent my iPhone to Apple for repair. Before I sent it I did a backup (on the 7th of August). Today I got it back, but my iTunes only shows me a backup from 21st july and from today. How can I access my backup from 7th of august?

You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer.

How can I access the Attribute Values from the Search Region

Hi all,
I have a table which contains Company id, department id, and PositonId. For a particular Company and Department there may be multiple records.
I have to pupulate a table which contains the position and other details that comes under a particular Department and Position based on the selection in the Three comboBoxes.
Also I have to populate a select many Shuttle to add new postions and records under a particular Department.
I created a query panel *(Search Region)* for the serch and a table to display the data. That is working fine.
Now the issue is I am using a view criteria to populate the shuttle with two bind variables ie, DepartmentId and CompanyId.
If the serach will return a resuktant set in the table it will also pupulate the correct records, otherwise ie, if the if the serch result is empty the corresponding iterator and the attribute is setting as null.
SO I want to access the attribute values from the Search Region itsef to populate the shuttle.
I don't know how can I access the data from the Search Region.
Please Help.
Regards,
Ranjith

you could access the parameters entered in search region by the user as follows:
You can get handle to the value entered by the user using queryListener method in af:query.
You can intercept the values entered as described
public void onQueryList(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
List<Criterion> searchList = qdes.getConjunctionCriterion().getCriterionList();
for ( Criterion c : searchList) {
if (c instanceof AttributeCriterion ) {
AttributeCriterion a = (AttributeCriterion) c;
a.getValues();
for ( Object o : a.getValues()){
System.out.println(o.toString());
//call default Query Event
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
public void onQueryTable(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
private void invokeQueryEventMethodExpression(String expression, QueryEvent queryEvent){
FacesContext fctx = FacesContext.getCurrentInstance();
ELContext elctx = fctx.getELContext();
ExpressionFactory efactory = fctx.getApplication().getExpressionFactory();
MethodExpression me = efactory.createMethodExpression(elctx,expression, Object.class, new Class[]{QueryEvent.class});
me.invoke(elctx, new Object[]{queryEvent});
Thanks,
Navaneeth

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; I also have Microsoft Word installed on the Mac as well.

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; none of the options I choose work. I also have Microsoft Office (with Word) installed on the Mac as well.

Format the external drive as FAT32 or ExFAT. Both computers will then be able to read and write to it.

How can I opearate indicator outside while loop?

I do small program, I have many while loops and I want to connect wire (in my application) from each loop to AND gate then to another while loop, but how can I operate these wires to agree with the change of my application inside while loops.
If not clear :
In another words, suppose I want to operate indicator ouside the while loop. How can I operate indicator outside while loop, so when my application become TRUE (inside while loop) the indicator will be ON (outside while loop) and when my application become FALSE(inside while loop) the indicator will be OFF (outside while loop).
Help me if you have any idea please..........................

Hi Rammo,
For the wire to carry the boolean condition from the while loop to an 'and' gate outside, the while loop must stop running
If you want the while loop to keep on running and still pass a boolean value to a destination outside the while loop, use any one of these: property nodes, global or local variables.
i am still not clear as to what you intend to say by this sentence
" I want the wire that comes out from the while loop will become TRUE if it in my application is TRUE inside while loop and the opposite is true. Because I want to connect the wire that comes out from while loop to AND gate than to another application"
plz tell me if the first part of this mail of mine answers your doubt or do you need more information?
regards
Dev

Hi there I lost my password for my original iTunes account I can't recover it because the email address it is registered under is not longer valid How can I access my old account?

Hi there.
I did a factory restore and then restored it with iCloud back-up. I have been using lots of Apple products and i have used three different email adresses. Almost all apps restored perfectly but everytime i try to play a song in the Music app, i asks me for a Apple-ID i had no idea i have used.
Hence:
I lost my password for my original iTunes account
I can't recover it because the email address it is registered under is not longer valid
How can I access my old account?
Can't find a place to change the email address to my new one without the password which I no longer remember.
There is no way to just erase Apple-ID's on my device either.
What to do? Should i ju give up and start from scratch and delete 2 years of stuf?
Cheers!

If you can remember the answers to the security questions when you set up that account - I think that you can reset the password without needing email authentication. You can try it here. Read it and see if it's possible. But if you can't remember the answers to the questions it will not work.
http://support.apple.com/kb/ht1911

How can I access Address Book data from an older version of the application to transfer it to a newer version of Mac OS running on a second hard drive on the same MDD G4?

I installed a hard drive from one PowerPC Dual 1.25 GHz MDD into another one with an older version of the OS X. all my Address Book data are on the older hard drive, from which I now boot the computer. When I launch Address Book as an app on the hard drive with the newer version of the OS, I get an error message that says I cannot run the version of Address Book from the older hard drive on the newer OS. How can I access the data on the older hard drive version of the Address Book app so that I can transfer it to the newer version of the app on the boot drive? The "Import" functionality will not work. I will be grateful for any help I can get. I would also like to uninstall the older version of OS X from the older hard drive.

Boot from the older version of OSX, then in AB use the File>Export>Export vCard after selecting all in AB.
Then boot from the new OSx & use the new AB to import that VCF file.

(261936172) Q general How can I access an EJB hosted on a remote server?

Q<general> How can I access an EJB hosted on a remote server?
A<general> The ability to add EJB control files enables you to access an EJB that
is deployed to the server on which your web service is running. When you select
"add EJB control" you need to supply the home and remote interfaces for the EJB
as well as the JNDI name. This does not provide you with the capability for creating
a control for a remotely hosted EJB. To use a EJB hosted on another server you
will have to provide the appropriate code within your web service itself. You
will have to programmatically gain to access the JNDI for the remote server, lookup
up the home stub and use it to create the remote stub for the EJB. Of course,
to make this work you must have the necessary client interfaces in you classpath
(home and remote interfaces) which can easliy be achieved by adding the EJB client.jar
file to the lib directory in the webservice WEB-INF folder.

just define the different server path in the description xml file
<jndi-name>jnp://serverA(B)/....</jndi-name>

How can I Access TC outside of my home network?

Similar Messages

Maybe you are looking for