How can i access the hard drive in a satellite A30?

I have just bought a new hard drive and have been startled by the lack of information on the internet with help to access the hard drive. Please help. I have the satellite a30-203. Thanks, Daniel Short

Hi daniel,
turn your A30 upside down. Then you need to remove one screw in order to remove your optical drive. After this you will see the HDD. Remove 4 screws that secure your HDD from the computer. Then pull back the hdd using the back brackets in the same way like you pull out your optical device.
Hope this will help.

Similar Messages

  • Help! When i connect my "iomega" External hard drive to my mac it does not show in devices or on the desktop, how can i access my hard drive?

    Help! When i connect my "iomega" External hard drive to my mac it does not show in devices or on the desktop, how can i access my hard drive?

    what format your iomega HD is it NTFS , if NTFS try download   http://www.apple.com/downloads/macosx/system_disk_utilities/ntfs3g.html

  • How can I remove the hard drive from an iMac g4 before recycling it?

    How can I remove the hard drive from an iMac g4 before recycling it?

    There are take-apart guides online.  For example
    http://www.xlr8yourmac.com/systems/imac_g4/imacg4_takeapart.html
    However, you can also consider securely erasing the hard drive instead.  You can do this using a Mac OS X installation disc with a version that your iMac G4 can boot from the optical drive.  If this is a viable option, please post back (include Mac OS X version on installation disc).

  • I have a MacPro with two 1T hard drives. How do I access the hard drive that is not the start-up drive?

    I purchased a MacPro and upgraded to 2 1T hard drives.  How do I access the hard drive that is not the start-up drive?

    Have you formatted these new drives yet with Disk Utility?  That is the first step.
    Once they are formatted, if you want to see them on your desktop open the Finder preferences, General, and clock the checkbox that says "Show these items on the desktop" for the hard disks.  If that preference was already set you should see the drives appear after they are formatted.  Then they are there for you to use as you wish.

  • How can I add the hard drive icon to the menu bar on a MBPr

    How can I add the hard drive icon to the menu bar on a MBPr?  I have downloaded Google Earth and it wants me to drag it to the hard drive for install. I was able to display the icon but now I would like to put it on the menu bar. Is this possible? Or can I add it to the hardware section under system preferences?
    I'm a new Apple user, coming out of the dark ages of a lifetime in the PC Windows world.
    Thanks

    It's on your Desktop, is it not? You cannot put it on the menubar through OS X although you may find third-party utilities that will. If you want it on the Desktop:
    Select Preferences from the Finder's Finder menu and check the desired boxes:
    Click on the Sidebar icon in the toolbar to set what you want displayed in the Sidebar.

  • How can i add the hard drive to my desktop

    how can i add the hard drive to my desktop

    bobbyruff,
    open the Preferences in Finder and click on the General tab. Look for a checkbox entitled “Show these items on the desktop: Hard disks”. Check it and close Preferences.

  • I can not access the hard drive connected to my airport extreme!  Any thoughts?

    I can not access the hard drive connected to my ariport extreme.  When I use the finder to connect a server and type in the IP of the a. extreme, 10.0.1.1 it does not work and I get an error message.
    Any thoughts.
    A

    Is the hard drive formatted for Mac in Mac OS Extended (Journaled)?
    If yes, you may need to use a powered USB hub since the USB port on the AirPort Extreme is under powered and it is often necessary to use a powered hub....even if the hard drive has its own power supply
    If both items check out above.....have you checked Finder Preferences to make sure that "Connected Servers" will be displayed?
    Finder Preferences > General > Show These Items on the Desktop > Connected Servers
    Then with the Finder menus displayed at the top of the screen click the Go menu
    Click Network and the AirPort Extreme icon should be displayed
    Double click the icon to mount the drive on the desktop

  • How can I erase the hard drive securely?

    I want to sell my old iMac G3 with OS 9.2. First I'd like to erase the hard drive securely, so that no information can be recovered later. OS X allows you to do this easily with the Erase tab in Disk Utility. Can anyone advise how this can be done in OS 9.2?

    Hi, iHope -
    To do a reasonably secure wipe of the hard drive, use OS 9's Drive Setup utility while booted to an OS 9 Install CD - it's in the Utilities folder on such a disk. Select the Zero all Data item in the Initialization Options item in the Functions menu of Drive Setup.
    This article provides excellent step-by-step instructions - Using Drive Setup

  • With Lion, How Can I Erase the Hard Drive and Reinstall The System Software?

    I plan on buying a used iMac with a Core 2 Duo so that I can run Lion.  Since Lion can only be purchased at the Mac App store what if I needed to erase my hard drive and re-install the system software.  How can I do this without a DVD with the OS on it like I have for Snow Leapard.  I suppose that I could boot from my Snow Leapard DVD and do the erase.  Then, I supposed I would be able to download Lion again from the Mac App Store without paying for it again.  But, how would you erase a hard drive and reinstall the system software when purchasing a new Mac with Lion already installed and no DVD at all with the OS on it?
    -- Kaydell

    When someone purchases any Apple computer with a DVD Drive, they should have recieved two DVDs... One contains the Operating System (up to Snow Leopard, Lion no longer ships on DVD) and the other contains the SYSTEM SOFTWARE (i.e. iLife and iWork). To install the software, they just insert the DVD with the SYSTEM SOFTWARE into any compatible Mac and run the installer. There is no need to erase the hard drive to install SYSTEM SOFTWARE. Maybe a friend can let you borrow the SYSTEM SOFTWARE DVD. The other option is to purchase the software via the App Store.
    FYI... App Store purchases are linked to the PURCHASER'S APPLE ID. So if you buy a used Mac from a friend and that Mac already has Lion installed on it,that Lion purchase is linked to YOUR FRIEND'S APPLE ID, not yours. So if you want to download Lion again, you will have to enter your FRIEND'S APPLE ID AND PASSWORD. You can always have your friend re-download Lion and make you a DVD copy.

  • How Can I clear the hard drive and install Tiger?

    I bought a used iBook. I do not have the original discs, but I do have Tiger on DVD. Is it possible to clear the hard drive completley and put on a fresh copy of Tiger? How can I do this?

    Rolesh:
    Formatting, Partitioning Erasing a Hard Disk Drive
    • With computer shut down insert install disk in optical drive.
    • Hit Power button and immediately after chime hold down the "C" key.
    • Select language
    • Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
    • Select your HDD (manufacturer ID) in left side bar.
    • Select Partition tab in main panel. (You are about to create a single partition volume.)
    • Click on Options button
    • Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)
    • Click OK
    • Select number of partitions in pull-down menu above Volume diagram.
    (Note 1: One partition is normally preferable for an internal HDD.)
    • Type in name in Name field (usually Macintosh HD)
    • Select Volume Format as Mac OS Extended (Journaled)
    • Click Partition button at bottom of panel.
    • Select Erase tab
    • Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
    • Check to be sure your Volume Name and Volume Format are correct.
    • Click Erase button
    • Quit Disk Utility.
    Open installer and begin installation process.
    Installation Process
    (If you are still booted from the install disk skip first three steps)
    • With computer shut down insert install disk in optical drive.
    • Hit Power button and immediately after chime hold down the "C" key.
    • Select language
    • Open Installer and begin installation.
    • Select installation option
    • Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
    Optional: Check box to install X11 (Tiger and later) BSD Subsystems (Panther & earlier).
    • Proceed with installation.
    • After installation computer will restart for setup.
    • After setup, reboot computer.
    • Go to Applications > Utilities > Disk Utility.
    • Select your HDD (manufacturer ID) in left side bar.
    • Select First Aid in main panel.
    • Click Repair Disk Permissions.
    • Connect to Internet.
    • Download and install Mac OS X 10.4.11 Combo update (PPC) (Tiger)
    Computer will restart.
    • Repair Disk Permissions as previously.
    • Go to Apple Menu > Software Update.
    • Install all updates.
    Computer may restart after updates.
    • Go to Applications > Utilities > Disk Utility.
    • Select your HDD (manufacturer ID) in left side bar.
    • Select First Aid in main panel.
    • Click Repair Disk Permissions.
    Please post back with questions, comments or update.
    Good luck.
    cornelius

  • How can i access the hard disk and know the no of partitions

    sir
    i want to access the hard disk and know how many parttions the hard disk have means c,d,e,f,g or may be c,d,e? also volum no or serial no.
    but i do not know how?
    plz help me and send me a code
    thanks in advance
    if this quesstion is not related to this forum plz guide me that where i put this quesstion?

    You figure out how to do it on your OS using C/C++ code.
    Then you write a wrapper in JNI to call your C/C++ code.

  • Can I replace the hard drive in my Satellite A100?

    I have a Satellite A100-033 PSAANE, running Windows Vista Home Basic. The hard drive is 60G. I save virtually all my data onto an external hard drive, but even so the hard drive will eventually not have enough space for the growing number of programs which I have installed, the various temporary files, etc. For example, I would like to install VirtualBox and run XP ( Ido have a copy), plus Linux, and maybe some other operating systems, within it, but that is likely to eat up more hard disc space than I have available.
    Does anyone know if it is possible to take out my existing hard drive and replace it with another one of a higher capacity? Is this possible?
    I would have to reinstall Vista on the new drive, from the rescue disc which came with the PC. I don't mind doing this, but will Windows Vista be "recognised" when I try to install it on the new hard drive?
    Sorry if these questions sound naive, but I don't know how to put a new hard drive into a laptop, or even if this is possible. I bought the Toshiba in February 2007, which was just after Vista had been released. I wasn't given the option of XP: Vista was the only operating system Toshiba provided at that point. I was assured that a 60G hard drive would be fine for Vista, but I do have to say that I feel I was wrongly advised, and that Toshiba should never have released a 60G machine for use with Vista. Hence my wish to have a hard drive with a bigger capacity.

    Yes you can install a higher capacity HDD. I believe the A100 can take any size of SATA 2.5" HDD, so you should be able to install a 250GB or 320GB successfully.
    As for Windows, you can reinstall it using the Toshiba Recovery Disc that came with the laptop.
    Instructions:
    Remove the screw(s) from the HDD cover on the base of the laptop to access the HDD.
    Slide out the HDD
    Transfer the HDD cradle/mounts to the new HDD
    Slide in the new HDD and screw on the HDD cover.
    Turn on the laptop and press F12 to access the boot menu.
    Insert your Recovery Disc and choose the CD icon to boot from it.
    Follow the prompts to install Windows.
    Connect your original HDD to the A100 using a USB adapter to restore your files/documents.
    ps. Remember to backup your important files regularly. HDD's can fail at any time since they have delicate moving parts, even when new.

  • How do I access the hard drive that is plugged into my Wireless router?

    I've got a HD plugged into my Linksys 3200 and do not know how to access it wirelessly from my iMAC.  Can someone lend a hand as to how I can find and map network drives from my mac?
    Mike

    You should see it in Finder under Shared on the left pane.

  • How can I change the hard drive location of the iCloud Drive?

    I am using a SSD for my boot drive, but it's space is limited.
    So I would like to relocate the iCloud Drive to one of my internal HDs, but I see no option to do this.
    Let's hope Apple would make such an obvious option available.
    I don't want to change the location of my entire Home directory, as that would slow down my access to cache files, etc...
    I had one suggestion of using the terminal with an "ln -s" command to create a soft link.  However, it appears the iCloud Drive is store in ~/Library/Mobile Documents.  If I remove this directory or any subdirectory, they are automatically recreated, I assume by some sort of background process. 
    Does anybody know if this is possible, and how to accomplish it?
    Thanks.

    How to use an SSD with your HDD
    If you are going to use an SSD as a boot drive together with your existing HDD as the "data" drive, here's what you can do.
    After installing the SSD you will need to partition and format the SSD using Disk Utility. Then, install OS X on the SSD. After OS X has been installed boot from the SSD. Use Startup Disk preferences to set the SSD as the startup volume.
    Open Users & Groups preferences. Click on the lock icon and authenticate. CTRL- or RIGHT-click on your user account listing in the sidebar and select Advanced Options from the context menu. You will see a field labeled "Home dir:" At the right end you will see a Change button. Click on it. In the file dialog locate the Home folder now located on the HDD (HDD/Users/account_name/.) Select the folder, click on Open button. Restart the computer as directed. When the computer boots up it will now be using the Home folder located on the HDD.
    Another more technical method involving the Terminal and aliases is discussed in depth here: Using OS X with an SSD plus HDD setup - Matt Gemmell. This is my preferred approach because I can select which of the Home's folders I want on the HDD and which I don't want. For example, I like to keep the Documents and Library folders on the SSD because I access their content frequently.
    Be sure you retain the fully bootable system on your HDD in case you ever need it.

  • How can I upgrade the hard drive in my MacBook Air early 2014 11"?

    i have a macbook air with a 128gb ssd drive and want to install a larger drive. where can I buy the drive from and how do I install it?

    At the present time there are no third party PCIe SSDs available.  Until some are produced for sale, the only alternative is to purchase a MBA with larger storage.
    Ciao.

Maybe you are looking for