How can I access the Tabs page in the current window, without opening a new tab?

I like the new Tabs page. I'd like to open it in the current window, without the need of opening a new tab or window.
Is this possible?

You can make a bookmark and set the location to about:newtab to open that page in the current tab.

Similar Messages

How can I set the finder window to open the same way every time?

Everytime I open Finder it goes back to it's default view which is just too small, but I want to set the finder columns and window so that they open the same exact way every single time. I'm tired of resizing everything.
Currently I have to resize every window and column everytime and I think my work is much slower then when I was on Windows because of it.
Is there a setting, script, file, patch, anything, is there absolutely anything I can do to actually control the Finder views and make them adjust to MY criteria and stay that way...

That is a big negative. That does absolutely nothing other then close my window, next time the finder window is opened then the column widths are small again.
In Windows Explorer all your windows are customizable, how do I do this with Finder?

How can I change the default window size of a new message permanently?

The mail window opens up very small and every time I must increase the size manually. I want to be able to set it so it opens larger or at least opens to the saem size as a previous mail window, which is what Mail used to do.
Also, can anyone tell me how to stop that new mail window from opening on the bottom left of my screen? I need to move it in orde to increase the window size. So, 2 default actions that are a psin to constantly deal with.
Is there any guru out there who has had this problem and solved it? Thanks!

http://kb.mozillazine.org/Font_settings_in_Thunderbird

How can I display all bookmarks on left side of window without opening library?

I usually have a bookmarks view (NOT the toolbar) open in the left side of the Firefox window. It shows all my bookmarks, much as the library view does, but not in a separate window. After Firefox crashed, I restarted a "new session" and the bookmarks were not visible. The help files only talk about the bookmarks toolbar, not what I'm looking for.

You can open the Bookmarks in the sidebar via View > Sidebar > Bookmarks (Ctrl+B) 
Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
You can find toolbar buttons to open the bookmarks and the history in the sidebar in the toolbar palette and drag them on a toolbar. 
Firefox 4 has two bookmark buttons with a star in the Customize window. 
One star button has a drop marker that open a Bookmark menu. 
The other star button without the drop marker opens the bookmarks in the sidebar. 
 
* http://kb.mozillazine.org/Toolbar_customization

How can I change the system to stop opening a new page everytime I seek information from that page? It took me 5 pages on the task bar to ask this question.

This week I downloaded the BIOS update from Mozilla and since then my header bar has not been the same. For instance, in order to get to this box, to ask my question, I entered Mozilla.com, then entered "Help" which resulted in a new tab, then "Ask a Question" which was another tab, then still another tab. By the time I got to this page I have 5 tabs open. In the past, a new page was opened and I could always return to the original via the "arrow" in the address bar. More than likely this can be solved with one key stroke, I just don't know what key to stroke.
Thank you!

I'm sorry, but what do you mean by a BIOS update?
Firefox will launch a link in a new tab if the Ctrl key is pressed down during clicking, and will launch a link in a new window if the Shift key is pressed down during clicking. Maybe Firefox is having trouble reading your keyboard accurately. Sometimes pressing Ctrl or Shift several times will help clear that up. In other cases, it could be a compatibility problem with your keyboard, low batteries, or another problem on the keyboard side. And/or, if you haven't shut down and restarted Windows since this problem began, that sometimes helps.
Some add-ons also can change how links behave. Do you have any extensions related to tabs, like Tab Mix Plus? You can review your extensions on the Add-ons page. Either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Extensions. For some, you will find an Options button to inspect their settings.

I have converted a pdf to word. How can I access the Word file from my online account?

I have converted a pdf to word. How can I access the Word file from my online account? When it says 'download the converted file' I choose a location on my PC and click, but nothing happens. It seems that it can only save the converted file to my online account. I went to my online account but I see no way to look for the file

Hey Fabrizio,
You might need to sign up at "https://cloud.acrobat.com/exportpdf" using your Adobe ID credentials to convert your PDF file to Word.
Do you get the 'download' prompt?
Also, you can find the converted files by clicking at the 'Files' tab.
Please try the same using a different browser and check.
Hope to hear from you.
Regards,
Anubha

How can I access the savestore.js contents if the command about:sessionrestore shows a blank box even for already succesfully used backups?

-------------------------------------------------------------------------------------------------------------------------------------------
How can I access the savestore.js contents if the command about:sessionrestore shows a blank box even for already succesfully used backups?
Is there a recent known problem with the about:sessionrestore command or is there any other way understandable to Firefox 29.0.1 through which recover the information stored in the sessionstore.js files.
It seems the command about:sessionrestore is not capable anymore to read the contents of the sessionstore.js file present in the user profile folder.
The box where windows and tabs should be listed is empty.
I tried to paste a few old sessionstore.js files in the user directory while the firefox.exe process was not active, then opened Firefox again and tried to launch the about:sessionrestore command without any result.
I think the files are not corrupted because I used most of them in other occasions and I stored them in folders not connected to the common use of any process.
Also, I already successfully used the about:sessionrestore command in Firefox 29.0.1 in a few other occasions.
I did a "clean reinstall" of Firefox 29.0.1 and the box contained in the tab where about:sessionrestore is executed is still empty even if the files themselves contain such information as tabs location and html addresses.
After this I recovered the profile data I had stored in another folder and this is what you can see attached to this question.
---------------------------------------------------------------------------------------------------------

If I select the "show my windows and tabs from last time" option in the startup settings the contents of any savestore.js file i paste in the user profile folder are opened without any problem.
still, the box in the tab loaded by the about:sessionrestore command is blank and empty, so it's not possible to "de-select" any window or tab. it's necessary to find an editor to modify session backup files which may contain "bad addresses".
does such an editor already exists?

How can we access the file/directory system in the server

Hi friends,
I have made a text editor attached with an audio player for my project.
Both text editor and audio player are implemented in applet and put in to a
jsp page using jsp:plugin. Text editor and player are separate applets running
in the same page and from same server.A client who is using this editor may
want to save the edited text files to the server as well as hear audio files from
directories in the server.
My question is how can we access the file/directory system in the server
like we do in the local machine.When the user cliks save or openfromserver button
in the editor, folder/files in the server must be displayed as we do with FileChooser.
I am using Apache Tomcat 5,wiindows 2000 server, jdk1.5.
manu

You can't access it directly. But your applet can make net connections to the server, and the server can provide that kind of functionality. Generally this is easiest by making HTTP connections and having the server provide the functionality via the web server. (So in your case, JSPs or servlets on the server would list/deliver/create/modify/delete files, and the applets would invoke those JSPs and servlets.

My macbook pro crashed after installing maverick. I lost all my photos however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?

My macbook pro crashed after installing maverick. I lost all my photos however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?

We'll need to know more to beable to help. Do you want to try to restore your photos from your iPhone to your Mac, or try to recover the photos from the old iPhoto Library on your Mac?
What is the situation of your Mac now? In hat way did it crash? A hardware problem with the drive? Does the system not start properly? Does iPhoto not launch? Do you still have the iPhoto Library on your mac or a backup, so we could try to rescue the photos there?
What versions of iPhoto are on your iPhone and your Mac?
however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?
On the iPhone you cannot access the "package contents" - IOS hides the file system from the users. To restore photos from your phone share all iPhoto photos to your Camera Roll, that are not already in the Camera Roll, and then connect the iPhone via USB and import the Camera Roll to iPhoto or Image Capture. Or use any of the other sharing methods described on thos manual page: see: Ways to share photos http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnk7d8f763e
To retrieve photos from a corruptrd iPhoto Library on your Mac we need to know the version number and more about the "crash" you experienced, the state of your mac, the system, the data. Please post back with more details.
-- Léonie

How can i access my docs (pages) in my iCloud from my iPad? I do no have pages in my iPad? help please

How can i access my docs (pages) in my iCloud from my iPad? I do no have pages in my iPad? help please

Why would you want to access your Pages documents on the iPad if you don't have Pages?
If you wanted to email them to someone, you could have done that on the Mac. If you want to edit them on the iPad you need the app on the iPad.

How can I access the Help preferences?

How can I access the Help preferences? I hate the way the Help window stays in front of every other window, so I really need to change it's behaviour.

Mary,
To see the reports button, your workflow user record must be at least Process Administrator (use the admin module to see an individual person's properties, in the Privileges tab I think..)
The backend stores information suchs as where and when a workitem was processed, but it won't contain the information that was populated on the forms, unless you make the fields you need to searchable fields on the process map. Beware, this can add to the size of the database quickly.
All of the available tables are documented in the pdf files that are distributed with the product.
Good luck,
Sanna

How can I access the Attribute Values from the Search Region

Hi all,
I have a table which contains Company id, department id, and PositonId. For a particular Company and Department there may be multiple records.
I have to pupulate a table which contains the position and other details that comes under a particular Department and Position based on the selection in the Three comboBoxes.
Also I have to populate a select many Shuttle to add new postions and records under a particular Department.
I created a query panel *(Search Region)* for the serch and a table to display the data. That is working fine.
Now the issue is I am using a view criteria to populate the shuttle with two bind variables ie, DepartmentId and CompanyId.
If the serach will return a resuktant set in the table it will also pupulate the correct records, otherwise ie, if the if the serch result is empty the corresponding iterator and the attribute is setting as null.
SO I want to access the attribute values from the Search Region itsef to populate the shuttle.
I don't know how can I access the data from the Search Region.
Please Help.
Regards,
Ranjith

you could access the parameters entered in search region by the user as follows:
You can get handle to the value entered by the user using queryListener method in af:query.
You can intercept the values entered as described
public void onQueryList(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
List<Criterion> searchList = qdes.getConjunctionCriterion().getCriterionList();
for ( Criterion c : searchList) {
if (c instanceof AttributeCriterion ) {
AttributeCriterion a = (AttributeCriterion) c;
a.getValues();
for ( Object o : a.getValues()){
System.out.println(o.toString());
//call default Query Event
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
public void onQueryTable(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
private void invokeQueryEventMethodExpression(String expression, QueryEvent queryEvent){
FacesContext fctx = FacesContext.getCurrentInstance();
ELContext elctx = fctx.getELContext();
ExpressionFactory efactory = fctx.getApplication().getExpressionFactory();
MethodExpression me = efactory.createMethodExpression(elctx,expression, Object.class, new Class[]{QueryEvent.class});
me.invoke(elctx, new Object[]{queryEvent});
Thanks,
Navaneeth

I have just acquired an iMac desktop. I want to sign on to my airport wireless network, but cannot remember the password. How can I access the password or reset it. I already use a MacBook Pro and an iPad on the network.

I have just acquired an iMac desktop (about 4 years old). I want to connect to my Apple airport wireless network, but cannot remember the password. How can I access the password or, if necessary, reset it. I already use a MacBook Pro and an iPad on the network and don't want to jeopardize what already works well. I am not all that computer literate.

How can I access the password or, if necessary, reset it.
Read the user manual that came w/your Airport router or you can cross-post in one of the AirPort Forums for instructions.

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

How can i access the EJB from a Webdynpro

Dear all,
How can i access the ejb , from a webdynpro?.
Is there any way to do that?.
I want to write the entire code (business functions) within the EJB and i wan to access the entire methods from a WebDynpro Application.This is the situation.
Please help me to , resolve this problem.(Here im using JDBC Connection .. etc.).
I want to do the basic connection setting's and data retrieval part within the EJB and use that within the WebDynpro..
how can i seperate this two(i mean, i want to seperate the JDBC connections and WebDynpro,i dont want to hard code any connection parameters within the webdynpro code)
So that i want use that saet of particular function's in many webdynpro applications..
(i dont need any help regarding webservice way.)
If anyone can , please help me..
I tried that javabean class , manifest file , that way (importing javabean model).
but im getting errors.
I cant properly utilize that..
So please help me with steps regarding that,,
for javabean
and if any , for EJB also..
with regards
Kishor.G

HI,
Since webdynpros follows Model View Controller Architecture You can access EJBs in webdynpro(views/frontend) infact to connec to database uding JDBC you have to utilise EJB ( opening connection to database closing, and other Business functionality).See this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/unkown/web dynpro tutorial and sample applications.faq#q-7
How to access the Car Rental Web Service?
Regards,
RK

How can I access the Tabs page in the current window, without opening a new tab?

Similar Messages

Maybe you are looking for