How can I actiave a VOFM routine

I m in VOFM TCode. I have an existing routine. But the Active checkbox in front of that routine is unchecked. Also this checkbox is not editable from VOFM. How can I make this routine active.
Thanks for reading. <REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Mar 28, 2008 7:29 PM

are you sure you are in the right forum ?
This is for Business Objects product and your question make no sense in that context

Similar Messages

How can I replace a start routine

Hi Friends,
I am filtering out source data where VALIDTO < SY-DATUM & VALIDFROM > SY-DATUM in a TRFN - start routine
DELETE SOURCE_PACKAGE WHERE VALIDTO < SY-DATUM OR VALIDFROM > SY-DATUM.
I want to delete this start routine, and make this filter condition in DTP level. How can I do this?
Thanks & regards
Ramesh

are you sure you are in the right forum ?
This is for Business Objects product and your question make no sense in that context

How to test VOFM routine for output cntrol-issue o/p when certain conds met

Hai,
I have created a vofm routine 903 for the output type 'ZSH1'.This is for sales order output.
The 903 routine changes the sy-subrc value to non zero if certain conditions met.
My doubt is how to test this vofm routine? where can we check the status of the output processed?
This output is to trigger a smartform.
In my case the output smart form got displayed when I click on print preview even if the condtions met (or) dont met.
Is this the correct way of testing?
Regards,
Bhaskar

Hai All,
Thanks for your replies.
here my question is,
how to test the VOFM (not manual )& where we can check the status of output issued or not issued?
see the step 1.
Step1: goto->va02->from the menu select 'issue output'->select the codition type in the displayed popup->click OK.
after this where can I check the status of the output issued?
or is the way I described in Step 1 is correct or not ?
other way Step 2:
goto VA02->enter order number->goto overview page->from Extras->output->header->edit
in this page maintain the output type & click Save.
after Save , is this the time to check whether the output issued or not? if yes where to check the status?
or again is this the right way to test the VOFM.
Regards,
Bhaskar
Edited by: Mbhaskar_comps on Dec 15, 2010 7:00 AM

How can I know the latency in a sub VI or routine (inline c node) in blackfin module?

Hi, I want to control a transceiver using a BF-537. The two principal taks are programming the transceiver and send/receive data from transceiver. These operation are development with sub-VIs, little routine in C using inline c node, etc. However, I need to know the lantency of each sub-VI or code writing in C; I need to know how much time use these elemnt to finished your function.
If anybody know How Can I to measure the lantecy, I will be grateful...!
regards
The Caribbean

Hello,
The easiest way to benchmark how long operations take on the Blackfin is to insert timing code in a sequence structure to directly measure the timing with the Tick Count function. Bear in mind, of course, that adding this code will itself affect your timing somewhat. Take a look at the example below to see what I mean - you could just repeat this for each operation you wanted to measure.
Message Edited by MattP on 07-31-2007 10:50 AM
Message Edited by MattP on 07-31-2007 10:50 AM
Cheers,
Matt Pollock
National Instruments
Attachments:
benchmark.jpg ‏16 KB

How can I debug a routine created in Deletion of similar requests?

Hello Experts,
I need some help from you. I need to delete overlapping requests and the common
settings you can set are not suitable, so I decided to write my own ABAP routine.
But how can I debug a routine, which is implemented in the deletion of similar requests?
Hope you can help me.
Cheers
Daniel Weilbacher

Please go to the routine code..
In the menu options..u will find an option for breakpoint--set..
The line where breakpoint is set will get highlighted and u will also see a STOP symbol..
then come out of routine..and then run the data load..
this ABAP routine for overlapping request deletion runs before the scheduled data load..
the run shud stop at the set breakpoint and show the routine code..in debugger mode..
cheers,
Vishvesh

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

How to restrict issue the form through VOFM routine

Hi Experts,
I have developed form using adobe form, I need to issue the output only one time, once the output issued again the output should not issue.
I need to control this logic through VOFM routine...how to restrict ?
Thanks in advance.

Srinath,
Use the below option.
VOFM->REQUIREMENTS->O?P Control.
Create a new routine.
In the routine, check the table NAST using application, object key and message type. If you find an entry, set the sy-subrc value to 4 else set the subrc value to 0.
Let me know if this helps.
Thanks,
Vikram.M

How can I call a Method in a Transformation Routine

Hello Experts,
How can I call a Method in a Transformation Routine ??
THNXX

Hi,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6090a621-c170-2910-c1ab-d9203321ee19?quicklink=index&overridelayout=true
It will be help full .
Regards,

How can solve this ORA-03120: two-task conversion routine: integer overflow

Hello everybody,
I'm writing this query "SELECT rowid from <mytable>" and I get this error: ORA-03120
Does anybody know how can i solve it?
Thanks in advice

Here is the cause and action as suggested in the Oracle Error Guide...please see if it helps you to fix the error
ORA-03120:two-task conversion routine:integer overflow
Cause: An integer value in an internal Oracle structure overflowed when being sent or received over a heterogeneous connection. This can happen when an invalid buffer length or too great a row count is specified. It usually indicates a bug in user application.
Action: Check parameters to Oracle calls. If the problem recurs, reduce all integer parameters, column values not included, to less than 32767
Regards,
Murali Mohan

VOFM: how can i check netwr during calculation?

Hi everybody,
When we make a Credit Memo in reference to an Invoice, there is 2 posibilities:
- To make a partial Credit Memo (only some items).
- To make a complete Credit Memo (for the total Invoice amount).
Only in the second case, we have to calculate percepcion condition J1A2.
So, it is necesary to evaluate if i) is created as reference (solved) and ii) if the net invoice amount (VBRK-NETWR) is equal to the net Credit Memo Order.
How can I check that last issue? I have been debbuging the condition (in my case is kobev_983 in VOFM -> Requirement -> Pricing -> 983) but I can't find a variable with the total net amount to check it. I've tried also with XKWERT but the value is the corresponding with the first position.
Thanks for your help!
Edited by: Alejandro Willers on Jan 29, 2009 2:36 PM

Thank you all to follow this up.
I have done a Finder Find with search for visible and invisible files activated, but no results that specifies the 524MB from during the event.
Very strange?
I use iStat Pro already for many years, so i don't think it's a mistake from that application.
Does anyone know that the MacOS X cron job, that is activated during night (when your computer is on), will go on the network?
and/or
Does anyone know if theirs a clear log with all network activity from past night?

How can data load time can be optimized using routine

Hi,
Data laod is taking too much time . How can data load time can be optimized using routine
Regards,
Vivek

Hi Vivek,
If you have code wirtten, please try to post the same, so that i cna help you in optimising it and give it you...
General Guideleines.
1. Dont use select statement inside the loop.
2. where possibel try to use Read statement with Binary Search Option and avoid using loop statement.
3. Try to avaoid joins if you are using any, isntead use For alll entries.
4. Try When u use for all entries try to make sure that your internal tbale is not initial.
5. Try to Sort and delete adjacent duplicates from internal tables wherever needed.
6. Use clear statement whererver required.
Regards,
Nanda.S

VOFM routines activation

Hi Sap Guru's,
As per my client requirement, I have maintained new routine in VOFM by using below navigation:
routine names are 902 & 903 & their includes are RV64A902 & RV64A903.
Now, when we move the changes to quality server then the routines are showing in VOFM but in standard program RV64ANNN it’s not
available. (so when we run sales order then the includes 902 & 903 is not triggering)
So I ran the standard program RV80HGEN. (to activate VOFM routines)
Then the routine names are populated into standard program RV64ANNN. (when we run sales order then the includes 902 & 903 is triggering & its working as expected)
But same changes we moved to production server, so if I will run the same standard program RV80HGEN in production environment then all other
customized routines also activating including my 902 & 903 routines.
So please suggest me, how can I will overcome the situation.
I have to activate my routines 902 & 903 only in production server.
Thanks in advance.
BR,
Shabareesh

Hello,
but still I don't understand your perplexity:
In order to avoid all confusions, we have planned to do below steps:
Capture our routines in new TR with standard program RV64ANNN (Development server)
Then we will move the changes to QAS server & check the result
If result would be fine, then we will move the TR to PRD.
this should be the standard and "best-practice" approach for any kind of change.
Request you to confirm on above point or we will go ahead to run RV80HGEN program directly in PRD.
When you transport a newly created routine, you always need to run program RV80HGEN to be sure that it's correctly and completely activated. But it won't do any harm. Unless you moved to Production environment a routine that you don't want to activate: but this is not the correct and advisable approach.
Best regards,
Andrea

How can I share printers using a non apple router, imac to ipad?

Newbie in osx, but experienced in linux.
My new imac has 3 printers setup for sharing, but ipad 2 / iphone 4 fail to see them. I am using the belkin router that I owned already, instead of buying an Airport.
I found a solution at askubuntu.com Q 26130 at http://askubuntu.com/questions/26130/how-can-share-my-printer-so-that-i-can-use- it-with-airprint
I setup a linux machine on the network, with no physical connection to any printer. The 1st, an hp fax psc has a usb to imac, as the 2nd, an hp psc, the 3rd printer is an epson wireless, which is only connected on the network by wifi to the belkin router. I'm certain the imac "sharing" is properly setup, because the linux machine has no trouble finding the printers. Only the ipad / iphone have a problem.
Once I put the linux machine (with the above changes) on the network, everything works as desired. I can print on the ipad / iphone to any of the 3 printers, using the built in Airport printer routine (not the epson or hp apps). And the imax and linux machines can also print on all 3.
So, I suspect the imac isn't telling the router to display the printers on the network in a way that iOS can see them. I know it would work if I owned an Airport, but I'd rather not spend that much right now.
I'm sure someone knowledgable in OSX might have an idea where to stick an Airport definition file, created from the python script in askubuntu, that could solve this without having to run the linux laptop all the time. Any ideas?
TIA

It's possible to use free software (Virtualbox and Ubuntu) to fix the broken iOS 5 Airprint printing with non supported printers. Here's a fix that works on my imac, but should also work on even a windows pc.
My setup is a lion imac with 2 non-airprint supported usb printers attached, a belkin wifi router that provides network connectivity for my imac, ipad, and iphone.
Install ubuntu 11.10 in a virtualbox vm. Specify to use the "Bridged Adapter" with "en1: WiFi (AirPort)" for the network hardware. Make sure the imac's usb printers are setup with sharing. On ubuntu, select System Settings > Printers and add your imac's shared printers to the list. Then start ubuntu's firefox and set "localhost:631" in the address. On the administration tab, under the Server section, check "Share printers connected to this system" and hit Change Settings button to activate it. Go back to ubuntu's printer setup, and right click on each printer and check that the properties Policies tab does not have any messages about it being unshared. If so, then go back to firefox and make sure the Server sharing checkbox is enabled. It may help to reboot.
Fire up virtualbox to be able to use AirPort printing to your imac's usb printers, when you want to print from the iphone or ipad. This also works on iOS 5.
Only problem is error message from iphone to check the printer for errors, even though it actually prints ok.
references:
http://askubuntu.com/questions/26130/how-can-share-my-printer-so-that-i-can-use- it-with-airprint
https://lists.ubuntu.com/archives/ubuntu-devel/2011-June/033611.html

How can i achieve tis in Bex Query Designer

Hi Experts,
Please advise on how can i achieve this in Query.
I got Location,Material_ID,Price and Change_Date.
(Change_Date is defined as both CHAR & KF in cube)
(Change date is on monthly basis they execute a programe in non sap source system to update the prices of material)
The Price of material tends to change or may not change ...
Every month we get a record from source system on material price
My requirment is to bulid a report that show
LocationMaterial_IDCurrent Price and Previous Price
Please advise how can i develop this report

While loading into cube, normally you map price field coming from datasaource to
infobject ZPRICE_CURRENT   in your infocube.
So in transformation you map like this
price -
> ZPRICE_CURRENT
Now, Maintain another keyfigure in cube ZPRICE_PREVIOUS.
That is not mapped with anything.But is assigned a value in the Start routine
which just runs before, the transformation.
In the start routine write code something like this :
Read current value of price from cube for that Material.
(Select ZPRICE_CURRENT into price_curr from cube where material = DATA-PACKAGE- Material   )
if DATA_PACKAGE-price <> price_curr   ( if new_price <> old_price)
ZPRICE_PREVIOUS = price_curr. (storign present value of price in the cube )
endif.
Now save the Start routine. When mapping the fields in the transformation
dont map anythign to ZPRICE_PREVIOUS as it is already filled in teh start routine from the above code.Leave it unmapped.
The below mapping is normally maintained without change..
price -
> ZPRICE_CURRENT
If you find this to be useful ..please do the needful (points)

From the Top: How can I fix my iMac after failed 10.4.3 update?

I have an iMac G4 (hemispheric base) with 512 extra ram (from Apple). I used software update to upgrade to 10.4.3 After an apparently successful download, the computer refused to reboot. It would get to the desktop (with my usual icons visible) but then the spinning rainbow wheel would never stop.
== I tried various combinations of rebooting and unplugging. No luck.
== I tried using the Mac OSX install disk to repair permissions. No change.
== I tried using the install disk to repair the disk. It said I had an unrepairable error on my disk.
== I tried booting in safe mode. Computer would always turn itself off.
== I tried booting in single user mode. It would show a text screen but not really start.
== I tried using disk warrior ($100). It performed a lengthy repair. Computer now behaves a bit differently (e.g. in safe mode it gets to the log in screen and then hangs rather than turning itself off and when I try to start as usual I still see my custom desktop background but not my icons) but it still will not start. Also, frighteningly, the disk drive will no longer accept the OSX install dvd -- it just spits it out.
So, I feel stuck. I need some of the data on the computer (including some digital photos of hurricane Wilma damage for insurance purposes) but even if I were willing to do an install and erase, how can I, since the computer does not accept the dvd anymore?
I know I should have fully backed up and repaired the disk with the install disk ahead of the upgrade. I naively believed the download to be routine. However, I do need the data and do need the computer. Can anyone help?
Thanks to everyone.

Hi
My Powerbook was the same. Only fix is to reinstall OSX from the install CD but be sure not to pick the Format and install clean. Once you boot with the install CD pick the preserve user data and settings.
On My machine the reinstall looked perfect. My network, email, files and all the programmes were all there. Most apps worked fine but Adobe CS2, Virtual PC and NetBarrier all needed reinastallation as they reported a few files or registration was missing. I went for the 10.4.3 upgrade again and it worked fine.
Good luck
D

How can I actiave a VOFM routine

Similar Messages

Maybe you are looking for