How can I activate Built In Ribbon Tab (i.e. TabHome) from the custom ribbon tab ?

Yes, lots of informations are there about how to activate the custom tab from out there.
But, there are no such informations, How to activate the Built In Ribbon Tab (i.e. TabHome) from the custom ribbon tab.
I am with VS 2010, Word 2010, Win 8.1
I am not good at XMLs. Tell me with designer ways Please.
Thanks !

Hello,
The Ribbon Ui designer doesn't provide anything for that.
You need to use the
ActivateTab method of the
IRibbonUi interface. See
Ribbon Extensibility in Office 2010: Tab Activation and Auto-Scaling for more information. You can find the built-in control IDs in
Office 2013 Help Files: Office Fluent User Interface Control Identifiers .

Similar Messages

  • HOW CAN I DELETE AN EVENT WITHOUT  HAVING TO SELECTING IT FROM THE LIBRARY?

    I have a big problem.
    I want to delete an entire event from my library because everytime I select it imovie freezes and then close itself up. So I have to re-open imovie again. And when I want to select that particular event again the same problem occures. So I can not select that particular event. Therefore I can take NO action on this event.
    HOW CAN I DELETE AN EVENT WITHOUT HAVING TO SELECTING IT FROM THE LIBRARY?
    (Everytime I select it imovie closes itself up)
    All other events work fine. I believe The footage had a problem from capturing. but now it's in my computer and i can't open it.
    Please help me, I don't need this event, I can't open it therefore I can't use it and it takes place on my hardrive for nothing.
    Thank you

    One can delete it from one's computer. In the finder go to homeuser, movies, imovie events, delete the footage.
    Then reopen iMovie and see if that helps.
    Hugh

  • HT4628 How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)?  There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

    How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)?  There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

    How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)?  There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

  • How can I make an external link (to a different folder) from the main menu?

    How can I make an external link (to a different folder) from the main menu?

    If the folder is outside the Muse page, you will have to insert manual HTML to define a more complex URL like e.g. ../_stuff for going one level up and then into a folder called "_stuff" The deeper you are in the hierarchy, the more ../ you will have to add to climb up.
    Mylenium

  • How do I delete more than 1 slide at a time from the custom slide show in Elements 8

    How do I Delete more than 1 slide at a time from the custom slide show in Elements 8?

    How to Mass Delete Emails from iPhone and iPad Inbox (with video)
    http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
     Cheers, Tom

  • How can I fix my Firefox browser so that PDF files from the Internet do not blur and go out of focus?

    When I try to open a PDF document from the Internet, it opens, with sharp resolution; however, within a few seconds, it blurs and seems to have multiple copies being shown on top of each other (ever so slightly mis-aligned). Yet, when I use any other browser, the document opens without losing sharpness.
    Also, opening a saved PDF document in Adobe Reader does not cause any loss of sharpness.
    Running updated Windows XP; Adobe Reader updated; and Firefox updated.

    Firefox's built-in PDF viewer overlays a transparent layer of text over a graphical image so you can copy/paste. It doesn't always line up pixel-perfectly, so if the text is not transparent for some reason, you will see double text.
    Could you try switching to the Adobe Acrobat plugin? This article has the steps: [[How to disable the built-in PDF viewer and use another viewer]]. Does that one work correctly?

  • How can I get my emails back into my hotmail account from the Mail app

    Dear Apple support team
    I started using the Mail app some weeks ago because I apparently needed it, to be able to open an invitation for an iCloud shared photo folder. As soon as I registered my email into the Mail app all my emails from my hotmail account where deleted from the hotmail server. I really hope that this is possible to revert because if not, it'd be a catastrophe for me. I use that account from several devices for work, and I need those old emails in the server to be able to work again!
    I'd really appreciate any advice on this!
    Many thanks,
    Pier

    You can use the iPhoto Export feature to do that. Furthermore, it's the best way if you want to keep the quality of the pictures.
    To put the photos in the Pictures folder, first open iPhoto and then, select Edit menu (on the menu bar) > Select All. Finally, go to File menu > Export, and export your photos to the Pictures folder, so they will appear on all Time Machine backups you create since then

  • How can I set up imessage on iPhone to send messages from the name of number but not e-mail.

    I can set up iMessage on Macbook to send from the name of number, but can't do it on my iPhone after upgrading to 6.1

    If your iPhone and iPad are both running iOS 6, and your iPhone successfully registered it's phone number in Settings>Messages>Send & Receive, all you should have to do on your iPad is go to Settings>Messages>Send & Receive and sign in with the same Apple ID you are using on your phone. 
    If it is, and it still isn't working, try going to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in.

  • How can I activate Dreamweaver CS3 on a second Apple Mac when the original Mac has gone wrong?

    I have Dreamweaver CS3.
    I have used it on my laptop and my desktop Macs.
    In the past, I have simply deactivated it on one Mac to use it on the other.
    My laptop, which has Dreamweaver activated on it, has a graphics card problem and is in for repair.
    I cannot use the Dreamweaver installed on my desktop computer because I cannot de-activate it on the laptop (which is being repaired by Apple and which Apple say they can't access to de-activate it, because there is no screen display).
    This is obviously going to be a future problem if one of the Macs blows up while Dreamweaver is activated on it. I will not be able to use the Dreamweaver I bought nor service my website.
    Help! ?

    You could always download the trial version until the laptop is fixed. But, I don't know if you can even save a file from CS5 that would be compatible in 3.  It is sucky to not have the single user, two activation license. This is one of the things I applaud Adobe for. Most major software licenses are meant for a single machine, and not so concerned about users - that they know it's unlikely that several users would share a machine.it does happen, but it's also quite an inconvenience.  The two activation solution takes into account a more realistic scenario for a single user. The other option being used with some programs is the dongle, which I also like, even though many others don't for various and valid reasons. Anyway, I just looked at a page in cs4 and it doesn't really save in any particular version, HTML is HTML. I just don't know what will happen if someone goes to open it in CS3 - will it open less any CS4 code, not open, erase the code on save? Will it be the same for 5? Just wondering as you may be able to use the trial.

  • How can an image be displayed by using raw data read from the serial port?

    Hi there,
    I am using an embedded camera to take photos. To operate it i send commands to it via the serial interface. I have received all of the image data back through the serial port and can view it as hex data in a string. The image data is 16bit colour RAW data at 160x120 resolution meaning i have 38400 bytes of data (160x120 = 19200. 19200*16 = 307200. 307200/8 = 38400). I want to be able to display this data as a picture, but cannot figure out how to do it. Can someone please point me in the right direction? i have been fiddling about with lots of the pixmap functions but no luck. Do i need to put this data in to a 2D array first?

    Yes, first convert it into a 2D array of pixel values. From there you can convert it into an image to display it in a picture control.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How can I execute a command inside of a VM client from the VM host?

    Hi!
    I'm working on a set of scripts to automate MOC classroom installations using MDT and PowerShell. Sofar I've been able to automate everything except for the Rearm needed within the VM Clients. Is there any command (preferably PowerShell) that I can Launch
    on the VM host with which I can execute a command within the VM Client?
    Regards,
    Gerrit Deike
    If you think your to small to make a differnce, try going to bed with a mosquito in the room...

    If you wanted the pings to run in parallel, you could have this applet configure another applet to do the pinging, then remove it on the last run.  This will require an amount of programmatic logic, though.  If you wanted to keep things a bit simpler, add another applet that runs at 22:00 that configures a watchdog pinging applet, then a third applet that runs at 22:10 that removes the pinging applet.
    When it comes to embedded quotes when you configure your nested pinging applet, you'll need to use $q to stand for the embedded quotes.  You'll also need to configure:
    event manager environment q "

  • I upgraded from an iPhone2 to an iPhone4s now I can't sync the ringtones from music that I purchased from itunes to correspond with my contacts.  How can I get it where I know who is calling from the ringtones I used to have?

    I upgraded from an iPhone2 to an iPhone4s and now my ringtones are gone.  I still have the music that I  bought from iTunes that I made the ringtones from but I can't seem to get anything to work.  Help!  Thanks.

    For the font problems, try the "Safe Mode" suggestion in this old thread:
    http://discussions.apple.com/thread.jspa?threadID=1956989&start=20
    ...Found by doing THIS. Also see this Apple doc:
    _Mac OS X: What is Safe Boot, Safe Mode?_
    ...Found by entering "safe mode" in the first field here:
    http://support.apple.com/kb/index?page=search

  • How can i create a gradient with four colours that graduate from the four corners of a rectangle?

    I've been trying various ways of doing this and nothing's worked so far; I've tried blending two gradients, tried blending four different colours but no luck with that either.
    What I'm looking to do is exactly what is displayed when you double click on the colour picker and you select R, G or B. Any help will be much appreciated.
    Ré

    I'd tried using two linear gradients but it didn't give the results i wanted, but i've sorted it out using gradient mesh. Thanks!

  • How can we disable "Powered by" text in email campaigns sent from my customer's sites?

    This option is set from within the 'settings' link within your partner portal. Partner Portal -> Dashboard ->Edit Partner Settings Please take a look at this screenshot: http://screencast.com/t/uTP9Oyftee
    Please keep in mind that this is not site specific and will affect all your sites under your partner portal. If these fields are blank, this reverts to the standard Business Catalyst powered by message. In this case, if you want this to be blank, you will need to enter something like <span></span> in the html field and a period in the text field. This is so that these field values are not null which will revert to the BC messages.

    I feel funny replying to myself; I cannot remove this discussion and at any rate, I guess if someone else has this problem, they'll be pleased it has not been deleted.
    So, I managed to fix this all on my own. Obviously the difficulty-level is about as low as it gets:
    After updating to iOS 6 last night, I was playing around in the settings of my phone, when I came across this, the iCloud for Settings > Mail, Contacts, Calandars > Accounts > iCloud:
    All I had to do was to turn Mail off. This leaves the Cc/Bcc, From field empty in my phone's Mail app--just the way I wanted it!

  • How can i get my hp office jet j4550 to print from word 7?

    How can I get my HP Office Jet j4550 to print from the Microsoft Word 7? I downloaded the drivers for the printer and reinstalled Microsoft Word 7. 

    Do you mean Windows 7?
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

Maybe you are looking for