How can I activate my InDesign program?

Trying to open my copy of AdobeInDesign CS2. Every time, I get this message: "Activation was unsuccessful because the activation server is not available at this time." I tried to activate by phone, but the recording says that phone activation is no longer an option. I cannot open my program. HELP!!!

Thanks to both of you, Peter and Larry...I found the serial number, and I am fully installed, up and running! Have a great day, and thanks again for your prompt responses and excellent assistance!
Debbie

Similar Messages

How can be activate a JFram program automatically?

when i run JFrame program, I have to activate frame window by clicking on maximaize button. what should i do so that frame can activate automatically?

You don't do anything, the frame is will be active automatically.
Read the [Swing tutorial|http://java.sun.com/docs/books/tutorial/uiswing/TOC.html] for plenty of working examples.

HT201407 my device is not registered as part of the iPhone developer program. how can i activate my iphone 5

my device is not registered as part of the iPhone developer program. how can i activate my iphone 5

actually i never stole the software,i was told to upgrade to this beta 7 to fix my phones problem with signal,i did not know it had to be paid for,or that it would break my phone even more as i am no developer and know hardlys anything about phones never mind developing them ! if i knew for one second that it had to be paid for i would have not got it,but if that is the case,why dont i have to pay for all my other updates ive had on my phone?apart from that,does anyone know how i can get my phone back to 6.1.3 firmware.thankyou for any help offered.now i think i will go and give this phoneshop assistant a peice of my mind as his reccomendation has totally wrecked my phone :/

How can I activate my account?

I had 2 accounts by mistake (I was paying twice for the creative cloud membership), then, I had support from Adobe and they canceled 1 of the accounts.
Now I'm facing this problem, the programs (Photoshop, InDesign and illustrator) will expire in a few days.
How can I activate my account and use these programs normally?

Hi,
In addition to Ani's suggestion, you may refer to the help document below:
Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
Regards,
Sheena

Subscription Acrobat Pro DC, Adobe Export PDF, Adobe PDF Pack. How can I activate the need of licens?

Subscription Acrobat Pro DC, Adobe Export PDF, Adobe PDF Pack.
How can I activate the need of licens?
The reason can be Adobe policy, I have change computer, added products, stop using any product and so on.

Hans,
When you no longer need the Adobe software on a computer or you wish to move it to another one, you should deactivate the software.
See this link: how to deactivate software. Installation rules will let you install the software on two computers of the same platform (both windows or both mac) but you are limited to running it on only one at a time. If you have only installed it once, you should be able to install it on the other computer. If you have already installed the software twice and you don't have access to your previous computer or you upgraded your computer's hardware, replace a hard drive, upgraded your operating system, or reformatted your drive before deactivating your software, you can ask Adobe Support to help you deactivate the software from the machine. Just have your serial number or Adobe ID ready, and then contact support. Then you can install the software from the links below and enter your serial number to re-activate the software.
If you need to find your serial number, sign in to your Adobe account. On the Manage Accounts page that appears, all of your registered products and their serial numbers are listed in the Plans & Products section. For more information on locating serial numbers, or on registering a serial number, please see Find a serial number.
Pattie
Download software here:
Downloads
Acrobat: XI, X | 9,8 | 9 standard
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard
Downloads for older versions
Creative Suite CS5.5 | CS5 | CS4 | CS3
Acrobat X | 9, 8
Photoshop Elements 11, 10 | 9, 8 , 7

How can I activate an old version of Dreamweaver on a new computer? (2004 version)

I had Dreamweaver 2004 on my old laptop which recently crashed. I need to transfer the program to my new computer. Online activation has been shut down for this version. How can I activate it?

Keep in mind that 2004 software is more than a decade old now. Adobe no longer supports it. And it was never intended to run on modern operating systems so you may experience problems. Also, web standards have changed a LOT in 10 years. This might be a good opportunity to update your software.
You can try the Creative Cloud free for 30-days to see how you like it.
Creative Cloud pricing and membership plans | Adobe Creative Cloud
Nancy O.

HT204380 I am living in uae i need the face time but its not installed how can i activate it

any one can help me how can i activate face time in uae
<Edited By Host>

facetime is made through a phone call on an iPhone4s, it is installed, check settings on your phone.
iPods have a separate FaceTime application because they do not use the phone application.
You can download FaceTime management programs for your phone for free through the App Store if youd like.
place a call to a contact with just an email address listed (they have to have a facetime capable device) and you both have to be on wifi connections
and as mentioned above, some places restrict certain services (like china)

My computer crashed; how can i activate my product on my new computer

My computer crashed; how can i activate my product on my new computer
thnx

wim laporte
What version of Premiere Elements do you have and on what computer operating system was it running on and will it be running on?
On how many computers do you already have this same purchased activated serial number? Assuming just the computer that crashed?
If just that one crashed computer, then just install the program from your installation files or installation disc.
But, make sure your installation files or installation disc for the crashed computer will be supported by the new computer.
If you already have the same purchased activated serial number on two computers (crashed and another one), then you will need to deactivate
this purchased activated serial number for the other non crashed computer before trying to install on the new computer.
We can give you more details on Deactivation once we know the program version.
Adobe allows the purchased activated serial number on no more than 2 of your computers. And you cannot use them at the same time.
Please review. If any questions or need clarification, please ask.
Thank you.
ATR
Add On...If more sorting out is required, then Adobe will need to do it since it is the only one to take care of activation issues. We are not Adobe.
Rather user to user forum.

How can i find the printing program?

hi
i have sap script how can i find the printing program ?
ami

ami bardogo wrote:
hi
what is the different between the commands 'break' and 'break-point'
thanks,
ami
h2 Breakpoints h2
Apart from being able to execute an ABAP program in the Debugger, you can also start the Debugger call by the choosing a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For more information, refer to the chapter Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
A user-specific breakpoint is inserted in the source code as an ABAP statement using the keyword BREAK-POINT. A non user-specific breakpoint is set in the ABAP Editor using the BREAK user name statement.
Directly set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger by double-clicking a line, for example. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statements
The Debugger stops the program immediately before the specified statement is executed.
Breakpoints
at subroutines
The Debugger stops the program immediately before the specified subroutine is called.
Breakpoints at function modules
The Debugger stops the program immediately before the specified function module is called.
Breakpoints at methods
The Debugger stops the program immediately before the specified method is called.
Breakpoints at exceptions and system exceptions
The Debugger stops the program immediately after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are always user-independent if there is no specification of a user name. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application when program execution is always to be interrupted at the same place. For more information, refer to the chapter Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints because you can deactivate or delete them at runtime. They have the following advantages:
·        You do not have to change the program code.
·        You can set them even when the program is locked by another programmer.
·        You can define a counter that only activates the breakpoint after it has been reached.
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For more information, refer to the chapter Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they remain in effect during the entire user session if they are saved by choosing the menu path Breakpoints ® Save in the ABAP Debugger. For more details on the subject of user sessions and modes, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
For further information on special breakpoints, refer to:
Breakpoints at Statements
Breakpoints at Subroutines
Breakpoints at Function Module Calls
Breakpoints at Methods
Breakpoints at System Exceptions
h2 page break h2
WINDOW TYPES
When defining a layout set window, you must select a window type for the window. You can choose between three types:
Constant windows (CONST)
Variable windows (VAR)
Main windows (MAIN)
CONSTANT WINDOW
A window of type CONST has the same contents and size on all layout set pages, on which a corresponding page window is defined. This allows the processing of the window contents to be optimized internally.
Page windows whose allocated window is of type CONST must have the same size throughout the layout set. If a window of type CONST is full, all remaining text the application program wants to output in this window, is lost. Constant windows do not trigger a page break. In other words: all text exceeding the window size is simply truncated.
VARIABLE WINDOW
The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different layout set pages.
As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike. The only difference is that constant windows have the same size throughout the layout set.
MAIN WINDOW
Each layout set must have one window of type MAIN. Such a window is called the main window of the layout set. For SAPscript layout sets, the main window has a central meaning:
It controls the page break.
It contains the text body that may cover several pages.
It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the layout set. The SAPscript composer thus avoids reformatting of the text after each page break.
If a page does not have a main window, the system implicitly processes all other windows of the page and continues with the subsequent page. This page must not call itself as subsequent page (recursive call), since this would produce an endless loop. In such a case, SAPscript terminates the output after three subsequent pages.
HOW THE COMPOSER WORKS
The composer or layout set processor is the central formatting module for the print output. It prepares the texts for the different output devices by using the allocated styles or layout sets.
Processing a layout set happens in a certain order. You must know some facts concerning the different window types, the setting of subsequent pages, or the dynamic control from within the print program.
Page control in layout sets
Define subsequent page statically
Define subsequent page dynamically
Format a layout set page
PAGE CONTROL IN LAYOUT SETS
SAPscript automatically triggers a page break as soon as the main window of one page is full. To be able to execute the page break, the system must know on which subsequent page to continue outputting the text. You can specify the subsequent page either statically when defining the layout set, or you can set the subsequent page dynamically during layout set output.
If the subsequent page is not specified, SAPscript automatically terminates printing, thereby ignoring any other output statements of the application program.
DEFINE SUBSEQUENT PAGE STATICALLY
You define the subsequent page statically with the layout set maintenance transaction. First, specify the start page in the layout set header. The system automatically calls this page whenever the layout set is started. With this page, or, more correctly, with the page window of this page, the text output starts. For each page, specify the subsequent page in the page definition. After a page break, the system continues text output on the subsequent page defined for the last page. By specifying start page and subsequent pages, you can define a page sequence.
DEFINE SUBSEQUENT PAGE DYNAMICALLY
The page sequence set in the layout set definition can be changed by the application program dynamically at runtime. If you want the layout set to start with a page other than the one defined in the layout set header, specify the desired start page using the parameter STARTPAGE when you call the function module START_FORM. However, this new start page is valid only for the current call of the function module.
If you want to break to a subsequent page other than the one specified in the page definition, use the control statement NEW-PAGE to set the name of the new page.
NEW-PAGE .
NEW-PAGE ends the output on the current page. The new subsequent page is only valid for the current call of the control statement. You can either include the control statement explicitly into the text of a text element or pass it to the layout set output using the function module CONTROL_FORM.
FORMAT LAYOUT SET PAGE
The process of formatting the output is controlled by the text contents in the BODY area of the main window. If the main window is completely filled, or if the control statement NEW-PAGE appears in the main window, the system executes a page break. Only at this point in time the system formats the contents of the windows of the other types and replaces the variables with the current values.
For each other window, the system first outputs the default text element, if it exists. Then it processes and formats the list of the active text elements of this window, which you set using the function module WRITE_FORM with the parameter FUNCTION (SET, APPEND, DELETE). Any text that does not fit into the page window is truncated.
As a consequence to this processing order of the composer, the reservation of space for the TOP and BOTTOM areas must be made beforehand. If the BODY area of the main window already contains text, a new text output to the TOP area does not appear on the current page but on the subsequent page in the TOP area. The same applies for the BOTTOM area. If the BODY area is filled to such an extend that the new BOTTOM text no longer fits into the current main window, this text appears on the subsequent page in the BOTTOM area.
A frequent error in application programs is that for the subsequent page (for example, NEXT) of a layout set no main window is defined. If the formatted text of the previous page did not fit into the corresponding main window , the composer searches the subsequent pages for a main window to output the text remainder. However, if the subsequent page of NEXT is NEXT again, the composer encounters an endless loop.
To be able to create correct page breaks in longer text, you should define a main window on each layout set page.
LAYOUT SET CONTROL
To output SAPscript layout sets, in the print program you must always start the output with OPEN_FORM and end it with CLOSE_FORM. The function module OPEN_FORM initializes the SAPscript composer and opens the specified layout set for subsequent output. The system combines all output for this layout set up to the CLOSE_FORM to one print request. If CLOSE_FORM is missing, nothing will be printed.
To output data in a layout set, you must use the SAPscript function modules WRITE_FORM, WRITE_FORM_LINES, and CONTROL_FORM. You can use these function modules any number of times in any order between opening and closing a layout set.
You cannot use the ABAP/4 statement WRITE to write output to a SAPscript layout set.
Several print requests
Start a layout set again
Switch layout sets
Find layout sets
SEVERAL PRINT REQUESTS
Within one transaction, you can open and close several layout sets using OPEN_FORM and CLOSE_FORM, however not simultaneously. You can use parameters in the OPEN_FORM to control whether the output is stored in the same print request. But also the SAP spool decides, depending on several plausibility checks, whether new output is appended to an existing print request or whether to create a new print request anyway.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
You cannot combine ABAP/4 list output and SAPscript output in one print request.
START A LAYOUT SET AGAIN
Usually a print program does not print only one urging letter or one account statement, but several layout sets for different customers. To have the output for each customer begin with the start page of the layout set, you must start the current layout set again and again.
To start a layout set again, you must first end the current layout set and then open the layout set again. Within one print request, first call the function module END_FORM. It executes the final processing for the current layout set. Then start the layout set again using START_FORM. Output then begins again on the start page of the desired layout set.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION CLOSE_FORM
If you use START_FORM and END_FORM, you must not specify a layout set for OPEN_FORM. However, in this case you can use the SAPscript output functions only after opening a layout set with START_FORM.

I did not deactivate a photoshop cs6 before there was a new hard drive installed with a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be

I did not deactivate a photoshop cs6 before there was a new "C" hard drive installed on my computer and a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be appreciated.

If it's the same machine (same CPU) there should not be any need to activate. The actiovation is tied to your CPU.
If you run into problems, then:
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

HT201407 hi..I cant activate my Iphone 5. I bought this from someone who cant remember her apple password and even the email address that she used to set up the account.What am I gonna do now....How can I activate my Iphone. what are my options...pls help

hi..I cant activate my Iphone 5. I bought this from someone who cant remember her apple password and even the email address that she used to set up the account.What am I gonna do now....How can I activate my Iphone. what are my options...pls help me.thank you

Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
hannibalfromlemery wrote:
.I cant activate my Iphone 5. I bought this from someone
The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it.

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activ

How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP? I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.

The new serial number is to the right of your chosen download.

I have made with iweb a website on my macbook, now i want to change it, through my imac, how can I get in the program , which is on the mac book. On both computer I have Lion

i have made with iweb a website on my macbook, now i want to change it, through my imac, how can I get in the program , which is on the mac book. On both computer I have Lion

You need to transfer your domain.sites file from your MacBook to your iMac. This is the file where iWeb stores all info and can be found under User/Library/Application Support/iWeb/domain.sites.
Transfer this file from your MacBook to the same place on your iMac and double click the domain.sites file and iWeb will open it on your iMac and you can update your site from there too.

HT1414 how can i activate my iphone 3gs after upgrading to ios6? it could not activate....

how can i activate my iphone 3gs after upgrading to ios6? it could not activate....

If your phone was previously hacked to unlock it, when you updated the hack was removed and it's re-locked to the original carrier. The phone will now activate and operate only with that original carrier.

How can I activate multiple tags at one time?

How can I activate multiple tags at one time?

I'm pretty sure you can run this on a sub tree of /etc/tags
http://dev.day.com/docs/en/cq/current/wcm/page_publish/tree_activate.html

How can I activate my InDesign program?

Similar Messages

Maybe you are looking for