¿HOW CAN I ACTIVATE THE COUNTER OF BYTES IN MY BLACKBERRY?

Hello: I would like to know if it´s possible to activate the counter of bytes in my BB.
Thanks a lot.

Greetings, and welcome to the forums!
You shouldn't need to activate anything. Simply go to Options > Memory, and you'll be able to see what's available on both the phone and memory-card.
"Cats may taste like chicken, but they have more bones than rabbits."
Blackberry 101
Tips & Tricks
Videos to learn from on youtube

Similar Messages

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

I have Adobe Photoshop CS5 installed in two computers. The hard drive of my home computer crashed and I had no time to deactivate the software. The hard drive needed to be formatted. How can I activate the software CS5 again ? Thank you for an answer.

I have Adobe Photoshop CS5 installed in two computers. The hard drive of my home computer crashed and I had no time to deactivate the software. The hard drive needed to be formatted. How can I activate the software CS5 again ? Thank you for an answer.

If it's the same computer, same CPU and same HD, no de-activation or re-activation should be necessary.
Install from scratch and apply all updates manually.
Please do a forum search. I and others have repeatedly answered the question about failed updates of CS5 a whole bunch of times recently.
Bottom line: the Adobe auto updater is utterly useless in CS5 and prior versions. You need to download the updates and apply them manually yourself.
I and others have even supplied the links for Mac and Win, which you haven't even bothered to specify.

Subscription Acrobat Pro DC, Adobe Export PDF, Adobe PDF Pack. How can I activate the need of licens?

Subscription Acrobat Pro DC, Adobe Export PDF, Adobe PDF Pack.
How can I activate the need of licens?
The reason can be Adobe policy, I have change computer, added products, stop using any product and so on.

Hans,
When you no longer need the Adobe software on a computer or you wish to move it to another one, you should deactivate the software.
See this link: how to deactivate software. Installation rules will let you install the software on two computers of the same platform (both windows or both mac) but you are limited to running it on only one at a time. If you have only installed it once, you should be able to install it on the other computer. If you have already installed the software twice and you don't have access to your previous computer or you upgraded your computer's hardware, replace a hard drive, upgraded your operating system, or reformatted your drive before deactivating your software, you can ask Adobe Support to help you deactivate the software from the machine. Just have your serial number or Adobe ID ready, and then contact support. Then you can install the software from the links below and enter your serial number to re-activate the software.
If you need to find your serial number, sign in to your Adobe account. On the Manage Accounts page that appears, all of your registered products and their serial numbers are listed in the Plans & Products section. For more information on locating serial numbers, or on registering a serial number, please see Find a serial number.
Pattie
Download software here:
Downloads
Acrobat: XI, X | 9,8 | 9 standard
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard
Downloads for older versions
Creative Suite CS5.5 | CS5 | CS4 | CS3
Acrobat X | 9, 8
Photoshop Elements 11, 10 | 9, 8 , 7

How can I activate the option "lens corrections" in the Develop-mode?

Hello
How can I activate the option "lens corrections" in the Develop-mode? I have lightroom 5.5.
In the Develop Mode I have every option exept "lens corrections" - where is it hidden? (see picture - sorry it's in German)
Thanks!

Perfekt!
Vielen Dank!
Christian Gazzarin-Junginger
Rietstrasse 17
CH-9016 St. Gallen
Tel. 071 280 00 38
[email protected]
www.scouwon.ch
Am 07.07.2014 um 12:29 schrieb mangray <[email protected]>:
How can I activate the option "lens corrections" in the Develop-mode?
created by mangray in Photoshop Lightroom - View the full discussion
Gehe mit der rechten Maustaste in irgend ein Feld und ein häckchen bei Objektivkorrektur!
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6527965#6527965
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

To install Photoshop CS6, I have already downloaded the 2 files for Windows. How can I activate the product?

To install Photoshop CS6, I have already downloaded the 2 files for Windows. How can I activate the product?

I am having the same problem. I did download the two files and started the .exe file. The .exe file appears to run downloading files. When the bar is full the window dissapears without any options. Both files are in the same folder. any thoughts?

The WI-FI icon is not active (I had to restaure my ipod after a drop in water...) How can I activate the WI-FI logo again?

The WI-FI icon is not active (I had to restaure my ipod after a drop in water...) How can I activate the WI-FI logo again?

You can try here. However, I suspect a hardware problem. It usually is.
iOS: Wi-Fi or Bluetooth settings grayed out or dim

I phone purchased online did not boot and it is said to have been locked through i cloud and i an unable to contact the seller how can i activate the phone

I phone purchased online did not boot and it is said to have been locked through i cloud and i an unable to contact the seller how can i activate the phone

Unfortunately, your best bet is to obtain original proof of purchase and escalate your issue for assistance in detaching the Apple ID from that device. If your unable to get the proof of purchase, expensive paperweight . Did you get it through amazon?? Because I just got one through amazon....
<Edited by Host>

How can i activate the table YGRBW_CS_UNITS

hi frnds
how can i activate the table YGRBW_CS_UNITS and its fields

hi friend,
if you mean the table structure
SE11 type in YGRBW_CS_UNITS
click activate
hope this helps.

How can I activate the spell corrector as I write in Microsoft word?

How can I activate the spell corrector as I write in Microsoft word?

Everything you need is in the Spelling and Grammar preference pane, within Word's Preferences.
Check the boxes, "Check spelling as you type", & "Always suggest corrections".
As well, there is a button for checking the document, called "Check Document", which you can use on an existing document that has not been checked yet.
See this shot:

How can I activate the Billing Timer icons in MacFreeLance 3.13? They are "grayed out" and unresponsive. MacXware Support Suite has not provided a solution.

How can I activate the Billing Timer icons (Go, Pause, Stop)
in MacFreeLance 3.13? They are "grayed out" and unresponsive. MacXware Support Suite has not provided a solution.

Lack of support from that company seems to be a non-uncommon problem. But it's not a problem you will be likely to get help with in the Communities, and definitely not here in the "Using Apple Support Communities" forum which is for questions about the Communities themselves. If MacWare can't or won't help you, you may be stuck, though there was an email address posted in this thread:
http://www.facebook.com/Macware/posts/327848817260562?comment_id=4108331
that may get you a response.
Regards.

How can I change the counter symbols for the slideshow templates in Muse?

How can I change the counter symbols for the slideshow templates in Muse? Currently they are obviously normal text characters. So, how can I change them to filled circles, for example?

Hi Aish,
Thank you very much. This was very helpful. I am still new to Muse and try to find my way through all the features and possibilities. I like it very much so far.
Does Muse support ‘liquid” design as well?
Thank you !
Best regards,
Fred

How can I evaluate the count of a query I'd like to execute with a map...

Hi. I have a problem with a query...
I hava created a query which a execute with a Map (I use the
executeWithMap(Map) method). The problem is that sometimes this query
returns a large resultset. So, I would like to execute an other query
(called query_count) before executing ther final query with the Map. If
the query_count returns a count < 200, I execute the final query. How can
I do ? There is an example I have read this in the documentation :
Query query = pm.newQuery (Magazine.class, "price < 5");
query.setResult ("count(this)");
Long count = (Long) query.execute ();
The problem in this example is that the query is not execute with a Map.
So my question is : "How can we do the evalute the count of a query we
would like to execute with a map ?". Thank you for any response.

Hi John,
You should be able to executeWithMap that query, too. Is that giving you
problems?
Note that there may be an easier solution. What do you do if there are more
than 200 results? If, e.g., you just get the first N, then one option is to
set the FetchBatchSize on the query to N (thus activating large result set
support), and then call size () on the resulting Collection. This will
issue a SELECT COUNT(*) to the database to determine the size automatically.
Thanks,
Greg
"John" <[email protected]> wrote in message
news:ctq9a8$4gr$[email protected]..
>
Hi. I have a problem with a query...
I hava created a query which a execute with a Map (I use the
executeWithMap(Map) method). The problem is that sometimes this query
returns a large resultset. So, I would like to execute an other query
(called query_count) before executing ther final query with the Map. If
the query_count returns a count < 200, I execute the final query. How can
I do ? There is an example I have read this in the documentation :
Query query = pm.newQuery (Magazine.class, "price < 5");
query.setResult ("count(this)");
Long count = (Long) query.execute ();
The problem in this example is that the query is not execute with a Map.
So my question is : "How can we do the evalute the count of a query we
would like to execute with a map ?". Thank you for any response.

How can I activate the camera on my iPad?

How can I activate my camera on my iPad

Russ_02 wrote:
How can I activate my camera on my iPad
(1) Camera is already activated.
To use it, launch an app that operates the camera and tap the virtual shutter button.
(2) For more specific help, see the iPad User Guide for iOS 7.1 Software.
(If your internet connection is slow, it may take a minute for this link to open.)
Some apps that come with your iOS 7.1 and their User Guide references are:
Camera: Chapter 12, starting on page 68
Photo Booth: Chapter 19, starting on page 86
If you live in a country that does not block it, FaceTime: Chapter 9, starting on p. 58.
View photos you have already made in Camera Roll: Chapter 11, starting on page 63.
(3) If you want to explore other camera possibilities, you can search the iTunes Apps Store for other apps that can use your camera.
Message was edited by: EZ Jim
Mac OSX 10.9

How can i activate the auto tag complete

Hi,
where can i activate the function that automatically suggesting tags?
for example after i type in <div alg .... it show me the alternative options for this tag...
it was standard activated but i don't find where i have deactivate this function
Thanks

Hi Ken,
thanks for the answer. But i don't look for auto close.
in looking for he option "automatically suggesting tags"..
bevor it was like this: i insert <div style="f then it shom me the
alternative tags for al options with f...
or when i typ in & it show me all possibilities for &....
like here:

¿HOW CAN I ACTIVATE THE COUNTER OF BYTES IN MY BLACKBERRY?

Similar Messages

Maybe you are looking for