How can I add a bitlocker data recovery agent?

Hi,
I'm using an SCCM 2012 task sequence to encrypt laptop disks using bitlocker.
If I want to add a data recovery agent, can I just configure a GPO with the specific DRA settings as shown here:
http://sourcedaddy.com/windows-7/how-to-configure-data-recovery-agent.html ?
Or is there another method I should be using for SCCM 2012?
Thanks

Yes, I know this is an old post, but I’m trying to clean them up.
Did you solve this problem, if so what was the solution?
Have you looked at MBAM?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

How can I add the expiration date at line item level

My User is selling voucher. The voucher is sell at line item. eg GV$5, GV$10,etc
Each voucher line item sold need to be entered with a EXPIRATION date of that voucher.
Maybe 3 months from issue, maybe 6months/1 year from issue.
How can I add this to the sales order line item level?
Which field can I used and how to configure?

Hi Colin ,
The question is not very clear , but i assume that you are asking about the self expiry date of the particular material ,
1. The setting you can do by activating shelf life data in material master :Plant data/stor1
2. its better to have a batch managed material for that you can sort the material acording the self expiry date.
3. Once you maintain self expiry date system by default pick the material at the time of delivery
Note-Shelf life expiry it will give the life of the material from the day of manfacture,remaining shelf life also will give .
Hope it is helpful
Best regards
Venkat

How can I add an expiration date to a pdf file?

How can I apply an expiration date to a pdf document in Acrobat Pro X? Can this be done in Acrobat XI?

Read this:
http://forums.adobe.com/thread/1085319?tstart=0

Using Bitlocker Data Recovery Agent (DRA) on Surface Pro 3

We currently have the Data Recovery Agent (DRA) configured in our Bitlocker Policy for our Windows 7 Systems, and it works fine. In situations where the Recovery Key for the computer object was not backed up to AD correctly for whatever reason or the computer
object was deleted, our HelpDesk can connect the encrypted drive to another system, and then use the certificate for the DRA to unlock the drive.
I'm wondering if the BitLocker DRA Certificate unlock method will work for Surface Pro 3 devices, in the case that that their computer object and normal BitLocker recovery key is deleted or missing in AD for whatever reason. Seeing as how our helpdesk can't
easily remove the internal HD from a Surface Pro 3 (I think only MS can do this?), I'm wondering if this BitLocker recovery option is still an option for Surface Pro 3's and if it is not then if there is another recommended option for Surface Pro 3's and/or
other Windows 8.1 Tablets used in an enterprise environment.

noctlos wrote:
Using linux-3.18 and -3.19 kernels, with wayland/weston v. 1.7. In its own tty, i try to run weston, and I get the following stderr:
Could anyone help me to figure this out? Thanks.
Seems that the problem lies in libinput. Maybe you can report that upstream. I suggest you recompile libinput with debug info and do not strip the binaries to obtain better backtraces.
Edit:
I have also tried running `swc-launch -- velox`, and get the following error:
Running on /dev/tty2
velox: error while loading shared libraries: libinput.so.5: cannot open shared object file: No such file or directory
Server exited with status 127
Restoring VT to original state
So, perhaps I am having some libinput trouble. Does this seem correct?
Well, that's a different problem. libinput has several soname bumps because of API and ABI incompatibility. You have to rebuild swc against the newest libinput. (Although I'm not sure if swc developer updated the code to new API)
Edit 2:
Just to tack this on here for `gnome-session --session=gnome-wayland --debug`
I'm not expert on this, it may be related to libinput problem. If you don't include GDK_BACKEND=wayland environment variable when launching gnome-wayland.
Last edited by jdbrown (2015-03-01 08:04:39)

How can we add source field data in to receiver JMS header

I have a scenario called IDOC(ECC System) or PROXY(SRM System) to JMS(Only one Queue).
ECC(Idoc) and SRM(Proxy) -
XI -
JMS
In the Idoc and proxy we have a field called Source System. If it is a Idoc then this source system field coming with SAP ECC if the data is coming from SRM System then the source system field is SAP SRM. My problem is how I can map these fields to the JMS header? Then according to the JMS header TIBCO will send this data to target systems. If data is coming from ECC then it will send it to one Third party system and if data is coming from SRM then it will send it to other Third party target system.

Hi Purushotham,
You can add it in receiver determination.
Our IDOC segement EDIDC_40 contains feild called SNDPRN and SNDPRT.
By using this in condition for configured receivers you can route this to your desired receiver system.
May be you can mantain two queues for your two receivers.
Regards,
Akshay.
reward points if useful.

How can i add two table data into third internal table see below

hi i insert diffferent table data into different internal table i did try to insert two different internal table data into third internal table by using move
but only single data is coming please help me
i want this two internal table data inot third internal table.
sELECT * FROM J_1IEXCHDR INTO CORRESPONDING FIELDS OF ITAB1 WHERE STATUS = 'P'.
SELECT * FROM J_1IEXCDTL INTO CORRESPONDING FIELDS OF ITAB2 WHERE LIFNR = J_1IEXCHDR-LIFNR.
                         AND DOCYR = J_1IEXCHDR-DOCYR,
                         AND DOCNO = J_1IEXCHDR-DOCNO.
WRITE: / ITAB1-LIFNR,
          ITAB1-DOCNO,
          ITAB1-EXYEAR,
          ITAB1-BUDAT,
          ITAB2-EXBED,
          ITAB2-RDOC,
          ITAB2-ECS.
ENDSELECT.
ENDSELECT.
thank you .

hi
Two add two internal tables data. first we need to create third internal table with all the fields of first two internal tables.
later u move the two internal tables data to third internal table
by looping the internal table which have more records or depending on the requirement and move the corresponding fields of first internal table to the third internal table and use the read statement with condition based on primary key of first itab and get the corresponding data of 2table into 3table.
i am sending the sample code to u.
check it out. i think u will understand how to move.
select vbeln waerk netwr erdat audat kunnr
   into table it_vbeln
   from vbak
   where vbeln in s_vbeln
     and erdat in s_erdat.
if not it_vbeln[] is initial.
select kunnr name1
   into table it_kunnr
   from kna1
   for all entries in it_vbeln
     where kunnr = it_vbeln-kunnr.
endif.
loop at it_vbeln.
clear it_final.
   it_final-vbeln = it_vbeln-vbeln.
   it_final-waerk = it_vbeln-waerk.
   it_final-netwr = it_vbeln-netwr.
   it_final-erdat = it_vbeln-erdat.
   it_final-audat = it_vbeln-audat.
read table it_kunnr with key kunnr = it_vbeln-kunnr.
   it_final-name1 = it_kunnr-name1.
append it_final.
endloop.

How can I add a graduation date for Secondary School/Sixth Form to get student Creative Cloud?

Hello,
I am just wondering how to answer the Graduation date section of the Creative Cloud student discount of the full amount of software. I am a Sixth Form student studying A-Levels and would find it useful to have the Adobe Creative Suite programs on my PC but without the large cost. However I am stuck answering the question, "Graduation Date" as I dont know what it would refer to for a Sixth form. Help is much appreciated.

These are the links I have... if none of them have the information, you will need to contact Adobe directly
Start here https://creative.adobe.com/join/edu
One Year Intro Price http://forums.adobe.com/thread/1448933?tstart=0
http://www.adobe.com/products/creativecloud/students.edu.html
http://www.adobe.com/products/creativecloud/buying-guide-education.html
http://www.adobe.com/education/students/student-eligibility-guide.edu.html
ID Proof http://www.adobe.com/store/au_edu/academic_id.html
Adobe contact information - http://helpx.adobe.com/contact.html

How can I add time-sensitive data (EST) to my site?

I've created a website for a radio station and they'd like the user to see what's on the broadcast now, and what's coming up next on the broadcast. To see a good example, go to BottRadioNetwork.com.
Paige Powell

You can't do that with just Muse.
You would need some sort of database to pull that info from. There is a good chance the streaming Audio Host has a plugin that you can insert the code into your Muse page.

I got the new iPhone 5C. In my cellular settings, under "Use cellular data for", it only show passbook and facetime. How can I add other apps? Also, my carrier is AT&T

I got the new iPhone 5C. In my cellular settings, under "Use cellular data for", it only show passbook and facetime. How can I add other apps? Also, my carrier is AT&T

Hello Sophie59
You should be able to see two different tabs when setting up the email if you go to Other > Add Mail Account. Once you enter in the email address and password, you should be at the next screen to provide more details about the email as far as incoming and outgoing servers and at the top there will be a blue section to add it in as a POP or IMAP email account. Check out the article below for further troubleshooting and emails setup options.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
iOS: Adding an email account
http://support.apple.com/kb/ht4810
Regards,
-Norm G.

How can I add date to photos taken on my iphone 4s

How can I add a date to photos taken on my iphone 4s?

That's correct - Photos supports geotagging, but only allows viewing of that information. Once an image is in Photos, geotags cannot be added, deleted, or edited. This post suggests some apps for editing geotags outside of the Photos app. As you mentioned, you can edit the geotags in iPhoto, export to the finder and then import to Photos. I would guess (and hope!) we'll see this added in an update, and hopefully soon!

How can i add one month to a date variable ?

Unlike the week which always 7 days, month may change from 28 to
31, so how can i add one month to a date variable ? Thanks in
advance.

Adding 365 won't always work because of leap years.
You could use the following SQL statement:
SELECT
     TO_DATE(
          TO_CHAR(TO_DATE(SYSDATE), 'DD-MON-') ||
            (TO_CHAR(TO_DATE(SYSDATE), 'YYYY') + 1)) NEXT_YEAR
FROM
     dual
NEXT_YEAR
08-JAN-03Or you could create your own function. You would use this
exactly like add_months:
CREATE OR REPLACE FUNCTION add_years
     (v_date DATE, num_years NUMBER)
RETURN DATE AS
     v_year DATE;
BEGIN
     v_year := TO_DATE(
               TO_CHAR(TO_DATE(SYSDATE), 'DD-MON-') ||
                     (TO_CHAR(TO_DATE(SYSDATE), 'YYYY')
                                         + num_years));
     RETURN v_year;
END;
SELECT
     add_years(SYSDATE, 1) new_year
FROM
     dual
NEW_YEAR
08-JAN-03
SELECT
     add_years(SYSDATE, -1) new_year
FROM
     dual
NEW_YEAR
08-JAN-01

How can i add formula to waveform data type?

I want to interpolate my acquired data in terms of voltage to temperature. For this i need to use polynomial equation, but i am not able to directly attach formula node to the waveform data type. I want to know how can i add formula node to waveform data, and then also have it real time.

One additional thought that may be helpful. Once you get the Y component of the waveform graph you are going to attempt to wire this into a formula node. You can do one of two things with that array. Put a for loop around the formula node and index the array into and out of the for loop. This allows you to do scalar math on the data. It is also possible to index and array in a formula node. The following KnoledgeBase demonstrates how to do this: http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/9d72b6069346942386256a0d00604ed4?OpenDocument

How can i add the dimensions and data loading into planning apllications?

Now please let me know how can i add the dimensions and data loading into planning apllication without manuallly?

you can use tools like ODI or DIM or HAL to load metadata & data into planning applications.
The data load can be done at the Essbase end using rules file. But metadata changes should flow from planning to essbase through any of above mentioned tools and also there are many other way to achieve the same.
- Krish

How can I add the date at the top of the screen along with the day and time display?

Hello,
How can I add the date at the top of the screen along with the day and time display?
Thanks so much!

Open System Preferences>Date & Time:
Ciao.

How can I add the date to my locked screen on iPhone 5, i0S7

How can I add the date to my locked screen on iPhone 5, i0S7

The date is not showing up on the locked screen since I updated to the latest software. Trust me, I looked for it before posting

How can I add a bitlocker data recovery agent?

Similar Messages

Maybe you are looking for