How can i add a transition to video when using pinned audio without loosing sync

Everytime i try to add a transition to my video after adding audio from an external source the audio becomes unsync,( it doesn't matter if i pinn the audio or not) any solutions or worked around?
I'm using Imovie 11.

Try this...
Click EDIT/TRANSITION OVERLAP/HALF. This will maintain project duration.
Normal transitions take half the frames they need from each adjacent clip.
If you choose HALF, it will take the frames needed for the transitions from the unused portion of your event clips. For this to work correctly, you will need to have unused frames available in each clip. If your project clip uses the frames all the way to the beginning or end of the event clip, there would be no frames to borrow. You also need to make sure that there is no embarassing footage in the unused frames that will be now used in the transitions.  If you carefully edited out Aunt Judy picking her nose, these frames of Aunt Judy may show up in the transition, if they are adjacent to a project clip with a transition.
There are good diagrams explaining this in iMovie/Help.

Similar Messages

  • How can I add new songs and videos...?

    How can I add new songs and videos to my ipod without syncing as it wants to wipe out the ipod and replace all the existing media?

    On the ipod itself?  If so how?
    I've tried checking on box by the sync music to deselect "Entire music library", but get the  message about "Are sure.... All existing content on the iPod will be removed and replaced...".  However, I don't want to do that as there is music on my ipod I don't want to loose, got it from a previous computer that crashed and could not be recovered.

  • How can I add photos to a video without interrupting the sound of the original video?

    In PE11, How can I add photos to a video without interrupting the sound of the original video?

    RLHeflin
    Thanks for getting your details posted. Good job.
    You further explained
    I am simply wanting to “overlay” a new visual element without disturbing the underlying audio.
    A classical way to do a Premiere Elements Overlay is to hold down the Ctrl key of the computer main keyboard and drag the new clip over the area of the one you want to replace on the Timeline. That should not do anything but replace one portion of the video on the Timeline. No change in duration video or audio track if you are dealing with video linked to audio.
    If you hold down the Alt key of the computer main keyboard, I am envising a scenario where you want to add to (not replace) some Timeline content.
    A just in case note, if you have video on Video 1 and 2 and the video in 2 does not have transparent areas in it, then all you will see is the Video 2 content. I believe that Hunt eluded to that concept as a possible technique for what you might be doing.
    Another just in case, if you have not seen the following Adobe documentation on arranging clips, you might be interested in the following link
    http://help.adobe.com/en_US/premiereelements/using/WS9B8F8208-EAE8-4b49-A79B-9479B46A8981. html
    Please update us on your progress when you get a chance.
    Thank you.
    ATR

  • I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
    In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

  • How can I add the progress loading box when I load a module?

    Hi everyone, how can I add the progress loading box when I
    load a
    module? Is it an automated thing with flex or must I code it?
    Thanks.
    :)

    try using javascript onclick attribute:
    onclick="document.form.name.disabled=false"
    m

  • How can i add smiley or special character when creating new contacts?

    how can i add smileys or special character when creating a contact on my contacts? help please...

    I think you need to download an app for that - do a search in the app store.

  • How can i hook my old ipod to my new lap top without loosing my music

    how can I hook up my iPod touch to my new laptop without loosing my music files

    Syncing to a new iTunes library or computer will erase your iPod. Only if you back up your device manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
    Do this:
    Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your iPod for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the device for the first time.
    Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
    About backups and what's saved: iTunes: About iOS backups
    How to back up and restore:http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    Saving other data is also described here. How to back up your data and set up as a new device

  • How can I delete all photographs in stream of my iPhone 4 without loosing them on my mac?

    How can I delete all photographs in stream of my iPhone 4 without loosing them on my mac? Because I have too much photographs
    in my phone's memory and I need to know a simple methode to get them off.

    Login to iCloud.com, hit the "Reset Photo Stream" button. This will delete all photos stored in iCloud, but not any photos pushed to any devices. Then, on your phone, Settings>iCloud>Photo Stream>Off. This will delete all photos in your Photo Stream album, on your phone. This will leave them on your Mac as long as you don't turn Photo Stream off on your Mac. If you first import them to your iPhoto library, you can then turn Photo Stream off on your Mac & they will remain in your iPhoto library.

  • Hi All  I want to rent a film from iTunes. The language is given as french which i don't speak! How can i see if the film has an english language audio without renting it first? Thanks for help

    Hi All
    I want to rent a film from iTunes. The language is given as french which i don't speak! How can i see if the film has an english language audio without renting it first?
    Thanks for help

    The language(s) that a film is available in should be listed on its description page in the store e.g. (this is from a Mac's iTunes, I don't have Apple TV so I'm not sure if you see the same description pages) :
    If a film doesn't have any alternate languages or subtitles then you will just see the 'primary' language mentioned.
    If it is available in other languages, then to select it when playing it : iTunes: Language settings for video

  • How can I add time to my video?

    I have an animation that I rendered out of 3DS MAX. It took 32 hours to output. The animation has movement, then freezes, then moves again. ect, ect... Currently the time where it is "frozen" is about 2 seconds. I need to extend that to 4 seconds.
    How can I take a section of video and stretch the time it takes to play that section.
    Other useful information. The whole animation was rendered as an image sequence. If all else fails, I could chop up the video, inset single images where I need more time and stretch the length of that image and continue the video on the other end of that image. I need to do this about 10 times...so the easiest way for me will be the best way.
    Thanks,
    Dean

    Do you need to maintain an image sequence? Usually the answer to that is no.
    Convert to a movie format and just use timeremapping to give yourself some stretches. You just set hold keyframes in the time parameter.
    This can also be accomplished by precomposing the image sequence and applying time keyframes to the precomp.

  • Elements 11 vs 13: how can I add a new place tag to my PSE13 database without using the wretched and totally inadequate map technology  that Elements 13 wants to impose.

    HI,
    I have recently installed Elements 13 having used Elements 11.0 successfully to build a database of 30,000 plus images indexed by place, people, and photo date. Elements 11 allowed me to add new places which are meaningful to me but which are a complete mystery to the mapping technology of Elements 13. For example some years ago I lived in London in a road called Argyle Road. In elements 11 I could enter the place tag as Argyle Road. In Elements 13 I am required to locate Argyle Road on the map, but the map presupposes that the Argyle Road I am referring to is in Ealing in West London. It is not!
      I now live in a place called Broadsands but the Elements 13 Map places this 0.5 miles away from what I would describe as Broadsands.
      So the question: how can I add a new place tag to my database without using the wretched and totally inadequate map technology  that Elements 13 wants to impose.

    Thank you for your quick response, BalusC. I really appreciate your answer.
    Yes, you are right. If I manually code the same amount of those components in the JSF pages instead of generating them dynamically, the server will still run out of memory. That is to say, JSF pages might not accommodate a great deal of concurrent visiting. If I upgrade the server to just allow 1,000 teachers making their own test papers at the same time, but when over 2,000 students take the same questionnaire simultaneously, the server will need another upgrading. So I have to do what you have told me, using JS+DOM instead of upgrading the server endlessly.
    Best Regards, Ailsa

  • How can I disenable the EXCEL field format when use ALV download to excel ?

    Dear friends,
         I have a problem with the ALV download to EXCEL. One field Value in ALV is like u2018-abcdeu2026u2019.the character u201C-u201Cis the first   position  in field value.when I download  the value to EXCEL,the field value u2018-abcdeu2026u2019 changed u2018=-abcdeu2026u2019 in EXCEL.how can I remove u2018=u2019 in EXCEL when I down to excel used ALV.
    I add a space in u2018  -abcdeu2026u2019,So this value can be download to Excel .
    Have you any solve method?
    User does not use excel logo button to download.
    User use Local fileu2026 button to download
    Thanks
    Sun

    add a single quote to the beginning of the field.
    like:  '-abcde
    in excel it will be shown as : -abcde

  • How can I attach a photo to an email,using Photoshop Elements9,without going through the Revel cloud

    How can I attach a photo to an email using Photoshop Elements 9, without going through the Adobe Revel cloud?

    Adobe user wrote:
    I'm using Windows 7.  I have no email clients.
    You don't need an Email client nor Adobe Revel account to send email and photos as attachment.  All you need is an email account (could be free web-based account such as Gmail, Outlook, Yahoo, AOL or whatever including from your own ISP.  And of course an Internet Connection.
    Now the most obvious requirement is out of the way so you need to go in to your Organizer and click on Share button and choose Photomail. Select the photo you want to send and follow the instructions that are on your screen.
    You also need to request an Adobe Verification Code to enable you to use Adobe's Mail Servers to send the photos for you.  To do this go to:
    Edit >> Preferences>> Sharing
    Look for something like this and fill out the red boxes where indicated (click on this image to see it clearly).
    Hope this gets you started.

  • How can I add MPAA ratings to video files in iTunes?

    I understand Apple prohibits the customer from manually inputting MPAA or TV ratings into the video files centrally stored in an iTunes library, as ripping DVDs is considered illegal. How can I get around this problem? Is it possible to manually manipulate the meta data outside of iTunes?
    In this specific case, I would like to share content over a home network also used by children; I have no problem with them watching Harry Potter, but they need to grow a little before they want Dexter or Game of Thrones, but Apple makes this process unnecessarily cumbersome and obtuse.
    I assume Apple will never permit this functionality, if only to satify copyright holders as well as protecting profits. However, I live in the Netherlands, and under Dutch law people are specifically permitted to make a limited number of copies of any copyrighted material (for personalI use only obviously, sharing remains technically illegal). The law places a small duty on all blank storage media, from old cassettes up until anything containing a hard drive (including iPod), to compensate artists and copyright holders for potential lost revenues. The total duty collected and disbursed amounts to tens of millions, and I imagine Apple also benefits (if ever so slightly). Therefore, under Dutch jurisdiction, I should be able to manipulate ripped versions of legally obtained video material all I want, as I wholly own the copies (legally). Do other countries/states have similar laws on the books?
    The price of doing business globally is that you must adapt to many different legal jurisdictions; other companies do it without apparant problems, Apple should as well.

    Schmeck wrote:
    I understand Apple prohibits the customer from manually inputting MPAA or TV ratings into the video files centrally stored in an iTunes library
    You understand incorrectly.
    as ripping DVDs is considered illegal
    What does this have to with ratings?
    I assume Apple will never permit this functionality,
    Don't know why you would assume this at all.
    They don't permit nor prohibit it. They don't do anything about it.
    How can I get around this problem? Is it possible to manually manipulate the meta data outside of iTunes?
    Yes, very easily. You need an application that will allow you to set the ratings. There are plenty of apps around.
    -> MetaZ works fine for tagging most info on movies including ratings.
    Note that Apple is simply a distributor. They are not the labels/copyright owners. Pretty sure they don't get any money from Stichting Thuiskopie.

  • How can I cut a section of video, but leave the audio playing?

    iMovie 6
    Hi, I want to edit, or remove a small section of video, but leave the audio playing in the background. I want to just put up a picture in the same spot. But, I need the video's audio to keep playing. I videotaped someone speaking, but there is a section where there is a mistake, namely, the camera was moved. I need to keep the audio going, and figured I would just put a still image of text or picture in the section where the mistake is, that's why I need the audio to keep playing. It's too long of a section to just do a transition to cover the mistake. Can someone help me with this? I guess you could call what I want to do is cut to a still image while the audio keeps playing?
    Thanks
    Message was edited by: thomjw

    thomjw,
    Have a look at this article:
    http://docs.info.apple.com/article.html?path=iMovie/HD/en/im18.html
    Post back if you still have questions.
    Matt

Maybe you are looking for