How can I add a 'Virtual 7354' device?
We are looking to purchase a PCI-7354 and I noticed that after installing the latest NI-Motion 8.3 that there is no option to add a Virtual 7354 device. The only options I see are: 7344, 7334, 7358 and 7390. Can I safely choose the 7358 and integrate agaisnt that without having the change my code when we finally get the 7354 in?
Thanks
Hi,
As you have noticed you can only simulate certain devices. Your idea of simulating the 7358 should work as the only difference between the two devices is one is 4-axis and the other is 8-axis.
Regards,
Greg H.
Applications Engineer
National Instruments
Similar Messages
-
How to add an virtual disk device
I remember i have seen one doc describe how to add an virtual disk device in solaris system, but I forget it now, can somebody help me?
not sure what you are trying to achieve...
However you should not be referring to Luns via their logical device i.e. c0t0d0, but using the unique did device or the /global device. refer to scdidam -L which will list all the did devices across all nodes and map them to the logical device path. -
how can i add a new device to Itunes
Not sure what your post's title means, but you can only add a device to your iCloud account directly on the device e.g. log into the account in Settings > iCloud
If your iPad isn't showing in your computer's iTunes when you connect it to your computer then is your iTunes up-to-date ? There is also some troubleshooting for a device not showing on these pages :
PC : iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Mac : iOS: Device not recognized in iTunes for OS X - Apple Support -
How can i add a device on find my iPhone?
how can i add a device on find my iPhone?
You activate iCloud and Find my iPhone on the device you want to track using your Apple ID.
-
How can I add amazon to Apple TV?
I am a new Apple TV user. So far I am impressed and like it a lot. However I would like to use the Amazon Prime and I have yet to find it. How can I add it to my Apple TV?
You cannot add apps to Apple TV. If you have an IOS device you can AirPlay to stream using the app from there
-
HT4352 how can I add an additional apple tv to my computer
How can I add an aditional apple tv to my computer and my remote on my phone?
Hello bardlight. Welcome to the Apple Discussions!
Based on your configuration description, the Logitech TV is physically connected properly to the 802.11n AirPort Extreme Base Station (AEBSn). You do want it connected to one of the available LAN ports on the AEBSn.
By default, the AEBSn, is performing as a DHCP server. Also, by default, most computing devices are configured as DHCP clients. What this means is that the AEBSn should be providing the proper IP addresses to any connected (wired or wireless) in order for that device to access both the network and on to the Internet.
It sounds like that Logitech TV is just not configured properly as a DHCP client. -
How can I add a user Role member that is from a different domain
We are currently building out SCOM 2012 R2 to provide monitoring as a service to some of our customers. As of now we have the RMS on our own department's domain (Domain A) which we have full control of and we have a gateway server that is on the company
wide domain (Domain B) so that we can monitor other departments devices as the leverage this system.
Monitoring is working just fine on both domains and we are just working on fine tuning SCOM so that we can roll it out as a service we offer to our customers. One of the next steps we are working on before rolling it out is giving specific users access
to view only their own devices, dashboards, and groups. So I created a Read-Only profile and went to add a user to test it out, but that user is on Domain B and SCOM is unable to resolve this account. I'm seeing Event ID 26319 with Error Code 1332.
How can I get SCOM to discover devices on a different domain so that I can give them different permissions for accessing the Operations Console and/or Web Console? Is this possible?
Here is the Error I'm seeing.
Log Name: Operations Manager
Source: OpsMgr SDK Service
Date: 2/4/2015 1:11:59 PM
Event ID: 26319
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: xxxxx.xxxx.xxxxxxxx.xxx
Description:
An exception was thrown while processing UpsertUserRolesV2 for session ID uuid:f3b4015e-9583-4237-b7a6-406826434553;id=40.
Exception message: The creator of this fault did not specify a Reason.
Full Exception: System.ServiceModel.FaultException`1[Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException:
Unable to resolve the user [email protected] associated with the user role. Error code 1332. Check your active directory configuration.).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="OpsMgr SDK Service" />
<EventID Qualifiers="49152">26319</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-04T21:11:59.000000000Z" />
<EventRecordID>172748</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>xxxxx.xxxx.xxxxxxxx.xxx</Computer>
<Security />
</System>
<EventData>
<Data>UpsertUserRolesV2</Data>
<Data>uuid:f3b4015e-9583-4237-b7a6-406826434553;id=40</Data>
<Data>The creator of this fault did not specify a Reason.</Data>
<Data>System.ServiceModel.FaultException`1[Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException:
Unable to resolve the user [email protected] associated with the user role. Error code 1332. Check your active directory configuration.).</Data>
</EventData>
</Event>
Thanks for any help I can get in resolving this issue.
JakeThe SCOM Management Server is in Domain A. I've tried it already and it has failed.
So just to clarify the method I used was to go to Administration>Security>User Roles. Then New User Role>Read-Only Operator. In the Create User Role Wizard I then gave the User Role a name, Clicked "Add" under User Role Members.
Then the Select Users or Groups window pops up and I changed the Locations from Domain A to Domain B and searched for the user, which it's able to find, then clicked "OK" to add it to the User Role members which it does just fine. On
the next page which is Group Scope I checked the one group I want this account to have access to and then click next. This brings me to Dashboards and Views where I click the radio button for "Only the dashboards and views selected in each tab are
approved" and chose the folder of dashboards I want this account to access and then click next. This brings me to the Summary and I click "Create". At this point it thinks for a moment then closes out the wizard but the new Read-Only
Operator does not appear. I then look in Event Viewer and see the Event I pasted above.
Am I doing something wrong here? Any guidance on how to get around this issue would be much appreciated.
Thanks,
Jake -
How can i add one phone number to my macbook pro application imessage
how can i add one phone number to my macbook pro application imessage
Make sure that the iPad is using the same Apple ID as your iPhone. If the phone number still doesn't appear, log out of iMessage on both devices, log back in on the iPhone, wait until it activates, then log into iMessage on the iPad with the same Apple ID.
-
How can I add an email account in apple mac which ends with .consulting
We changed our email account and the domain name is .consulting. How can I add this account to my Mac mail?
If you are trying to activate an iPad or iPhone and it is asking for a previous Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must use the previous Apple ID and password to unlock the device. If you do not know the password you might be able to recover it at this link:
https://iforgot.apple.com/password/verify/appleid
This normally will require that info is sent to the primary email address associated with the Apple ID. If you have an alternate email address assigned to that Apple ID you might get the password via the alternate email address. -
iCal Lion is infuriating. How can I add a new event in a chosen calendar without having to create it in my default then edit it?
We are all entitled to our own opinions. So I respect you there brother
But then again, Apple has its own basis. iOS is what's selling like pancakes not Macs, so if the gazillions out there are using iOS device and have gotten used to the calendar in their iOS devices. Wouldn't you think it made sense if Lion has the same calendar look and feel?
Everything was considered and weighthed when they developed Lion. They even mentioned it in the press, They were blown away with the success of iOS so they are extending it to OSX.
Quite frankly, I like the old iCal but yeah I don't expect anything in SL to stay in Lion otherwise it'll be another Cat name related to Leopard
People should start looking at this perspective and not get STUCK in the old OS. -
How can I add a new column in compress partition table.
I have a compress partition table when I add a new column in that table it give me an error "ORA-22856: CANNOT ADD COLUMNS TO OBJECT TABLES". I had cretaed a table in this clause. How can I add a new column in compress partition table.
CREATE TABLE Employee
Empno Number,
Tr_Date Date
COMPRESS PARTITION BY RANGE (Tr_Date)
PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
PARTITION JUNK Values LESS THAN (MAXVALUE));
Note :
When I create table with this clause it will allow me to add a column.
CREATE TABLE Employee
Empno Number,
Tr_Date Date
PARTITION BY RANGE (Tr_Date)
PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
PARTITION JUNK Values LESS THAN (MAXVALUE));
But for this I have to drop and recreate the table and I dont want this becaue my table is in online state i cannot take a risk. Please give me best solution.Hi Fahed,
I guess, you are using Oracle 9i Database Release 9.2.0.2 and the Table which you need to alter is in OLTP environment where data is usually inserted using regular inserts. As a result, these tables generally do not get much benefit from using table compression. Table compression works best on read-only tables that are loaded once but read many times. Tables used in data warehousing applications, for example, are great candidates for table compression.
Reference : http://www.oracle.com/technology/oramag/oracle/04-mar/o24tech_data.html
Topic : When to Use Table Compression
Bug
Reference : http://dba.ipbhost.com/lofiversion/index.php/t147.html
BUG:<2421054>
Affects: RDBMS (9-A0)
NB: FIXED
Abstract: ENH: Allow ALTER TABLE to ADD/DROP columns for tables using COMPRESS feature
Details:
This is an enhancement to allow "ALTER TABLE" to ADD/DROP
columns for tables using the COMPRESS feature.
In 9i errors are reported for ADD/DROP but the text may
be misleading:
eg:
ADD column fails with "ORA-22856: cannot add columns to object tables"
DROP column fails with "ORA-12996: cannot drop system-generated virtual column"
Note that a table which was previously marked as compress which has
now been altered to NOCOMPRESS also signals such errors as the
underlying table could still contain COMPRESS format datablocks.
As of 10i ADD/SET UNUSED is allowed provided the ADD has no default value.
Best Regards,
Muhammad Waseem Haroon
[email protected] -
how can i add a new language to iOS?? do i have to create a language pack to do it?? PLEASE help...
yes a new language.. do i have to create a language pack?? or any other way.. i need to make my device display in "sinhala" langauge which is used in my country (Sri Lanka) and not yet available in iOS.. is this possible?? seeking help very badly...
PLEASE help... -
Had 3G, moved to 3GS. Backed up 3G and restored 3GS from backup with no problem on a Dell computer. But now when I want to add songs, I get itunes message of death that the new iphone is synced to another computer and now wants to erase everything. How can I add music without erasing everything on my new iphone?
Yes, I was aware of this but the phrase "Any items imported from audio CDs or acquired from other sources will not copy from your device to the iTunes library." is what worries me. Will this eliminate my Notes, Calendar Events, etc or will it apply mostly just to the music?
-
When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!
Hi,
I would suggest you to uninstall Adobe Reader using the cleaner tool and then re-install the latest version.
Adobe Cleaner Tool:- Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs.
Latest version of Adobe Reader:- http://get.adobe.com/reader/
If you still experience the same issue, please share the following information:-
- Screenshot of Adobe Reader showing printer options
- Screenshot of Microsoft Word showing printer options
- Screenshot of control panel- Control Panel\All Control Panel Items\Devices and Printers
Regards,
Nakul -
How can I add the "Profile Removal Password Payload" to a configuration Profile?
How can I add the “Profile Removal Password Payload” to a configuration Profile?
I’m not seeing an option to add this option when I edit the configuration profile within Apple Configurator.
Do I have to edit the configuration profile(xml file) within a text editor?
FYI:
https://developer.apple.com/library/ios/featuredarticles/iPhoneConfigurationProf ileRef/Introduction/Introduction.html
Profile Removal Password Payload
The Removal Password payload is designated by specifying com.apple.profileRemovalPassword value as the PayloadType value.
A password removal policy payload provides a password to allow users to remove a locked configuration profile from the device. If this payload is present and has a password value set, the device asks for the password when the user taps a profile's Remove button. This payload is encrypted with the rest of the profile.
Key
Type
Value
RemovalPassword
String
Optional. Specifies the removal password for the profile.You have found where it is stored in Thunderbird?
Delete it. When Thunderbird needs it again, it will ask you for it.
Maybe you are looking for
-
how do i increase memory of itunes library on my mac desktop?
-
Open Crystal report from SAP BW
Hi, is it possible to open and refresh (thus passing parameters/values) a certain Crystal report (version 2008 SP3) from a SAP BW system (version 7.10), e.g. with a RFC call? If it's possible, which transaction do I have to call to setup this call? W
-
Cloning WinXP onto Seagate Barracuda 7200.10 SATA hard disk
Greetings everybody! I recently wanted to clone my existing (perfectly working) Windows XP Home boot hard disk onto a brand new 320 GB Seagate Barracuda 7200.10 SATA drive, model ST3320620AS. The existing boot C-disk is a 250 GB Western Digital SATA,
-
How do I set Catalogue to new larger internal hard drive and then delete the files from the smaller
I have just had a new 1TB internal hard drive installed in my PC and then the original smaller internal 500GB hard drive cloned onto it. The new 1TB is now Local Dick C and the smaller 500GB has been changed from C and is now Local Disk F. PSE11 is r
-
Oracle Management Server not starting up. says node manager is down!!!
Hi ALL, We are trying to startup (OMS) Oracle Management Server but it's not starting up. it tries to connect to the node manager and says failed to connect to Node Manager as the node manager is not running. OPMN also not running. I have attached a