How can I add an audio media file to my Pages document

I have created a Pages document on my iPad. I can add photos but not audio (there is only a Photos option) So I emailed the document to my desktop and went onto iCloud via Safari. Now i don't see the Media icon (I am in Pages beta if this is relevant). Any suggestions?

I knew about the comment possibility, but as you have said...users would need instruction. This is intended for a controlled environment where I know that everyone will have a device with a microphone. However, the users of the form would have very little experience as this is meant for patients.

Similar Messages

How can I add an audio file to each slide when I export to HTML Keynote 6.2

How can I add an audio file to each slide when I export to HTML Keynote 6.2
I am trying to create an audio slide show instead of a movie

Drag and drop one music files onto each slide then export. (File > Export > HTML)

How can I add the audio content cd after logic finished installing ?

There was an eror installing the Audio Content CD 1 and I did not notice. Everything else installed properly, Audio Content CD 2, Jam Pack, but how can I add the Audio Content CD1 after Logic has finished installing?
If you can help me please be very specific as to how to do it so that I can follow the directions properly.
Please help me.
Thanks

Hi
You could re-run the installer, or, once you have updated to Logic 9.1.8 you could use the "Download Additional Content" function in the Logic Pro menu. It will tell you what is installed and what is incomplete.
CCT

How can i add my report.rdf file in portal

Hi,
How can i add my report.rdf files in portal .. it's urgent and i have 30 report like to be executed based on user parameters....
can anybody help me please... thanks in advance....
vipin
null

hello,
check the whitepapers on "security walkthrough" at http://otn.oracle.com/products/reports
regards,
the oracle reports team

IF_IXML : How can i add encoding with value UTF-8 to the document object??

Hi
i want to create a xml file with the following content:
<?xml version="1.0" encoding="UTF-8"?>
<OpenSearchDescription xmlns="http://....">
</OpenSearchDescription>
i did this with the if_ixml interface and rendered the content in a file 'D:\usr\sap\IFD\DVEBMGS01\log\TEST_out.xml
<?xml version="1.0"?>
<OpenSearchDescription xmlns="http://....">
</OpenSearchDescription>
BUT the document attribut(?) encoding="UTF-8"?> is missing!
How can i add encoding with value UTF-8 to the document object?? it should look like:
<?xml version="1.0" encoding="UTF-8"?>
*here is my coding.
TYPE-POOLS: ixml.
CLASS cl_ixml DEFINITION LOAD.
DATA: lo_ixml           TYPE REF TO if_ixml,
      lo_streamfactory TYPE REF TO if_ixml_stream_factory,
      lo_document       TYPE REF TO if_ixml_document,
      lo_parent         TYPE REF TO if_ixml_element,
      lo_ostream        TYPE REF TO if_ixml_ostream,
      lo_renderer       TYPE REF TO if_ixml_renderer,
     lv_rc           TYPE i.
lo_ixml = cl_ixml=>create( ).
lo_streamfactory = lo_ixml->create_stream_factory( ).
lo_document = lo_ixml->create_document( ).
lo_parent = lo_document->create_simple_element( name   = 'OpenSearchDescription' "root node
                                                parent = lo_document ).
lo_parent->set_attribute_ns( name   = 'xmlns'
                             value = 'http://....' ).
*rausrendern in file
lo_ostream = lo_streamfactory->create_ostream_uri( system_id = 'D:\usr\sap\IFD\DVEBMGS01\log\TEST_out.xml' ).
lo_renderer = lo_ixml->create_renderer( ostream = lo_ostream
                                        document = lo_document ).
lv_rc = lo_renderer->render( ).
Thanks for help
Britta

Use the following code:
set an document encoding
l_encoding = l_ixml->create_encoding( character_set = 'UTF-8'
                                        byte_order = if_ixml_encoding=>co_none ).
l_success = l_ostream->set_encoding( encoding = l_encoding ).
create a xml renderer
l_renderer = l_ixml->create_renderer( document = l_doc ostream = l_ostream ).

How can I print mulitple different .ai files onto one page in Illustrator CS6?

How can I print mulitple different .ai files onto one page in Illustrator CS6? I have all of the files organized by Arrange Documents>Tile All in Grid and I would like to print the files in this format so that they can all be seen at once when printed out onto one page.
Some background is that I have 16 different cad drawings that I have converted and edited in illustrator. I'd like to basically make a contact sheet with all 16 drawings so that they can be reviewed on one sheet of paper after printing. But each drawing is in it's own unique file, and I have not figured out how to put them all onto one page for printing.

You can place them (linked) into a new Illustrator file and print from there.
The original files will need pdf compatability.

How can I add lyrics to media (mp3, wma, etc.) files?

Is there any possibility to add lyrics in media files (mp3, wma, etc.) in Windows 7? I didn't get it

For various reasons, that feature was intentionally removed from WMP12 for Win7.
Please, please note that tags can still be edited from within Windows Explorer; however, the 'lyrics' feature was removed there.
See zachd's responses in this thread:
WMP 12 - Where is the Advanced Tag Editor?
There, you'll see the reasons that ATE was removed from Media Player, as well as why 'lyrics' went away.
HTH,
Chris[If this post helps to resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster.]

Exchange 2007 and EWS Managed API: How can I add in-memory text file as an attachment to an email message?

Hello,
In my ASP.NET application, I need to add a text file attachment to an EmailMessage. I am building the attachment text content in a StringBuilder and I like to avoid saving it to disk and use Attachments.AddFileAttachment.
How can I add a text file attachment to EmailMesage based on in-memory string variable?
Thank you,

I found the answer.
This is the API:
http://msdn.microsoft.com/en-us/library/office/dd634274(v=exchg.80).aspx

How can i add new identity in file option of menu bar

''locking as a duplicate - https://support.mozilla.com/en-US/questions/869755''
how can i add new identity option in file option of menu bar

There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

How can I add/retrieve Word/Excell files to iCloud?

I have an iCloud Account that I haven't used in the past. How can I add/delete/retrieve files such as Word & Excel files?

To save arbitrary document types in iCloud on MacOS X 10.9.5 have a look at Winston Churchill's User Tip:
See this link: Using iCloud to sync multiple document types.
This will work between Macs, but not for mobile devices.

How can I add an audio file to a .mov video?

Im trying to add an audio file (format 'aiff'), to a video in the format of .mov
I can't find anything that will just let me combine the two files to make one .mov video file.
Any suggestions?
Cheers!

Drag and drop one music files onto each slide then export. (File > Export > HTML)

How can you add optional audio to a converted ppt deck?

Our group is working on a project based on a powerpoint deck synchronized with audio .wav files (and converted to an .swf file). The deck is an interactive training module with a voiceover. We want to maintain the association of particular slides in the sequence with particular wav files, but we want it silent by default. How can we make it so that the voiceover audio is silent by default, but have a "play now" button embedded in the deck?
Any advice would be welcome!
Christina Leshko
Rutgers University

There are a couple of ways you could do this:
Add a button labelled 'Play Now' to the very beginning of your slide and set the button's pause point so that it pauses your slide before the audio begins to play. The button action would be to simply Continue. So when the user reaches this slide, they can inspect the graphics or text on the slide for as long as they like and then click the Play Now button to listen to the audio for that slide.
Do not have your audio connected to the slide but to the Success caption of a Play Now button. The button pauses the slide but the audio will only play when the user clicks the button and the Success caption would have appeared. If you do not want the Success caption to be visible, make it a transparent caption with no text. It will be present on stage while the audio is playing but not visible to the user.

How can i add update signed jar file

I am developing an applet which requires signing to run in a browser.
I am developing supporting classes. But these class files have to be added
to the jar. Isnt it??
But to test the applet i need to load it in the browser each time i modify the class files. So the jar file need to be updated every time. But an
IOError
is being displayed when i try to update the signed jar file.
How can i update signed jar file?? Or is there any othe way to test the signed applet during development??

How can i update signed jar file?You can't, the signature is there to make sure the content of the jare hasn't been messed
with.
Either recreate the jar and re sign it or set up a policy during testing.

How can I add a log in and password protected page on my website

I would like to add a "register now" and login page to my website. Can anyone help with a SIMPLE solution? I've tried to follow the 'secure area' info on BC but not having any success.
I would like to have a 'register/login' button in order for visitors to get to a secure page. How can I make it happen on Muse?
THANK YOU!!

Hi
You may want to refer to discussion here : Adding a Secure Zone to my Muse site
As mentioned, you need to create a secure zone in your Business catalyst site and have a landing page set there only. This cannot be managed from Muse only.
For more details on how to create secure zones and achieve this, you may want to refer to some useful article as mentioned below:
Business Catalyst Help | Add a secure area to your site
http://www.bcgurus.com/tutorials/using-bc-secure-zones-with-adobe-muse
I hope this helps.

How can I add a custom attribute to the create page dialog?

I followed the following link to add a custom attribute called starred and this attaribute can be displayed in siteadmin grid
http://dev.day.com/docs/en/cq/current/developing/customize_siteadmin.html
I would like to let the user input the value when they create a page. That's why I would like to add a custom field in the input dialog box as attached pic.
The method you describe before can only added those CQ bulid-in attribute.
For those custom attribute, how can I added it?

Hi,
How can I customize the /bin/wcmcommand or how can I make use of [2] to create a custom WCMCommand?
I think the "formUrl" is to post those input value to the jcr repository?
var createDialog = {
        "jcr:primaryType": "cq:Dialog",
        "id": CQ.Util.createId("cq-createdialog"),
        "title":CQ.I18n.getMessage("Create Page"),
        "formUrl": CQ.shared.HTTP.externalize("/bin/wcmcommand"),
        "params": {
            "cmd":"createPage",
            "_charset_":"utf-8"
I have added a field called "starred"
Moreover, when I using the firebug to trace the post command, I can see that the starred value is posted also.
:status
browser
_charset_
utf-8
cmd
createPage
label
b
parentPath
/content/keyword_elaboration
starred
c
template
/libs/collab/commons/templates/form
title
a
Source
cmd=createPage&_charset_=utf-8&%3Astatus=browser&parentPath=%2Fcontent%2Fkeyword_elaboration&title=a&label=b&starred=c&template=%2Flibs%2Fcollab%2Fcommons%2Ftemplates%2Fform
However, when I go to the crxde to view the node's attribute, the properity starred is not created
Are there anything I did wrong or missing?
Thanks.
Message was edited by: aslkit

How can I add an audio media file to my Pages document

Similar Messages

Maybe you are looking for