How can I add firefox to my note2 phone need for classes
how can I add firfox to my note 2 phone
Don't use sync. It will just screw everything up. I just had to restore by desktop FF bookmarks for the up-teenth-time because FF Android screwed them up again. Firefox makes all kinds of excuses as to why but I have had it.
I removed FB Android from all my devices. I imported the bookmarks to Chrome and will use that on my Android devices from now on. Chrome bookmark sync is WAY better.
I will still use FF on my desktop, because I still think its better than Chrome, but not on my Android devices.
PS: I have a Note 2, 2 other Android devices and a laptop. FF sync does not WORK!
Similar Messages
-
How can we add a control on our .jsp webpage for uploading several image fi
How can we add a control on our .jsp webpage for uploading several image files as done in gmail attachment, Where a Remove button also appears if we wanna remove the particular attachment.
The SCOM Management Server is in Domain A. I've tried it already and it has failed.
So just to clarify the method I used was to go to Administration>Security>User Roles. Then New User Role>Read-Only Operator. In the Create User Role Wizard I then gave the User Role a name, Clicked "Add" under User Role Members.
Then the Select Users or Groups window pops up and I changed the Locations from Domain A to Domain B and searched for the user, which it's able to find, then clicked "OK" to add it to the User Role members which it does just fine. On
the next page which is Group Scope I checked the one group I want this account to have access to and then click next. This brings me to Dashboards and Views where I click the radio button for "Only the dashboards and views selected in each tab are
approved" and chose the folder of dashboards I want this account to access and then click next. This brings me to the Summary and I click "Create". At this point it thinks for a moment then closes out the wizard but the new Read-Only
Operator does not appear. I then look in Event Viewer and see the Event I pasted above.
Am I doing something wrong here? Any guidance on how to get around this issue would be much appreciated.
Thanks,
Jake -
How can I add new languages on my phone?
I have an Nokia N80 and i don`t have the French language...How can I add this language on my phone?
Solved!
Go to Solution.You can't do it yourself, you have to take the phone to a Nokia Care Point.
Note that the absence of a language in the phone is not a fault in the phone if it was originally intended to be sold in an area where French is not spoken, so there may be a charge for installing this language pack.
Also note that language packs installed independently of the firmware do not survive a reset or a firmware update. Therefore, if you do reset your phone or update its firmware, you will loose the language pack and have to have it reinstalled.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you! -
There is no + button close to the contact button. How can i add contacts to mu i-phone 4S?
Hi Friend,
Check if you turned Restrictions on before, in Settings>>General>>Restrictions.
Hope it helps -
My husband and I share an iTunes account. We both just got iPads. How can we program them to have different phone numbers for FaceTime and messages
Use different email address (gmail?) just for FaceTime and Messages.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
Cheers, Tom -
How can i no which SATA driver do I need for Satellite L300-03C
How can i no which SATA driver do I need for Satellite L300-03C so i can do nlite
Hi
Your notebook seems to be a Satellite L300-03C PSLB8C-03C01X.
As already suggested in your first thread visit the Toshiba Canada page and choose this notebook model on the driver page.
http://209.167.114.38/support/Download/ln_bymodel.asp
Then download the Intel Matrix Storage Manager (SATA) - Floppy drive image. Its for Vista but the files in this package should work with Win XP too.
Include these files using nLite in order to create new Win XP disk containing the SATA drivers.
Finally use this disk for booting. -
How can i add a new function to the Basic IVI class vi's?
I need to use the IVI vi's to control some instruments, let's say a DC Power Supply.
Since there's a DC Power supplyclass, i can used those VI's but waht if one of the VI's does not contains all the functions that i need?. How can i add more functions to the IVI classes?. What do i need to do to add a new function to the iviFGen class?If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would suggest contacting one of the Alliance members at:
http://www.ni.com/alliance -
How can I add a contact during a phone call
some times during a phone call the one im taking with give me phone number and i dont have a paper to write down this number to save later, my question is how can I add a phone number during a phone conversation?
please note that im using iphones with latest update iOS 7.1.2While on a call you can use the "add call" or "Contacts" buttons to get to the Contacts app. You can then add a new contact or add or edit numbers in existing contacts. (If the keypad is showing, press "hide" to see the other buttons.) Press the green bar at the top of the screen to return to the phone screen. If you are not using the headset, you can switch to speakerphone first, so you can talk while doing this.
If you want to use another app while on the phone, press the home button, then choose the app. It won't disconnect the call. If you have a CDMA carrier (Sprint, Verizon) you won't be able to use cellular data while on a call. -
I do not wish to start typing my user id for a website and it automatically coming up as a choice since it has been remembered from a previous attempt. How can I delete firefox from remembering it so I just always type it myself?
The [[Form autocomplete]] article has information on deleting saved entries and preventing the browser from remembering form entries in the future.
-
How can you add an extension to a phone number
How is it possible to add an extension to a phone number in contacts, so that when you call the number its extension direct dials?
To begin, determine which contact you want to add the phone extension to
Then, in either your phone app or Contacts app, tap that contact
Tap the "Edit" button at the top right of the contact
Tap the phone number you want to add the extension to
Tap the "+*#" button at the bottom left of the screen
When the new options come up on the screen, you'll see a "pause" button at the bottom center. Tap that
That will add a comma to the phone number. After the comma has been added to the phone number, type in the person's phone extension -
How can I add a category in the budget template for pages on the iPad?
I can add a category in the budget tab and it will automatically be added to the pie chart summary and the bar graph actual vs. budget portion, but I can't seem to add an option in the categories column on the transactions tab. Anyone know how I can do that?
There is no way.
http://www.apple.com/feedback/macosx.html is the place for feature requests and feedback -
How can I add a Text Template Binding to an UML Class within a MenuCommand Execute Method?
Hey,
I am using Visual Studio 2013 Ultimate with Visual Studio SDK and the Modeling SDK.
I am trying to develop an Visual Studio Extension (VSIX) which contains new MenuCommands.
So if I execute a MenuCommand I want to add a new TemplateBinding for a specific class
something like that:
IClass aspectClass = rootPackage.CreateClass();
aspectClass.TemplateBindings.ToList().Add(new TemplateBinding());
aspectClass.CreateTemplateBinding();
aspectClass.CreateTemplateParameter();
I have already created a new text template file (.tt) and I also want to pass values to this text template file when the
menu command will be executed if this is possible?
So the goal is
1. To execute a custom menu command to add a custom text template file to a specific UML Class
2. To execute the "generate code" menu command to get a generated CSharp file which is conform to my custom text template file
I know this is possible via the GUI, but is this also possible via code?
Thank you very much for your support
Regards,
Michael
Liebe Gr+ße Michael Web EntwicklerHi,
According to your post, my understanding is that add a link to an item within a workflow email.
I’ m not very clear about the status you said. Please descript more detail which URL do you want to display.
Per my knowedge, you can display the following url in your email body:
[%Workflow Context: Current Item URL%]
[%Workflow Context: Current Site URL%]
[%Workflow Context: Workflow Status URL%]
[%Current Item: Encoded Absolute URL%]
Please start the workflow automatically when an item is changed and changed.
No matter how you edit the item or update the approve status, the URLs remains the same.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
How can I add a new field in selection screen for this report
*& Report ZGS_BARKODLA_HIZLI_GIRIS
report zgs_barkodla_hizli_giris.
tables: mara,
mseg,
mch1,
*mch1,
mkpf,
mchb ,
makt.
type-pools: esp1.
data: i_message_tab type esp1_message_tab_type,
wa_message_tab type esp1_message_wa_type ,
sc_count type i.
ALV
type-pools: slis, kkblo.
data: gs_layout type slis_layout_alv ,
gt_fldcat type slis_t_fieldcat_alv with header line,
gt_header type slis_t_listheader with header line,
gt_sortin type slis_t_sortinfo_alv with header line,
g_repid like sy-repid .
define add-fieldcat.
gt_fldcat-fieldname = &1.
gt_fldcat-ref_tabname = &2.
gt_fldcat-seltext_s = &3.
gt_fldcat-seltext_m = &3.
gt_fldcat-seltext_l = &3.
gt_fldcat-reptext_ddic = &3.
gt_fldcat-ddictxt = 'M'.
append gt_fldcat.
clear gt_fldcat.
end-of-definition.
types: begin of titab,
sel type xfeld,
matnr type matnr,
maktx type maktx,
charg type charg_d,
menge type menge_d,
erfmg type erfmg,
end of titab.
data : witab type titab.
data : itab type table of titab.
data : ok_code type sy-ucomm.
controls: tc_itab type tableview using screen 0100.
data: gv_header like bapi2017_gm_head_01,
gv_code like bapi2017_gm_code.
BAPI export parameters
data: gv_headret type bapi2017_gm_head_ret,
gv_matdoc type bapi2017_gm_head_ret-mat_doc,
gv_matyear type bapi2017_gm_head_ret-doc_year.
data : lv_objek like inob-objek .
data : ls_inob like inob .
data : imseg type ty_t_mseg.
data : wmseg type mseg.
data : answer.
data : count type i.
data : v_atinn type atinn.
BAPI movement details
data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
with header line.
data: i_return type bapiret2 occurs 0 with header line.
start-of-selection.
call function 'CONVERSION_EXIT_ATINN_INPUT'
exporting
input = 'Z_ORAN'
importing
output = v_atinn.
call screen 100.
*& Module status_0100 OUTPUT
module status_0100 output.
set pf-status '100'.
set titlebar '100'.
mseg-werks = 1000.
mseg-umwrk = 1000.
**added
sc_count = sc_count + 1.
if sc_count eq 1.
mseg-bwart = 313.
endif.
mkpf-budat = sy-datum.
**added
describe table itab lines tc_itab-lines.
endmodule. " status_0100 OUTPUT
*& Module user_command_0100 INPUT
module user_command_0100 input.
data field(20).
data: line_t like sy-index.
data: lines like sy-index.
data line_count like sy-loopc.
data: begin of cols,
screen like screen,
index type i,
selected(1) type c,
vislength like icon-oleng,
invisible(1) type c,
end of cols.
case ok_code.
when 'DELE'.
delete itab where sel eq 'X'.
when 'ENTE'.
check *mch1-charg is not initial.
read table itab into witab with key charg = *mch1-charg.
if not sy-subrc is initial.
witab-charg = *mch1-charg.
select single matnr from mch1 into witab-matnr
where charg eq witab-charg.
if not syst-subrc is initial.
set cursor field '*MCH1-CHARG'.
message e115(12) with *mch1-charg.
endif.
select single maktx from makt into witab-maktx
where matnr eq witab-matnr
and spras eq syst-langu.
witab-erfmg = 1.
concatenate witab-matnr witab-charg into lv_objek .
clear ls_inob .
select single * into ls_inob
from inob
where objek = lv_objek and
klart = '023' and
obtab = 'MCH1' .
select single atflv from ausp into witab-menge
where objek = ls_inob-cuobj and
klart = '023' .
append witab to itab.
**added
clear *mch1-charg.
**added
endif.
when 'SAVE'.
if mkpf-budat is initial.
set cursor field 'MKPF-BUDAT'.
message e055(00).
endif.
if mseg-lgort is initial.
set cursor field 'MSEG-LGORT'.
message e055(00).
endif.
if mseg-umlgo is initial.
set cursor field 'MSEG-UMLGO'.
message e055(00).
endif.
if mseg-bwart is initial.
set cursor field 'MSEG-BWART'.
message e055(00).
endif.
refresh imseg.
loop at itab into witab.
move-corresponding witab to wmseg.
append wmseg to imseg.
endloop.
call function 'ZMM_POPUP_WITH_DATA'
exporting
imseg = imseg
importing
answer = answer.
if answer eq 'Y'.
perform create_goods_movement.
endif.
when 'P--'.
clear ok_code.
perform paging using 'P--'.
set cursor field 'MARA-MATNR' line 1.
when 'P-'.
clear ok_code.
perform paging using 'P-'.
set cursor field 'MARA-MATNR' line 1.
when 'P+'.
clear ok_code.
clear lines.
perform paging using 'P+'.
set cursor field 'MARA-MATNR' line 1.
when 'P++'.
clear ok_code.
perform paging using 'P++'.
set cursor field 'MARA-MATNR' line 1.
when 'SORA'.
read table tc_itab-cols into cols with key selected = 'X'.
if sy-subrc is initial.
field = cols-screen.
field = field+5(10).
sort itab ascending by (field).
endif.
when 'SORZ'.
read table tc_itab-cols into cols with key selected = 'X'.
if sy-subrc is initial.
field = cols-screen.
field = field+5(10).
sort itab descending by (field).
endif.
when 'PRNT'.
perform write_alv.
endcase.
endmodule. " user_command_0100 INPUT
*& Module read_table OUTPUT
module read_table output.
mara-matnr = witab-matnr.
makt-maktx = witab-maktx.
mch1-charg = witab-charg.
mseg-menge = witab-menge.
mseg-erfmg = witab-erfmg.
line_count = sy-loopc.
endmodule. " read_table OUTPUT
*& Module write_table INPUT
module write_table input.
witab-matnr = mara-matnr.
witab-maktx = makt-maktx.
witab-charg = mch1-charg.
witab-menge = mseg-menge.
witab-erfmg = mseg-erfmg.
modify itab from witab index tc_itab-current_line.
endmodule. " write_table INPUT
*& Module exit INPUT
module exit input.
leave to screen 0 .
endmodule. " exit INPUT
*& Form create_goods_movement
form create_goods_movement .
clear : gv_header, i_return[], i_goodsmvt_items[].
gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
gv_header-pr_uname = sy-uname.
GM with reference to reservation
loop at itab into witab.
i_goodsmvt_items-material = witab-matnr.
i_goodsmvt_items-entry_qnt = witab-erfmg.
i_goodsmvt_items-entry_uom = 'ST'.
i_goodsmvt_items-move_type = mseg-bwart.
i_goodsmvt_items-plant = mseg-werks.
i_goodsmvt_items-stge_loc = mseg-lgort.
i_goodsmvt_items-move_plant = mseg-umwrk.
i_goodsmvt_items-move_stloc = mseg-umlgo.
i_goodsmvt_items-batch = witab-charg.
append i_goodsmvt_items.
endloop.
find BAPI processing transaction
if gv_code is initial.
perform determine_bapi_code using mseg-bwart
changing gv_code.
endif.
call function 'BAPI_GOODSMVT_CREATE'
exporting
goodsmvt_header = gv_header
goodsmvt_code = gv_code
importing
goodsmvt_headret = gv_headret
materialdocument = gv_matdoc
matdocumentyear = gv_matyear
tables
goodsmvt_item = i_goodsmvt_items
return = i_return[].
cancel blocking process
loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
exit.
endloop.
if sy-subrc ne 0.
refresh i_message_tab.
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'.
wa_message_tab-msgid = 'M7'..
wa_message_tab-msgty = 'S'.
wa_message_tab-msgno = '060'.
wa_message_tab-msgv1 = gv_matdoc.
wa_message_tab-msgv2 = ''.
wa_message_tab-msgv3 = ''.
wa_message_tab-msgv4 = ''.
append wa_message_tab to i_message_tab.
else.
refresh i_message_tab.
call function 'BAPI_TRANSACTION_ROLLBACK'.
write a message as there is an unexpected error.
loop at i_return.
wa_message_tab-msgid = i_return-id.
wa_message_tab-msgty = i_return-type.
wa_message_tab-msgno = i_return-number.
wa_message_tab-msgv1 = i_return-message_v1.
wa_message_tab-msgv2 = i_return-message_v2.
wa_message_tab-msgv3 = i_return-message_v3.
wa_message_tab-msgv4 = i_return-message_v4.
append wa_message_tab to i_message_tab.
endloop.
endif.
call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
tables
i_message_tab = i_message_tab.
endform. " create_goods_movement
*& Form determine_bapi_code
form determine_bapi_code using p_bwart type bwart
changing p_code type bapi2017_gm_code.
data: lt_t158b type table of t158b with header line.
clear p_code.
select tcode from t158b into corresponding fields of table lt_t158b
where bwart eq p_bwart.
loop at lt_t158b.
select single gmcode from t158g into p_code
where tcode eq lt_t158b-tcode.
if sy-subrc is initial.
exit.
endif.
endloop.
endform. " determine_bapi_code
*& Form paging
form paging using code.
data: i type i,
j type i.
case code.
when 'P--'. tc_itab-top_line = 1.
when 'P-'.
tc_itab-top_line = tc_itab-top_line - line_count.
if tc_itab-top_line le 0.
tc_itab-top_line = 1.
endif.
when 'P+'.
i = tc_itab-top_line + line_count.
j = tc_itab-lines - line_count + 1.
if j le 0.
j = 1.
endif.
if i le j.
tc_itab-top_line = i.
else.
tc_itab-top_line = j.
endif.
when 'P++'.
tc_itab-top_line = tc_itab-lines - line_count + 1.
if tc_itab-top_line le 0.
tc_itab-top_line = 1.
endif.
endcase.
endform. " paging
*& Form write_alv
form write_alv .
perform find_list_header.
perform fill_field_cat.
perform fill_sortinfo.
g_repid = sy-repid.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra = 'X'.
answer = 'Y'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_buffer_active = ''
i_callback_program = g_repid
i_save = 'A'
i_callback_top_of_page = 'TOP_OF_PAGE'
is_layout = gs_layout
it_fieldcat = gt_fldcat[]
it_sort = gt_sortin[]
tables
t_outtab = itab[].
endform. " write_alv
Form find_list_header
form find_list_header.
data : v_datum(10),
v_datlo(10),
v_dathi(10),
v_uzeit(8).
clear: gt_header, gt_header[].
gt_header-typ = 'H'.
gt_header-info = sy-title.
append gt_header.
clear gt_header.
gt_header-typ = 'S'.
gt_header-key = 'Çalıştırma Zamanı : '.
write syst-datum to v_datum.
write syst-uzeit to v_uzeit.
concatenate v_datum '/' v_uzeit into gt_header-info.
append gt_header.
endform. " find_list_header
Form fill_field_cat
form fill_field_cat.
refresh gt_fldcat.
clear gt_fldcat.
gt_fldcat-key = 'X'.
add-fieldcat 'MATNR' 'MARA' ''.
add-fieldcat 'MAKTX' 'MAKT' ''.
add-fieldcat 'CHARG' 'MSEG' ''.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'MEINS' 'MARA' 'Olcu Birimi '.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'ERFMG' 'MSEG' 'Adet'.
endform. " fill_field_cat
Form fill_sortinfo
form fill_sortinfo.
gt_sortin-up = 'X'.
gt_sortin-fieldname = 'MATNR'. append gt_sortin.
endform. " fill_sortinfo
Form top_of_page *
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
i_logo = 'ZKUTAS'
it_list_commentary = gt_header[].
endform. " top_of_pageHI,
if it is a normal report program then you can directly create a Selection screen field.
After the Type-pool you can use Parameters or Select-options to create the selection screen field..
If it is a Modulpool program then you can create a selection scren field like
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
PARAMETERS: p1(10) TYPE c.
SELECTION-SCREEN END OF SCREEN 1100.
defines a selection screens 1100 as subscreens.
The next screen number of screen 100 is 100 (statically-defined).
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CALL SUBSCREEN area.
MODULE user_command_0100.
look at the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Regards
Sudheer -
How can I add or change the Network I'D for the TouchPad?
Most devices on a network have names for the device for one reason or another. This helps to distinguish between connected devices and the legitimacy thereof.
So far I have been unable to add a Network ID to this TouchPad.
With the Amazon Kindle Fire had seen the network ID as "My Phone" which I really wanted to change, and fast. Did manage to change it with an Android app called Fing, which allowed me to use a rather unorthodox network identification name.
Would like to find another network utility that can do the same for the HP TouchPad. Any ideas as to a utility, or a more manual method? Fing via the Kindle Fire shows no network ID for my TouchPad.
Post relates to: HP TouchPad (WiFi)
This question was solved.
View Solution.Hello Xelkos,
What you're talking about is actually a feature of DHCP. When asking for an IP address, a client can send a hostname to the server so that it can be easily identified in a human-readable way.
By default, this is disabled on the TouchPad. To enable it, you're going to need to edit a text file on the device. There's lots of different ways to do this, so pick your favorite and then follow these insturctions.
Find /etc/dhclient.conf and open it
Find the line that starts with:
# send-hostname
Delete the "#" sign in front of the line and change the text inside the quotes. This text should be whatever you want your hostname to be:
send-hostname "TouchPad"
Once you've done that, save and close the file
Next, turn Wi-Fi off and then back on. You should now see your hostname show up on your Access Point / Router.
NOTE: Remember that in order to make these changes permanent, you must set the file system as read-write:
mount -o remount,rw /
You must also set it back to read-only when you're done:
mount -o remount,ro / -
How can i add a new event in my calendar for the new IOS 5?
I cant seem to add a new event on my iPhone 4 with the new iOS 5. I read the you are suppose to tap and hold the day you want to add an event, but that doesnt seem to work for me.
It works for me when I tap and hold my finger over the day seeing the month or week, when the phone is turned sideways. Maybe you should keep the finger a little longer on the screen to hold.
Maybe you are looking for
-
IPhone 4S Outlook 2010 shared Calendar problem
Hello all, There problem to see in Outlook 2010 shared calendar in iPhone 4S. In iPhone 4S there is seen owner calendar of added Exchange Server account, but I need to see other one person shared calendar which is impossible to see. I see in iPhone 4
-
Can u tell me where I get a good material on ABAP-HR?
Hi Everybody, I am a fresher.I got my project on ABAP-HR.I don't know anything about it.plz tell me where can i get good material on ABAP-HR. thanks®ards saydulu.kolasani
-
What is the best way(fastest way) to loads sound files
Hi, I am using adobe edge version 3 to create a website....I have added sounds to the website usings adobe edge itself.I use many sound(256 files,total size 6 mb)....When someone visits the website it takes a long time to load.How can i prevent this
-
I have schedule DTS to import every day few tables. It had been working great and had no problem. All of a sudden I started getting this error. ERROR AT DESTINATION FOR ROW NUMBER 100. ERROR ENCOUNTERED SO FAR IN THE TASK. 1 UNIDENTIFIED ERROR. (SQL
-
Does the W540 have msata?
I have a crucial 256GB msata in my W520, in addition to a 512 SSD main drive and DVD. Will the msata drive work in the V540, in addition to the main HD(s). I cant find a specification of the 540 on the lenovo website (a problem with dell also, why