How can I add KANNADA(India) as display language on my iphone4?

how can I add KANNADA(India) as display language on my iphone4? your feedback will be highly appreciated.
Thank you

The languages available for displaying the OS are published in the tech specs, and you cannot add new ones:
http://www.apple.com/iphone-5s/specs/
The iphone does include a Kannada unicode font, so you should be able to see email and websites, such as
http://kn.wikipedia.org/wiki/ಮುಖ್ಯ_ಪುಟ
But there is no Kannada keyboard yet. Search the app store for "kannada" to see if there is a keyboard app which might be useful for some purposes.

Similar Messages

How can I add more options of alternate languages to the "Spec Name" translations?

The options should appear on a GSM specification when I click on the little globe besides Spec Name, ShortName, Description, and other fields. But I cannot find where to configure that list of languages so that I can add the ones I need for proactive translations.

You can definitely add more languages.
1. Check out the configuration guide: Multi-Language Support for Proactive Translations section.   It will tell you how to activate them in the database.
2. Once activated, you will need to assign them to the users that can add translations. You do this in UGM on the user profile.
3. Once languages have been added to the user, the user will see the language options in the proactive language popup.
Hope this helps. Let me know if you have any further questions.
Kelly
Just as a reference, in addition to our National Language Support packs we support the following languages for proactive translations:
Spanish
Portuguese
Italian
German
Dutch
Polish
SpanishMexico
SpanishCostaRica
SpanishVenezuela
Japanese
Indonesian
Thai
Russian
Finish
FrenchBelgium
DutchBelgium
Danish
Swedish
Norwegian
Czech
Slovak
GermanGermany
GermanSwitzerland
GermanAustria
Catalan

How can I add a second display to my Mac Mini

How can I add a second display to my Mac Mini (mid 2011). HDTV and standard monitor working simultaneously.

True ... but that can be tricky.
Macs can only power so much, and only through approved/proper adapters.
Running two monitors off a single MDP-to-VGA adapter may not work, because Mac may not nicely exchange-talk the simultaneous signals.
There is an adapter that will convert a single minidisplayport to two VGA plugs, but that adapter is $100 instead of $30 (for the single) because it has special hardware in the adapter itself to manage the two signals sinultaneously.
Alternately ...
Running one through the minidisplayport and one through the HDMI port makes them two separate signals to be processed.

Arabic is not listed as a display language in iTunes for Windows 7. How can I add support for this language?

Arabic is not listed as a display language in iTunes for Windows 7. How can I add support for this language?

Edit ---> referance -----> general ------> language

How can I add the date at the top of the screen along with the day and time display?

Hello,
How can I add the date at the top of the screen along with the day and time display?
Thanks so much!

Open System Preferences>Date & Time:
Ciao.

How can I update the 'Top Sites' display on Safari on my MacBook Pro?

Ok, so, up until fairly recently (around 2 weeks) when I opened Safari my topsites would be displayed as nine 'thumbnails'. And they used to show the current site, so if I had CNN, it would show the top stories of the day, yet now it has stopped and hasn't updated for weeks, so is showing old news, until I click it. Also, for NBA.com, it shows an old picture, until I click and open the site. I know this is a very trivial thing, yet it's annoying. So basically, how can I add a new tab and see the Top Sites' thumbnails updated? Thanks in advance.

Hi.
now it has stopped and hasn't updated for weeks,
The TopSites.plist file may be corrupted. There's an easy fix.
Quit Safari.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Safari
Click Go
Move the TopSites.plist file from the Safari folder to the Trash.
Relaunch Safari. See if that made a difference.
How to manage Safari's Top Sites | Macworld

How can i add a new link to Portal favorites?

Hi,
I have created a portal application and configured it to a porta frame work page byy adding iViews and portal pages.
I would like to display an iView as a link in the portal favorites. I have added it to portal favorites as related link. But nothing is displayed in the portal favorites when i logged in as application user.
How can i add a link to the created iView just like the "DeveloperContent" link shown in portal favorites when we login as portal administrator?
Your help and suggestions solicited...
Best regards,
Sudheesh

Hi Sudheesh,
The Related Links option is for Content Administrators to add links that they think will be useful for a certain page or iView...an end user can't add their own links to the Related Links iView. Also, you don't need Knowledge Management installed in the Portal for the Related Links iView to work. Also, Related Links will be available only on the pages/iViews that the Content Administrator has created them.
Read more about Related Links here:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/1d37600aa111d7b84700047582c9f7/frameset.htm
Portal Favorites is a nice option for end users to decide which iViews or pages they would like to be available from every Portal page.
To open new iViews/pages in a new window, rather than in the current Content Area, adjust the Workprotect mode of the portal (either the user can do it for their preference or the Administrator can do it for everyone):
http://help.sap.com/saphelp_nw04/helpdata/en/15/4b673e214ad112e10000000a11405a/frameset.htm

How can I add a new message(custom text message) to the holiday approval em

How can I add a new message(custom text message) to the holiday approval email-notification sent to the manager?
TIA

The answer is 'not very easily', unless the information you want to display is the employee's leave balances. In 12.1.3 Oracle have delivered functionality that allows you to include the leave balances in the approval notifications out-the-box, ie, without customization.
For any other information you're probably going to have to customize the standard delivered HRSSA workflow. Within this workflow, the Leave of Absence functionality uses the Notify Approver (Embedded) (HR_APPROVER_NTF) notification. The body of this notification is set to the Notify Approver (Embedded) (HR_NTF_EMBEDDED_REGION) attribute. This in turn defaults to:
JSP:/OA_HTML/OA.jsp?OAFunc=-&HR_EMBEDDED_REGION-&NtfId=-&#NID-
So essentially you can change the HR_APPROVER_NTF notification. The problem with changing this notification is that it's generic - it's used for all SSHR functions and not just Leave of Absence. That means you have to make other, more substantial, customizations to the workflow to ensure the changes you make only applies to LOA.
The other option is to personalize the review page (ie, the region referenced in &HR_EMBEDDED_REGION) to include whatever messages you want. But that means they'll appear on the Review page and all LOA approval notifications and that might not be what you want.
It's usually better to live with what Oracle deliver and find an alternative solution! What's the content of the message you want to include?

How can i add a new language to iOS?? do i have to create a language pack to do it??

how can i add a new language to iOS?? do i have to create a language pack to do it?? PLEASE help...

yes a new language.. do i have to create a language pack?? or any other way.. i need to make my device display in "sinhala" langauge which is used in my country (Sri Lanka) and not yet available in iOS.. is this possible?? seeking help very badly...
PLEASE help...

How can you add a where clause using "OR" with applied ViewCriteria?

[JDeveloper 10.1.3 SU4]
[JHeadstart 10.1.3 build 78]
I am using JHeadstart, but have a question probably more in the ADF area. On the JHeadstart forum I asked:
"I am overriding JhsApplicationModule's advancedSearch in order to be able to search in childtables. I created transient attributes, display those in advanced search and in the overridden method I check if any of these are filled by the user and create a where clause like 'EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>)'. I add this whereclause using ViewObject.setWhereClause.
So far so good and it works. However, if the user selects 'Result matches any criteria', combining setWhereClause and the normal advancedSearch QueryByExample implementation using ViewCriteriaRow do not provide the desired result, since the ViewCriteria and the setWhereClause are AND-ed together, which is fine if the user selects the (default) "Results match all criteria" (everything is AND-ed) but not the "Result matches any criteria", since then every criterium is OR-ed together, except for the setwhereclause criteria and the set of ViewCriteriaRows, they are AND-ed.
I looked if I could specify that a WhereClause will be OR-ed to existing applied ViewCriteria, but no luck. Do I have to rewrite also advancedSearch's ViewCriteria implementation and write an entire setWhereClause implementation to be able to "OR" every criterium? Or any other suggestions? Can I look at the entire Where clause and rewrite it (after applyCriteria and setWhereClause are called on the VO)?
Toine"
Sandra Muller (JHeadstart Team) told me today: "This sounds like a JDeveloper/ADF issue that is not related to JHeadstart. The question is: how can you add a where clause using "OR" if there are already one or more ViewCriteria applied?
To simplify the test case, you could create a simple ADF BC test client class in a test Model project without JHeadstart (in the test class, use bc4jclient + Ctrl-Enter), in which you first apply a few ViewCriteriaRows to a View Object and also add a where clause.
Can you please log a TAR at MetaLink ( http://metalink.oracle.com/ ), or ask this question at the JDeveloper forum at http://otn.oracle.com/discussionforums/jdev.html ? (This what I am doing now ;-))
Thanks,
Sandra Muller
JHeadstart Team
Oracle Consulting"
Anyone knowing the answer or am I asking for an enhancement?
Toine

Hi,
Can you SET your whereclause as follows ?
('Y' = <isAnd>
and EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>))
OR ('N' = <isAnd>
AND EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> OR <another column in childtable> LIKE '<value supplied by user>))
)

How can i add rows to a JTable at run time ??????

hi there
how can i add a row to a JTable at run time? and display the table after the change? thank you.

For adding or removing the rows from the JTable, you have to use the methods on the table model. I would show you a simple implementation of table model.
public class MyTableModel extends AbstractTableModel {
private ArrayList rowsList = null;
private String [] columns = { "Column 1" , "Column 2", "Column 3"};
public MyTableModel() {
rowsList = new ArrayList();
public int getRowCount() {
return rowsList.size();
public int getColumnCount() {
return columns.length;
public void addRow(MyRow myRow) {
//MyRow is any of your object.
rowsList.add(myRow);
fireTableDataChanged();
public void removeRow(int rowIndex) {
rowsList.remove(rowIndex);
fireTableRowsDeleted(rowIndex, rowIndex);
public Object getValueAt(int row, in col) {
MyRow currentRow = (MyRow)rowsList.get(row);
switch (col) {
case 0:
//return the value of first cell
break;
case 1 :
//return the value of second cell
break;
case 2 :
//return the value of third cell
break;
}Then create the table using the TableModel using the constructor new JTable(TableModel) and then when you want to add/remove a row from the table, call myTableModel.addRow(MyRow) or myTableModel.removeRow(rowIndex)....I hope that this solves your problem.

How can I add the hard drive icon to the menu bar on a MBPr

How can I add the hard drive icon to the menu bar on a MBPr? I have downloaded Google Earth and it wants me to drag it to the hard drive for install. I was able to display the icon but now I would like to put it on the menu bar. Is this possible? Or can I add it to the hardware section under system preferences?
I'm a new Apple user, coming out of the dark ages of a lifetime in the PC Windows world.
Thanks

It's on your Desktop, is it not? You cannot put it on the menubar through OS X although you may find third-party utilities that will. If you want it on the Desktop:
Select Preferences from the Finder's Finder menu and check the desired boxes:
Click on the Sidebar icon in the toolbar to set what you want displayed in the Sidebar.

How can you add an image in Mail without being an attachment?

How can you add an image in Mail without being an attachment?
In otherwords I'd like to put my logo in the email not as an attachment but as an image.
Is there a simpel solution to this problem?

PBN1 wrote:
How can you add an image in Mail without being an attachment?
You don't.
It's not possible. The e-mail protocol is designed for text; anything else has to go as an attachment.
Different mail clients (such as Mail.app, the mail client bundled with Mac OS X) may have different ways of handling such attachments, but they are still attachments. Each mail client has its own rules and methods, so one may display a picture as if it were in the body of the message, but another client may do something completely different.
A way of faking it is to format your message in HTML (which is a kind of text). The image is hosted on a remote server, not added to the message; instead, you include a link to it in the body of the message, as you would when building a web page. (This is also what the two tips helpfully provided by X423424X do, except that the link to the image is added in the signature, rather than the body of the message.) What exactly happens to it is, again, at the discretion of the mail client. In my case, for instance, displaying images in HTML messages is turned off, and will stay resolutely off.

How can I add 'AlternateSpace' and 'AlternateColorValue' to my IDML in InDesign?

how can I add 'AlternateSpace' and 'AlternateColorValue' to my IDML in InDesign?
I have a document and colors (CMYK) but need also RGB values to display on the web.
In IDML in Resources/Graphic.xml in each Color are attributes 'AlternateSpace' and 'AlternateColorValue'.
How can I set this in InDesign?

I cannot follow you exactly…
Do you mean you are using the IDML in a further process for Web Design? Translating the IDML to HTML or something?
And now, you need the alternate information for doing the RGB representation of some or all the colors?
InDesign itself does not provide an interface to that.
Nor does scripting.
However, you could change the values in an IDML or IDMS file by editing the file(s):
AlternateSpace="NoAlternateColor" to: AlternateSpace="RGB"
AlternateColorValue"" to: AlternateColorValue"0 144 54" (a green one)
Here a tabular overview of the properties of a color exported with a colored rectangle as IDMS file:
<
    Color Self="Color/GREEN1-Process"
    Model="Process"
    Space="CMYK"
    ColorValue="100 0 100 0"
    ColorOverride="Normal"
    AlternateSpace="NoAlternateColor"
    AlternateColorValue=""
    Name="GREEN1-Process"
    ColorEditable="true"
    ColorRemovable="true"
    Visible="true"
    SwatchCreatorID="7937"
/>
If you'll import the edited IDMS file in a new document and export again as IDML or IDMS, the changed values will persist.
Don't know, if that goes in the right direction for you. I'm guessing here a lot…
Uwe
Message was edited by: Laubender

How can I add location to a photo that does not have a gps location? On iPhoto it was easy.

how can I add location to a photo that does not have a gps location? On iPhoto it was easy.

You can use the Settings in the slideshow to Show Captions, either the Description filed be display, the Title field or both.
If you create the slideshow in iDVD from still photos from iPhoto you can add the Description and/or Title via the settings in iDVD.
Since iDVD adds both automatically the user must go thru the slideshow and remove those items not wanted.

How can I add KANNADA(India) as display language on my iphone4?

Similar Messages

Maybe you are looking for