How can i add memory to my mid 2007 IMAC

how can i add memory to my IMAC

You can have up to 6GB of memory for that model.
Many people on these forums speak well of the following memory suppliers.
In North America contact OWC …        Upgrade Apple iMac Memory
In Europe contact Crucial.com …       RAM Memory Upgrade
Both companies have facilities to guide you and will recommend the correct memory package to meet whatever needs you describe to them.
There may be benefits buying from whichever company has a branch in your own geographical location insofar as Shipping charges, Local sales taxes and Exchange rates. Check out the basic memory costs and do your sums.
Guide to required RAM.    Lookup Mac Specs By Serial Number, Order, Model & EMC Number, Model ID @ EveryMac.com

Similar Messages

How can I add my HP Scanjet 4800to my iMac

How can I add my HP Scanjet 4800 to my iMac

Hi carolyves,
If you are having issues adding a printer on your Mac, you may find the following article helpful:
Mac Basics: Printing in OS X
http://support.apple.com/kb/ht4670
Regards,
- Brenden

Can i install 800MHz memory on my mid 2007 imac?

I'd like to upgrade the memory on my imac: 24 inc mid 2007 (iMac7,1).
It currenlty have a 1GB stick and a 2GB stick. Both 667MHz DDR2 SDRAM. Can I install 2x2GB DDR2 of 800MHz? and if so, would that be an performance improvement?
Specs:
24in iMac7,1
Intel Core 2 Duo 2.4GHz
Bus Peed 800 MHz
Memory: 3GB (as above both 667MHz)
Thanks

You are welcome. That is the same machine as mine (20" version). Although Apple rates it as accepting 4gB, outside vendors have tested it with 6gB. This happens quite often with quoted RAM quantities.
Maximum Memory 6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots 2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM

How can I add a text( In CRM 2007 called Note) to the current entity?

Dear Friends,
I want to add text type 'SU99' with text 'Hello World' to a CRM transaction, how to do this by BOL? Is there any example component for this issue?
Thanks and best regards,
Anders

Hello Anders,
here a piece of code where we add a text from type S002 to the Servicerequest:
lr_bt = lr_bt_adminh->get_related_entity( iv_relation_name = 'BTHeaderTextSet' ).
      lr_bt = lr_bt->create_related_entity( iv_relation_name = 'BTTextHAll' ).
      lr_bt->set_property( iv_attr_name = 'TDID'
                                iv_value = 'S002').
      lv_conc_lines = 'called Tel.'(003).
      CONCATENATE lv_conc_lines lv_phone_no into lv_text.
      lr_bt->set_property_as_string( iv_attr_name = 'CONC_LINES' iv_value = lv_text ).
      lr_core->modify( ).
I hope this helps.
Kind regards
Manfred

How can i play xbox on my mid 2011 imac

is there a video input for thunderbolt so i can play xbox on my imac

You can't. Thunderbolt IS a video input but Xbox doesn't export thunderbolt compliant video. Target display mode is intended to be used with another Mac http://support.apple.com/kb/ht3924

HT1848 How can I add photos to the iPad while not deleting any currently on it? I have some photos from my brother's camera that I can't get again. How could save them onto my iMac?

I have uploaded photos from my brother's camera while on vacation to my iPad (1). Now that I wish to add even more photos to the iPad, iTunes say that it will replace all the photos once I sync again to add from an album on the iMac.
WHOA.
I'd like to upload the photos to the iMac! HOw can I do that?
How can I add photos from albums on the iMac and not lose the ones I currently have stored onthe iPad.
I cannot find this task addressed in any Help reference.
I do not understand why I cannot make a simple file transfer back and forth.
Many thanks!

Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

How can I add more memory to my iPad?

How can I add more memory to my iPad?

Memory refers to RAM, and can't be increased.
I asume you mean storege space (like 16GB, 32GB, etc). It also can't be increased.
There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
 Cheers, Tom

How can I add more memory to my iPod touch

How can I add more memory to my iPod touch?

You are not able to add memory to a iPod Touch.
The only way to get more memory is to buy one with a larger capacity.

How can I add 2 monitors to a Mid 2007 Mac Mini? Would a usb to dvi adaptor work?

How can I add 2 monitors to a Mid 2007 Mac Mini? Would a usb to dvi adaptor work?

Hi Craig,
I do think that is your best bet/option...
http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/

Exchange 2007 and EWS Managed API: How can I add in-memory text file as an attachment to an email message?

Hello,
In my ASP.NET application, I need to add a text file attachment to an EmailMessage. I am building the attachment text content in a StringBuilder and I like to avoid saving it to disk and use Attachments.AddFileAttachment.
How can I add a text file attachment to EmailMesage based on in-memory string variable?
Thank you,

I found the answer.
This is the API:
http://msdn.microsoft.com/en-us/library/office/dd634274(v=exchg.80).aspx

How do I add memory to a MacBook Pro?

How do I add memory to my MacBook Pro?

You have to open the bottom cover of the MBP to get to the memory slots. There are about 10 very small screws around the perimeter, some of which are longer than others so you have to be very careful not to mix them up when you take the cover off. You will need a very small phillips-head screwdriver (small jewelers size). Once you have removed the screws you may have to gently pry the cover off (there is some sticky stuff inside). You will then see the RAM slots more or less in the middle of the computer.
The booklet that came with your MBP has instructions about how to insert/remove the RAM SODIMMs ... there is a plastic tab on each side of the SODIMMs that you push outward and the RAM will pop up slightly ... you can then gently pull it out. Note there is a slot cut in the pin edge of the SODIMMs ... remember it's orientation so you put the new RAM in the same way. It only goes in one way.
It's wise to use the crucial.com Memory Advisor first so you get the exact kind & amount of RAM that is compatible with your MBP.

How can I add a second display to my Mac Mini

How can I add a second display to my Mac Mini (mid 2011). HDTV and standard monitor working simultaneously.

True ... but that can be tricky.
Macs can only power so much, and only through approved/proper adapters.
Running two monitors off a single MDP-to-VGA adapter may not work, because Mac may not nicely exchange-talk the simultaneous signals.
There is an adapter that will convert a single minidisplayport to two VGA plugs, but that adapter is $100 instead of $30 (for the single) because it has special hardware in the adapter itself to manage the two signals sinultaneously.
Alternately ...
Running one through the minidisplayport and one through the HDMI port makes them two separate signals to be processed.

Can I use faster memory in Mid-2007 iMac?

I currently have factory spec (1 GB) memory in my 20" (Mid-2007) iMac. Specs for memory in this machine say I need pc2-5300, unbuffered, non-parity, 200-pin, 667MHz DDR2 SDRAM. I noticed my hardware has an 800 Mhz bus.
1) Can I use 800 Mhz RAM that is otherwise the same spec?
2) How important is CAS Latency (e.g., the installed memory is spec'd as CL=5, the 800 Mhz RAM all seems to be CL=6)?
Any help is greatly appreciated!

I totally agree with lenn5! Many folks here in the forum have reported all sorts of problems, everything from kernal panics to won't even boot when they installed the 800MHz ram. You will see a great improvement in performance by adding another 1GB or 2GB module in the empty slot, or max it out with a 2x2GB kit.
http://support.apple.com/kb/HT1423?viewlocale=en_US
Message was edited by: den.thed

How can i add control at runtime??

hi,
please help me! how can i add control(textfield, dropdownlist or subform...) at run time???
thanks

this option had no relation about editing items or not , i hadn't notice it was accessible true pop up
when you rigt click is properties disable also ?
may be i 'm wrong i talking about that :
see attachement
CLAD / Labview 2011, Win Xp
Mission d'une semaine- à plusieurs mois laissez moi un MP...
RP et Midi-pyrénées .Km+++ si possibilité de télétravail
Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
Don't forget to valid a good answer / pensez à valider une réponse correcte
Attachments:
example.jpg ‏57 KB

Elements 11 vs 13: how can I add a new place tag to my PSE13 database without using the wretched and totally inadequate map technology that Elements 13 wants to impose.

HI,
I have recently installed Elements 13 having used Elements 11.0 successfully to build a database of 30,000 plus images indexed by place, people, and photo date. Elements 11 allowed me to add new places which are meaningful to me but which are a complete mystery to the mapping technology of Elements 13. For example some years ago I lived in London in a road called Argyle Road. In elements 11 I could enter the place tag as Argyle Road. In Elements 13 I am required to locate Argyle Road on the map, but the map presupposes that the Argyle Road I am referring to is in Ealing in West London. It is not!
I now live in a place called Broadsands but the Elements 13 Map places this 0.5 miles away from what I would describe as Broadsands.
So the question: how can I add a new place tag to my database without using the wretched and totally inadequate map technology that Elements 13 wants to impose.

Thank you for your quick response, BalusC. I really appreciate your answer.
Yes, you are right. If I manually code the same amount of those components in the JSF pages instead of generating them dynamically, the server will still run out of memory. That is to say, JSF pages might not accommodate a great deal of concurrent visiting. If I upgrade the server to just allow 1,000 teachers making their own test papers at the same time, but when over 2,000 students take the same questionnaire simultaneously, the server will need another upgrading. So I have to do what you have told me, using JS+DOM instead of upgrading the server endlessly.
Best Regards, Ailsa

How can i add memory to my mid 2007 IMAC

Similar Messages

Maybe you are looking for