How can I add multiple fill in answers for a single title, or fill in answers with no title

Time
Date
Description
I need to add a table much like the one above to my form. How can I do this.

Your best bet might be to use a Formatted Text for "Turnover" on top of your fields and then use caption on top for label positon.
OR you can have the Formatted text on the same line as your fields too
Hope this helps
Gen

Similar Messages

  • HT201317 how can I add multiple photos to camera roll

    how can I add multiple photos to camera roll

    If you mean from photo stream, open your photo stream album on your phone in the thumbnail view, tap Edit, tap all the photos to select them, tap Share, then tap Save to Camera Roll.

  • How can I add multiple email addresses to Address Book?

    How can I add multiple email addresses to Address Book?
    Can it be done from an .xlsx file?

    I have tried that, but the system reads the emails as one long email and I can't find any way of separating them - it ignores spaces, colons and I have also tried putting them through a word doc... still does not work. It works perfectly easily on a PC system!! ( I have just moved to a mac!)
    any ideas would be good
    thanks

  • How can I attach multiple filled-form PDFs to the same outgoing email on iPhone/iPad?

    How can I attach multiple filled-form PDFs to the same outgoing email on iPhone/ iPad?

    This isn't supported in the current version of Adobe Reader on iPhone/iPad.
    Shradha

  • How can I add multiple email addresses  from spreadsheet into email?

    how can I add multiple email addresses  from spreadsheet into email?

    I have tried that, but the system reads the emails as one long email and I can't find any way of separating them - it ignores spaces, colons and I have also tried putting them through a word doc... still does not work. It works perfectly easily on a PC system!! ( I have just moved to a mac!)
    any ideas would be good
    thanks

  • How can I add multiple contacts to a text message on a droid bionic

    How can I add multiple contacts to a text message on a droid bionic?

    DH
    I was thinking that if he wanted to create multiple keyframes he might be creating a repeated effect rather than manipulating values that are shot specific - like creating an oscillation or some repeated step effect.  If he was creating keyframes specific to his content he'd probably not look for a way to do it "quickly" since each keyframe would require manipulation of specific values. 
    So my thought was to generate the series of keyframes on a dummy clip created for this specific purpose, copy the clip, paste attributes (maybe turn off "Scale Attribute Times") and add bunches of keyframes at once. 
    Still, you're right, it's tough to divine the intent of someone very new to FCP.  His question could be based on a misunderstanding about the use of keyframes.
    P

  • How can I add multiple, successive destinations in "Maps" such as on a delivery trip with several stops ?

    How can I add multiple, successive destinations in"Maps" such as on a delivery trip with multiple stops and so needing driving directions i.e. set up a route ?

    Maps help:
    Mark a location with a pin
    You can drop a pin on a location to get directions or help you find it again. 
    Open Maps
    On your map, go to the location you want to mark with a pin.
    Choose View > Drop Pin. If the pin isn’t exactly where you want it, put the pointer on it and hold down the button until the pin “hops.” Drag the pin into place, then release the button.
    To see information about a location, click its pin, then click the Info button. To close the Info window, click outside of it.
    To remove a pin, select it, then choose View > Clear Pin.
    Get directions
    Using Maps, you can get directions to help you navigate on foot or behind the wheel. Once you've decided where you're going, click the Share button to send your map and directions to your iPhone. (Your iPhone must have iOS 7 and be signed into the same iCloud account as your Mac.) 
    Open Maps
    Do one of the following:
    Click Directions to open the directions sidebar, then enter the starting and ending locations.
    On the map, click a pin to display its info banner, click the info button to see more info, then choose “Get Directions.” (If your starting location doesn't have a pin, you can Control-click or tap it with two fingers, then choose Drop Pin.)
    Click either the car (driving directions) or person (walking directions).
    If multiple routes appear on the map, click the one you want to take.
    To zoom in on a turn, click it in the directions sidebar.
    To close or reopen the directions sidebar, click Directions in the toolbar.

  • How can if add multiple addresses into Contacts

    In OS 10.9.5 how can if add multiple addresses from from a tab separated file into contacts.
    I have a txt file with fields separated by tab and each and each record terminated a return,
    Importing using file>import tries to put all the data onto a single card
    Help

    Contacts – Import/Export

  • How do I add multiple rows in Numbers for iPad?

    how do I add multiple rows in Numbers for iPad?

    Hi James,
    On the iPod I can only insert what is on the clipboard but I can insert however many rows I have there. Is it working differently for you? Benjoon seemed to think that he could not do this in Numbers. He was ruling Numbers out because of it. He doesn't need to do that because of this issue.
    If I was needing to insert multiple blank rows often I might keep a table of blank rows or just some blank rows at the end of the working table that I could copy/paste. This is no different than Numbers on the Mac.
    quinn

  • How can I add a new line item for production order?

    HI all,
    How can I add a new line item for production order through BAPI/FM? Thanks in advance.

    Hi Mil,
      Unfortunetly SAP is not in front of me.
    But if possible go to BAPI transaction , check for any production order's bapi for CHANGE purpose. Where you will be able to add your new line.
    Reward if useful!

  • I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
    In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

  • How can I add multiple folders to iTunes with Windows 8?

    I have windows 8 and the latest version of iTunes on Windows 8. How can I put multiple folders of music onto iTunes

    Enable the menu bar with Ctrl+B. Then use File > Add Folder to Library.
    tt2

  • How do I add multiple fills more accordingly?

    I sometimes like to add a little more depth into my drawings than having single paths be of a single fill. In the illustration below, for example, I have two balls drawn.
    The first was made the way I was taught. A stroke and fill - all consisting of one path. The second, I tried something different to help show more depth, but it consists of three paths. A black stroke with no fill, a dark red fill with no stroke, and a background red fill with no stroke. The first way was easier since I could add a stroke and fill to the same path, but I can't capture more details that way if extra colors touch the stroke. And if I were add paths on top of an object, then I would have to be too percise so they don't overlap the stroke. This second way, I at least have a stroke to draw behind.
    Is this making sense to people? I want check here to see if there's an easier way to do this. Making an object that only consists of an outline and not a fills doesn't seem right if it is meant to include a fill. Any help?

    bleduc,
    To have multiple fills that way you need multiple paths. You may:
    1) Create the basic (circular) path with no stroke and Ctrl/Cmd+C+F to make a copy in front;
    2) Create the partially overlapping path with no stroke;
    3) Select the copy path from 1) and the path from 2) and Pathfinder>Intersect (depending on version you may need to hold Alt/Option) to create the top path;
    4) Group 1) and 3) and in the Appearance palette tick to select Group, then in the flyout tick Make New Stroke and drag it down below Contents and apply twice the Stroke Weight you want visible.
    If you have corresponding multiple sets in the same Layer, you may apply the new stroke to the layer.

  • How can we add multiple editable region in template

    Hi,
    My issue is when I am going to create a new template I want to add multiple editable region in template and I want to use those editable region per page wise so that in page editor I will add different text for each page for those editable region.
    I can use incontxt editor to change those area for different pages although is it possible to use online editor to add different text for different pages.
    I also have a plan to solve the issue ... that is also not working.
    Plan is .. if we can use tag (not the default one in template), want to use different tag like {tag_headding},{tag_sidebarcontent} in template so that we can use those tag in template and fill the field in the page online editor, so when differnt page we will create we will fill those field for those tag and that will show in the front view of the site.
    Please help me. I am really stuck on this issue.
    Thanks in advance.
    Projjwal

    Hi Projjwal,
    Yes, if you look at many of the commercial BC templates available the way they are getting around it is with Content Holders and multiple templates.
    Now I know you will say that multiple templates is high maintenance ..... not if you use Content holders for both recurring content and unique content.
    Think of Conent Holders as 'Includes' ... I have been doing it this way with templates that I build from scratch as well. Easier than you think.
    And that way the client can change content such as footer information or whatever that appears on all pages without editing the template itself.
    Only drawback is that if you are using Design View in Dreamweaver the content holders don't render. But other than that Content Holders are awesome.
    Brad

  • How can i add multiple photos to an imovie at once from my ipad?

    I am trying to create an imovie of photos that I have stored on my ipad using my ipad. It is only letting me add one photo at a time which is taking way too long. Is there a way to add multiple photos at once? Also, can I apply changes (like removing the Ken Burns effect all at once from all of the pictures? Hopefully I dont have to do it one at a time or it will take waay too long!
    thanks

    When creating a new email, open the Photos app.
    Select the Album.
    Tap Select.
    Select the items desired.
    Tap the Sharing icon and select Mail.
    Create the email.
    When replying to an email, it is not possible.

Maybe you are looking for