How can I add pretest quiz after chapters/groups

My project requires the learning to be divided into 17 chapters with pretests or quizzes at the end of each one then one final test at the end. It is restricting me from moving any quiz slides around in any segment type arrangements. It is locking all quiz slides into one group in the filmstrip view.
Also to create a "chapter" I am naming and "grouping" accordingly. But no control over where I can section quizzes into the chapters. Please help. I'm on captivate 8 on Mac mavericks.

Pretest slides have to be together at the start of the file, and will disable navigation by playbar or by TOC.
It is a SCORM requirement that each file can have only one (real) quiz. Quiz slides can be distributed in a file, score slide will be at the end. If you need to report more quizzes, you have to split up your course in different files.

Similar Messages

How can i add an Engraving after i order the ipad ( add, not edit)

how can i add an Engraving after i order the ipad ( add, not edit)

Sorry, I don't mean to appear rude, but I don't understand the question. What do you mean "how do you call"? You pick up the telphone and call the store's number, just as you would any other person or company.
None of the Apple Stores have on-line chat.
Regards.

How can I add facebook contacts in a group in ios 6

Hi I need to know how can I add facebook contacts in a group in ios 6 without getting them in my contact list, thanks.

They are automatically put in a group called Facebook, and your other contacts in another group...if synced from a Mac, they will be labled From My Mac. In the contacts app you can chose what groups are visible: Contacts>Groups...add or remove the check by touching the group.

How can I add a pause after each photo to my flash file?

How can I add a break to my sequence of photos on a flash file.
I created a flash with different photos and I want each one to stay on the stay for about a minute before moving away.
How do I do this? Please help

//Timers are measured in milliseconds
var minuteTimer:Timer = new Timer(60000);
minuteTimer.addEventListener(TimerEvent.TIMER, exchangePhoto);
function exchangePhoto(e:Event):void{
//put your code of exchanging your photo here
//you have to start the timer explicitly, when your app starts
minuteTimer.start();

How Can I add other people to the group calling wh...

Hi, Could you tell me how can I do this? My laptop is broken and it's in the repair center now so I have to make a call by phone or tablet. However, everytime I have to add another person to the group calling, I have to ask other people to add him/her and it's annoying. Is it available to add people from my side? Thank you in advance.

You can add people to the chat via the little plus button left of the chat bar. If they're already in the chat and you want to add them to the call, only the host of the call can add them. I believe they have to be contacts with the host of the call or they both have to have their settings set so that they can receive calls from non-contacts as well.

How can I add a contact to a group on my iPad Air or IPhone 6?

I'm away from my computer for a while and was trying to add a contact to a group on my iPad/iPhone. I don't want to download another app to handle this simple task. All my mobile devices are up-to-date and have plenty of memory. I tried logging into iCloud on a non-Safari browser but the contact list wouldn't download so I could work on it. Did I miss a link somewhere inside of the Contact edit where I could just add to a group? Thanks for any help you can give me.

You are not doing anything wrong. The feature that you need is totally lacking in the built in Mail app on the iPad.
There are a couple of third party mail apps that will let you do this ... MailShot and Group Email with Attachments. You can check them out in the App Store.

How can I add a contact to a group on my iPhone?

How do I add a contact to an existing group on my iPhone?

Should not be a problem. If you have set up your
groups in Address Book, they will sync over to your
iPhone. If you view All Contacts, you should have a
tab in the upper left corner which shows Groups. You
hit that, it takes you back to your Group List. Pick
the Group you want to view and this takes you to a
list of contacts within that group. Then in the
upper right corner hit the + key and add your
contact. When you sync back up, your contact should
appear in your Address Book under all Contacts and
under the assigned group.
Hope this helps.
Mac
OS X (10.4.10)
Mac OS X (10.4.10)
This only solves half the problem. If you have created a NEW contact from a Google Map lookup, you cannot assign it to a group on the iPhone. You have to wait until you sync back up with Address Book, assign that contact to a group, then sync again. I have pulled a lot of new contacts through the Google Map function (which is amazing BTW) but I have yet to find a way to assign the new contact to a group. Any ideas?

How can I add my photo after setting up family share

I Set family share as organizer and did not add a picture can i now add my picture.

Hello there, bryan1953.
The photo used by Family Sharing is based on your Contact card in Contacts. The following Knowledge Base article walks through how to add a photo:
Contacts: Add or change contact pictures
http://support.apple.com/kb/PH11580
Add or change a picture
Select a contact or your own card, and then double-click the picture well.
Select a picture:
Drag an image to the picture well.
Click Camera to take a picture.
If you have pictures in iPhoto, click the Faces button to use a face from iPhoto.
If the contact is linked (it’s in multiple accounts, but displayed only once in Contacts) and has multiple account pictures, click Linked.
Click Edit to edit the picture.
To zoom in and out of the picture, drag the slider. Drag the picture to change which part of it is visible.
To rotate the picture, hold down the Option key while you click and drag the picture.
To apply special effects, click the Effects Gallery button and choose an effect.
Click Done.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How can I add multiple addresses to a group within address book?

I realize you can add in addresses by going to 'Message' then 'add Sender to Address Book,' but what I'm interested in doing is within Apple Mail, adding multiple addresses into a specific group within address book. I've tried to do this using mail scripts but keep getting an error.
Is it possible to do this?
Thanks.
David

So far, FWIW all I've got is individual AddToAddressBook, then in AB itself, drag and drop one by one from the main list into the desired group.

Views in MM03, how can I add fields and changes fields labels

Hi !!
I need to change some labels that appear on Sales: Sales Org 2 (view on MM03, MM02..MM01)...
Im not sure what I can do this.. Im an ABAP Programmer(beginner) and I know how I can change labels of fields in programs(reports) that I did...but in This case. I don't know what I can do...
example: when I enter on MM03..I select differents views(including Sales: Sales Org 2), later I specify sales Org and distribution Channel (I need to specify this information for see these fields on this TAB Sales: Sales Org 2).
When I access in tab: Sales: Sales Org 2, I can see one Group that it's called
Material Groups that contain two fields called MVKE.MVGR1 AND MVKE.MVGR5... I saw in the screen these fields with the description from each field..example: Material Group 1 (MVKE.MVGR1 )... I would like to know :
1.- How Can I change the description Material Group 1 (in this screen) by other description (example: material test)...
2.- How can I add more fields in this group...example..If I need to add MVKE.MVGR2 ..??
I will appreciate your help!!!
I will give you points for your answer
Alice

Hi Alice,
And do I need to change in this section too.... SPRO -> SAP Reference IMG -> Logistics general -> Material master -> configuring the material master -> ...
If I need to add some values???
After you made label changes on custom screen then you need to go configuration (Define Structure of Data Screens for Each Screen Sequence) to replace the standard SAP screen with custom screen. You can also do testing for custom subscreen as well. Give it try.
And how about If I move this screen??...is it dangerous??...or how can I know if this screen affect other section of programs?
I do not understand your questions. Can you elaborate more?
Regards,
Ferry Lianto

After creating a new playlist in iTunes, how can I add my entire music library --at once-- to the new playlist. I want to download all my music from Icloud at once on my Macpro

After creating a new playlist in iTunes, how can I add my entire music library --at once-- to the new playlist. I want to download all my music from Icloud at once on my Macpro

You have two separate questions here...
To get all your music into one playlist, select Music in the sidebar and click the Songs view at the top. Then, highlight all the songs and drag them into your playlist.
I don't know if it's possible to download all Purchased content (or do you mean iTunes Match content?) at once; try a few Google searches.

How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

How can I add the audio content cd after logic finished installing ?

There was an eror installing the Audio Content CD 1 and I did not notice. Everything else installed properly, Audio Content CD 2, Jam Pack, but how can I add the Audio Content CD1 after Logic has finished installing?
If you can help me please be very specific as to how to do it so that I can follow the directions properly.
Please help me.
Thanks

Hi
You could re-run the installer, or, once you have updated to Logic 9.1.8 you could use the "Download Additional Content" function in the Logic Pro menu. It will tell you what is installed and what is incomplete.
CCT

I used to be able to attach a document to an iCal entry. After the latest update, it appears this option has been removed. How can I add an attachment now? Thanks!

I used to be able to attach a document to an iCal entry. After the latest update, it appears this option has been removed. How can I add an attachment now? Thanks!

Hi Dan,
Yes, iCal 4.0.4 (1395.7). In edit mode, the 'attachments' option is between 'Invitees' and 'URL' (see below). As I said this is for calendars under On My Mac, I suspect you are not seeing this as your event is on MobileMe.
Best wishes
John M

How can i add fields to a cube which is in production support

hi,
how can i add fiels to a cube which is in production support.

Hi Maruthi
You need to add new fields to cube in Development system and then transport it to production after testing.
Edit cube in RSA1. Add the new infoobjects from right hand directory to left hand pane and assign these new infoobjects to suitable dimensions. Save and activate the infocube. Now go to change update rules for this infocube and do proper mapping of these infoobjects.
Save & activate the update rules.
RSA1-> Transport connection-> select cube, update rules and related objects and create transport request.
After testing is done, give the transport request number to your Basis person and he will do the transports for you.
Regards
Pradip

How can I add pretest quiz after chapters/groups

Similar Messages

Maybe you are looking for