How can I add recording time to a single recording not a series recording?

If I set-up a series recording it allows me to add minutes to the recording time why can't I add time to a single recording? For example if I want to record a single show tomorrow I find it on the guide and hit record. Now I want to add a few minutes on the end of the show because I know it always runs over it's advertised time why can't I add the time? It doesn't gives to extra options for a single recording. The only time I can add time to a single recording is if the show is currently on then it allows me to add time but, not before the show is on. So what good does that do? Comcast allowed me to set-up extra options to a single recording.

Actually you can. It's a bit clumsy but what you have to do is go to the DVR menu, select scheduled reordings, select the recording you want to extend, scroll through the menu and you will find an option to modify the start / end time.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Similar Messages

How can I add location to a photo that does not have a gps location? On iPhoto it was easy.

how can I add location to a photo that does not have a gps location? On iPhoto it was easy.

You can use the Settings in the slideshow to Show Captions, either the Description filed be display, the Title field or both.
If you create the slideshow in iDVD from still photos from iPhoto you can add the Description and/or Title via the settings in iDVD.
Since iDVD adds both automatically the user must go thru the slideshow and remove those items not wanted.

TS3423 Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not s

Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not start?

sonjadg,
you can purchase a replacement pair of grey installation DVDs for your MacBook Pro from either Apple or iFixit. If Startup Manager is only showing an OS X Installer volume, then it sounds like the Mavericks installer had a problem midway through its installation process. To fix this, you’re going to need to erase your internal disk and reïnstall your original version of OS X from the grey Mac OS X Install DVD, use Software Update to get it back to 10.6.8 (presuming that your MacBook Pro originally came with Snow Leopard), and then restore from Time Machine.

HT5312 How can i add a rescure email if i did not add one to begin with?

So i forgot my security questions, i read the option about the resccue email.. how can i add one now becuase when i made this itunes account i never set a rescue email.

Use the ExpressLane at https://expresslane.apple.com and the iTunes and iTunes Store for help.

How can I add one seat for a single app to a team account?

We currently have a team for our art department, which needs Photoshop, Illustrator, In Design and Acrobat. We have other departments that just need Acrobat. How can I add one seat, that has access to only one App so I'm not paying the full price?

Did you ever figure this out? I need Photoshop single licenses and Adobe is making this ridiculously difficult...

How can i add a time stamp to tdms file?

I want the data and the time for the tdms file generated?
how can i do that?
should i cinvert .tdms to .lvm and use the data storage option or excel add on option for .lvm file created?
cant i directly have the time stamp for tdms file generated?

How are you acquiring the data in the first place? That will matter in how we want to approach this.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How can i add multiple validations for a single input box in adf?

hi,
i want to add multiple validation for a single input text control in adf like number validation and its existence in database.
MY JDEV VERSION IS 11.1.1.5.0
pls help !!!!

Hi,
1.I want to validate if the value entered is pure integer
Option 1-
select the component and in the Property Inspector, in the "Core" category select a "Converter" format, select javax.faces.Number, if the user put a string, adf show a dialog error or message error...
Option 2-
or use the Regular expression:-
http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_validateRegExp.html
https://blogs.oracle.com/shay/entry/regular_expression_validation
Also check this:-
http://docs.oracle.com/cd/E15523_01/web.1111/b31973/af_validate.htm#BABHAHEI
Option 3-
Frank in his great book 'Oracle Fusion Developer Guide' shows a example using a javascript for input which is allowed only for numbers. You can manipulate for your requirement.
Here is the code:
function filterForNumbers(evt) {
    //get ADF Faces event source, InputText.js
    var inputField = evt.getSource();
    var oldValue = inputField.getValue();
    var ignoredControlKeys = new Array(AdfKeyStroke.BACKSPACE_KEY, AdfKeyStroke.TAB_KEY, AdfKeyStroke.ARROWLEFT_KEY, AdfKeyStroke.ARROWRIGHT_KEY, AdfKeyStroke.ESC_KEY, AdfKeyStroke.ENTER_KEY, AdfKeyStroke.DELETE_KEY);
    //define the key range to exclude from field input
    var minNumberKeyCode = 48;
    var maxNumberKeyCode = 57;
    var minNumberPadKeyCode = 96;
    var maxNumberPadKeyCode = 105;
    //key pressed by the user
    var keyCodePressed = evt.getKeyCode();
    //if it is a control key, don't suppress it
    var ignoreKey = false;
    for (keyPos in ignoredControlKeys) {
        if (keyCodePressed == ignoredControlKeys[keyPos]) {
            ignoreKey = true;
            break;
    //return if key should be ignored
    if (ignoreKey == true) {
        return true;
    //filter keyboard input
    if (keyCodePressed < minNumberKeyCode || keyCodePressed > maxNumberPadKeyCode) {
        //set value back to previous value
        inputField.setValue(oldValue);
        //no need for the event to propagate to the server, so cancel
        //it
        evt.cancel();
        return true;
    if (keyCodePressed > maxNumberKeyCode && keyCodePressed < minNumberPadKeyCode) {
        //set value back to previous value
        inputField.setValue(oldValue);
        evt.cancel();
        return true;
2.I want to check if the value exists in my respective DB You must be having EO or VO if you want to validate with database in that case use the solution suggested by Timo.
Thanks
--NavinK

How can I add a Time Capsule 3TB to a network with an older Time Capsule 2TB?

I have a 2010 Macbook Pro with 500 GB HD and a 2013 Macbook Pro with 1TB HD. I am using Mavericks and will migrate to OS X Yosemite when it becomes available. I tried backing both up with my older Time Capsule with 2 TB of space but it isn't enough. So, today I bought the new Time Capsule 3 TB to add on to my network. I want to use both TCs in order to have 5 TB for backup.
I have a Brother printer and my Comcast Cable Modem connected to the old Time Capsule. I also have an Apple TV with 1080p HD that uses the internet wirelessly through the old Time Capsule.
My first question is what should connect to what and in what order? Should the new TC connect directly to the old TC and if so, with what cable?
My 2nd question is: Can I move several 100 GB of old data that I rarely use onto the 3TB TC so that I could access the data from either computer whenever I need it, without having the data on either computer?
Thank you.

This is a pretty easy setup.
Basically just plug the new TC WAN port into the old TC LAN port.
Run the airport utility on the computer and it should recognise that the new TC is plugged into another one.. and setup bridge mode and create a wireless network.. if not you can jump in and edit it at the end of the setup.
You could also swap things around with the new TC as the main router.. and the old one as the secondary.. but people are experiencing some issues with WAN connection to some cable modems.. so you need to be prepared if you have issues to go back to the original setup.
You will use an ethernet patch cable to connect them. I recommend if you have them in the same area place them at least a couple of meters apart.. so buy a 2-3M patch cable at least.. (8-9ft). Even better would be to install the new TC closer to the clients that will use it.. to improve wireless in dark corners of your house.. but all that can come later.
My 2nd question is: Can I move several 100 GB of old data that I rarely use onto the 3TB TC so that I could access the data from either computer whenever I need it, without having the data on either computer?
This is a lot harder question.. not in how to do it.. it is simple.. copy and paste files onto the new TC.. that is not the issue..
The problem is backup of the files that no longer exist on the computers. Ironically the TC is problematic for one major reason.. it cannot back itself up.. nor can Time Machine (TM) backup network drives. Even though TM uses the TC to store the backup it cannot actually work to backup the TC. The problems are not insurmountable.. you can use a third party backup.. eg CCC but it will be extremely slow. A better strategy if one of your computers is a desktop is to install an external drive and share it to the network. The data rate will be hugely better.. and TM can backup as per normal.

How can I add the Time Capsule to my Netgear Nighthawk R7000's Network?

I Want to connect my Time Capsule To My Nighthawk and still have access to the rest of my networt. How do I do it?

Thanks for confirming that for me.
If the Time Capsule has not ever been set up, then it is still in its factory default settings and you can proceed with the setup.
Connect the Ethernet cable from one of the LAN <--> ports on your Netgear router to the WAN "O" port on the Time Capsule
Power up the Time Capsule for a minute or two. The light will be slowly blinking amber at this time.
Click the WiFi icon on the menu bar at the top of the Mac's screen
Look for a setting of New AirPort Base Station
Click on Time Capsule just below that
The example below shows an AirPort Extreme. You will see Time Capsule on your screen.
The setup utility will open up and take 15-20 seconds to analyze the network, then a screen similar to this will appear, except you will see a Time Capsule icon:
Network Name........Type in the name of the network that you want to use. If you want the Time Capsule to "extend" the Netgear network, type in same wireless network name that the Netgear router is using.
Base Station Name......Type is a simple name for the Time Capsule. Mine is TC, for example.
Password........Type in the password that you want to use for the network. If you use the same wireless network name as the Netgear, then you would type in the wireless password for the Netgear network here
Verify the password that you entered
Click Next......and the utility will set up everything for you. When you see the message of setup complete, click Done.
That's it.

How can I delete a Time Machine backup which did not complete?

I was running a Time Machine backup when the disc got unmounted. Therefore I know all of the data is not backed up.
I would like to delete that entry and rerun "Back Up Now" to start over.
I tried deleting the folder with the latest time stamp on the drive and ran "Back Up Now". There was a very small amount of data that it then backed up.
Obviously there is a large gap in manually managing this process and I would like to know the best fix.
Thanks in advance.

Please triple-click anywhere in the line below on this page to select it:
tmutil compare | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign (“$”) to appear below what you entered.
A TextEdit window will open with the output of the command. Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
Files that you’ve excluded from backup, or that are excluded automatically, are ignored.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.
Caution: Under some conditions, tmutil may falsely flag files as not having been backed up when in fact they have been. It can be confused by multi-linked files, or by files with a modification date earlier than the one in the snapshot. This will not be an issue for most users. If the results of the above procedure surprise you, inspect your snapshots directly.

How can I add a text( In CRM 2007 called Note) to the current entity?

Dear Friends,
I want to add text type 'SU99' with text 'Hello World' to a CRM transaction, how to do this by BOL? Is there any example component for this issue?
Thanks and best regards,
Anders

Hello Anders,
here a piece of code where we add a text from type S002 to the Servicerequest:
lr_bt = lr_bt_adminh->get_related_entity( iv_relation_name = 'BTHeaderTextSet' ).
      lr_bt = lr_bt->create_related_entity( iv_relation_name = 'BTTextHAll' ).
      lr_bt->set_property( iv_attr_name = 'TDID'
                                iv_value = 'S002').
      lv_conc_lines = 'called Tel.'(003).
      CONCATENATE lv_conc_lines lv_phone_no into lv_text.
      lr_bt->set_property_as_string( iv_attr_name = 'CONC_LINES' iv_value = lv_text ).
      lr_core->modify( ).
I hope this helps.
Kind regards
Manfred

I am trying to manage family sharing and I get a warning "invalid apple ID" that accounts can participate in one Family at a time. How can I add my daughter when I can't even access my account?

I am trying to manage family sharing and I get a warning "invalid apple ID" accounts can participate in one Family at a time. How can I add my daughter when I can't even access my account?

Your best bet would be to try resetting the password to the account that you would like to use via iForgot
Once you log in to that account change the email address to anything, it can even be fake its just a placeholder
After you do that you will be free to change your old email address on your appleID to the new one that is now free to be used as it is no longer attached to the other account.

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

How can I add a new record in an Access table.

How can I add a new record in access with LabView, using activex, without using the database connectivity tools.
Message Edited by Noawena on 05-16-2008 09:25 AM

Much easier with a toolkit but you could use ADO objects,
get connection, make a SQL object "INSERT record INTO table where ...."
Execute the parameterized query
Free up record sets data
close connection when done.
This is a very simplified version
Paul
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

How can i add rows to a JTable at run time ??????

hi there
how can i add a row to a JTable at run time? and display the table after the change? thank you.

For adding or removing the rows from the JTable, you have to use the methods on the table model. I would show you a simple implementation of table model.
public class MyTableModel extends AbstractTableModel {
private ArrayList rowsList = null;
private String [] columns = { "Column 1" , "Column 2", "Column 3"};
public MyTableModel() {
rowsList = new ArrayList();
public int getRowCount() {
return rowsList.size();
public int getColumnCount() {
return columns.length;
public void addRow(MyRow myRow) {
//MyRow is any of your object.
rowsList.add(myRow);
fireTableDataChanged();
public void removeRow(int rowIndex) {
rowsList.remove(rowIndex);
fireTableRowsDeleted(rowIndex, rowIndex);
public Object getValueAt(int row, in col) {
MyRow currentRow = (MyRow)rowsList.get(row);
switch (col) {
case 0:
//return the value of first cell
break;
case 1 :
//return the value of second cell
break;
case 2 :
//return the value of third cell
break;
}Then create the table using the TableModel using the constructor new JTable(TableModel) and then when you want to add/remove a row from the table, call myTableModel.addRow(MyRow) or myTableModel.removeRow(rowIndex)....I hope that this solves your problem.

How can I add recording time to a single recording not a series recording?

Similar Messages

Maybe you are looking for