HOW CAN I ADD SUBTITLES TO EACH SHOT?

I have an edit on Final Cut Express needs to add subtitles in both English and Chinese characters. And I am thinking of using iMovie08 or iMovie09 to finish my edit before my deadline of presentation. Can anyone advice & teach me what to do next, BTY, I have finished subtitles in Final Cut Express 4 already, just the Chinese characters cannot copy and paste or type or imports... Many thanks!

At the very top of your display is a place called Help. It is chock full of great tutorials about almost everything the iMovie 9 can do & how to do it. It only took me about 4 clicks to get where I found the right tutorial. They have one for titles, it's second on their list. It'.s at
http://www.apple.com/ilife/tutorials/#imovie
Try it out, you might be surprised.

Similar Messages

  • How can I add subtitles with imovie?

    Can it be done? I'm trying to do something similar to closed captioning for a project I'm currently working on. It is a video I did in spanish, but need to add english subtitles. Any ideas?

    hey appleman,
    i noticed your reply here... it was helpful but i still don't get it. perhaps you could enlighten me?
    first of all, i had to use imovie hd (6.0.3) because imovie '08 wouldn't import my movie clip... i'm frankly baffled at how crippled and useless this newer version is.
    i managed to create subtitles one by one by splitting my movie with cmd-T, typing my title, dragging the slider and checking the preview until the title appeared for the right length of time, and clicking "add". this worked well but was extremely slow, so i looked for a more efficient way.
    then i read your post and tried following your advice. i split my entire movie into clips at the appropriate intervals for subtitles (using cmd-T).
    at this point i got stuck.
    first of all, i notice imovie allows adding multiple subtitles, but i couldn't find a way to sync them to my movie.
    i tried dragging the titles to the appropriate spots, between clips, but unfortunately, imovie fades these titles out before the clip ends!
    if i extend the title's duration by dragging the slider, imovie re-splits the movie to fit the length of the title!
    can imovie somehow be made to understand that the length of the clip is also the length i want the subtitle to be???
    also, what's the point of imovie's multiple subtitle feature? does it work? can i move from one subtitle to the next? how is this done?
    thanks a lot in advance!

  • How can i add subtitles on tv shows bought on itunes ?

    thanks for your help !

    you can use iSubtitle to add soft subtitles to files purchased from the iTunes store.
    find the subtitles on e.g. http://www.opensubtitles.org/en

  • How can I add  subtitles to music video created in Premiere Pro cc?

    Have searched extensively for a complete guide to adding subtitles to Premiere pro cc project but have not been able to find a definitive answer. Any help is greatly appreciated. Thanks!

    Can anyone provide the bottom line on using the captions option in PR CC for streaming?
    Adobe Premiere Pro Help | Closed Captioning
    YouTube provides such support:
    Turn captions on and off - YouTube Help

  • How can i add subtitles to a movie I have already purchased in the itunes Store? I want to be able to add french subtitles to the already English movie.

    hellpppp meee i just want french subtitles so when i watch the movie with my french friend, she'll understand!! thanks

    Go to iTunes prefs>Playback - from the drop down menu select your language.
    You will see sub-titles if the media is programed with sub-titles. Not all content has sub-titles.
    MJ

  • How can I add an audio file to each slide when I export to HTML Keynote 6.2

    How can I add an audio file to each slide when I export to HTML Keynote 6.2
    I am trying to create an audio slide show instead of a movie

    Drag and drop one music files onto each slide then export. (File > Export > HTML)

  • How can I add a pause after each photo to my flash file?

    How can I add a break to my sequence of photos on a flash file.
    I created a flash with different photos and I want each one to stay on the stay for about a minute before moving away.
    How do I do this? Please help

    //Timers are measured in milliseconds
    var minuteTimer:Timer = new Timer(60000);
    minuteTimer.addEventListener(TimerEvent.TIMER, exchangePhoto);
    function exchangePhoto(e:Event):void{
         //put your code of exchanging your photo here
    //you have to start the timer explicitly, when your app starts
    minuteTimer.start();

  • How can I add multiple contacts to a text message on a droid bionic

    How can I add multiple contacts to a text message on a droid bionic?

    DH
    I was thinking that if he wanted to create multiple keyframes he might be creating a repeated effect rather than manipulating values that are shot specific - like creating an oscillation or some repeated step effect.  If he was creating keyframes specific to his content he'd probably not look for a way to do it "quickly" since each keyframe would require manipulation of specific values. 
    So my thought was to generate the series of keyframes on a dummy clip created for this specific purpose, copy the clip, paste attributes (maybe turn off "Scale Attribute Times") and add bunches of keyframes at once. 
    Still, you're right, it's tough to divine the intent of someone very new to FCP.  His question could be based on a misunderstanding about the use of keyframes.
    P

  • HT201342 How can I add an e-mail address to my existing icloud addresses?  I currently only use one and I would like to ad two more?

    How can I add an e-mail address to my existing icloud account?  I curently only use one of the three.

    Each iCloud account only has a single iCloud account.  If you want, you can add up to 3 alias addresses that will receive email in the same iCloud inbox, as explained here: http://support.apple.com/kb/PH2622.

  • How can i add to a listBox items near in a new column other items ?

    The items on the right i changed the property of the listBox1 righttoleft to Yes.
    My problem is i want to build a new column for the number so each number i'm adding will be next on the left to the belong item string. And not under it like now.
    1. Maybe i need to use another control and not listBox ?
    2. How can i add column/s and also maybe adding a title to each column like: Names Id Number....?

    If you want columns, you should consider a
    ListView or
    DataGridView.

  • How can we add a control on our .jsp webpage for uploading several image fi

    How can we add a control on our .jsp webpage for uploading several image files as done in gmail attachment, Where a Remove button also appears if we wanna remove the particular attachment.

    The SCOM Management Server is in Domain A.  I've tried it already and it has failed.  
    So just to clarify the method I used was to go to Administration>Security>User Roles.  Then New User Role>Read-Only Operator.  In the Create User Role Wizard I then gave the User Role a name, Clicked "Add" under User Role Members.
     Then the Select Users or Groups window pops up and I changed the Locations from Domain A to Domain B and searched for the user, which it's able to find, then clicked "OK" to add it to the User Role members which it does just fine.  On
    the next page which is Group Scope I checked the one group I want this account to have access to and then click next.  This brings me to Dashboards and Views where I click the radio button for "Only the dashboards and views selected in each tab are
    approved" and chose the folder of dashboards I want this account to access and then click next.  This brings me to the Summary and I click "Create".  At this point it thinks for a moment then closes out the wizard but the new Read-Only
    Operator does not appear.  I then look in Event Viewer and see the Event I pasted above.
    Am I doing something wrong here?  Any guidance on how to get around this issue would be much appreciated.
    Thanks,
    Jake

  • How can I add an attribute to a node?

    Hi,
    How can I add an attribute to a node of a DOM Document?
    I want to add attribute Maximum="6" for all Grade node as <Grade Maximum="6">.
    Grade is a third level node in my document.
    Thanks

    Hi,
    How can I add an attribute to a node of a DOM
    Document?
    I want to add attribute Maximum="6" for all Grade node
    as <Grade Maximum="6">.
    Grade is a third level node in my document.
    ThanksGet the father of "Grade" elements as an element. Then get all elements named "Grade", and for each one set attribute "Maximum" with value "6". If you read api documentation you will know which methods to use.
    But for helping you in getting the "Grade" parent.
    1) get the root element of the Dom Doc
    2)get the father of the "Grade" father: getElementsBytagName("his name") -> it will return a Node List get the first element casting as Element if there's only one, or elese if not case
    3)the same method in 2 get the "Grade" father
    4)getElementByTagName("Grade") over the "Grade" father -> for each "grade" element on nodelist do whatever you need
    i hope u understood...

  • How can i add two values under the same property?

    Hi all,
    How can i add two values under the same property name in a
    prop list? For example:
    [question1: "item1","item2", question2: "item3","item4"]
    To be more precise, i am creating a property list and I want
    whenever a two values have the same property name to be added int
    he list under the same property. For example:
    gMyList.AddProp (#""&question&"" & x,
    member("input").text)
    question is a variable that is updated fromt he user's input.
    Now, whenever somethign like this happens:
    question = "question1"
    member("input").text = "five"
    question = "question1"
    member("input").text = "six"
    I want to output list to be:
    [question1: "five","six"] and so on
    Any ideas?

    Maybe you could make each property a list (so you have a
    property list full
    of lists), and add multiple values to the list held in a
    particular
    property?
    Cheers
    Richard Smith

  • Views in MM03, how can I add fields and changes fields labels

    Hi !!
      I need to change some labels that appear on Sales: Sales Org  2 (view on MM03, MM02..MM01)...
       Im not sure what I can do this.. Im an ABAP Programmer(beginner) and I know how I can change labels of fields in programs(reports) that I did...but in This case. I don't know what I can do...
       example: when I enter on MM03..I select differents views(including Sales: Sales Org  2), later I specify  sales Org and distribution Channel (I need to specify this information for see these fields on this TAB Sales: Sales Org  2).
      When I access in tab: Sales: Sales Org  2, I can see one Group that it's called
    Material Groups that contain two fields called MVKE.MVGR1 AND MVKE.MVGR5... I saw in the screen these fields with the description from each field..example:  Material Group 1 (MVKE.MVGR1 )... I would like to know :
    1.- How Can I change the description Material Group 1 (in this screen) by other description (example: material test)...
    2.- How can I add more fields in this group...example..If I need to add MVKE.MVGR2 ..??
      I will appreciate your help!!! 
      I will give you points for your answer
    Alice

    Hi Alice,
    And do I need to change in this section too.... SPRO -> SAP Reference IMG -> Logistics general -> Material master -> configuring the material master -> ...
    If I need to add some values???
    After you made label changes on custom screen then you need to go configuration (Define Structure of Data Screens for Each Screen Sequence) to replace the standard SAP screen with custom screen. You can also do testing for custom subscreen as well.  Give it try.
    And how about If I move this screen??...is it dangerous??...or how can I know if this screen affect other section of programs?
    I do not understand your questions. Can you elaborate more?
    Regards,
    Ferry Lianto

  • How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

    How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
    After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

    There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
    Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
    I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

Maybe you are looking for