How can I add the signals produced by two signal generators

I have created two signal generators, I need to add the two values, multiply them by a constant, and sum the values of the signals over a period of time. What is the best way to do this? I can't even get the two signals to sum. It tells me that the two signals aren't of the same data type. They are identical though.

ant11 wrote:
I have such question--how can I convert the signal(its amplitude) to integer in Labview? Is there such possibilty? And another question is about why I cannot create the DC signal with any amplituide other than 0--how can I do it? And just DC signals I need to sort -- so I want to add its values, multiply by constants, substract, integrate, compare--could I do it without conversion? Just using the math and other operations and functions?
1. Array Max & Min
2. Initialize Array with whatever value you want your DC signal to be at
3. You can just use the normal math operations on arrays
If you supply examples and show what you have tried and what you want, we can give a lot better help.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

How can I add the hard drive icon to the menu bar on a MBPr

How can I add the hard drive icon to the menu bar on a MBPr? I have downloaded Google Earth and it wants me to drag it to the hard drive for install. I was able to display the icon but now I would like to put it on the menu bar. Is this possible? Or can I add it to the hardware section under system preferences?
I'm a new Apple user, coming out of the dark ages of a lifetime in the PC Windows world.
Thanks

It's on your Desktop, is it not? You cannot put it on the menubar through OS X although you may find third-party utilities that will. If you want it on the Desktop:
Select Preferences from the Finder's Finder menu and check the desired boxes:
Click on the Sidebar icon in the toolbar to set what you want displayed in the Sidebar.

How can I add the "Profile Removal Password Payload" to a configuration Profile?

How can I add the “Profile Removal Password Payload” to a configuration Profile?
I’m not seeing an option to add this option when I edit the configuration profile within Apple Configurator.
Do I have to edit the configuration profile(xml file) within a text editor?
FYI:
https://developer.apple.com/library/ios/featuredarticles/iPhoneConfigurationProf ileRef/Introduction/Introduction.html
Profile Removal Password Payload
The Removal Password payload is designated by specifying com.apple.profileRemovalPassword value as the PayloadType value.
A password removal policy payload provides a password to allow users to remove a locked configuration profile from the device. If this payload is present and has a password value set, the device asks for the password when the user taps a profile's Remove button. This payload is encrypted with the rest of the profile.
Key
Type
Value
RemovalPassword
String
Optional. Specifies the removal password for the profile.

You have found where it is stored in Thunderbird?
Delete it. When Thunderbird needs it again, it will ask you for it.

OBN: How can we add the tcode of target system into Source System.?

Dear Experts,
I want to add a t-code ME53n of ERP) into a role as OBN target in my SAP TM.
I tried to add this t-code but could not find this t-code in SAP TM system.
How can we add the tcode of target system into Source System.?
I tries to import the role of target system but that does not work.
Please help!
Regards,
Saurabh

Hi Saurabh,
Logically there is no need to add a tcode of the target system in the source system.
If you have right roles in the system then system should allow you to add tcode in the OBN target simply by going to PFCG roles and using add transaction feature.
To make sure it works properly you have to check the Method & Parameter assignment to the newly added tcode.
Thanks & Regards,
Tarun Kumar

How can I add the number of columns/row starting with the build in "Text Report" example in the LabVIEW

Hi All,
I am wondering how can I add the numbers of row and column from the existing build-in "text report"
VI ? If possible, would you mind showing me step-by-step because I am a new user and I am not familiar with the labview software.
Thanks

Hi,
Easy text Report is for saving to a file. Do you mean you just want to add the totals of two arrays and write that? In that case I would just append the totals before writing to file.
Jeff | LabVIEW Software Engineer

How can I define the intermittency factor of a signal?

Hi everyone,
I want to ask how can I determine the intermittency factor of any signal.
The intermittency factor is a ratio of the time of high frequency distortion in the signal to the total time of the signal. So, Intermittency=time_turbulent / time_total.
I have attached an image file and original vi with source vis to show the high distortion time in blue lines. I want to determine the total time of these distortion in the blue lines. Then I will divide this total time corresponding the high level distortions in the blue lines by the total time of the signal to calculate the intermittency.
How can I achieve this? Could you please help me? Regards,
Attachments:
image.jpg ‏326 KB
Unsteady Pipe Flow Analysis_Shortened Format.vi ‏643 KB
subvis.zip ‏967 KB

mechen,
It is not clear to me whether your problem is (1) how to measure the time or (2) how to determine the presence of the high frequency distortion. The counters to which Paul B. referred are related to (1). I cannot look at your VI from home, so I do not know what you have tried.
You generally get better help on this Forum if you ask very specific questions. Asking someone to do the whole job for you, especially when you have not provided all the specifications, is much less likely to get you the help you want.
Lynn

How can I add the controller name in the subject of Alarm emails? PI2.1

How can I add the controller name in the Alarm emails in PI2.1? This would make it much easier to scan the mailbox and see what devices are affected.

Thanx for your reply. No, although helpful, that's not what I meant. In outlook, the first line of the header contains the full username follow by a horizontal line. Under that, the default headers like To:, From:, Subject: etc follow.
I need that firstline printed so we know instantly from which user the email was printed (the To: field often is the same name of the sender of the mail, therefor you won't know WHO printed it...).

How can I add the new AP license to HA 5508 WLC?

Hi,
My customer has two 5508 WLC in HA mode and these devices have 250 AP license. Customer bought 50 AP and 50 AP license. But I could not add the license to WLC! When I check the Management>Software Activation> tab there are only two options under the tab these are "Licenses" "License Usage". There is no "Command" option in there. Also I tried add on CLI but this error log appeared " !!!! Blocked: Changing License configurations on Secondary unit is blocked !!!! "
I think this is possible when disable the HA but is there anybody know this how can I add the new 50 AP license to HA WLC without disable the HA?
Thanks,
Burhan

Hi,
Thank you for your reply.
Yes I know the controllers synchronize with the enabled license and the 250 AP license bundled with two device there is no problem.
I want to add new 50 AP license in addition 250 AP license. Because customer has 300 AP's.
As I said, When I check the Management>Software Activation> tab there are only two options under the tab these are "Licenses" "License Usage". There is no "Command" option in there.
Thanks,

How can I add the audio content cd after logic finished installing ?

There was an eror installing the Audio Content CD 1 and I did not notice. Everything else installed properly, Audio Content CD 2, Jam Pack, but how can I add the Audio Content CD1 after Logic has finished installing?
If you can help me please be very specific as to how to do it so that I can follow the directions properly.
Please help me.
Thanks

Hi
You could re-run the installer, or, once you have updated to Logic 9.1.8 you could use the "Download Additional Content" function in the Logic Pro menu. It will tell you what is installed and what is incomplete.
CCT

How can I add the attachment list pdf file context to purchase order ?

Dear all,
I have use services for object in ME22N to attach PDF file to purchase order,I want to know how can I add the pdf file context to purchase order when I send the purchase order to vendor.
Thanks in advance
Best regards,
Merry

hi,
attach document through Service for Object button. Service for Object button available down side of Command screen ( in your PO screen ME22N ) .
Click your Service Object button -> Create -> Create attachment
then select your window directory ( which file you need to attach) select your file Now your system shows message Service "Create attachment" is started.
Save again your PO. You can see (open) your attachment in same field ( Service for Object ) select and Create and check attachment list. You can attach as many document in your PO.

How can i add the dimensions and data loading into planning apllications?

Now please let me know how can i add the dimensions and data loading into planning apllication without manuallly?

you can use tools like ODI or DIM or HAL to load metadata & data into planning applications.
The data load can be done at the Essbase end using rules file. But metadata changes should flow from planning to essbase through any of above mentioned tools and also there are many other way to achieve the same.
- Krish

How can I add the progress loading box when I load a module?

Hi everyone, how can I add the progress loading box when I
load a
module? Is it an automated thing with flex or must I code it?
Thanks.
:)

try using javascript onclick attribute:
onclick="document.form.name.disabled=false"
m

How can I add the key listener to JFrame

Hi,
How can I add the Key Listener to the JFrame? I want to show the Windows default popup which comes after right clicking on the frame's header. I want to add the key board support for the same

1. Make sure that key events are enabled on your component. (AWTMulticaster.enableEvents(...)
2. add the keylistener

How can I add the date at the top of the screen along with the day and time display?

Hello,
How can I add the date at the top of the screen along with the day and time display?
Thanks so much!

Open System Preferences>Date & Time:
Ciao.

How can I add the presets to new catalog or sync info to both catalogs?

I have lightroom on my main laptop was advised to create a new catalog on my external (my laptop is almost out of space). I just upload some presets to lightroom,--when I use my Lightroom catalog on my external the presets are not loaded at all. How can I add the presets or sync both catalogs. Thank you

Listener can be added to a cell editor, not cell renderer.
Set relevent cess(s) to setEditable == true when you use your custom cell editor.

How can I add the same transition to 200 photos?

I'm making a slide show of over 200 photographs. How can I add the same transition between each photo without inserting it 200 times? There has to be a way to globally' insert transitions. What if I want to modify the length of the transitions or the photos? I don't want to modify each one individually.

Daniel,
Here are some references for you for applying a transition between all photos
1)
http://www.adobeforums.com/webx/.59b4ddb1/0
will point you to a tutorial at muvipix.com
Basically you do a Create Slideshow command choosing the transition before the photos are placed on the Premiere Elements Timeline. This process also specifies the duration for the "slide" and the transition.
2)I suggest that you also read this FAQ about the resolution of photo files to be used in Premiere Elements. Even though written for an earlier version, it is still relevant (and potentially necessary) depending on the specs and status of your system
http://www.adobeforums.com/webx/.3bb8822c

How can I add the signals produced by two signal generators

Similar Messages

Maybe you are looking for