How can I add two different hyperlinks to a banner ad?

I have a banner ad that cycles back and forth between two ads, and am trying to set it up so that when the first ad is up (5 seconds or so) and the viewer clicks on it, it goes to one URL, and when it changes to the second ad and the viewer clicks, it takes them to a different URL.
I've attached the .fla file I'm trying to build. Thanks for any help you can provide!

Wow- thanks a lot! I didn't expect you to take my file and make it 
work...I just wanted to learn how to do it.
I set the frames per second back to the original 12, but otherwise 
this works perfectly. Thanks so much!
Dan

Similar Messages

  • HT204053 How can I sync two different email accounts?

    How can I sync two different email accounts? All of this Mobile Me and cloud stuff got me all flustered and now I have two accounts possibly 3.

    How to use multiple iPods, iPads, or iPhones with one computer

  • How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

    How To Using Two Different Public IP Address on My DMZ with ASA 5520
    Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
    Hi everyone out there.
    can any one please help me regarding this situation that im looking for a solution
    My old range of public ip address are finished, i mean (the 41.x.x.0 range)
    So now i still need to have in my DMZ another two servers that will bring some new services.
    Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
    So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
    ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
    So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
    on Cisco ASA 5520 v8??
    How my configuration should look like?
    I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
    Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
    attached is my network diagram for a better understanding
    I thank every body in advance
    Jorge

    Hi,
    So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
    Now you have gotten a new public IP address range from the ISP and want to get it into use.
    How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
    To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
    So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
    Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
    Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
    Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
    Of the above ways
    The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
    The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
    Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
    I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
    - Jouni

  • How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?

    hello,
    How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?
    thanks,
    Jay

    Hi,
    I understand that it applied first logo to all other sub sites.
    Please make sure that you change the logos in the subsites.
    If we change the logo in the root site, the logos in the subsites will be changed at the same time.
    However, we can change the logo in the subsites separately.
    We can go to a subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo->select a picture, then it will has a different logo than the root site.
    Then go to the other subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo-> select another picture, then it will has a different logo that the first subsite.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • How can i add two values under the same property?

    Hi all,
    How can i add two values under the same property name in a
    prop list? For example:
    [question1: "item1","item2", question2: "item3","item4"]
    To be more precise, i am creating a property list and I want
    whenever a two values have the same property name to be added int
    he list under the same property. For example:
    gMyList.AddProp (#""&question&"" & x,
    member("input").text)
    question is a variable that is updated fromt he user's input.
    Now, whenever somethign like this happens:
    question = "question1"
    member("input").text = "five"
    question = "question1"
    member("input").text = "six"
    I want to output list to be:
    [question1: "five","six"] and so on
    Any ideas?

    Maybe you could make each property a list (so you have a
    property list full
    of lists), and add multiple values to the list held in a
    particular
    property?
    Cheers
    Richard Smith

  • Can you please help me by saying me how can i join two different picture to make it as one picture.??

    Hi Sir/ Madam,
       My name is Rishav and I am facing some problem with my Photoshop CC. Actually I have a question. If you guys could help me out i will be very obliged. The quest in "Can you please help me by saying me how can i join two different picture to make it as one picture.??"

    Maybe you should post over at
    Photoshop for Beginners
    or start with the "Get Started" section of the Help:
    Photoshop Help | Photoshop Help
    And your question
    Can you please help me by saying me how can i join two different picture to make it as one picture.??
    does not seem particularly specific – do you want to simply combine two images as they are, do you want to clip elements from the one and insert them into the other, …?
    Could you post (lores of) the images and explain what you intend to achieve?

  • How can I order two different calendars from iPhoto in the same order?

    How can I order two different calendars from iPhoto in the same order?

    You cannot - the "Buy Calendar" button is only available, while viewing one calendar. You can order more than one copy of the same calendar on one order, however.

  • How can I set two different emails in only one contact form?

    How can I set two different emails in only one contact form?

    To enter multiple email address with the Contact Form Widgets:
    Click the Options icon for the selected widget, then
    In the Email to box, enter multiple emails by delimiting them with a semi-colon. For example: [email protected];[email protected]
    Cari

  • Using `n how can i add two empty line (two carriage return), between these two lines in the output file?

    hi friends
    using `n   how can i add two empty line (two carriage return), between these two lines in the output file?
    PS C:\> $env:COMPUTERNAME | add-content c:\file.txt
    PS C:\> $Env:USERDOMAIN  | add-content c:\file.txt
     i tested "$env:computername`n`n`n$env:userdomain" | add-content c:\file.txt   but it results in 
    myPCMyDomain
    but i wanted the contents of the output file be like this:
    MyPC
    #empty line here 
    #empty line here
    MyDomain
     i tested many other forms but didn't work.
    thanks

    I tried it, as well. The line breaks were respected in the PowerShell console, Programmer's Notepad, and Word; they weren't in Notepad.
    You are using a Unicode file.  Locale is what?
    If you just want notepad compatible line breaks then do this:
    del file.txt ; "$env:computername`r`n`r`n`r`n$env:userdomain" | add-content file.txt ;notepad file.txt
    Look in hex to see that `n is ^L or 0xA and is only one character.  CrLf is 0xD 0xA - two characters.
    My programmers editors and VS all understand a single ^L as a line break so does PowerShell.  Only DOS/Notepad and other utilitis don't understand this..
    ¯\_(ツ)_/¯

  • How can i sync two different ipods to one computer

    How can i sync two different ipods to one computer

    How to use multiple iPods, iPads, or iPhones with one computer

  • How can we have two different Itunes libraries on one computer?

    How can we have two Itunes accounts on one computer?  I found info on the itunes help page but I do not know how to follow the steps given because I am not prompted with what it says I should be prompted with? Please help I don't want to delete one of our libraries

    Launch iTunes with the Shift key held down as needed, or use different Windows XP user accounts.
    (74282)

  • How can I have two different windows up on one screen at the same time?

    How can I have to different windows open on my screen at one time? Kind of like a split or shared screen.

    If you want this split screen thingy for a single app, do like captfred suggests or see if the app itself supports some sort of splitting, like MS Excel.
    If you want to do this system-wide, maybe you can get what you want by activating and using Spaces: http://support.apple.com/kb/PH4313

  • How can I use two differant iphones on one itunes

    I can i use two differant iphones on one itunes, and keep the content seperate?

    You can sync as many iphones/ipod/ipads as you like to one computer.
    Each is different and is recognized as such

  • How can I have two different styles of hyperlink text on one page?

    Hi
    I'm using an external css document to control the look of my site, and would like to have two differnet types of hyperlink.
    One for within the content text, which would be the same size and style as the content text, and one that is BIGGER and BOLDER for 'title' hyperlinks.
    At the minute I have one set up for the content text, which is:
    a:link {
    color: #0000CC;
    text-decoration: none;
    a:visited {
    text-decoration: none;
    color: #666666;
    a:hover {
    text-decoration: underline;
    color: #0000CC;
    a:active {
    text-decoration: none;
    color: #666666;
    How can I set another style up for the title links without affecting the look of the content links??

    Pseudo-classes & Descendant selectors is what you're after...
    From your example, I would leave those styles for your standard links and would create new rules for the content area and then follow similar for your 'titles' or you could use Headings <h1> are they are actually headings that you want styled.
    The following is assuming that you have used a Div or a container with an ID of mainContent.
    #mainContent a:link {
         text-decoration: underline;
         color: #66CC99;
    #mainContent a:visited {
         text-decoration: underline;
         color: #66CC99;
    #mainContent a:hover {
         text-decoration: none;
         color: #333333;
         background-color: #FFFFFF;
    #mainContent a:active {
         text-decoration: underline;
         color: #66CC99;
    For another area of the page, say a left sidebar and gave it an ID of #leftcolumn 
    (I've used the same styles for easier copying pasting, but naturally, you would style then differently)
    #leftcolumn a:link {
         text-decoration: underline;
         color: #66CC99;
    #leftcolumn a:visited {
         text-decoration: underline;
         color: #66CC99;
    #leftcolumn a:hover {
         text-decoration: none;
         color: #333333;
         background-color: #FFFFFF;
    #leftcolumn a:active {
         text-decoration: underline;
         color: #66CC99;

  • How can we manage two different itab in ALV

    Hi Experts,
                   I have a requirement where i need to convert classical report to ALV Grid. This report outputs two different itab with different columns (structures)
    Example like...
    <u> Costs</u>
    1. 2. 3. 4.
    <u>Revenues</u>
    1. 2. 3.
    Appreciate your  ideas how can this be done to fit into one ALV grid .   
    Is this possible?
    Ravi.

    Hi,
    You can use the class cl_gui_splitter_container and split the container in two rows, one row for costs and the other one for Revenues.
    Something like this:
    data: obj_splitter TYPE REF TO cl_gui_splitter_container.
       g_custom_container TYPE REF TO cl_gui_custom_container,
       g_cont_req TYPE REF TO cl_gui_container,
       g_cont_det TYPE REF TO cl_gui_container.
    Create container instance
      CREATE OBJECT g_custom_container
          EXPORTING container_name = 'ALV_CONTAINER'.
    Split container
      CREATE OBJECT obj_splitter
                   EXPORTING parent  = g_custom_container
                             rows    = 2
                             columns = 1.
    Get reference to row 1, Column 1
        CALL METHOD obj_splitter->get_container
          EXPORTING
            row       = 1
            column    = 1
          RECEIVING
            container = g_cont_req.
      Get reference row 2, Column 1
        CALL METHOD obj_splitter->get_container
              EXPORTING
                row       = 2
                column    = 1
              RECEIVING
                container = g_cont_det.
    Set height of row 1
    Add
        CALL METHOD obj_splitter->set_row_height
          EXPORTING
            id     = 1
            height = 60.
    Create Object AVL with reference to container row 1,
    column 1
        CREATE OBJECT alv_grid
          EXPORTING i_parent = g_cont_req.
    Create Object AVL with reference to container row 2,
    column 1
          CREATE OBJECT alv_grid2
           EXPORTING i_parent = g_cont_det.
    Then you should continue like in ALV grid, to show data with method set_table_for_first_display
    For the first row:
          CALL METHOD alv_grid->set_table_for_first_display
              EXPORTING
                        is_variant       = gs_variant
                        i_save           = x_save
                        is_layout        = gs_layout
              CHANGING
                        it_outtab        = i_zdocument
                        it_sort          = i_sortcat
                        it_fieldcatalog  = gt_fieldcat.
    For the second row:
       CALL METHOD alv_grid->set_table_for_first_display...
    Regards,
    Alejandro.

Maybe you are looking for